Problems - not the same as the other each of these positions in HDMI output!

Similar Questions

• WMA file played on a PC, not the other

  I have two PC and can play WMA files on one and not the other.  One who does not play the weird before stopping blip.  There is no error message.  Both are Windows 7 PC - it makes my head for awhile to help very welcome.

  Thanks in advance

  The codecs on one that works are:

  * Microsoft Corporation OK C:\Windows\system32\IMAADP32 c:\windows\system32\imaadp32.acm. ACM 6.1.7600.16385 21,50 KB (22 016 bytes) 2009-07-14 01:18
  c:\windows\system32\l3codeca.ACM Fraunhofer Institute Integrierte circuits IIS Fraunhofer IIS MPEG Layer - 3 Codec OK C:\Windows\system32\L3CODECA. ACM 1.9.0.401 79.50 KB (81 408 bytes) 2009-07-14 01:22
  Microsoft Corporation C:\Windows\system32\MSADP32 OK c:\windows\system32\msadp32.ACM. ACM 6.1.7600.16385 23.50 KB (24 064 bytes) 2009-07-14 01:18
  Microsoft Corporation C:\Windows\system32\MSG711 OK c:\windows\system32\msg711.ACM. ACM 6.1.7600.16385 14.50 KB (14 848 bytes) 2009-07-14 01:18
  Microsoft Corporation C:\Windows\system32\MSGSM32 OK c:\windows\system32\msgsm32.ACM. ACM 6.1.7600.16385 28,50 KB (29 184 bytes) 2009-07-14 01:18

  The codecs on the one who does not work are:

  Audio codecs

  Type	Name	Format	Binary	Version
  ACM	Microsoft IMA ADPCM CODEC	0011	Imaadp32.ACM	6.1.7600.16385
  ACM	Law Microsoft CCITT G.711 A - And u - Law CODEC	0007	msg711.ACM	6.1.7600.16385
  ACM	CODEC Audio Microsoft GSM 6.10	0031	msgsm32.ACM	6.1.7600.16385
  ACM	Microsoft ADPCM CODEC	0002	msadp32.ACM	6.1.7600.16385
  ACM	Fraunhofer IIS MPEG Layer - 3 Codec (decode only)	0055	l3codeca.ACM	1.9.0.401
  ACM	Messenger Audio Codec	028F	sirenacm.dll	15.4.3508.1109
  ACM	LAME MP3 Codec v0.9.2 - 3.98.2	0001
  ACM	DivX ;-) Audio compressor	0161
  ACM	Microsoft PCM Converter	0001
  DMO	WMAudio Decoder DMO	0160, 0161, 0162 0163	WMADMOD. DLL	6.1.7601.17514
  DMO	WMAPro over S/PDIF DMO	0162	WMADMOD. DLL	6.1.7601.17514
  DMO	WMSpeech Decoder DMO	000D, 000 B	WMSPDMOD. DLL	6.1.7601.17514
  DMO	MP3 Decoder DMO	0055	mp3dmod.dll	6.1.7600.16385

  Hi Christopher,

  Thanks for posting your question in the Microsoft Community.

  I understand that the file Windows Media Audio (WMA) plays on PC, not on the other. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will try to help you in the matter of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. what player you use to play the WMA file?

  2. using Windows Media Player to play the WMA file?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  4. If you use Windows Media Player, then what is the version of it?

  If you use Windows Media Player to read the WMA file, then please follow the methods and mark the question below:

  Method 1:

   

  Step 1:

   

  Run the Microsoft Fix It from the link below.

  Solve the problems of Windows Media Player video and other media or library:

  http://support.Microsoft.com/mats/windows_media_player_diagnostic

   

   

  Step 2:

   

  Follow the steps in the link below.

   

  Open the troubleshooter in the Windows Media Player settings:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

   

  Open the troubleshooter in the Windows Media Player library:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

   

   

   

  Method 2:

   

  Uninstall and reinstall Windows Media Player to Windows features turn on or off.

  Follow these steps:

  (a) click Start, type the turn Windows features on or off in the start search box and press enter.

  (b) uncheck the features of media.

  (c) restart the computer and follow the same steps to reinstall Windows Media Player.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Method 3:

   

  Install the latest codec in the link below and check off the question:

  Codecs: Frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

   

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

   

  For reference:

   

  Play an audio or video file: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/play-an-audio-or-video-file-frequently-asked-questions

  Windows Media Player, frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-frequently-asked-questions

   

   

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

   

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

• Flash Player crashes a pc but not the other

  I have two PCs each running xp sp3.  Players of Flash in Chrome and Firefox crash one of them, but not the other.  Obviously something is different between the two computers, but how can I evenbegin to understand what he.  I've seen a lot of posts on Flash crash peoples computers and no satisfactory answers to my problem.  Thanks for responding.

  First thing to try on the computer crash is to disable hardware acceleration (http://forums.adobe.com/thread/891337).

  If this resolves the problem, then you should update the drivers for your graphics card (and re-enable hardware acceleration).

• SWF is MIA on a field, but not the other?

  I have a modest Web page which I use primarily to set up the occasional photograph of the family:
  
  http://www.staggclan.com
  
  .. .and that contains a Flash xreferencing file a Flash video. That's what it is supposed to look like: http://www.dfwaug.net/test/index.html.
  
  As you can see - the video works very well in this last example (it's the same hierarchy). But why don't you see the video on my site? You can take a look at the source for staggclan.com on this page and you can see that I'm NOT xreferencing my hard drive and I am referencing an image that has not been downloaded (although I was - you would see at least one indicator 'broken image'). It does not even include space for where this video should be - it's as if he was not yet placed there.
  
  For the life of me I don't know what the problem is. Why is - that will work in a field, but not the other (both hosted by 1 & 1. com)? One who can correctly solve this problem for me will find me ETERNALLY THANKFUL.
  
  All the best.
  
  

  I'm just using DW8 to insert this .swf on a page. Obviously, I had deleted by mistake the "Scripts" folder is published with the course when I put on my server - so - no multimedia.

  Its a long time I have been using DW since now, we mainly use eLearning software rapid development. Gawd how I miss DW. Fortunately, I get to 'play' with it from time to time on the home front and have since updated my 'official' home-homepage which is now showing the video correctly:

  www.staggclan.com

  It was certainly a learning experience...

  Kevin

• My Nano Gen 7 is recognized on a single computer, but not the other

  My Nano Gen 7 is recognized on a single computer, but not the other.  I went through all the troubleshooting tips.  Different cables, try all USB ports, uninstall/reinstall itunes, etc.  I have itunes more up-to-date software.  I was able to connect the ipod to my backup computer and confirmed that I also have the software more up-to-date on the ipod.  Since I am able to connect to it, I also did a factory reset the iPod, but it still wouldn't connect to my main computer.  Nothing has worked.  I think there must be a setting on my pc.  I use the latest version of windows 10.  Any suggestions are welcome.  Thank you

  I just bought an Ipod Nano 7th generation and itunes does not recognize it.  Had by all the standard troubleshooting (uninstall/install itunes, etc.) and no luck.  My PC recognizes, he calls the 'nano' but acknowledges as a USB mass storage device.  I spoke to a support person from apple for more than an hour to help me troubleshoot it, finally they just said it was a windows problem, and I need to contact Microsoft.

• Just got 2 of SE. Weather app works on one but not the other.

  Just got 2 of SE. Weather app works on one but not the other. Ideas?

  Drosea,

  Define/describe does not.

  What's the weather App?

  

• Audio in a timeline yet, but not the other?

  Hello

  I am trying to solve a problem in a timeline yet for Blu - ray with a MPEG2 and AC3 file.  It's weird because with the exact specifications of the same file for the video and audio, I'm able to hear the audio from the test project calendar (short term), but not the project calendar full length (about an hour and a half in duration).

  I'm burning a disk to verify that audio is just not there, rather than a problem reading with the project any longer, but can anyone suggest what may be broken here?  Again, the two projects seem to be identical in the parameters and specifications file for the video and audio, only the duration of a (work) is shorter than the other (does not).

  The audio file has been posted outside still like audio playback.

  Thank you for all what thoughts - what someone might have here.  BTW, the project has no menu screen.  That's a 'read only' Blu - ray disc

  Mtbakerstu

  That shows the status of transcoding of comics for each importing audio?

  Confirm that it is import and not dynamic link.

  How do you know that the file specifications are identical?

• Double disc HARD MacPro boots on one, not the other

  I have a MacPro 2008 with two drives hard bootable. We have OS x 10.6.8 Snow Leopard and the other Mavericks 10.9.5. I use the first for my daily work and the second opportunity for LogicPro.

  The drive of the Mavericks has stopped booting and I don't know how to fix it. It appears as an option if I hold the alt key after the Gong to start, but if I select it, I just get the gray Apple logo screen for several minutes and eventually Mac starts on Snow Leopard disk. The two drives appear in the startup disk pane in the Control Panel, but by selecting the Mavericks an and the reboot leads to the same result.

  The volume of the Mavericks is visible from Snow Leopard, I can open the files subject to the permissions of the user, so I can't to my Logic Pro files. I had some weird user account problems when I installed the Mavericks on the second disc of the first and had to set up a new Userid on it.

  I ran disk utility (when it is started from Snow Leopard), which notes that the Mavericks drive is OK. I ran repair permissions and the ERD; the first made many changes, this last, no.

  I tried to reset the PRAM.

  I tried out the Snow Leopard disc there is only the Mavericks in the Mac.

  In case it is relevant, Snow Leopard is sitting on a 960 GB SSD, Mavericks on a classic 500 GB drive (which was the original drive provided with the Mac). The content of all the two have been cloned at least once using Carbon Copy Cloner through other intermediate readers, and both worked very well several times in the current configuration since the cloning of the last.

  I still have a disk of 250 GB which was the first facility of Mavericks/LogicPro and could restore but would not be able to get to any LogicPro project since this swap.

  Any suggestions please?

  Reinstall OS X without erasing the drive

  Make sure that you have a current backup before continuing.

  Boot to HD recovery: restart the computer after the ring, press on and hold the COMMAND and R keys until the menu screen to appear.

  Repair the hard drive and permissions: at startup, select in the main menu disk utility. Repair hard disk and permissions as follows.

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab, and then click the repair disk button. If disk utility reports any errors that have been corrected, then again run repair disc until no errors are reported. If no errors are reported, click repair permissions . Wait until the operation is complete, then quit disk utility and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than Wi - Fi and more reliable.

  
  

• Build the name of guard of the table of the last element, but not the others. Workaround solution?

  Hello

  Sorry if this has been posted before, I did the search first, but can't find anything.

  Problem is that I have two configurations which are identical and must be ordered by a single vi. Given that they are the same, they are configured with the same sets of parameters so I decided to create a cluster of these and then build an array of clusters. In this way I need to use only a thread and if I need a given parameter I can get it easily from here (or so I thought) and also because I need to see if anything changes I can compare a thread instead of each of the parameters.

  The gui has the list of parameters, then in the block diagram I group them appropiately, using "Bundle name" and then each bundle in a table by using "build the table. Problem is when I have the index in the array for the first place of the configuration and usage to unbundle the parameters I need, using "ungroup by name" (although if I use "Unbundle" the same thing happens) and lo and behol, the output names come from the configuration of the second, not the first.

  Here's the curious thing, though, even if the names are all wrong, that the values are correct. I could live with that, but it's more boring it will be another very difficult user to understand the schema more this is just a proof of principle to test with two, eventually there will be eight or more and who's going to get really confusing.

  Is there a way to get around this? Even if it is to change the names after unbundling.

  Check the attached vi to see what I mean.

  I think you forget an important point on the tables.  The only thing that may be different between each element of a table is its value.  The elements in the array must all share the same properties.  This would therefore include the names of the different elements that make up the cluster that is a table element.

  It seems that the last group that builds in the table is the one that defines the names of the items that are in the element of the cluster.  You must give all elements of the array with the same name within the cluster.  Or use a cluster of clusters rather than a table of cluster to create your data structure.

• Can access folder on a computer, but not the other

  I have a vista computer that has a folder that I want to join.  I have 2 computers newly built win7.  I can access the folder on the vista computer with win7 computers only.  I went through everything I can think of and all settings appear to be identical between the two platforms of win7.  I took a peek in the management of the computer sessions and my computer with win7 I can't access it from is listed as a guest, not my user name.  I have no idea why, all the comp have same login name, password and admin access.  I have disabled guest accounts.  It's the only thing I can find different between win7 computers which could explain why I can't access the folder in question.

  Anyone know how I can transfer my network setting win7 rig with access to the other without, or fix everything that's wrong with my access rights so that I can get the folder I want?  I can see the drives and folders that I shared.  I can not open them, I get one you don't have permission to access this folder message.  I have everything I can find associated with sharing turned on (except the password) and everything related to the firewall disabled is trying to access.

  Thanks for the pointers you can give me.

  Hi Dave68_31,

  This could be a problem with the permissions of files and folders.  The following procedure will help you change the owonership and permissions of files and folders.

  1. right click on the file or folder, click Properties, and then click the Security tab.

  2. click on Advancedand then click the owner tab.

  3. click on Editand then do one of the following:

  o to change the owner to a user or group that is not listed, click other users and groups , in area enter the object name to select (examples), type the name of the user or group, and then click OK.

  o to change the owner to a user or group that appears in the area of change of ownership to , click the new owner.

  4. If you want to take ownership of the contents of the folder, select the checkbox replace the owner of sub containers and objects .

  5. click OKand then click Yes when you receive the following message is displayed:

  You are not allowed to read the contents of directory folder name. Do you want to replace the the directory permissions with permissions granting you full control?

  All permissions will be replaced if you click Yes.
  
  Note folder_name is the name of the folder you want to take charge.

  6. click on OKand then reapply the permissions and security settings that you want for the folder and its contents.

  For your Information

  Ø an administrator can take ownership of any file on the computer.

  Ø assignment of ownership of a file or folder can require that raise you your permissions using user access control.

  Hope this has been helpful.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Able to add colspan with jQuery to table on one page, but not the other.

  I am able to use jQuery to add an attribute colspan to one of the rows in the table on a regular with products catalog page, but when I try to do a catalog that has instead of product catalogs, I see not the colspan attribute when I inspect the lines of the table.

  The catalog I'm talking about is http://www.thesanfordcenter.NET/suite-menu . The catalogue is secure. I have set up a temporary account and a password if you want to view the pages.

  ID: test

  Password: account 1

  I wonder if this is a problem with my jQuery or maybe what layout, I have jQuery on. Any help would be appreciated. Thank you.

  This page has some errors coming JavaScript on it.  If you press Ctrl-Shift-J or Cmd-Shift-J on a Mac in Google Chrome you will bring up the javascript console.  Anything in red is usually a javascript error or a 404 error for assets that are not found... you should always try to clean them.

  In this case, your "expstickybar.js" file is loaded on this page, and he introduces a "jQuery.noConflict (); statement that basically removes the possibility of using the variable ' $' as a quick trigger jQuery methods.  This is not the case on the pages of your catalogue main is because you only reference this script with a relative url: 'expstickybar.js', so when you are on your catalog at http://www.thesanfordcenter.net/suite-menu/appetizers page then it is looking for your javascript to http://www.thesanfordcenter.net/suite-menu/appetizers/expstickybar.js files so it is not find it is coming as a 404 error.

  A fast solution would probably be to try to remove or comment on this first line in expstickybar.js that says "jQuery.noConflict ();".  This might work, but it is also possible that it will break your expstickybar.js script. If this does not work, you should probably go into each of your statements of jQuery in your pages and wrap them up in a function that explicitly said to use the variable "$" for jQuery:

  (function ($) {}

  YOUR OLD JAVASCRIPT HERE

  (}) (jQuery);

  On a side note, also included two libraries jQuery in your site and that is never a good idea... you have jQuery 1.4.2 loading in the HEAD of your page or the page template and then you are also to load jQuery 1.6.2 in the BODY of your page or your page template.  You must use one or the other.  1.4.2 is old enough now, so if I was you, after you try to correct the mistake of jQuery.noConflict () you have got going, you need to move this jQuery 1.6.2 reference in your BODY element and replace it with jQuery 1.4.2 marked in your HEAD.

  Also - you should change your reference in your page templates to make the "expstickybar.js" a URL relative to the root instead of a relative URL of the file.  Change:

• kind of artifacts/trails made on a PC, not the other

  Hello!

  We need PCs with After Effects CS5 (#s different series) running. We the there are almost always problems with a kind of artifacts. The whole project is a mixture of In-front-of-the-Camera-Videos of a person and screencasts. There is often the mobile mouse trails in screencasts. It is not in the film and when I open the project on the other PC we don't have this problem.

  It's the 'PC problem:

  Intel Xeon X 5550

  24 GB RAM

  Windows 7 64-bit Sp1

  NVIDIA Quadro FX 1800

  QuickTime 7.7.2

  The work is:

  Intel Core i7 860

  8 GB RAM

  Windows 7 64-bit Sp1

  ATI Radeon HD 4550

  QuickTime 7.7.2

  I put a sample of the video here, where you can see what I'm trying to explain:

  https://DL.dropbox.com/u/78392956/ab_040400_C4.MP4 (rendered on the PC)

  https://DL.dropbox.com/u/78392956/ab_040400_CK.MP4 (rendered on the problem PC)

  I tried to turn OpenGL, multiproceccos and so on and have the latest drivers for the NVIDIA card.

  Someone at - it ideas what is happening? Any help is appreciated!

  Thank you

  Herwig

  It is not in the film and when I open the project on the other PC we don't have this problem.

  In fact, it's probably. You are very likely to have different versions of the relevant on systems Techsmith CoDecs (if that's what you use). Be sure to install the same versions of Camtasia or whatever on both systems.

  Mylenium

• "Folio" DPS dashboard: we're working, not the other!

  Hi all

  I did 2 activities to incorporate in the DPS with edge.

  The fist one working properly! I put the other in another article... I see that the final phase.

  So I tried, with the same structure to change the embedded web content to point to the first.

  So the problem lies in the animation.

  Any idea what this may be?

  I just put a background to fade to the black and then 8 images sliding horizontally with effect of ease back to their final position, it is an animation of 3 seconds!

  Strange thing also is that if I saw the article only (not to the folio) and with the Office Viewer, she worked...

  Thanks for your help

  The value of the retard.125 seconds.

  Bob

• Audio in Premiere Pro CS3 appear on a PC, not the other

  Hello world

  I am the network administrator for a school and we have a Digital Media Lab here using Adobe Creative Suite 3: Master Collection.  All systems here are running Windows XP Professional and on a Windows domain.  All users are standard users, without administrative rights for obvious reasons of security.  When I made originally of the deployment of the lab by running sysprep on a reference computer and use ghost to deploy the rest of the computers, I noticed a problem with Premiere Pro CS3 after deployment.  In this laboratory, none of the computers would capture video via firewire and built it based on capture in Adobe Premiere CS3.  I think I have a post about it on these forums that was never solved.  To work around this problem, I capture images for students in my office and transfer it on to their readers of network so that they can import it into Premiere Pro CS3 and edit images.

  Recently, the school bought a few HD cameras that record a built-in hard drive or an SDHC card.  The idea here is that the. MTS files could come from the camera to the computer running Premiere Pro CS3, media files in. Format MTS [1280 x 720] could be converted to help Free HD Converter from KoyoteSoft using the settings [preset] MPEG2, MPG2 as format, 1280 x 720 / / 16: 9 29.97 FPS, video rate 9000 and 224 audio bitrate, and then the media new files can be imported into Premiere Pro CS3 and edited using the HDV preset in Premiere Pro CS3 720p30.

  It works fine on my desktop computer.

  The problem is that if any student tries to import their images on a computer in the laboratory of digital media, the converted media files, exact same those who just imported in my Premiere Pro CS3 installation on a computer in my office with the same material as the computers in the lab of digital media, fail to import the audio.  I can see the video without any problem in the lab, but no audio layer is displayed.  If I click with the right button on the video file and choose open with > VLC or other media player, the media play with audio.  All audio and video codecs installed on my machine are also installed on the machines of digital media.  If I right click on Adobe Premiere Pro CS3 from a student on these computers account and choose Run as and use the account administrator, Premiere Pro CS3 does exactly the same thing, he can't yet see the audio.  Adobe CS3 is perfectly up-to-date on my desktop computer and all computers of digital media.

  Any help solving this would be greatly appreciated, spring break is coming here next week and I'll be here all week.  Hoping to get this resolved during this time so that students can edit their own films.  Again, importing video, audio is not.  No audio layer is displayed.

  Thank you!

  See if that helps... To work with audio files AC3 into Premiere CS3, copy the file ad2ac3dec.dll of the Encore CS3 directory creation directory

• Why my message a confirmation of reading on a device and not the other?

  I use my iMessage on my iPhone 5 and my Macbook Air, however, sometimes when I send a message from a device it shows a read receipt to the other person on my mac, but not on my iPhone. The message on my iPhone remains as "delivered" much later and then seems to be read (I'm done yet receive confirmations of reading on my phone), but my mac delivers the message, and it seems that the message has been read afterwards, but it shows the path of the read receipt before my iPhone don't. I don't know if it's just one little problem and they have not actually read the message, or if my mac book is somehow showing the first read receipts?

  Hello

  It has to do with which ID is used to send the iMessages and what devices are then synced to see this info.

  Device sending roughly see the pronouncement to feedback.

  If it's the Mac using the Apple ID it will 'see' the 'read' first response.

  However, if the Mac uses the iPhone number to send, then some info can run on the iPhone first it's the device the number belongs to.

  The Mac is only then light "Copies" of the synchronization version.

  Add to that the fact that some people will have a device set to join read receipts and not another.

  It is basically not a precise answer that there are many factors that can influence it.

  

  20:45 Thursday. 26 May 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)