7223cl Pavilion Notebook DV7: BIG PROBLEM! Networking and Ethernet drivers missing!

Similar Questions

• c2n25ua #aba: network and Ethernet Controller

  I lowered from 8 to windows 7 and need a controller network and ethernet for a #aba c2n25ua

  Hi @Ramey4132

  I think you need this card wireless driver...

  This package contains the installation package driver for wireless LAN Qualcomm Atheros AR9000 controller series in the laptop models running a supported operating system.

  File name: sp63802.exe

  You need this ethernet driver...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp56680.exe

• Satellite 1900-101 - video and ethernet drivers

  Toshiba Satellite 1900 101 video and ethernet drivers
  Please give me this drivers on email.

  Hey, Hey you want someone else to do your work. ;)

  You can find one. Go to Toshiba support under http://eu.computers.toshiba-europe.com page > support & downloads
  When you open the drivers under type of product download page, choose the option ARCHIVE and you'll find everything you want.

  Good bye

• HP Pavilion Notebook N9R33EA # a: problems with the BIOS update (HP Support Assistant)

  I was offered an update of software SP77359, which seems to me to be an update of the BIOS provided by HP Support Assistant. Version F.82Ap1. Two days ago, I updated the BIOS via the support and, on the report wizard got an other update via the support Wizard. I applied this patch to find that it was still an other BIOS update and now, which has been applied this third update has appeared. Please let know us how I do.
  
  The model number of my machine is actually N9R33EA #ABU (as reported by the Assistant to support) but ths was too long to type in the name of the product.

  Your laptop is a HP Pavilion Notebook - 15-ab208na (ENERGY STAR) for later use.

  I wouldn't update. Simply click the X to remove the download and install the list in the help Wizard.

  The current version on your laptop support portal is F.8.1

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-notebook-PC-series/8499306/model/8942501

• Problem network and restore do not work.

  I have a computer that I used throughout the past two years.  I have programs on it to keep and I also have pictures and emails, I don't want to lose.  I don't know it's a software problem, I know because I bought another hard drive identical to the one I had installed inside and reloaded windows Xp and drivers everything works fine. I noticed that the last night, I used this PC when I went to turn off windows indicates there is a notification of update, I went ahead and let him do his thing the next day is when the problem manifested itself to the power upward.  I tried to immediately restore no good just stop. The next thing I noticed is that there no Favorites showing network, my ethernet went, my card controller spent, wireless no internet connectivity at all.  My question is - what the machine starts fine and a files seem normal y at - it an easy solution for this without completely formatting and reloading windows so I won't lose my programs I do not have access to the original disks to recharge?

  Hello

   
  1. What are the updates that have been installed recently?  Provide us with the number of these updates?
  2. What is the brand and model of the computer?
  3. you receive an error running the system restore?
   
   
  Method 1:  Try to perform a restore of the system into safe mode with command prompt.
  How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP
  http://support.Microsoft.com/kb/304449
  
  If this does not help, you can consult this article to troubleshoot the System Restore tool.
  http://support.Microsoft.com/kb/302796
   
  
   
  Method 2: Wi - Fi and in Windows network connection issues
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03
   

• Lenovo G510 problem wifi and ethernet

  Hello!

  I have two Lenovo laptops, G50 and G510. The first works perfectly except the second after 10 months started yesterday which have problems with the network adapter.

  The Wi - fi button is grayed out and cannot be opened and the ethernet port can not read any cable. I tried all the solutions I found on the web (deactivation and activation devices, uninstalling and reinstalling the drivers, updating the system and the system format) but failed. The ethernet adapter does not appear in network devices after the restoration of the system to its point original (format), even after installing the drivers for the network card I found in Lenovo support site. And all this happened yesterday when the only change in the system was a windows update. However if this was the problem of the restoration of the system, update and format should have fixed the issue.

  I used windows 8.1 but now after the format I use 64-bit windows 8. Could you give advice? Could this be a hardware problem? I'm desperate here.

  Really weird that both had fault at the same time. Try the following out the battery and the power source and press the power button without any power supply 5 times. And restart again.

  If not try to work the boot in safe mode with network and see what is happening here. In the login screen hold down SHIFT key and choose reboot option. you will see Win8 advanced options.

• Network and volume icons missing in the taskbar.

  Hi here is my problem

  about a week or two ago my volume icon disappeared from my taskbar. I went into the properties of the taskbar and volume has been disabled (shaded on) now in the last week the same thing happened to my network icon. Help, please

  Hello

  1 Please reboot nothing so interfere with this process.

  Click with the right button on Taskbar - Properties - tab Notification area - check box Volume - if it is grayed out
  Then, use this link. (Ditto for power, network and the clock.)

  How to enable or disable the system tray in Vista icons (there are several methods
  and you can to use them all).
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  If necessary: a Mr Fixit

  System icons do not appear in the notification area in Windows Vista or in Windows 7 until you
  Restart the computer
  http://support.Microsoft.com/default.aspx/KB/945011

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• video and game drivers missing in my system device manager

  Hello, I have a computer laptop sony vaio with operating system Windows Vista home premium original on it. The problem I m dealing with, it is that my video drivers and game are missing. When I go to System-Device Manager and expand the sounds, video and game controllers the only thing that appears is the audio drivers, the other two Don t. How can I fix this, or, if West no physical solution, where can I re - download missing drivers?
  system model: VGNCR - 520 d, OS: windows vista Home premium 6.0, version of DirectX: 11.0, processor Intel core 2 duo processor T8100 2.10 GHz, 3 G of ram memory.
  Thanks since now, Anne.

  Hello

  you get your latest drivers direct sony vista

  go to the link below and key in your model number etc.

  http://eSupport.Sony.com/

  hope that works it for you

• HP Pavilion Notebook 15-p004nx: problem in the camera into my laptop

  day support:

  I have problem in this laptop:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-P000-notebook-PC-series/6936226/model...

  My laptop was have windwos 8 instilled on it then I want windwos 7 and all work well only the camera did not work well... I have download the drivers from the above link but I do not see any driver on the camera just this one:

  "Cyberlink YouCam software."

  I know this is the program I download and it gives me this error:

  http://i.imgur.com/YBKrHkj.PNG

  My camera driver:

  http://i.imgur.com/o4aSx5E.PNG

  Control Panel features:

  http://i.imgur.com/j1gQqOe.PNG

  help me and thanks a lot.

  Hello @TheWolfYo,

  Thanks for the quick response!

  If you have exhausted all the solutions mentioned above, then you can consider contacting the HP support by phone for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

  Kind regards!

• Problem WIFI network and update drivers for Qosmio X 500-12 L

  It's the X 500 wireless network.

  The drivers of these no longer up-to-date. The windows update Web site you will get 2,015 and on realtek you can find the update:

  worm 2017.2 date 10/13/2010

  Now, I tried those and they are fine, that only my problem is not getting solved... it seems that the UPPER BAND is not captured by Toshiba. I can connect to a 2.4 ghz without problem on the N range, but trying to find again a 5 GHz connection is a NO GO? bug?

  I have a sony vaio here too, wich perfectly detects it and connects to it fine (N range) so I think that there is a bug somewhere in the configuration of Toshiba.

  All suggestions, help welcome.

  Concerning

  Hello

  Speaking about 5 Ghz WLan do you mean 802.11 N standard?

  The frequency of 5 GHz is supported by IEEE 802.11 WLan standard A
  The standard 802.11 B and G work at 2, 4 GHz
  The standard 802.11 N runs at 2.4 2,4835 GHz and 5.15 GHz 5 725
  So you can use 802.11 N, as a 2, 4 GHz

  You can change additional settings in Device Manager-> card Wlan-> properties-> Advanced tab.
  I also recommend disable WLan Card to save energy.
  You can do it in the Windows 7 power management as well.

• HP Pavilion Notebook-15-p108tx: problem connecting with specific programs

  Hi, I had problems connecting with specific programs recently. I'm still able to communicate online through web browsers. Mozilla Firefox works fine, but Google Chrome still has some problems loading of specific pages or they don't load at all. The main programs I am having difficulties with are mainly games platform programs like Steam, Battle.net, and League of Legends, and I'm unable to go online or to connect to their servers.

  I never had no problem connecting like these last two years that I've owned my laptop, until recently. I think it was the 6th or 7th of may these problems started.

  I updated my drivers and was constantly check to download the most recent. I don't know if it's my internet provider, but I was also constantly check the State of the network to ensure that the services are very good.

  If anyone else has this problem and if there are any suggestions that you think could help solve this problem, it would be appreciated.

  Thank you

  Jasper

  Hi Jasper,.

  Thank you for the update. I think that your computer have a rootkit infection. Most of them were inside of the Chrome Extensions.

  Here's what you need to do.

  Open chrome

  Click on the Menu bar in the upper right

  Click more tools

  Click Extensions

  Please search for suspicious extensions that does not belong to the computer, especially ads. Once you identified, simply click the trash can icon then Chrome close then reopen it again to see if you can connect to your desired game. If this isn't the case, then proceed as follows.

  Manual removal of suspicious files (if you are uncomfortable with it. If this is not the case, then run System Restore from safe mode with command prompt)

  Manual removal (I miss the old days of MS virus removal )

  Go to RUN type %temp% , and then delete all folders by pressing SHIFT + DELETE

  Go to Control Panel and then locate all the apps that you think a form of ads

  Go to safe mode with network. Run Malwarebytes in that State

  Then run Tweaking tool to fix everything that has changed since your computer

  http://www.Tweaking.com/files/setups/Tweaking.com_windows_repair_aio_setup.exe

  If your not comfortable with the troubleshooting steps may perform the system restore on the day, it was working fine.

• HP Pavilion 500-314: big problems by adding an external video card

  You are looking for assistance.

  I recently bought a HP Pavilion 500-314.  Specifications are the following:

  http://support.HP.com/us-en/document/c04293928

  The unit includes the integrated graphics card Radeon R7 and comes with a 300w power supply

  I bought this unit in large part because it states explicitly that "supports PCI Express x 16 graphics cards".  I run a quad-monitor configuration for my work and traditionally did it this using a card ATI over-pants 2450.

  I tried now three different external graphics cards and can get any of them to work:

  First attempt was with a VisionTec Radeon HD 5570 (point #900345).  This card supports quad-monitor configuration and requires a minimum power of 250w.  When I installed the card, the HP Pavilion beeps several times a series of 4 or 5 (can't remember which) emits a beep, but refused to send an image to a video output (either on board or the new card).

  Next attempt was with an EVGA GeForce GT 610.  It's a Setup dual monitor and requires a minimum 300w power supply.  Got the same exact response as with the VisionTec (i.e. the series of beeps... computer would not start all monitors).

  So both of these cards (new), I basically gave up immediately that I couldn't in the BIOS (b/c wouldn't monitors) to see what was going on.  My understanding is that the series of 4-5 beeps usually means that there is a problem of graphics card, or the card that was added doesn't have enough power.  It's frustrating, because the HP Pavilion 500-314 a supposedly a 300w power supply, which is at least equal to the minimum required for each of these cards.

  At this point, I took out the ATI over-pants 2450 my old machine and tried.  This card at least has not caused the series of 4-5 beeps.  Windows has started.  However, once I log in, Windows tries to install the new (card over-pants) repeatedly, only then, the screen flashes and blinks and flashes.  Then I went into the BIOS.  The BIOS indicates that the system recognizes the card, and that the integrated video has been disabled.  However, there is always a signal coming out of the onboard video output (DVI), so it is not in fact actually disabled.  My feeling is that Windows is trying to control two separate video cards (edge + external), which is what causes the problems.  I can turn off the graphics card over-pants w/under Windows (in Safe Mode) and let the card installed, and things work fine.  However, as soon as I try and activate the card, I get endless cycle flashing monitors.

  I spent a few long sessions with HP technical support and they were useless.  They claim that this is not a problem of HP as the embedded video works fine.  I find this extremely frustrating response.  I think it is a matter of HP, because BIOS doesn't seem to be properly disable the onboard video.  Not to mention that the PC can't seem to properly interface with Windows compatible 8 PCI-E cards that claim explicitly require less energy than this unit has.

  I'm usually pretty computer savvy, but have reached my wits end on this one.  I'd appreciate any help anyone could provide.  I tried all kinds of combinations of variables (i.e. enabling integrated video, setting external card at the elementary level, etc.) through the BIOS, but also combinations of w/under Windows, disable integrated video, but nothing is working.

  900345 VisionTek Radeon HD 5570 1 GB DDR3 PCI Express 2.0 x 16

  Big_Dave,

  Thanks a lot for your quick response.

  The first time that I spoke with HP support, they had me disable secure boot.  Unfortunately my problems (i.e. the cards would not install correctly).  However, after reading the link you provided that I was inspired to try things one last time with a new beginning.  I uninstalled all drivers, removed all cards, re-engaged start-up secured, restarted, close, disabled secure boot, reinstalled the cards and rebooted.  And, this time, the system accepts the card GeForce GT 610.

  Difficult for me to express how grateful I am to you.  I spent two weeks and countless hours trying to get this corrected.  Just I found these forums earlier wish.

  WallMonkey02

• HP ENVY DV7-7203SA: problem starting and drive hard smart error

  Hi Ive had problems to start my computer laptop dv7 envy.

  When I run the diagnostic test on the hard drive get a smart error RU5WJO-6K27T-QFPK1F-60AD03 id C1w33EA #ABU

  Finally I have to start, but a few times I had a no device found startup, but only once did I need to reinstall windows 10

  can any body advise on what means this error code and should I look for to replace the hard drive

  concerning

  er65

  HERE IS THE MANUAL for this PC.  Replace hard drive starts on page 48, but indicated that 56 in the area of the manual drive.

  In this same page 100 reported in the box as 108 States "light up the computer or restart the computer, quickly press ESC, then press F10.  This is part of the BIOS information.

  The set of recovery disks will be back as 'new plant' just as it came when new.  No other software is required.  If M$ Office has been installed, maybe check if the disk key and products are always available.

  To the extent where the SSD, do not have the recovery disk set up to automatically accept that in the PC when you run the recovery disk set.  You can try, but I expect to say that the computer has changed and he does not meet the conditions to use the set of recovery disks.

• HP Pavilion Notebook-15-p157sa: SLOW STARTUP AND SLOW STOP AND BLACK SCREENS

  Im having a problem with my laptop. Startup is so slowww and closing too I have disabled startup items but did not help. Also when I opened my notebook from sleep, she stays on a black screen, I have to make a difficult stop in now power button for 10 seconds or leave battery (I stopped taking it because if it is damaged). Please help me HP.

  EDIT: THIS NEVER HAPPENED IN WINDOWS 8.1 (64-BIT)

  Factory fixed reset

• Pavilion Notebook 15-ab289: problem Conectivity Blutooth

  Hello

  Starting at this (deserted this popular singer UK---> a Dell!

  I recently bought the above and have tried to connect my Samsung tablet and mini Bose speakers to laptop via bluetooth. The laptop has b/t and although devices appear in the laptop they arre unable to 'pair' for some unknown, frustrating reason?

  When "peer" is selected, the laptop just coils and cannot pair... any ideas on how to fix? I have checked/ticked the 'visible portable make' etc, but no joy so far.

  See you soon

  Gazz

  Other then this laptop seems exceptional two days so far)

  HI @GazzH,

  Welcome to the HP Forums!

  It's a great place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the HP Guide's Forums:

  Learn how to post and much more.

  I understand that this is a recent purchase and it works well except that you can't seem to pair up with your Bluetooth devices.

  You did all your Windows updates?

  Did you run HP Support Assistant helps the acquisition of HP updates?

  Here is a link to computers HP - understanding and troubleshooting Bluetooth wireless technology (8.1 Windows, 8, 7, Vista, XP).  Although Windows 10 is not listed the same principles will be applied.

  If the problem persists try this to reset the Bluetooth:

  Step 1. Go to Device Manager and click on Bluetooth to expand the list
  Step 2. Right click on "Bluetooth device" you want
  Step 3. Select "update driver software... »
  Step 4. Choose "Browse my computer for driver software".
  Step 5. Choose "Let Me pick from a list of drivers for devices on my computer.
  Step 6. Select "Ports (COM & LPT)"
  Step 7. Select "Microsoft" to the list of "manufacturers".
  Step 8. Finally select "Standard series via a Bluetooth connection.

  While you're in the right click on your Bluetooth device Device Manager, and then select Properties

  Click the power management tab.
  If "allow this computer to turn off this device to save power" is checked please remove, then click on apply.

  If you are unable to connect to a Bluetooth device, try the following:

  1. type of step' change device' in Cortana
  Step 2. Click on where it says change device installation settings.
  Step 3. Select No, let me choose what to do option.
  Step 4. Check the automatically get the device app option
  Step 5. Click on save changes to save the settings that you select

  So, you can try this:

  Step 1: Go to Cortana and type "services.msc" and press enter
  Step 2: Now find 'Bluetooth Support Service' and double click on it (under the general tab you can change startup automatically if you wish)
  Step 3: Now click on Connect tab and type "Local Service" without the quotes, if it is not already displayed
  Step 4: Now remove any authorization of passwords the password field blank
  Step 5: Click on apply in the lower left corner.
  Step 6: Click on the Recovery tab, and make sure it is set to restart the service after the failure of the first and the second and change it if necessary and click on apply.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts, please click on the Thumbs Up icon below.

  Good luck!