Problems of the stereo channels

Similar Questions

• the wireless signal coverage signal strength is good, but the problem with the health channel network overlap more

  Hello everyone

  In our project after the implementation of the wireless project

  I had done the survey for heatmaps wireless post

  I had signal strength is good for what - 67dbm for 2.4 & 5 ghz

  but the problem that i am facing with bad network health and overlapping of channel are more

  controller to change the autotunning for the channel for a floor for 2.4 and 5 ghz and some APS change us 2 emission power

  for a floor that we tuned we receive good channel and network health overlap report for combined 2.4 and 5 ghz

  but for the single report 2.4 and 5 ghz, report overlap health network and channel are not good

  postsurvey tools that I use for ekahau

  When I use the ekahau tool each time tool message upgarded last skip version or version

  for postsuvey basically for the heatmaps approved as

  1 power the signal should be-67 or de-65 dbm

  Support in this regard will be highly appreciated.

  Wait a second.  I saw this card before floor!

  Are there two of you working on this issue?

• Export DNxHD with 8 channels audio multi... Problem! the final file only stereo all mixed with 6 empty strings.

  I export DNxHD with 8 channels audio multi... My problem is that the final file all mixed in the first 2 stereo channels with the channels empty rest 6.

  I'm lost on what could be the problem.

  The main audio channel is 8 channels... NO stereo.
  Export, I chose DNxHD and audio 48000 Hz with 8 output channels

  
  What could this be? I need to deliver a film with the 8 mono channels.

  Really appreciate all the thoughts/help!

  Thank you

  Christian

  That's how I would implement mixer in CS6's using a sequence of 8 track with 8 mono channels (mono channels using maintains levels matching, stereo and standard tracks can cause differences in level of 3db). Note the Red output channel selection and the panpot position indicated in blue.

  

• YouTube videos online, such as the weather channel or utube, will not play on Firefox. They play well on Internet Explorer, so I guess it's a problem with Firefox.

  Flash player is up-to-date, and Firefox is the latest version. However, no videos will play on Firefox. They worked fine until recently. We used to watch the videos offered on the weather channel, but the screen is black. When I click on the play button, nothing happens.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Problem with the number of lines in the channel

  Dear community LabView,

  I'm relatively new to labview and I came across a problem that (I assume) can easily be resolved with your help.

  I need to create a digital signal to trigger a camera, but I have a problem with the configuration of my lines or exit lanes. I would not use that line output to trigger the camera. (I use a card NI PCIe-6353). LabVIEW is telling me that the number of lines in the channel does not have the number of rows of data:

  Possible reasons:

  Specified read or write operation failed because the number of rows in the data of a string is not the lines in the channel.

  If you use the digital waveform data type, make sure that the number of lines in the digital waveforms is the number of lines in the channel. If you are using Boolean data, make sure that the dimension of the array for the rows of the data is the number of lines in the channel.

  Number of lines in the channel: 1
  Number of data lines: 2

  Task name: _unnamedTask<11>

  How and why the number of data rows is connected to the resolution of my analog digital converter?

  I would appreciate your help! Labview code and a screenshot attached.

  Thank you

  Beff

  I got it to work by changing the "data format" "binary not signed" OR by plugging is not the "offset" for the Square Wave VI.  I think that the default "offset binary" data format works correctly if there is a negative value.

• problem with the configuration of the channel of width 40 mhz on Aironet 1141

  Hello

  recently we bought the model cisco aironet AIR-AP1141N-E-K9 stand alone.  After you have configured it, customer has no problem with the connection and the cover, but there is problem with passage. clients are unable to connect to higher rates, even if I set the width of the channel to 40 mhz, the maximum for compatible client device N rate is 54 mb. 

  can someone give me some advice how to fix this?

  This is my setup, or see attachment file

  http://pastebin.com/1WHeSvmq

     

  Thank you very much

  Please change the encryption used by AES.

  Here's more information: http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080a3443f.shtml

  THX //art

• How can I fix a problem with text wraps where Indesign wrapped text without overtighten the Alpha channel, I created?

  Hello.

  I have a text wrap the problem. I created an Alpha channel in Photoshop on a pic and placed in Indesign and wrapped text. Problem is that the text wrapping is quite different from the Alpha channel created. It's never happened before and I use it all the time. Ideas?

  Perhaps because the image is so low resolution.

  Yes, I see the same even at 300 ppi. If I load the selection of the alpha in Photoshop and save it as a path then it works:

  

  

• How to complete the two channels of a stereo track in a mono track?

  I have recorded on the L channel a stereo recording with the interviewer and the interviewee has recorded on the channel of a. I applied the two fill 'right' and 'left fill' to the runway, then cut and switch between the two, when appropriate. However, when they are all two talk, I'd like that the two channels to be active, but not as a stereo track (because otherwise the sound is actually mono) and turning on the two "fill right" and "fill left" at the same time seems to feed each channel at 50% instead of 100%, at least that's what I guess since there is a significant drop in level.

  Any suggestions? I'm on CS6.

  OK, here is the solution I've worked.

  I created a new track to mono submix at the bottom of all my songs. In the Audio Mixer Panel, I remapped my stereo audio track to go to the mono submix track before going to the master. This forces all the audio out as that mono the end, which is exactly what I was looking for.

  For what it's worth, one track stereo padding right or double left audio and is stronger then the railway normal stereo, even if she plays two audio channels, they don't add to the intensity of the double mono. I just applied a + 4dB gain stereo sections to compensate for this.

• EQ problem since the update, anyone seen this?

  Then got the 10.2.1 update, because then it seems that I can't change the processing mode in the EQ channel more to the side middle, etc, seems to be true for all my instances of the device. Probably something wrong, but what? I almost thought I had been handed in a setting user base or something, but he said that all the advanced features is enabled in the menu.

  No problem here under 10.2.1

  Is the treatment option missing or simply does not...

  If it's missing, make sure that you are not working with a mono stereo track...

  If its does not work and you are sure that all the advanced tools are turned on... then...

  Delete the preferences of the user

  
  

  To remove the user's preferences, follow these steps:

  You can resolve many issues by restoring Logic Pro X back to its original settings. This will not affect your media files. To reset your settings preferences of the user to Logic Pro X to their original state, do the following:

  1. Logic Pro X to quit smoking
  2. In the Finder, select go to folder menu reach.
  3. Type ~/Library/Preferences in the field 'go to folder '.
  4. Press the Go button.
  5. Delete the com.apple.logic10.plist file from the Preferences folder. Note that if you set custom shortcuts, it will reset to the default values. You can export your custom key as a preset before performing this step. See the Logic Pro X user manual for details on how to do it.
  6. If you are having problems with a control surface in Logic Pro X, you can also delete the com.apple.logic.pro.cs file in the Preferences folder.
  7. Restart the computer.

  Note: If you cannot find the files listed above, you don't follow the instructions properly!

  You may need to reactivate later all the advanced tools...

• Problem with the cable to the!

  Hello world

  I had a problem with my Xperia M4, if I insert the cable into the phone, the sound will not be expanded to the speakers, but since the phone. When I had a S3, this problem didn't happen, songs normally expanded by the speakers. Can someone help me :'(

  PS Si there are English errors in the text, don't worry, I'm not English

  Volendrug wrote:

  No, yet again, the problem persists. I tried to use another phone, cable is possibly damaged but with another work phone and with my xperia does...

  Maybe the cable that you are using. I have not yet test, but perhaps could be the problem:

  

  some "aux-in" accepts only stereo or mono or both, I'm not sure. try to use the original Sony first helmet. also compare it with your cable to the.

  on some cases, if the cable is mono, what I've done, it's not not to insert the plug completely. (see the second image) in this way, the right of the mono channel will sit properly on the right channel of the stereo-in.

• No. 5.1 Surround Sound on HDMI in Windows 7 only 2 stereo channels

  I just built a new HTPC runnung Windows 7 64 bit. I used the new M4A88TI ASUS - I Deluxe - M.B. (which has the Ati Radeon HD 4250) and can't get more than 2 channel stereo output in the configuration of the speakers. I have built several HTPC machines in the past but have always used the maps in series 200 from NVIDIA (GeForce 210 and GT 220 and GT 240) which are all sub $100 video cards. I NEVER had any of these audio configuration issues multichannel with HDMI on NVIDIA cards... they are "no brainers" for the installer, only with Ati, these problems exist! Someone please figure out this problem! All the drivers are the latest Catalyst 10.7 drivers and Realtek HDMI R2.49

  Thank you!

  * UPDATE *.

  Well, it seems that this hardware (AMD 880 G with Radeon HD 4250 integrated graphics card) is not capable of supporting more than 2 stereo channels on the HDMI audio output. I tried EVERYTHING (including beat my head against the wall) for 3 days now & I am still not over 2 speaker output. The main reason why I bought this M.B. was so I could use it for a HTPC without having to install a separate video card. It was announced as being capable of 1080 p and up to 7.1 audio channels over HDMI, but it's not just happening. If I go into the configuration of the speakers for the main audio Realtek integrated system all the different options are available for 2-speaker stereo, quadraphonic, Surround 5.1 & 7.1 Surround, but the HDMI interface configuration only 2 stereo audio speaker is available NOTHING else! I understand that it is the material that determines what are the audio options are available in the configuration of the speakers, then maybe HDMI on this M.B. only supports 2-channel stereo? Very sad as this White House is especially designed for home theater use. I can put in an NVIDIA GeForce GT 220 & everything goes well all the way up to 7.1 surround channels, so I guess I'll be staying in the future with NVIDIA & NOT to waste more time or $$$ with Ati.Wrench

• The alpha channel of delivery images - is there a standard?

  I need to provide a logo in 3D with alpha channel of a television station local to a customer and of thought, I would like to ask if there is a standard for this?

  I suspect Apple .mov is likely but as a windows user, I never use but have no problem with it.

  For lossless I use "UT Video Codec", it's free, fast, and I had good results.  I don't KNOW if I book in this format, it will cause a problem for the other end... call it a hunch.

  Call the station.  Ask for technical service.  They will tell you, you can ask on the tray, codec, frame rate more horizontal & vertical resolution.

  Now, if he came to MY station, I would accept 1280 x 720, 59,94 FPS, quicktime movies in the Animation codec, with a straight line (i.e. NOT premultiplied) alpha channel.  Stereo audio.

• I got 40 Firefox and I'm on the beta channel - why do I get messages saying that my browser is not updated?

  I've been on the beta channel for centuries and have found this problem for some time. Many Web sites meet that my browser is not up-to-date, as the Mozilla site done before asking this question, but when I check updates the answer is always that the browser is up-to-date.

  Why?

  Hi larssonswood, this is caused by the masking extension agent you have installed.

  Disable or remove modules

• Divide the Audio channels?

  Is it possible to split stereo audio (as from iTunes, for example) so that the left output channel passes to the left speaker to the left of a pair of screens Thunderbolt and the output channel right to the right of the screen to the right speaker?  The 'average' channels should be silent:

  SOURCE DISPLAY LEFT         

  L — — — | ------> OUT L

  |     R OUT (entry/no cut)

  |     ——————————————————————

  |     L OUT (entry/no cut)

  R — — — | ------> R OUT

  RIGHT DISPLAY

  I do not know... Try to play around with the Audio configuration utility and MIDI: http://www.macobserver.com/tmo/article/audio-midi-setup-your-macs-secret-sound-m anager

• Satellite Pro P100: Can which digital cable I use to connect the stereo

  I just bought a new P100 and think generally that it's great.

  However, if I plug it into my stereo via the headphone to the front of the computer, then it is very noisy. I read somewhere in the manual that this Jack is used also in digital form - weird! Is there a way to transform digital or I'd be better connection on my external (stereo only) DAC. If this option is ideal so what cable should I - nothing about this in the manual or on the Tosh site. I use a stereo plug for cable twin phono right now.

  Any advice from someone who has connected to their own hifi would be appreciated.

  Bill Mac

  Hello

  The headphone jack offers the possibility to S/PDIF which allows to connect the laptop to the hifi on digital channel.
  You need a simple cable S\PDIF. This cable you can get from each computer/laptop.

  Simply visit this dealer and ask for this kind of cable

  By the way: try to disable the option of its virtual when the laptop is connected to the stereo