There was a problem loading of files that can be restored

Similar Questions

• After the mistake of automatic updates 'there was a problem loading windows.

  OT: Error loading Windows.

  Error loading Windows, it's where my problems began. Windows was its automatic update downloads and when he finished and my computer says to restart when it restarted I got the message 'there was a problem loading of windows', and that's where it ended. For three days I would continue to try to restart my computer, and I had the same thing. Windows would not be responsible.

  So, I did a refresh, or everything what he called where he was supposed to completely refresh Windows without my lose all my files, but I have to re - install programs. It took forever for that to work, but he finally did and my computer was back to Windows 8 and when I went to the Windows store to download Windows 8.1 told me that I had to first download and install the updates. From that moment nothing works. It finally downloaded 123 updates up-to-date, but when he tried to install it like configuration updates do not turn off your computer. It would get 12% full and just stand there, literally for hours. If I turn off the computer and try to start again he would go immediately to the configuration updates, 12% complete and even once, just to stay there. Then he got to ' default configuration windows updates returning changes do not turn off your computer. " Now he sits there for hours. I tried turning stop then restart and it goes immediately to the failure message and returning change and just sits.

  What I'm doing, I've been without this computer for three days. I'm on my mac now, but my personal computing is done on the pc that will not start. Windows is undesirable. Someone help me please. I got so frustrated that I am about to go out and just buy a new computer.

  Help!

  If it was my computer, I would do a factory reset is in mint condition, only install the required update, KB2871389 (download links above), then immediately install the update 8.1 and the remaining plots.

  After these 4 things, the only thing I would do is then to save a system image backup so you never have to repeat these steps.

• There was a problem playing this file. (0xC00D0FEA: "Windows Media Player has encountered a problem during the download of the file.) For any additional help, click Help on the Web. »)

  Outlook has been changed from hotmail, my emails say don't link with windows media player, outlook is not their problem, but it happened only when they merged account

  I have to be able to open MP3 files that ae sent emails in my work, it's urgent, please I need to know what settings to correct to sort this please

  It comes to getting the error message

  There was a problem playing this file. (0xC00D0FEA: "Windows Media Player has encountered a problem during the download of the file.) For any additional help, click Help on the Web. »)

  E-mail address is removed from the privacy *.

  Hello

  Method 1:

  See the article and check if that helps:

  Windows Media Player sync: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

  Method 2:

  I suggest also refer to the thread with a similar problem and a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/error-when-trying-to-play-media-files-Windows/4abe7be7-b3fe-44eb-b4da-e0848c3c8bd4

  It will be useful.

• Ripple said: there was a problem loading webworks.js

  I'm starting with BB10 WebWorks. I downloaded 2.3 Phonegap, implemented the project example, hosted locally using MAMP and opened in Chrome with ripple.

  Ripple alert "there was a problem loading webworks.js" and the chrome console shows that GET local:///chrome/webworks.js failed.

  Other things may be related:

  -Cordova record ' Unknown user agent! by default, java' to the console.

  -"The target-densitydpi window is not supported." has been connected to the console. I removed the target-densitydpi of the viewport meta tag setting and he stopped to complain.

  I use v0.9.13 ripple in Chrome 24.0.1312.57 on Mac OS X 10.8.2 (Mountain Lion).

  Hey,.

  I think it has something to do with the platform you chose. I'm assuming you have chosen that option Phonegap for the platform and because of this ripple is not import the library of webworks he needs. I think you are going to choose one or the other. With the help of phonegap and compiling with webworks will work - u just need to take the line of local:///webworks.js and it should work. Do not know what are the reprecussions - have never used Phonegap.

• I get the message "there was a problem opening your file" when I try to move an image from my Mac PSE9. This happens even with the pictures I imported to PSE before 9. I use Mac OS 10.10.5?

  Why do I get the message "there was a problem opening drop you off", when I try to import an image to the form of PES 9 photos on my Mac running Mac OS 10.10.5, even if this image was imported before?

  Move the thread to Photoshop Elements

• There was a problem starting msiihy32.dll that the specific module could not be found?

  When I start my computer, I got this message there is a problem starting msiihy32.dll the specific module could not be found, and I downloaded the msiihy32.dll, but still have the message so what can I do?

  Hello

  Where did you downloaded it go?

  Google has little information about this file, so it's probably a Malware startup more entry left which has been removed from your security programs.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  «How to use MSCONFIG in Windows 7»

  http://netsquirrel.com/Msconfig/msconfig_win7.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• In the browser of Muse CC edition there was a problem reading the manifest file Adobe Muse CC for the site - how to fix this?

  I just uploaded the site via the built in ftp upload in muse he then uploaded successfully. When I go in the edition of the browser and enter the name of the site (mernaliddawi.com) it says then this "there was a problem reading the file of Adobe Muse CC manifest for the site. Since Adobe Muse CC use file > load on the FTP host... to export the new site. ' I then exported the site again, but it still does not work also, I went my hosting provider file manager and deleted the file muse_mainfest.xml and then re uploaded still no chance. " How can I fix this thank you, james.

  You need to transfer your domain to your new site. At present, the URL http://mernaliddawi.com/ is a web page that encapsulates the http://mernaliddawicom.ipage.com/ in a frameset. This isn't how a domain is successfully transferred. He doesn't bother with editing in the browser, will prevent redirection to versions Tablet and phone of your site (if you create), and can cause other problems.

  If you enter mernaliddawicom.ipage.com to inbrowserediting.adobe.com it will not work, because this is the URL where your site is currently hosted.

• Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  If a shortcut is used while Firefox is already open the error will not occur.

  For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

  Hope this helps.

  Olivier

• There was a problem sending the command to the program - excel windows 7 that no shortcut will open - open, if I click Open in the file menu

  There was a problem sending the command to the program - excel windows 7 no shortcut will open - will be opened only if I click Open in the file menu

  See if the answer of "CardSolve" helps.

  There was a problem sending the command to the program by double clicking on a file. :
  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/8c870808-A108-47cf-8464-9f84427b624a

  Ramesh Srinivasan . The Winhelponline Blog
  Microsoft MVP, Windows desktop experience

• Using Autodesk Architecture 3.3 and opening a working file, I get the error message error "there was a problem sending the command to the program".

  When using Autodesk Architecture 3.3 and opening a working file, I get the error error message "there was a problem sending the command to the program". What does that mean? At the same time (or nearly the same time) trying to create a pdf from a drawing file is suspended the program autodesk. These two worked before.

  Hello

  The question you posted would be better suited to the Forums from Autodesk. I suggest you post here for better support.

  Here is a link:

  http://forums.Autodesk.com/

• Netflix in Media Center returns a 'there was a problem of data recovery. "Check the works of your internet connection and try again" error instead of loading Netflix data.

  context: a previous thread with an identical title never responded, the problem just disappeared.  Well its been two weeks since then and the problem came back.

  somethings which may or may not apply: internet TV seems to work better in media center.  All updates have been applied to H.P. of Vista SP2. Netflix works fine in ie8 (such as the internet, of course). Tried to delete all the Internet Options, delete browsing history section of Internet Explorer. I get the same error message with my windows 7 professional media center, but netflix seems to play anyway (no game with vista). I recently installed quicktime alternative 2.72 to see what it was and how it worked, then removed and put back in quicktime.

  Tried / symptoms:

  -Remove all the browsing history (econcepts)
  -Same message on Win7pro but works even when (econcepts)
  -Works on Win7 no problem (omegafiler)
  -Works in ie 8 (econcepts)
  -Works in crome (Martin TX)
  -Consensus is that it started around December 30, 2009 (GeoffG1, johnetX, me)
  -Remove and reinstall silverlight (omegafiler)
  -Remove and replace netflix plugin (omegafiler)<- how="" did="" you="" do="" that="">
  -Netflix says: microsoft problem (Nitestalker)
  -Microsoft is silent (this thread - on vacation?)
  -Same problem on 32-bit and 64-bit VMC (JRSMiamiFL)
  -No applied update (johnetx)<- perhaps="" date="" related="" or="" drm="" date="">
  -Disconnect from netflix, you reconnect again - ultimately the same error (chicagokiwi)
  -Tried to reduce the number of items in the queues to well below the limit of 200 (econcepts)
  -Tried the register / unregister the third wire procedure, no joy (does not break anything else however)
  -Disabled the firewall, no change (econcepts)

  related topics:
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/0c154c0a-1fcb-4353-8c5e-b394e885256d

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/aaab24a0-4BB9-42FA-a5ee-46a733d6560f

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f05f69c7-6456-4117-B302-27c08886ea1e

  Someone else knows Netflix not being is not able to connect?  It started yesterday (30/12/2009) for me.  I looked fine the day before without problem.  The message I get says "there was a problem of data recovery.  Check the works of your internet connection and try again. Ok.  I make it work with both my VMC - one with the service pack and the other without.  My OS updates have been loaded in early December, so I don't see how this could it be.  I searched and found this problem has come up before, but I have not found a solution.  I made NO changes to my HTPC.

  Those who have and solved this problem.

  UPDATE UPDATE UPDATE UPDATE UPDATE UPDATE *.

  2009-01-05 has attempted to start Netflix this morning and you know, it works on both my VMCs.  That's the good news.  So now the real questions are:

  Only 20 people reported it as a problem and only 6 on the green button.  I believe that it affected all the world with Media Center.  So why not discussed much?

  It already happened, causes a stir and silently slips without known cause or cure.  How can we find out what caused this and how to prevent it from happening again in the future?

  *******************************************************************************************

• Windows error message family Assistant "there was a problem that caused some parts of Windows family Assistant must be turned off."

  Hello

  I received an error message after logging in to my computer saying: "there was a problem that caused some parts of Windows family Assistant must be turned off." Not maybe not able to connect to a Windows Live in some programs. The problem may be due to a recent program that was installed. I don't know what caused this message. Any advice on what to do are greatly appreciated.

  Thank you

  Jennifer

  Hi Jennifer,.

  You might face this problem on the Windows live service runs before Windows loads. This creates a conflict so you get this error. I suggest you follow the steps indicated by ¡Firedog as dated

  June 16, 2014.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-ECOMS/Windows-Live-ID-sign-in-Assistant/f84d1a67-858e-4DC0-AD10-f06bf41f0b5d

  If you follow always the same question, you can follow the steps in the link below.

  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail-wlinstall/Windows-Live-ID-sign-in-Assistant-to-be-disabled/49a8ad70-f645-4e73-BAAA-d4485dddb354

  Let us know if you need additional assistance.

• Whenever I try to start IE 11 I get an error message RunDLL, 'there was a problem starting C:\Program Files (x 86) ".

  Whenever I try to start IE 11 I get a RunDLL error message, ' there was a problem starting C:\Program Files (x 86) \Settings Manager\systemk\sysapcrt.dll.

  Hello

  I'm glad to hear that your problem is solved. What happens when you try to install updates?

  Run the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-GB/Windows7/open-the-Windows-Update-Troubleshooter

  Thank you.

• There was a problem from C:\Program Files (x860\Conduit\CT3279414\plugins\TBVerifier.dll

  I download a program with a virus and I removed the virus, but I think that I also removed a dll with her. So now, at the start, I get this message with it:

  "There was a problem starting C:\Program Files (x860\Conduit\CT3279414\plugins\TBVerifier.dll" how to remove this problem?

  Hello

  Read the information on your problem in this thread:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/TB-Verifier-error-message/6e00a9a2-08f4-4a31-8774-e683330bdefd

  And follow these steps.

  It's probably a Malware starting entry left which has been removed from your security programs.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  «How to use MSCONFIG in Windows 7»

  http://netsquirrel.com/Msconfig/msconfig_win7.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• HP Officejet Pro 6830: there was a problem starting C:\Program Files\HP\Officejets AM\bin\States.dll

  WIndows 10 appears the following start-up error message

  There was a problem starting C:\Program Files\HP\HPOfficejetPro8600 A910\bin\HPStatusBL.dll

  I no longer the 8600 and uninstalled all the software of 8600, it is no longer present in the devices and printers.

  My new printer works fine, just do this nnoying message whenever I start.

  I am confused why this would not appear in Task Manager startup programs if it opens at startup. Let's try another method of attack:

  1. press on the Windows key + R to open the Run dialog box.

  2. in the field open, type %AppData% , and then press enter.

  3. go to Microsoft > Windows > Start Menu > programs > Startup.

  4. look for anything that has to do with "ink monitor alert" and delete it.