problems of migration between 4.0 and 4.1 and vpshere different server platforms

Similar Questions

• Printing problems home network between Windows XP and Windows 7 PC base

  I've seen a number of comments about problems between Windows 7 and Windows XP computers print domestic network.  In my case, I have a new Windows 7 Desktop connected to my printers and wireless modem and I use several portable Windows XP in the House that I am trying to reconfigure to wireless network printing.  My old desktop running Windows XP and I had this printer sharing wireless works fine.  I can't get the right of sharing the printer with Windows 7.

  Can anyone help?

  Roger Phillips

  This sounds like the correct driver and is supposed to be OK for the network or directly connect according to the HP website.  There could be something in the fine print of the following HP support document that will help you: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02171232&lang=en&cc=us&taskId=101&contentType=SupportFAQ&prodSeriesId=1845551&prodTypeId=18972 otherwise, the guided "Troubleshooting," "automatic Driver Verifier", or links to "Resources for collaboration" in what follows may help: http://h20000.www2.hp.com/bizsupport/TechSupport/SupportResources.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=1845551

• Problems sending data between the computer and the emulator.

  I can't send anything to the Calculator Emulator. Does not appear in the Send button calculator. In the emulator, it seems that send key as soon as I connect with the calculator and can send data to it. There is command of testicles that EU can do to make sure that a machine works, for example, the USB driver?

  In fact, including updates, firmware:

  application version: 20140702v6031

  operating system version: V 0.032.6030

  version of the program: 201472 (6031)

  most: the calculator, I received yesterday, day 1. and I doesn't seem to work well. There is a channel for guaranteed support, you can contact?

  Recognizing

  Davi

  Friends:

  Thank you very much. The problem has been resolved. As soon as I saw the kit, 3 updates were made and the machine works normally.

  Thank you

  Davi

• problems of communication between the computer and printer (wireless)

  I installed a wireless printer and its not connect with my laptop

  each model is different.  You will need to read the manual on this.  Most likely the IP address assigned to the printer is no longer valid in your current setup.

  from a command like use ping to see if the network route works

  Ping 1.1.1.1 (change the config page IP address 1.1.1.1).

  If you have configured the IP address as static you return to DHCP on the network.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Connectivity problem between Windows 7 and Windows 2008 Server R2

  I'm unable to ping Server Windows 2008 R2 on windows 7. some time get the replay, but some time is expired. I can ping the XP system and windows 2003 and router and switch. knowledge on all new patches or something is blocking the connection.

  I turned off firewall and Antivirus in both systems, off IPV6 in the two systems, but it's no go.

  Hello

  That your computer is under domain, you must contact the TechNet forum, where we have of the support technicians who are well equipped with the knowledge on the issues of domain, do visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• I have a Palm Z22. It won't hotsync. It tries to connect, but then "problem, the connection between your device and the desktop could not be established. Please check your configuration and try again. »

  null

  Chillie wrote:
  Sorry I put my question in the wrong place.  I use Windows XP.  My Palm is a Z22.  I restarted my computer, if that's what you mean by a soft reset.  I have no answers-don't know my hot Sync Manager.

  A soft reset is performed on your computer Z22.  Look for the small "Reset" button on the back of the unit and press it with the tip of your pen or a paperclip.

  Reset draw your Palm.  Try to HotSync again.

  HotSync Manager is what your computer to connect to the computer Z22.  Do you see the HotSync icon in the lower tool bar?  If this isn't the case, you can not connect.  Go here:

  Start Manager button / all programs/Palm/HotSync.  This selection must load the HotSync Manager.

  I would help you with HotSync Manager, but you neglected to answer my question on "What version of Palm Desktop?"

  WyreNut

• Invite reports Migration between 9.2 and 11.1.1.3 error?

  Hello
  
  I am trying to use the migration tool that comes in x 11 to migrate my reports of 9.2.
  
  When I give the details of the sql server database, it gives me the following error message
  --------------------------
  Failed to get tables from sources with the login credentials provided, see the log for more details
  ------------------------------
  When I see the log message if poster, I do not see these tables anywhere in the databases, but it's the definition, I used to create reports.
  ----------------
  [10 06 11:33:08, 139] [INFO] Connection to the report repository database® Hyperion...
  [10 06 11:33:08, 139] [INFO] DriverName: hyperion.jdbc.sqlserver.SQLServerDriver
  [10 06 11:33:08, 139] [INFO] DBUrl: jdbc:hyperion:SQLSERVER://hyp-essbase:1433; DatabaseName = Plan2; SelectMethod = cursor;
  [10 06 11:33:08, 139] [INFO] Username: hypadmin
  [10 06 11:33:08, 139] [INFO] Password: NOT CONNECTED
  [10 06 11:33:08, 139] [INFO] The product name of database: Microsoft SQL Server
  [10 06 11:33:08, 139] [INFO] Product database version: Microsoft SQL Server 2000-8.00.760 (Intel X 86)
  December 17, 2002 14:22:05
  Copyright (c) 1988-2003 Microsoft Corporation
  Standard edition on Windows NT 5.2 (Build 3790: Service Pack 1)
  
  [10 06 11:33:08, 154] [INFO] Driver name: SQLServer
  [10 06 11:33:08, 154] [INFO] Driver version: 3.70.42 (029621.012907.017420)
  [10 06 11:33:08, 154] [INFO] Structure of the test database.
  [10 06 11:33:08, 154] [ERROR] Necessary table 'HSCONFIG' does not exist.
  [10 06 11:33:08, 154] [ERROR] Necessary table 'HSDSACL' does not exist.
  [10 06 11:33:08, 154] [ERROR] Necessary table 'HSDSATTRIBUTES' does not exist.
  [10 06 11:33:08, 154] [ERROR] Necessary table 'HSDSBLOBS' does not exist.
  [10 06 11:33:08, 154] [ERROR] Necessary table 'HSDSDBCONFIG' does not exist.
  [10 06 11:33:08, 154] [ERROR] Necessary table 'HSDSENTRIES' does not exist.
  [10 06 11:33:08, 154] [ERROR] Necessary table 'HSDSRELATIONS' does not exist.
  [10 06 11:33:08, 170] [ERROR] Necessary table 'HSGROUPS' does not exist.
  [10 06 11:33:08, 170] [ERROR] Necessary table 'HSGROUP_MAP' does not exist.
  [10 06 11:33:08, 170] [ERROR] Necessary table 'HSPRIVILEGES' does not exist.
  [10 06 11:33:08, 170] [ERROR] Necessary table 'HSPRIVILEGE_MAP' does not exist.
  [10 06 11:33:08, 170] [ERROR] Necessary table 'HSPROPERTIES' does not exist.
  [10 06 11:33:08, 170] [ERROR] Necessary table 'HSPROPERTY_TYPES' does not exist.
  [10 06 11:33:08, 170] [ERROR] Necessary table 'HSPROPERTY_VALUES' does not exist.
  [10 06 11:33:08, 170] [ERROR] Necessary table 'HSREMUSERS' does not exist.
  [10 06 11:33:08, 170] [ERROR] Necessary table 'HSROLES' does not exist.
  [10 06 11:33:08, 185] [ERROR] Necessary table 'HSROLE_MAP' does not exist.
  [10 06 11:33:08, 185] [ERROR] Necessary table 'HSSEQUENCES' does not exist.
  
  
  Can someone help me please, I need migate these reports quickly.
  
  Thank you
  Vince
  
  Published by: Vince456 on October 6, 2009 12:11

  Hello

  That is, it should be under file > import while in Solution Explorer in the workspace.

  Or read here > http://download.oracle.com/docs/cd/E12825_01/epm.111/bpmui_user/import_fr.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to create the database link between the production and the test server

  You will need to create a link between Test and prod DB access. We need only select access from user@prod to user1@test.
  
  Could someone please answer for example?
  
  
  
  
  Thank you
  sRII

  You will need to create a link between Test and prod DB access. We need only select access from user@prod to user1@test.

  Could someone please answer for example?

  If test for prod

  create public database link to_prod connect to the user identified by password using 'to_prod ';

  Check that to_prod is directed to your production database.

• Different plan back color between the composition and rendering after adobe media encoder

  I discovered after effect...

  I have a problem of correspondence between the composition and the final rendering through adobe media encoder

  The color of the background composition of Loire (regardless of color) and always a background BLACK after the adobe media encoder

  

  Despite several manipulations by changing the settings I can't solve the problem.

  A little help would be welcome, thanks

  The composition background color will never surrender.  Hug composition background color will never, not even with the record locator.  The background is transparent and will always be unless you fill it with pixels. Unless you choose a format that supports Alpha channels, Alpha channels will make always black. Media players will always play a movie with a black background with alpha channel. If you want a yellow background, you will need a solid yellow or yellow shape on the bottom of your model layer.

• Difference b/w University Complutense of MADRID and webcenter Content Server

  Hello
  
  I'm using the Web Center portal and you want to use UCM and not the file system. So I can configure and connect to AAU without installing WebCenter Content server. Please let me know the difference between the AAU and WebCenetr content server.
  Is it all separately integrated with WebCenter portal content management server or in any case, we will have to use WebCenetr Content Server only?
  
  
  Concerning
  -Arvind

  Hello.

  WebCenter content and AAU are the same product (only has been renamed).
  Stellent-> UCM-> content WebCenter

  Kind regards.

• CF8 Enterprise and MS SQL Server

  I need to transfer a CF8 Enterprise application off the coast of a MS Access database to a MS SQL Server existing database/environment (I guess I'm technically Piggy-Back my database in an 'existing' instance). I created my database of SQL Server, responsible for access to the elders of the base and is now looking to connect to CF administrator.
  I get the "java.sql.SQLException: [Macromedia] [SQLServer JDBC Driver] [SQLServer] Login failed for user (null)". Reason: not associated with a trusted SQL Server connection. "error. I've filled in the id and password, which causes this error. I checked, and the properties of the server (using SQL Server Enterprise Manager) and the validiated defined for authentication (SQL Server and Windows) mixed mode, but don't can't get further.
  Any ideas?

  I was able to verify that SQL Server has been using authentication in mixed mode (both Windows and SQL Server), and that TCP/IP is enabled and using port 1433.
  I had to create an ID local within SQL Server and then used this combination ID / password in the configuration of the data source in the CF administrator And then Bingo, that worked.
  Thanks for all you suggestions and patience. Oh, and I also bought a book from SQL Server 2000 to help me get through the code changes required between MS Access and MS SQL Server.

• HP Color LaserJet MFP M177 Pro: Problems of analysis between iMac and HP Color LaserJet Pro M177fw MFP

  Hello

  I had no wifi problems between my Imac and HP Color LaserJet M177fw MFP Pro to scan until recently - it can be related to operating system update to OSX 10.11.4 which was done yesterday however.

  I can scan is no longer docyuments from the top of the charger page - scan starts but just hangs and then I can not re - activate the scan function until I have to force it to quit.

  Can you suggest appropriate corrective measures to try please?

  Thank you very much.

  Hello

  Make sure you have the latest drivers installed:

  In the Apple menu, click about this Mac, and then software update.

  Click on the main menu store reload the Page, and then select allow for the update check completed and install any publicly traded Apple / HP update.

  Then install problems with the products HP LaserJet on OS X El Capitan of scanning HP Software Update to address documents (ADF) automatic feeder:

  http://FTP.HP.com/pub/softlib/software12/OSX/HP_Easy_Start/Essentials/S/HP-printer-Essentials-S-4_5_0.pkg

  Kind regards

  Shlomi

• Problem to create the Internet connection sharing between Windows XP and Windows Vista.

  Original title: Internet connection sharing between Windows XP and Windows Vista.

  Hello

  Recently, I plugged a laptop running Windows XP to a desktop computer running Windows Vista using a standard Ethernet cable with the intention of use sharing of Internet connection. The notebook contains a wireless connection that I've routed to the office via the cable said.  While the initial phase of installation went well (I was too lazy to do it manually, so I just used the Wizard "Set up a home or small business network" Windows XP,) I had to turn off the host computer to install a program. When I tried to set up ICS again, I couldn't connect to the Internet by using ICS. After this failure, I tried to configure the properties of TC/IPv4 (IP, gateway by default, etc.) manually, but I still couldn't run.  I am able to access the shared host PC and client files. It seems to me that some service essential to the proper functioning of the ICS may be disabled in some way, but it's just speculation, as I have no evidence of such a service. Help would be most appreciated.

  Thank you

  FG-man

  I tried this before using a laptop to share internet with my 360.  problem is there was Nat on the router, and it is in contradiction with the ics.

  Anyway long story short I did some research on the Internet and discovered that if you're behind a router ICS will be confllict with her, as ICS also does routing. a much better option is to "bridge the conections ' on the laptop.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_bridge_install.mspx?mfr=true

  If you go this route, you need to set a static ip address for the office,

  Either that or if you want to continue using ICS put the laptop in the DMZ in the router may help, but it will be less secure.

  Hope that this helped good luck

• Printing problem with OE - 6 format since the upgrade to IE - 8: no space between the body and the subject line text.

  My computer is configured with XP SP3 and IE - 8. I've been using Outlook Express 6.0 (update of MS according to needs). Messages are always printed correctly. Lately, however, the body of the message printed directly below the object without line - the space between them. This happens on my Brother laser printer and my HP inkjet printer. I have not changed my settings of the printer. I've recently updated to IE - 7 to IE - 8; However, I see nothing in the settings of IE - 8 to explain this change in print. I recently installed "MobileMe" Panel Apple configuration, which has installed a separate set of folders in the list of folders in OE - 6. I did a clean (with Revo Uninstaller) uninstalling the MobileMe Control Panel, removed the extra e-mail account/folders and rebooted. Yet the printing problem.

  How to restore the space of line between the subject and the message body?

  Hello

  1. How is like print preview?
  2. don't you make changes to the footer settings?

  Method 1.
  If that doesn't help you can not save the file wmp.dll
  a. log on as an administrator.
  b. Click Start, type cmd.exe in the Run dialog box right click on cmd.exe, click Run as administrator and then click on continue.
  c. at the command prompt, type regsvr32 oled32.dll and press enter and then click OK.

  Method 2.
  If this problem started occurring recently, you can restore the computer to a previous state. You lose Internet Explorer 8 and return to Internet Explorer 7. In this way, we can check whether or not the root cause of the problem is installation of Internet Explorer 8.
  Reference:
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problems of synchronization between a mobile device and Windows Mail

  I use Windows Mail 6.0.6000.16386 version (vista_rtm.061101 - 2205) on my Vista machine.

  T1) when I synchronize my contact numbers of my mobile (Nokia) to my Windows Mail Contacts using the supplied software (Nokia PC suite), I find that if a certain person/entity contact stored in mobile, to say Mr. X or Company Y, 4 phone numbers, only 1 or 2 of them get copied into the Windows Mail contacts folder other numbers not copied anywhere. What is the reason for this, and how can it be rectified it IE. all the associated with a given contact phone numbers must be copied across everything by synchronizing?

  Q2) I have 2 mobile, each for himself, and wife. Each mobile has its own set of contacts. During synchronization with Windows Mail, I found that all the contacts from mobile 2 copied in a single database of Contacts in Windows Mail and vice versa so in each mobile. So my contacts appear in the motive of my wife, as well as its own contacts, contacts appear in my mobile, as well as mine.  Is it possible in Windows Mail by which we create separate databases for each set of contacts in the mobile phone, so that when you run a synchronization between my phone and Windows Mail, only my contacts updated in 'ma' database and in my phone, then when the mobile synchronization of my wife with Windows Mail and only its contacts updated in 'his' database and his mobile phone.

  Thank you very much!

  Hello

  I think many other users of Nokia's reported problems with this PC Suite software. I suggest you look on the Nokia forums for support with this specific software, as it is a question of Nokia PC Suite and not a Windows Mail or Windows issue.

  As for your second question, you need to create a second account using Windows Mail and helps to keep the boxes to the letters and separate records:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/how-do-i-create-separate-inboxes-in-Windows-Mail/c5a458af-7d8b-4def-a3f5-bd425a2c519e

  What happened to e-mail identities?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-e-mail-identities