Problems of driver LAN and USB in Windows 7 / 64-bit

Similar Questions

• OfficeJet 6500 and USB on Windows 7 64 bit does not (wireless works fine)

  Hello world.

  New printer. WiFi Of my different laptops works very well. However my main system is not in wireless. Try to install via a USB port. When I plug the printer Windows 7 sees it but I can't get the drivers to install correctly to where I can use fax/scan options. I can print, but I can't do anything else. If I go to the device, the printer appears with the correct name, but says that the driver is not installed. If I try to install manually (using the disk) it barfs and says that the driver is not digitally signed.

  When I run the installation of the software (I downloaded the new installation driver package Basic and full) and I get to the point he wants me to plug the printer, it starts the installation but then Windows barfs and said "no driver found" and then the HP installation fails. It's almost as if Windows 7 is blocking the device when it cannot find a driver. I tried to disable 'automatically install the drivers', but then the installation of HP does not see the printer when it is plugged.

  Basically I'm going nuts and is getting ready to send this printer to Costco, get a Canon. I know the drivers of Canon works because my neighbor has the same configuration as me and his printer, installed fine. I prefer the HP (well, I did) but tired of beating my head against the wall. Anyone have any ideas?

  Thank you

  . / height

  I figured this out. The USB driver would never install. I beat my head against the wall for days and never thought about it. However, I didn't know that I could install the drivers on my main PC with no wireless connectivity wireless. Has a cable LAN connectivity. Apparently my wireless router is smart enough (like most) to send the print queue through my local network to the wireless printer.

  So I just installed the software wireless on my 64 bit WIndows 7 system and I print just as if I was of my laptops wireless.

  I wanted to just update everyone because it isn't really all that clear that you do know. print even if you are wired to the wireless printer.

  See you soon,.

  Dave

• Require the NDIS2 drivers for HP LAN and USB travel hub

  Hello

  I have some ultrabooks with no LAN on board, which I am trying to use an image Ghost (the network).

  I use a HP LAN and USB hub, but to get the ghost to work, I need drivers BACK (NDIS2) to get this working.  Any ideas where I could get these in.  I had a good glance but had no joy so far.  All of my generic drivers seem to fail too!

  Thanks in advance!

  Hello, I'm not familiar with the "HP LAN and USB travel hub", but I used a good amount of Ghost!

  I think that it can be difficult to get this ethernet device works in DOS mode.  One of the problems is that DOS itself does not have support for the USB, so you would first get drivers in real mode USB installed and then find/layer drivers for HP LAN and USB travel in addition to this hub.

  This looks like a difficult task.  Must the ghost image be stored/retrieved over the network?  It may be easier to use Ghost with a local storage device, for example a USB optical drive or an external/USB drive (if that's an option)...

  Another option would be to use a different disc Imaging program (the one who works within Windows, or something like a Windows PE boot disk uses instead of BACK).

  I hope this helps!

  Dave

• I can't install the driver that came with my TV/FM USB box because it is a 32-bit driver. My OS is Windows 7 64 bit. Please how to install this driver?

  I can't install the driver that came with my TV/FM USB box because it is a 32-bit driver. My OS is Windows 7 64 bit. Please how to install this driver?

  You should go to the 'box' TV manufacturer support website and download and install a 64-bit driver.

  The 32-bit driver will not be installed in a 64-bit system.

  What is the model of TV 'box '?

• HP 14-r053TU: Driver Bluetooth and Wifi driver HP 14-r053TU for Windows 7 (64-bit)

  If please get bluetooth and Wifi driver HP 14-r053TU for Windows 7 (64 bit) operating system. I found the driver in the driver for this device download page.

  Hello

  Please try:

  For the wireless:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_131223_1

  Bluetooth:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_130390_1

  Kind regards.

• where are my drives A: and F: in windows vista?

  where are my drives A: and F: in windows vista?

  A: is reserved for a floppy drive, and made in the last few years most of the computers do not have.

  F: could have been assigned to an external flash drive or a hard drive that is not currently connected to your computer.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  Am having problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  * original title - I'm having a problem *.

  You have the latest drivers?
  http://www.nvidia.com/page/support.html

  Aero - Windows 7 - How to troubleshoot problems with Aero

  (1) first of all, click on the Start button and type in Aero. Now, click on find and fix problems with transparency and other Visual effects of link.

  (2) a new Wizard dialog box opens. Make sure that you click Advanced to solve all problems automatically.

  (3) either the problem will be solved or not. If this isn't the case, you will get a list of items that are potential problems.

  (4) If you want to see more details about the problem, you can click View detailed information. This will give you a list of potential problems that have been verified and those that pose problems.

  If it does not---> click Start---> right click computer---> click Properties

  Click the link for 'Windows performance index' and then click 'rerun the assessment"to refresh your WEI score and try again.

  Note: If you have Windows 7 Starter, or if your system does not meet the requirements for Aero you will not be able to use Aero.

• Driver for G7 - 2251DX running windows 7 64 bit

  I need the driver for the laptop next

  HP Pavilion G7-2251DX

  Install windows 7 64 bit and can not find the driver for the following.

  PCI\VEN_1022 & DEV_780B & SUBSYS_184B103C & REV_14
  PCI\VEN_1022 & DEV_780B & SUBSYS_184B103C
  PCI\VEN_1022 & DEV_780B & CC_0C0500
  PCI\VEN_1022 & DEV_780B & CC_0C05

  Any help will be appreciated.

  Thank you

  Hello:

  Please see my response to your other post on the link below.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/driver-for-G7-2251DX-running-Windows-7-64-bit/m-p/3819706

• Need a driver for keyboard RT2300 for Windows 7 64 bit

  Need a driver for keyboard RT2300 for Windows 7 64 bit

  Hello

  Go here and set for keyboards, 'Wired keyboard 500' and others as needed.

  Microsoft Hardware - Software
  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  Download the file. Browse-click with the button straight on - RUN AS ADMIN.
  (Defined as a 500 keep)

  I hope this helps.

• Want to know if Scanner 32-bit driver may be installed on Windows 7 64-bit operating system.

  Original tile: 32-bit Windows 7 64-bit TWAIN driver

  I just installed Windows 7 64 bit on a new machine. I have an Epson Perfection 3200 scanner but Epson does not deliver a 64-bit TWAIN driver, which is not very friendly to them. I don't want to have to buy Vuescan, just to get a pilot. Can I use 32-bit Epson installation?

  Hello

  Please contact Microsoft Community. I understand that you want to know if you can install the driver for the Scanner 32-bit on 64-bit Windows 7 operating system. I will surely help you this question.

  All devices devices need 64-bit drivers to work on a 64-bit version of Windows. Drivers designed for 32-bit versions of Windows do not work on computers running 64-bit Windows versions.

  See the article for more information.

  32-bit and 64-bit Windows: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows/32-bit-and-64-bit-Windows#1TC=Windows-7

  However, you try to install all available updates Windows including optional updates and see if there is a 64 bit version of scanner drivers are available. If this isn't the case, you will need to purchase VueScan from Hamrick Software as suggested in the Web of Support of Epson site or check with the help of Epson if they have other alternative suggestions.

  Hope this information helps. If you need more assistance or information on this question, reply to this message. I'll be happy to help you.

• Hello.  I just uninstalled LR 4.1 and reinstalled using the disc.  There is a 4.4 update I tried to install, but he failed both times I tried.  Message says 'Fail' but without code, etc.  It's 2016 and I use windows 7 64-bit.  Is there an access

  Hello.  I just uninstalled LR 4.1 and reinstalled using the disc.  There is a 4.4 update I tried to install, but he failed both times I tried.  Message says 'Fail' but without code, etc.  It's 2016 and I use windows 7 64-bit.  Is there access to the 4.1 just uninstall and fresh install 4.4 from the site?  Is the problem 4.1 and 4.4 no longer supported?

  You can download LR 4.4.1 including the latest update here:

  https://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Uninstall the current version of LR, you have it installed, download LR 4.4.1 installer and install it. I don't know what causes your problem with the update, but that a full installer for 4.4.1 can operate without any problems.

• driver lan, ethernet, usb, PCI for HP Pavilion 17-e027sf for windows 7

  Hello

  my colleague by recently an HP Pavilion e027sf 17.

  installed by default with windows8.

  He needs to put seven but when not found the driver for the usb, lan, ethernet, PCI bus, bus SM.

  I ask you to help me if you know where I can found the driver.

  Thanks a lot the veru

  Hello:

  First install the amd chipset driver and restart. You want the first file on the Web page.

  Chipset driver will install the smbus controller.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  Then, install these two drivers for usb 3:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Ethernet:

  Install the second driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Dev PCI:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125075_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  In order to provide the driver for the wireless network card (reproduced by a network controller in Device Manager), I will have you click on and view the ID of the hardware for it.

  Use this guide to find out how to find a hardware ID.

  http://www.WikiHow.com/find-hardware-ID

• Problem install driver Brother MFC 8300 (using Windows Update)

  I need help for my printer to work with a new installation of Windows 7 Home Premium 64-bit.  I had to reinstall due to a CMOS error, I think it was because of a dead battery.  It could even be something else because I had other problems with this facility (explained below).  In any case, the printer is a former Brother MFC 8300 (he was a workaholic!).  Past times, I have re-installed Windows, there have not been any problems with this printer.  I just install Windows Update driver (the driver is named 'Brother MFC8600/9650 Series' in Device Manager).  But this time the installed "Windows Update" the driver and says that everything is working properly but when I go to "Devices and printers" it does not appear in "Printers and faxes" (as he usually does).  FYI, there is a list for "USB Composite Device" in "Devices" that shows "Brother MFC8600/9650 series" as a scanner.  Don't know what that means.

  I also tried to manually download the driver of 'catalog.update.microsoft.com '.  I downloaded 2 different versions of the driver.  It has a size of 2.0 MB file and the other has a 2.3 MB file size.  I found myself by installing do not either because I didn't know where the appropriate destination location has been using the 'Expand' of the 'Command Prompt' command with "expand -F: * " ."  I think that the file for the "Windows Update" file size is 2.1 MB (my memory is not the biggest however).

  I am running as a "Standard user", but I installed all the drivers of devices as an administrator.  I also noticed a problem with an application that I used before this re - install, "Ultracopier.  On installs previous he has installed fine and he demanded 'Administrator' rights after the start.  But during this installation, it did not work at all and did not 'Administrator' rights after the start.  I also had problems with a 2 to external hard drive related to the permissions and access to certain files and folders.  I don't know if any of this matters but I thought that the more information the better.

  I hope someone can help me with this because I really need this printer to work.

  Hello

  Sorry for the late reply.

  I suggest that you restart the Printer Spooler service and see if that fixes the problem.

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  Please follow the steps below:

  You must be logged on as administrator to perform the following steps:

  1. By clicking the Start button, click Control Panel, open administrative tools. In the search box, type Administrative Tools, and then click Administrative Tools.
  2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Right click on the print spooler service, and then click Properties.
  4. Under the tab general , next to Startup type, make sure that Automatic is selected.
  5. If the service is not already running, under Service status, click Startand then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, please see the link below:

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  If you are still facing problems while using the printer, I suggest to uninstall the driver again and install all the optional updates offered by Windows Update and then install the printer drivers if not included in the optional updates and see if the problem persists.

  To install optional updates, follow the steps below:

  1. Press the Windows key + R
  2. Type wuapp
  3. In the left pane, click search for updates, and then wait while Windows searches the latest updates for your computer
  4. If updates are found, click on view available updates.
  5. Select the optional updates, and then click on install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Hope this helps, get back to us if you need further assistance for Windows.

• ProBook4530s HP: HP ProBook 4530 s problems of driver Bluetooth and 'unknown '.

  Hello, this is my first post here, and I hope that you will help me solve my problems.  So I have HP Probook 4530 s (product number: A6G46ES-#AKS) with 64-bit Windows 7 Professional.

  My first problem is bluetooth driver:
  

  

  

  And the second is the unknown driver:

  

  Could you help me please? Thanks in advance!

  I did a right click on the bluetooth problem device, select uninstall, check driver uninstall, reboot and see if reinstalling the driver works.

• Driver HP Business Inkjet 2800 Windows 7 64 bit problem

  Hello

  I've recently updated my PC to windows 7 (64-bit). After that I have a face issue, I don't get running windows 7 64 bit HP Business Inkjet 2800 printer driver. Please help me if anyone with complete operational driver.

  Black only option is off in my printer. I need to activate this option. Please help me anyone know of any solution.

  Hello

  You get the drivers for your printer directly from HP

  Uninstall and reinstall your printer using the right drivers and installation on the HP Web site information.

  And there are some troubleshooting steps for her there too.

  • HP Business Inkjet 2800 printer

  Or you can also ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  @@@@@@@@@@@@@@@@@@@@@@@

  This can also help you:

  "Solve printer problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  "Solve printer problems.

  In the upper right corner, select your operating system from the menu drop-down.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See you soon.