problems of its hardware is not working properly or is in use elsewhere

Similar Questions

• Problems with my sound doesn't play not even though the settings say that the audio does not work properly

  recently I went on vacation... sound computer works very well before I left. Came back, and now the sound does not work.  I checked all the settings and it says everything is working. I've done some research and there was only one window to come when I rebooted that says a file with the extension dll is not found.  So I restored by computer back to before I left on vacation, but still no sound.  No pop up with the dll is not found though.  I went in the "maintenance" section and found it seems to be a few questions audio below is the scheme which is the filler. Hope this is enough information for assistance.  said the task of event 20 116.  I have an ACER one with windows. the computer has HDMI dolby and realtek.

  -

  -

   

    20

    0

    4

    116

    0

    0 x 800000000000000

   

    3490

   

   

    Microsoft-Windows-Audio/PlaybackManager

    LorrainesPC

   

   

  -

    3

    48000

    fake

   

   

  Judy Hello,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand you have a problem with the sound does not work properly in the computer even if the settings say that the audio does not work properly.

  Certainly, I understand your concern and will try my best to help you.

  I appreciate all your efforts really to try to solve this problem.

  This issue would have intervened if the sound card has went wrong in the computer or audio drivers have been corrupted.

  I would suggest trying the following methods and check if that helps.

  Method 1:

  I suggest you to refer to the procedure described in the article below and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: The above article will help you identify and solve its current problems in Windows, including no sound from your speakers or headphones.

  Also try to install the latest drivers from the chipset in the system and check if it helps.

  If the problem persists, follow method 2

  Method 2:

  How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article explains how to run the tool (SFC.exe) System File Checkerto scan your system files and to repair the missing system or damaged files from Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Satellite Pro C50-A-153 - Touchpad does not work properly

  First, sorry for my bad English.

  I have a Toshiba Satellite Pro C50-A-153, the problem is its touchpad and not work correctly, the mouse does not move when I move the finger on the pad, it seems that if I had to roll the bar "or the mouse wheel.

  Sometimes, the 'mouse' works for 20 seconds and then again the same thing. An external mouse works fine.

  It is not the problem of the functions "Fn". I tried to stop, reset the battery and press the power button to 50seconds. I also tried to uninstall the drivers for the Touchpad, and I think that I tried to change all the properties on the 'Control Panel - mouse'.

  Can someone help me with this?

  Thank you.

  On most computers laptop Toshiba is installed the Synaptics touchpad driver. With this driver, there are available additional touchpad settings. Try it please change these settings and turn off the features you don't need.

  How to do that you can read on https://aps2.toshiba-tro.de/kb0/HTD3101Z30000R01.htm

  Check it out.

• My sistem 5.1 audio does not work properly when I connect to the internet

  Hello!

  I just bought a Genuis 5005 5.1 audio sistem and I have a problem with him: it will not work properly when I get on the internet (the center speaker does not work).

  I also bought an Asus Xonar DG 5.1 soundcard which works perfectly. I installed and also installed the driver for it.

  When I play music/videos to my hard drive, all speakers work fine, but when I enter the internet videos/Music Center speaker does not work...

  I hope someone can tell me how to solve this problem... Thank you

  Later edit: I managed to solve the problem by selecting the "2 channel" option in my sound card driver.

  I managed to make it work with my audio driver 2-channel. Thank you for your time :)

• The drivers for this device are not installed. (Code 28) __This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  I HAV these two errors in my drivers and windows cannot update, can any body healp me?

  Hello

  What devices are - if you can not tell what is the name, then you can specify the category of
  Device Manager - or both?

  --------------------------------------------------------------------------------------------------------------------

  This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  The device doesn't seem to be present. The problem may be a faulty hardware or a new driver might be needed.

  Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

  On theGeneral properties of the device tab, clicktroubleshoot to start the Troubleshooting Wizard.
  ---------------------------------------------------------------------------------------------------------------------
  The drivers for this device are not installed. (Code 28)

  To install the drivers for this device, clickset to update driver, which starts the Hardware Update Wizard.

  ==================================================================

  Those who might be ghosts then right click on them and UNINSTALL - devices and then RESTART.

  References to Vista also apply to Windows 7.
  
  If they show upward then try to manually install the drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I have installed autodesk inventor 9, 2002, and it is not working properly it gives an error that there is a problem of compatiability. Is there something I can do to correct the problem of compatiablity?

  I have installed autodesk inventor 9, 2002, and it is not working properly it gives an error that there is a problem of compatiability.  Is there something I can do to correct the problem of compatiablity?

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• A yellow "!" box-tcp/ip protocol driver - this device is not present, is not working properly or is not all its drivers installed. (Code 24)

  TCP/IP protocol driver problem

  A yellow "!" box-i.m running windows xp professional, tcp/ip protocol driver service pack3(32bit), when i open hidden under drivers not Plug-and-Play, on the general tab of properties I receive, this device is not present, is not working properly, or does not have all its drivers installed. (Code 24) when I hit the Start button I get, (the system encountered the following error trying to start the service) "the specified driver is invalid" this error prevents me access to internet please help, unfortunately I n, have a cd of xp pro.installation. but I have a dell xp home edition reinstallation cd, any help would be appreciated.

  Imran, sorry for not having a back earlier, thanks for your reply, I got an installation cd and a clean installed which sort the problem.

  Kind regards

  dermotk

• Bytemobile kernal Network Provider this device is not present, does not work properly or does not have all its drivers installed. (Code 24) What should I do?

  Kernal Bytemobile network provider: this device is not present, is not working properly or is not all its drivers installed. (Code 24). What should I do about it?

  Hi Arthur,.

   
  You have made any changes to your computer recently?
   
   
  I suggest you to follow the steps and check if it helps.
   
  Method 1: Make a convenience store and check if it helps.
  Open the hardware and devices Troubleshooter
   
   
  Method 2: Updated check and network provider kernal Bytemobile if device driver that can help.
  Updated a hardware driver that is not working properly
   
   
  Method 3: You can check out the link and check if it helps.
  Explanation of error codes generated by Device Manager in Windows XP Professional
   
   
   

  Note: This link applies to Windows 7.

• Button hardware on Samsung slate Windows 7 does not work properly in Windows 8

  After you install the official update of Windows 8, the hardware button windows does not work properly. button lock display as well.

  Whenever I restart the system, everything works fine, until you put the sreen of. If you re-enable the slate (just energy), the buttons Don t work.
  Thus, windows hardware button offers just a double click to change the windows, but doesn´t take you of the subway home and the screen lock work doesn´t button at all.
  Someone at - it a solution for this problem? Would be nice, because I think that all the samsung slate 7 users have this problem.

  Hello. I don't know if you have this problem, but as long as no one have answered your question.

  I had exactly the same problem and after following the advice of the official windows samsung 8 upgrade support the Tablet worked perfectly.
  Just follow this link (http://www.samsung.com/us/support/win8upgrade/) and download the software to the 3rd market. It will install a lot of software and hardware upgrade for your Tablet and if it doesn't work as well for me it will solve all your problems.

• Windows xp reportsThis device is not present, does not work properly or does not have all its drivers installed. (Code 24)

  in the device under the non-plug-and-play drivers Manager... it has a yellow question mark next to this "MpKslb71170d2" I have no idea what it is.

  the error code is 24 and is shown below

  Windows xp reports "this device is not present, is not working properly or is not all its drivers installed." (Code 24) »

  the choice, it gives me is to disable or uninstall... What is this error, what device, what should I do?

  Same computer as in this other thread of yours? -Online http://answers.microsoft.com/en-us/protect/forum/protect_updating/the-red-shield-is-on-my-microsoft-security/9243c546-aa6d-46cc-8780-2ac040a52e35

• This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  Original title: Non-connectable & play drivers

  While looking through my device manager I found 4 of the Non-fiche & play drivers (hidden) with them in exclamation points:

  : Cherimoya

  : innfd_1_10_0_13

  : Iwnfd_1_10_0_13

  : MpKslefd0a58c

  I have no idea what these are, for only they do not work, the about property box: this device is not present, is not working properly or is not all its drivers installed. (Code 24)

  I checked with the driver for each page, and the following line appears for all: "the system has encountered the following error while trying to start the service.

  "The system cannot find the file specified."

  I leave principle that Win 7 needs them to work so any help there would be great, thanks in advance.

  Here's the likely remnants of malware infections that your anti-malware software has partially withdrawn.  See, for example:

  http://www.bleepingcomputer.com/startups/Cherimoya.sys-28755.html

  http://www.herdprotect.com/innfd_1_10_0_13.sys-3e2e078dc9ae42e6223468777ca67d6931a70904.aspx

  I suggest that you uninstall all of these elements, then

  1. Use the Virus Scan free online ESET--> http://www.eset.com/us/online-scanner/
  2. Download, install, update and run the free version of MalwareBytes AntiMalware--> https://www.malwarebytes.org/ you don't need for the Pro version, even if there is a free trial of this one.  During the installation of any software downloaded, be careful when installing and uncheck all the options selected by installing other applications.

• Problem with Windows Media Player: "Server execution failed" and "files needed to display video are not installed or do not work properly.

  I have a problem with Windows Media Player on laptop Lenovo G780. My laptop is under warranty (bought a month ago), but technical support Lenovo told me that the Windows Media Player program is not covered by the warranty.

  And this is a problem:

  When I click on Windows Media Player - to about 0.1 sec I see it opens and closes the window and nothing happens.

  When I select a mp3 or wmv file and right-click with the option open with Windows Media Player - I get a message: "Server execution failed" - I checked that all services with 'Media' in the name are running.

  When I select a mp3 or wmv file and right-click with the open option with Windows Media Center - Windows Media Center opens with the message: "the files needed to display video are not installed or do not work properly.

  When I select a file mp3 or wmv and right-click with option open with Windows Movie Maker life - see the video

  I tried to turn / WMP and WMC - did not help
  Tried to run as administrator - did not help
  I don't see something suspicious under events

  What can I do else?

  Thank you

  Zarek

  I had the same problem and then by chance, I tried a video on YouTube and it worked for me. Here's how I went on this issue and solved my problem:

  1. go to the computer, then OS (C).
  2. you will need to open Program Files (x 86) and Program Files.
  3. go to Windows Media Player in Program Files (x 86) and open the folder.  Then, remove the wmplayer file.  You may need to work around the error TrustedInstaller.  I'll tell you that, in a moment.
  4. in Program Files, go to the same folder for Windows Media Player and select the same file again. Wmplayer.  Copy the file in another window open.  Copy ensures that if the question comes up again you can at least try to fix it again.
  This should be the end of your problem.  If you need to circumvent the TrustedInstaller question is how:
  1. right click on wmplayer and select Properties > Security > advanced > owner > Edit > other users and groups.
  2. Enter your username and then click on check names.  Click OK.
  3. close the dialog boxes as he has requested.
  4. open again the properties and click Security.  Select your username from the list and click on edit.  From there, select full control.
  This should give you full control over the removal of the original file for WMP and easily allow you to copy the other files (x 86) programs.
  Please let me know how it goes for your problem.

• HP windows vista laptop webcam does not work properly please help?

  HP pavilion dv6707us webcam does not work and its not detected in everything that I use it in please someone help me ive been looking around and it was working fine until I did the updates of windows please, it's a hp laptop windows vista 64 bit?

  Hi JohnnBoyyy,

  1. you receive messages or error codes?

  Given that the problem started after installing the windows updates, you can check the updates of windows for optional updates for the webcam.

  For more information, see the article:

  Install Windows updates

  You can also check the HP website and try to update the latest version of the drivers for the webcam and check.

  Software downloads & Driver - HP Pavilion dv6707us laptop

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• USB drivers do not work properly.

  I have a netbook Vaio (name of the VPCM13M1E model) and USB drives will not work correctly. I ran a microsoft fix (hardware and devices one by one). The results said:

  -universal host controller USB Intel (r) 82801g (ICH7 family) - 27 8 does not work properly, and it has not been fixed.
  -Intel (r) 82801g (ICH7 family) USB2 enhanced host controller-27CC does not work correctly, and it has not been fixed.
  -Hardware changes may not be detected.
  Its very annoying because I cannot plug anything on the USB.
  Help, please.
  Camille

  There was a lot of mistakes in the case where the display indicating a gel delivers that seems to have started in early April.

  These gels seem to be preceded by the following error (Source - core-EventTracing):

  Session "Microsoft Security customer OOBE" stopped because of the following error: 0xC000000D

  This error can be caused by a corrupted EppOobe.etl.

  You may be able to resolve the freeze by recreating the EppOobe.etl.

  First of all, can you do the following:

  Start > type options files in the "search programs and files ' and press 'Enter' keyboard > view > then under" Hidden files and folder "select"Show hidden files and folders and drives"> OK

  Then go to the following folder:

  C:\ProgramData\Microsoft\Microsoft Security Client\Support

  In this folder click EppOobe.etl , and then rename the file in EppOobe.bak

  Restart the computer and let Windows recreate the EppOobe.etl.

  I hope that will stop the freezing issue.

  If the problem persists with USB you can restart the computer using safe mode and see if the problem exists in Mode without failure.

• My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.

  Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.