Satellite A300-1NO - wakes up to the top of the standby mode

Similar Questions

• Satellite A300-1NO - webcam does not work, but the LED lights

  Hello!

  I have a laptop Satellite A300-1NO, with Win 7 installed. My problem is that my webcam does not work always, when I want to use it. Sometimes, it works perfectly in Skype, WLM etc... but sometimes I see a white or a black screen with a 'loading circle' in there. Blue is the LED light, I can see it in Device Manager too, but there is no picture, just 'loading '. I tried to uninstall the driver and then reinstall it, I installed the new "camera Assistant for Toshiba", without success.

  Is there any solution for this?

  > Is there any solution for this?
  I put t think there is solution for this. If I understand you right there is a problem with software pre-installed. It is not easy to say why this is happening.

  I have Satellite A300 too and use it with Win7 32 bit. Webcam works fine all the time.

  One more thing: have you noticed this problem in the first moments after installing Win7 or later?
  Have you installed something that may be the reason for this?

• Satellite A300-1NO - Power Saver crashes

  Hello

  I get a fatal error when starting electric saver application, code 0 x 2

  I have a Satellite A300 1NO with Windows XP. When the energy saver tries to start it gives this error code and accidents. This happens with the installer to start too.

  Assuming that the cause is the lack of files required by power saver. What can we then these files?
  ProgFiles/Toshiba and its subfolders are intact. I deleted some files from windows dir, who seemed unused, and needles. for example. directories and temporary files. And I think, that it is possible that some useful files have been deleted accidentally.

  So, it is possible that the cause is missing some files in windows? Otherwise, I have no idea of what was happening here exactly...

  Post edited by: Emoryy

  Hello

  I ve page no idea why your Power Saver crashes but before install you any what Toshiba you tools should updated Win XP to the current state, and then you need to install the common Modules of the European of Toshiba.

  Common modules is an essential component of Windows systems.
  He will perform the other original programming from TOSHIBA to work properly.

  So uninstall the old Power Saver, clean the registry and operating system with a free tool (i.e. CCleaner), install common Modules, and Power Saver.

  Good bye

• Need remote control for Satellite A300 1NO

  Hello world!

  I would like to buy a remote control for my satellite A300 1NO, but I have found no information on this tool.

  Most important, it's a remote controls exist for computers laptop toshiba?

  Thank you!
  PG

  Hello

  I started a similar thread about remote control on Satellite A300:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=37732

  If your laptop can be used with the remote control, you should get in touch with an authorized service provider. They sell all spare parts Toshiba and give you more information on this feature. :)

• How can satellite A300-1NO - I record sounds?

  Hello. I have a Satellite A300 1NO machine, but I don't know how to put my sound card, because I want to record all the sounds that play my sound card. For example, listen to internet radio, and record a track of her.

  I cannot set my microphone to record it and can't see any more. WaveOut or something else... How could I solve this problem? I have the 6.0.1.5599 of its driver.

  Hello

  If you want to record the sound that plays the sound card, you need another program. So it is not possible to record sound only with the audio driver.

  There are many programs that can do this. I have good experiences with no. 23 Recorder. Use Google to find out. Its freeware and easy to use.
  In addition, there are some programs that streams internet radio, and save as. But I n t use such a program, but Google can help you find one.

  Welcome them

• Satellite A300-15 was: How does the Toshiba control keys?

  I recently bought a Satellite A300-15A; model: PSAJ4E;

  The laptop has 6 multimedia keys on top.
  As described in the manual, they are supposed to perform the following functions shown (from left to right): (I'm dialing for convinience to talk about later)
  1 mute / power button LED
  2 CD/DVD button
  3. Play/Pause button
  4 Stop button
  5. back button
  6 next button

  Can someone explain all the buttons above.

  The only function these peform for me are as follows;
  1st button only allows the LED turned off/turned on but does not any silent operation with any application (not even Windows Media Player). Even when he performs the operation LED is off; only 6 keys and the bottom screen 'SATELLITE' is disabled; the other LEDS (in DC, Powe. Drums, disks) are always on... What is the problem and how do I start its silent operation so that I can cut the pc with any operation of the application.

  2nd button does that open Windows Media Player. What it is supposed to do exactly?

  All other keys do nothing but work on Windows Media Player. They do not work on any other application; either VLC or any other. How can I make it work on all multimedia applications...

  Please do develop and respond with solutions.

  The last of the woks to buttons ONLY with Windows Media Player! You can't use it with 3rd party like WinAmp player.

  According to the first 2 buttons:
  You can change the functionality assign the right exe file.

  For example:
  If you want to assign the light On / Off instead of Mute, you have to go

  Toshiba Assist-> optimize-> Toshiba Button Support.
  Select Dimmer.exe and click on register and click on 'Browse' button to Toshiba support and go in C:/Program Files/Toshiba/Toshiba button Support (or TBS)

  Now the button will start the dimmer.exe

  Even you can do if you want to use Mute or other applications

• Satellite A300 - 1 l 4 brings the remote?

  Satellite A300 - 1 l 4 brings the remote?

  You want to say if the Satellite A300 - 1 l 4A was delivered with remote control?
  The remote control is optional. Some A300 are equipped with remote control and some books don't stand.

• Satellite A300-M01 - fingerprint - cannot open the sensor with Win XP

  Hello

  I got a Satellite A300-M01 with Windows Vista but my my software is very slow, so I'm a Windows XP Installer to put in. After that, the fingerprint reader no longer works the registration of fingerprints he'll only say 'Cannot open the sensor' and if you access the service of this device it says "specified device instance handle does not match this device."

  I already downloaded the driver for this sensor of isd.toshiba.com.au, but after the installation, the problem is the same. Any info is much appreciated.

  Thank you.

  Ray

  Hello!

  Have you installed the tools and all the other drivers of Toshiba?

  Search on the Toshiba site for a BIOS update.
  Maybe this can solve the problem.

  Good bye

• Satellite A300 - Vista does not load, the computer does not start

  Satellite A300
  Model number: PSAGCA-02W010

  Vista won't load; have you tried to start repair; System Restore and boot in safe mode, none of them work. I get the error "error 0 x 80070570: the file or directory is corrupted and unreadable."

  I don't know what I did with my recovery CD; or if I even got one with my purchase (from Harvey Norman).

  Please tell us what can be done.

  Hello

  What you can try is to install Vista using disk HARD recovery option.
  How it works, you can read on http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  If it works all the data saved on the C partition will be deleted but the data saved on the D partition will always be there.

• Satellite A300-1NO - built in microphone has its Sun

  Hello everyone.

  I noticed that my microphone is very low volume. When I voice chat, people barely hear what I speak. I got the Realtek HD Audio Manager, downloaded the audio driver on the Toshiba site. All set to 100%, amp microphone is only 20 dB 30 dB is too noisy. I checked also Assistant of webcam. I don't know what to do.

  When I use the external microphone, it's OK. But the microphone is calm and flat, dim.

  Hello!

  I m not a Satellite A300 owner but it seems that you only need to update the audio driver. Here is the Toshiba document I founded on the site of Toshiba about this:
  http://APS2.toshiba-tro.de/KB0/TSB8A02FH0000R01.htm

  The driver can be downloaded here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Re: Satellite A300 cannot start, cannot use the factory recovery

  Hi all, I have a Satellite A300, which gave me problems in the past few weeks...

  I use Windows Vista

  There are about 2 months in the beginning of the laptop problem, it restarts itself automatically before enter in windows (while in the windows loading screen, no blue screen, screen just suddenly darkens and restarts itself), but it will get finally in windows successfully after a few loops

  but about 3 weeks ago, it just keeps looping and never get into windows, good news, it is that it can capture mode safe without problem

  I've done everything I can to try and save, as play with msconfig, drivers, removing the Rams etc, but not luck

  so, I save everything in safe mode and decided to restore the machine factory, but the problem is that when I boot up the computer by pressing 0 and enters the recovery screen, reboot loop will happen!

  any idea? or y at - it another way to restore to factory without touching the windows installed in my laptop? is it a hardware problem or software?

  I thought about the creation of recovery disks but my cd drive is not working properly, and I don't want to take the risk of buying an external cd drive not knowing not if the problem can be solved...

  Thank you very much!

  >.. .i don't want to take the risk of buying an external cd drive not knowing not if the problem can be solved...
  That of right, but you must understand that it is not easy on this virtual path to offer an accurate explanation and diagnosis for your problem.

  It is not easy to tell whether it is hardware or software related issue. best way to test is installation of recovery image. Recovery image is tested and if there are no some portable hardware problem should work fine. How to install the recovery image, which you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  >.. .or is there another way to restore to factory without touching the windows installed in my laptop?
  Something like this is not possible. Windows that you use now needs to be reinstalled. I don't know why you the laptop restarts, but it's also the risk of recovery image installation. In case this recovery image installation will be interrupted, you will have two problems:
  -image of original recovery saved on your HARD drive will be unusable
  -you will not be able to start t

  In your situation the best is to minimize this risk and have original recovery DVD that can be used if something goes wrong.
  > but the problem is that when I boot up the computer by pressing 0 and enters the recovery screen, reboot loop will happen!
  Can you please explain what is exactly happening? Is - this laptop is simply cut off / go to the coast and then reboot again or what?

• Satellite A300-1ED-CD-key for the installation of Vista OEM?

  Hi all!

  I have question. Can I legaly use cd key of windows vista Home premium preinsaled on my Satellite A300-1ED to install a clean oem Windows Vista Home Premium without toshiba or mcafee software?

  Many thanks for the answer!

  You can try to do, but it won't work. This key will not activate your own operating system preinstalled.
  This product key is for the recovery image, that you got with your laptop.

  Many people understand this wrong, especially when they sell old books on eBay and wrote: legal production key is on the bottom. And what to do with this key? You can't do anything with it.

• Satellite A300-1EH - where to find the key for Microsoft Works?

  Satellite A300-1EH

  My laptop has been repaired. Exchange service throughout the system. I have serious problem since then.
  The new version of Microsoft Works requires me 25 - the key of the product registration. I don't have him. Where can I get this version, the product key?

  It did not help me Microsoft or service. They sent me manufacturer...

  Hello!

  You have installed a newer version of Microsoft Works? Normally, you can only use the version preinstalled work and so you do not need a key. It s already active and ready to use.

  I think you use HARD drive recovery option to get a working dos version Works. :(

  Good bye

• Satellite A300 - does not connect to the secure network to WPA

  Help please... new Toshiba Satellite A300 - running XP Professional with atheros AR9281 (driver 7.6.0.200) wireless network adapter will not connect to the secure networks, WAP, but seems to be fine with the WEP and non secure networks?

  I can connect to my WAP secured network using LAN cable and also if I use an external Netgear wireless adapter, so the problem is probably with this adapter or driver. I updated the bios and tried update driver, but no luck. Current driver is (I believe) more up to date?

  Would be grateful for your help.

  Thank you.

  On the Toshiba site is a newer version of the driver available (7.6.1.149.1)
  Then I would try the new driver.

  Consult the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• Satellite A300-1JJ - weird lines during the game

  Sorry for my English, Im no native speaker, Im from Russia

  It is easy to show what goes wrong, than to explain...

  http://www.picamatic.com/view/4030436_1/
  http://www.picamatic.com/view/4030437_2/
  http://www.picamatic.com/view/4030438_3/

  I have the same lines in the GRID, GTA 4, call of duty 4 etc...
  At the same time I have no problem when I see movies, work in PhotoShop. I have also NO problems with games such as Resident Evil 5, Borderlands, Call of Juarez etc...

  I don't know what the problem... I've changed the settings in CCC, reinstalled and installed the latest driver ATI using Mobbility Modder...

  My config is:

  Laptop Toshiba Satellite A300-JJ
  Intel Core 2 Duo T5750 2.00GHz

  4.00 GB RAM
  Vista 32 SP2

  ----------------------------------------------------------------------------------

  Driver Version packaging 8.661 - 090923 a-1 - 083742C - ATI
  Catalysta ¢ A? Â ¢ Version 09.10
  Provider of ATI Technologies Inc.
  2D 8.01.01.961 driver version
  / REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/Class path of the file to pilot 2D / {4D36E968-E325-11CE-BFC1-08002BE10318} / 0000
  Direct3D Version 8.14.10.0700
  OpenGL Version 6.14.10.9026
  Version of Catalyst Control Center 2009.0925.1707.28889

  ------------------------------------------------------------------------------------------

  Main card
  Manufacturer of graphics, Powered by ATI cards
  Graphics Chipset ATI MOBILITY RADEON HD 3650
  Device ID 9591
  Seller 1002

  Subsystem ID FF1C
  Subsystem Vendor ID 1179

  Ability to PCI Express 2.0 graphics Bus
  Maximum bus in PCI Express 2.0 x 16

  010.084.000.000 BIOS version
  BIOS part number BK - ATI VER010.084.000.000.028109
  Date of the BIOS 03/17/2008

  Memory size 1790 MB
  Memory Type HyperMemory

  Basic MHz 600 MHz clock
  MHz 500 MHz memory clock

  ------------------------------------------------------------------------------------------
  PS: I guess that happens in DirectX9 games, because in DirectX10 works well...

  Service center told me that the temperature of the graphics card is ok

  Help, please

  Hello

  I searched a bit on the site of Toshiba, and with Google, but I could t find Satellite A300-JJ. Are you sure that it s Satellite A300-JJ?
  I ask this question because I wanted to learn more about this laptop.

  However, for me, it looks like a driver problem. I recommend you to install the most recent * Windows 7 driver * you can find the Toshiba site for your laptop. It is the most recent works also under Windows Vista:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Please try and post your result. I have too many Satellite A300 and before that I've upgraded to Vista I also installed the Windows 7 driver to make it work under Vista.