OfficeJet 6500 and USB on Windows 7 64 bit does not (wireless works fine)

Similar Questions

• Windows 7 64 bit does not recognize the external hard drive.

  Windows 7 64 bit does not recognize the external hard drive.  I have an old 250 GB Western Digital external hard drive.  Neither of my windows 7 machines recognize it.  It does not show in the device, Manager of the computer Manager or Explorer.  Any help would be appreciated.  THX Mike

  Hello

  Initially, check if the hard drive is compatible with Windows 7.
  Check out the link - http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx
  See the help article and check if it helps.
  
  My drive does not appear in Windows Explorer
  http://support.Microsoft.com/kb/330140
   
  Tips for solving problems with USB devices (this also applies to windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
   
  It will be useful.

• Connection not lost of Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller no windows 7 64 bit does not fixed the driver version v2.4.7.29_WHQL

  Connection not lost of Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller no windows 7 64 bit does not fixed the driver version v2.4.7.29_WHQL.

  It's sad to see how Samhrutha answer to the question in this way.

  The driver does simply not good.
  The only option to address this situation in the meantime a driver that works, disable features in ' Configure, Advanced tab "on the actual card.
  Different properties exist here. Try to enable / disable some of them. It helped for me on Win7 x 64 ASUS MB.
  Kind regards
  fundutzi

• Problems of driver LAN and USB in Windows 7 / 64-bit

  Product name: HP Pavilion 15-b100sh Sleekbook
  OS: Win 7 64 bit

  I have a problem with my LAN (named Windows: Realtek PCIe FE Family Controller) driver, code 10. It does not, but I have tried many driver but I faild.

  The other thing, the USB ports. (Universal Serial BusController) Three of the four works do not. Code 28.

  I need drivers windows 7, please.

  Thank you.

  Gordy

  Hi, Gordy:

  Try these drivers:

  If you have not already done so and restart first install the chipset driver.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118468_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  USB 3.0:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118604_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Ethernet: You want the second pilot on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• Windows 7 64 bit does not recognize the USB external drive HARD Stor E art 3.5 "

  I buy the art external disk HARD Stor E 3.5 "and spend a few days in windows does not recognize the HARD drive. Try to connect the drive to other USB 2 ports and nothing happens. Use a USB to see if has been a problem with the USB ports, but all 3 are OK. Try it on the laptop Asus and windows 7 recognizes the HARD disk. I formatted the drive in NTFS FS. In managing records do not show the external HARD disk. What can I do to fix this?

  My laptop is a Qosmio F60

  This is a really silly situation. It can be recognized by other laptops but not your Qosmio.
  According to the description of your HARD drive when connected simply doesn t exist for your Qosmio laptop.

  Some other HDD is recognized correctly?
  What you can try is to reinstall the chipset driver, restart the laptop and test it again.

  Since when you have this problem? Some installed updates of the last days?

• Halo 2 for Vista and Windows 7 64-bit: does not. need a solution

  I JUST BOUGHT A NEW HP LAPTOP AND TRIED TO LOAD HALO 2 THAT I BOUGHT TOO RIGHT. IT DOES NOT WORK. WHAT I AM DOING WRONG? I TRIED ALL THE SUGGESTIONS IN OTHER FORUMS. PLEASE HELP ME. Thank you.

  Take a look at these discussions in the forum for Games for Windows.
  http://forums.gamesforwindows.com/t/8958.aspx
  http://forums.gamesforwindows.com/p/8000/74420.aspx#74420
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Officejet Pro 8500 has 910 a, Vista 32-bit, does not connect via the usb port on my PC!

  I used to have it all in one connected to my pc, until I lived some printing problems, so I decided to uninstall it!  When I tried to reinstall, the pc will not connect it.  I tried different ports and have replaced the cable, have also downloaded the latest software and drivers all to nothing does not.  I can connect wireless to my laptop, but unfortunately is not a solution for my office because it is not wireless, so it must be connected via USB.  At my wit's end, please help me!

  Hello

  Can you try to insert a flash drive into one of the USB ports on the printer, to make sure she reads it?

  The printer port may be what gives you the question. In addition, you can try the USB printer connected to another PC?

  Let me know the results.

• Windows 7 32 bit does not start after the installation of the need for assistance

  I have an iMac 21.5 inches (mid-2011) with 8 GB Ram, 2 TB SSHD, new HL-DT-ST DVD - RW GA32N and tried to install windows 7 (32 bit) on using Boot Camp Assistant.

  I already downloaded and copied software 4.0.4033.zip Boot Camp here-> https://support.apple.com/kb/DL1630?locale=en_US for my 16 GB Pen Drive MS-DOS (FAT32)

  The installation was successful, and windows 7 loads just fine 1st time, I created UserID and password, settings etc... using the apple keyboard then installed the drivers from apple on this issue of my 16 GB USB key. Seems my Magic Mouse works but my keyboard is not detected

  Then I tried to restart so the changes would come into force, and since then my Windows will not start or run Windows 7

  Now if I start my iMac hold down the Option key, I get Macintosh HDD, windows, recovery 10.11.4 and DVD. If I select Windows or Windows DVD it starts Booting then black screen followed by this Message on the screen «Press a key to boot from the CD or DVD...» »

  If I press any button it starts booting from DVD and gives me the option to install Windows and if I do not press a button some then nothing happens

  Windows does not start a BootCamp HDD and I'm left with no option but to press on the button / stop to stop iMac.

  Fortunately my El Capitan works well, but my Windows will not start. I tried 2 times install windows 7 32 Bit on my BootCamp HDD.

  So any help, I do not understand what am I'm doing wrong, I would be really grateful if someone who knew bootcamp can guide me so that I can run Windows OSX on my iMac.

  Thanks in advance.

  Remove the DVD, boot in OSX and after the release of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Windows Vista 64-bit does not

  I have a Toshiba laptop with windows vista 64-bit.  I can load up with success to the point where I can go online and run other programs, but after 5 minutes or so everything becomes unresponsive.  The internet browser, the taskbar.  Everything except the mouse and touchpad.  Vista seems to be a bit busier than normal during this time and no matter how long wait he just still insensitive until I restart.  After the reboot, it does the same thing.  Start in safe mode gives no problem.  I would like to find a way to solve this but have no idea where to start.  Any help would be greatly appreciated.

  Hi goonstwone,

  Remember to make changes to the computer before this problem?

  This problem may be caused by some conflict hardware or software of a third party; I suggest you try the following steps to refine the question:

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard, start the computer, and then check to see the problem persists

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: The computer in the boot and a test

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what

• Firefox 36.0.4 windows 7 64 bit does not work

  After updating firefox does not open even if the process is displayed in the Task Manager. On a 64-bit windows computer 7. Tried a few of your suggestions to debug and get working again. I'm not going to do more troubleshooting or work or research on this. It is broken broken broken. I had the latest mobile version running for awhile, but after the last attempt to install the desktop version (after uninstalling, removing x 86 old program shirts, reboot, etc.), the portable version is lance. As I have said that I will not make every effort more on it. I just wanted to inform you Mozilla 36.0.4 it's broken on windows 7 64 bit. This is not how I want to spend my time. Weeks of research No. avail etc etc.

  Tried the mode safe mode with networking. Firefox launched normally. Started in windows 7 normally. Firefox would not launch. (Released in the system tray) with disabilities clamwin antivirus. Firefox launched normally. Alright! Now, I had fireclam value scan downloads in firefox previously. Not sure how that impacts. But I removed fireclam after for good measure. Thank you.

• Windows Vista 64 bit does not install last version of iTunes

  I just updated my iPhone, the recent phone must have the latest version of iTunes installed, I currently have 12.3 but I'm unable to download the latest version, I have Windows Vista 64-bit on my desktop, can anyone help?

  I don't think that Vista will support the latest version of iTunes, which is necessary for the latest version of iOS. I will check something quick and get back to you. What iPhone do you have? What happens when you try to download the latest version?

• Windows 7 64 bit does not properly close the Tecra A11

  Last week my laptop Tecra A11 ceased to close properly. Windows 7 64 bit stops, the screen goes black but the power of the computer turns off is no longer. Power of the computer stops if I hold down the power button.

  I'm running a Toshiba Express Port Replicator to work and a Toshiba Dynadock U at home. The problem occurs on both sites. I have scanned for viruses, update Windows and defragmented computer, but none of these things had no effect on the problem.

  Anyone know how I can fix this frustrating problem?

  The same thing happens when the laptop is not connected to two external devices?
  Have you installed any additional software that may be responsible for this?

  Have you noticed the same problem as the use of the standby or hibernation mode?

• Lenovo OneKey Recovery for Windows 7 64 bit does not work

  Someone at - it a patch or a new release for Lenovo OneKey Recovery link? I recently bought a G450 and Win 7 Ultimate 64 bit separately, there is no link available in the support and download under this model page yet. I tried to install the 64-bit version of Vista and still does not work as well. I did a clean install, downloaded the drivers from Lenovo support page.

  OneKey Recovery 7.0 for Windows 7 32 bit

  OneKey Recovery 7.0 for Windows 7 64 bit

  Take advantage of .

• Update for Windows Vista (32-bit) does not always update

  I saw the many threads on this topic; many recommend that you manually download updates, but none give instructions on how to download manually.

  If I try to download something from Microsoft Websites, I get an error saying that the I do not have a program that will open the download and does not suggest which will download programs or install updates.

  Is there anyone who knows the same question.  I'm at the point where I'm done.  I spent too many unproductive hours on it, and Microsoft does not seem to care enough to post a fix.

  Any help would be appreciated!

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-update/Vista-Windows-Update-does-not-work/8385103e-4117-4b0c-B21F-27a266fdf4a9

• Windows Vista (64-bit) does not start.

  Last night, I installed the new McAfee antivirus due to having a virus that prevented the windows firewall to allow me to surf the net via my router (usually would work when directly connected to the modem). The antivirus has worked very well and I was able to access the internet very well. The rest of the evening consisted of me Star Trek Online patch and play a little of it and there was still no problem. This morning I woke up to find my computer screen in the the Startup Repair stating that it could not load Windows Vista.

  Here are the details given after that Startup Repair ends:

  Problem event name - StartupRepairV2
  Prob GIS 01 - AutoFailover
  Prob GIS 02 - 6.0.6001.18000.6.0.6001.18000
  Prob GIS 03-6
  GIS 04 196611 prob
  Prob GIS 05 - BadPatch
  Prob GIS 06 - BadPatch
  Prob GIS 07-0
  Prob GIS 08-3
  Prob GIS 09 - WrpRepair
  Prob Sig 10-10
  Version of the OS - 6.0.6001.2.1.0.256.1
  -ID of locale 1033

  I tried to go in Mode safe mode (F8) and it still won't start. The Startup Repair cannot repair. Any suggestions?

  Hello

  You can perform a recovery of windows system restore and check.
  Follow the step from the link provided.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  We need the DVD of windows to solve the problem. I suggest you to contact the manufacturer of the computer and get windows vista DVD. If you are able to get the Windows DVD and then, I suggest you to follow the steps in the supplied knowledge base articles and check.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem
  http://support.Microsoft.com/kb/934540

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows
  http://support.Microsoft.com/kb/927392

  If you are not able to get the Windows Vista DVD, I suggest you contact dell and request a recovery DVD

  Contact us
  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1