Problems of the uninstalling programs

Similar Questions

• Firefox does not stop, I'm trying to uninstall it to solve a problem, but the uninstall program said close even if I did open.

  I just ran the health report and it says that Firefox has been open nearly 6800 minutes in July, I only use this computer perhaps 2000 minutes per month and still less navigation. How do you make a hard stop Firefox?

  Thanks, I tried the Task Manager course, and she did not also running. Started in safe mode, deleted firefox, restarted and did a new download. My problem is solved.

• I uninstalled Premiere Pro CS6 on a Mac after experiencing a problem loading, how can I reinstall it? I used the uninstall program.

  I uninstalled Premiere Pro CS6 on a Mac after the program stuck on ImportingQuicktime.bundle. I used the uninstall program, but now I can't get the program to reinstall again. Can someone help me with this?

  Thank you!

  You want to just install the first Pro CS6, you can download it directly, the screenshot below:

  

  Download the two files for MAC and you will be able to install the first Pro CS6.

  Concerning

  Varun

• I deleted the uninstall program. How do we uninstall Muse CC?

  Yes, I did what I do - remove a CC app without using the uninstall program. Now, the Borg CC think I Muse CC on my hard drive. In fact, I Muse CC 2014 on my HD.

  But check this out, when I open the uninstall program Muse CC 2014 I get this:

  

  Hmmm. So is this serious? He proposes to get rid of my old version of CC (which at this stage means simply that the pilots and the blasting prefs)?

  Or... is there a place for me download the official CC Muse uninstall program so that the Borg knows is more on my drive?

  It did not work. However, I noticed that uninstalling was available in the CC itself, the menu window drop down hidden you will see that when you move the pointer. It is now uninstalled. Thank you.

• I can't use my webcam to computers because of a problem with the cyberlink program

  I only had my laptop for less than a month. I went to use the web camera and succeeded in a first time. Now I can't access the web camera. The message that keeps popping up is a message about the cyberlink program. Can someone help me?

  Hi Lynda Haynes,

  1. What is the exact message you get?
  2. what operating system is installed on your computer?
  3. What is the brand of your laptop?
  4 did you go to the device manufacturer's Web site to download the latest drivers?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Update of your webcam drivers and check if the problem persists.

  Step 2:

  Uninstall and reinstall Cyberlink and check if the problem persists.

  Step 3:

  Test the issue in a clean boot State.

  Note: Follow step 7 to your computer as usual.

• CLICK ONCE THE UNINSTALL PROGRAM HAS STOPPED WORKING

  I'M UNABLE to UNINSTALL a PROGRAM CALLED BESTBUY PC approx. AND I ALWAYS GET THE SAME ANSWER, whenever I TRY TO UNINSTALL it FROM MY COMPUTER. THANK YOU FOR YOUR HELP HAVE A NICE DAY...

  Here are a few FREE uninstall programs...

  IObit Uninstaller 1.1
  http://download.CNET.com/IObit-uninstaller/3000-2096_4-75161625.HTML?tag=mncol

  Advanced Uninstaller Free 10.1.1
  http://download.CNET.com/advanced-uninstaller-free/3000-2096_4-75157230.HTML?tag=mncol

  Revo Uninstaller 1.91
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  Note: Personally, I would try Revo Uninstaller 1.91 first because I use it in my computer and it has not yet I miss. So I can vouch for it.
  I'm sure that the other 2 are just as good, if not better, but I don't have any personal experience with them.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I have exactly the same problem with the radial program point not to let me install mcafee what should I do?

  I'm having the same exact problem with the point radial program does not let me install mcAfee which can do?

  There is some information about this here: https://community.mcafee.com/thread/19119?start=0&tstart=0

  If this does not help, contact McAfee technical support. They should help you.

• problem when the old program running on windows 7

  Hi I am using windows 7 64 bit.

  At the moment, I really wanted to go back to the era when I still have a kid who play soccer games on computer. at this point, I use windows xp, and it's my favurite game program

  Manager FIFA soccer 96/97

  The 98 World Cup

  FIFA 99

  the 99/00 Championship Manager

  now I am using windows 7 64 bit and meet a lot of problem

  the game works well, because I set the compatibility mode to windows 98.but it is just the text.so in the game of football, his divided to two parts. the first part is text, where we see players, statistics, etc. that work well

  the second is soccer game. I believe that associated with vga and color. and that's the problem. I see so many pixel, playing the football game on these games

  I guess that this is related to my "64 bit version" of windows. because when I was googling somewhere, I see old-fashioned, using 16-bit. This my vga downgrade and cannot display video smoothly.

  What should I do?

  Hello

  Please contact the Microsoft Community.

  I wish that you contact the respective developers of the game or play the game and check if there is a patch available for the same thing.

  We know if you need help.

  Thank you.

• Printing problems with the Paint program

  Used the Paint program for years, no problem.  Suddenly, every time I print get a very tiny copy as if it has been reduced by about 75%.  If I try to enlarge before printing, etc., it gives me anywhere between 10 and 20 white sheets before give me a very tiny copy.  I used different printers with the same result.  I love this Paint program and would like to get back to where he was.

  And the program of mystery?

• Problems of the uninstalling applications

  I have problems to uninstall programs on my computer. I use creative cloud window to manage my applications, but to try to update or uninstall them, I get a notification of failure.

  Sign out of your account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

• Premiere Pro CS4 - problem with the monitor program.

  Hello. I am not able to solve the problems with the monitor using PremiereProCS4. When I drag a photo (also only one photo) in the timeline panel and read it in the monitor program, vision in the monitoring program is not monitor of race: black or a small part of the picture appear... sometimes changing colors. ASUS P5QPRO Intel 9550 and Sparkle Nvidia GeForce 9800 GTX + 1024 DDR3; directX and the latest gpu driver are installed. Different configurations of Strath discs have been tested. Where I'm wrong?

  Although largely in the max. PrPro range, which is always likely to much larger size than that required. This ARTICLE will give you general information and a workflow possible.

  Coming from the camera, JPEG should be RGB already, so no problems with CMYK.

  Good luck and hope that helps.

  Hunt

• How uninstall when the uninstall program does not work?

  I get this when I try to uninstall Acrobat X Pro so that I can reinstall so that I can get the update that always gives me an error 1301 and does not update.  It is a complete mess.

  Most Mac applications can be uninstalled just moving them unceremoniously in the basket (as long as they are not running in time, of course). Simply move Adobe Acrobat X Pro to the trash, make sure that your mac still works correctly, and then empty the trash.

  Of course, it is always recommended that you use the uninstall application when it is available, but it did not work this method is fine!

• Problems with the external program

  I create programs programmer with a string. A job will be created to launch the channel. One of these programs Planner will have to call a file is under windows. Everything goes well with the exception of which translates an error indicating that the process cannot find the files referenced in the external program.
  
  Here is the error of the battery being captured in the job log.
  
  CHAIN_LOG_ID = "16735", STEP_NAME = "L90_ARCHLOGRMANBACKUP", ORA-27370: slave to the job could not launch EXECUTABLE type work
  ORA-27300: dependent operation of the OS: access enforcement officer failed with the State: 2
  ORA-27301: OS Error Message: the system cannot find the specified file.
  ORA-27302: an error occurred in: 6a sjsec
  ORA-27303: additional information: the system cannot find the specified file.
  
  This is the code I used to create the program:
  
  BEGIN
  SYS. DBMS_SCHEDULER. CREATE_PROGRAM
  (
  program name = > "RTDB. ARCHLOGRMANBACKUP'
  , program_type = > 'EXECUTABLE '.
  , program_action = > ' C:\WINNT\system32\CMD. EXE'
  number_of_arguments = > 3
  activated = > FALSE
  , comments = > 'runs a RMAN backup compressed all archive logs generated by this process.
  );
  
  SYS. DBMS_SCHEDULER. DEFINE_PROGRAM_ARGUMENT
  (
  program name = > "RTDB. ARCHLOGRMANBACKUP'
  , argument_name = > "
  argument_position = > 1
  , argument_type = > "VARCHAR2".
  , default_value = > "/ q"
  );
  
  SYS. DBMS_SCHEDULER. DEFINE_PROGRAM_ARGUMENT
  (
  program name = > "RTDB. ARCHLOGRMANBACKUP'
  , argument_name = > "
  argument_position = > 2
  , argument_type = > "VARCHAR2".
  , default_value = > "/ c".
  );
  
  SYS. DBMS_SCHEDULER. DEFINE_PROGRAM_ARGUMENT
  (
  program name = > "RTDB. ARCHLOGRMANBACKUP'
  , argument_name = > "
  argument_position = > 3
  , argument_type = > "VARCHAR2".
  , default_value = > 'C:\oracle\product\OraDB102\admin\DTOD\work\RMAN_ARCH_OPENDOR.bat '.
  );
  
  SYS. DBMS_SCHEDULER. ENABLE
  (name = > ' RTDB.) ARCHLOGRMANBACKUP');
  END;
  /
  
  To verify that the files referenced in the above code and paths are correct, I spent to the DB host and run the following command from the beginning... Run:
  
  C:\WINNT\system32\CMD. EXE/q/c C:\oracle\product\OraDB102\admin\DTOD\work\RMAN_ARCH_OPENDOR.bat
  
  It works very well.
  
  Someone at - it ideas?
  
  Thank you
  
  -Joe

  Hey Joe,

  What you run here are steps of external string, which are transformed into external work when they are executed (see steps chain) upwards in the view of all_scheduler_jobs so that they are running.

  All restrictions for outdoor work hold for the external chain so that you will always have to make sure that the agent Scheduler service is running as a user who has the logon as batch windows privilege and upward.

  A simple external task works for you? If this is not you should probably get that working first and then debug your chain example later.

  Hope this helps,
  Ravi.

• Problems with the postal program error... System.IO.IOException: The handshake failed due to an unexpected packet format.

  Since a couple of days, I was receiveing an error message, I don't remember not change parameter or by downloading programs.  What to do to fix this problem...

  Unable to connect to mail servers. If please specify a valid e-mail server, the server properties, or check your network connection. The following exception occurred: System.Reflection.TargetInvocationException: Exception has been thrown by the target of a call. ---> System.IO.IOException: the handshake failed due to an unexpected packet format.
  at System.Net.Security.SslState.StartReadFrame (Byte [] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest)
  at System.Net.Security.SslState.StartReceiveBlob (Byte [] buffer, AsyncProtocolRequest asyncRequest)
  at System.Net.Security.SslState.CheckCompletionBeforeNextReceive (ProtocolToken message, AsyncProtocolRequest asyncRequest)
  at System.Net.Security.SslState.StartSendBlob (Byte [] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
  at System.Net.Security.SslState.ForceAuthentication (receiveFirst, Boolean, Byte [] buffer, AsyncProtocolRequest asyncRequest)
  at System.Net.Security.SslState.ProcessAuthentication (LazyAsyncResult lazyResult)
  at System.Net.Security.SslStream.AuthenticateAsClient (String targetHost, clientCertificates X509CertificateCollection, SslProtocols enabledSslProtocols, checkCertificateRevocation Boolean)
  at System.Net.Security.SslStream.AuthenticateAsClient (String targetHost)
  at AdvancedIntellect.Ssl.SslSocket.StartTLS)
  -End of the exception stack trace internal-
  to aspNetEmail.EmailMessage. ? (String)
  to aspNetEmail.EmailMessage. ? ()

  I'll probably try disabling the Norton scanning function (which can require uninstalling/reinstalling Norton without this feature), as it can sometimes cause problems.

  Have you tried to contact support Email Sender Deluxe?

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• problems with the uninstall application

  Summary of the issue
  How to uninstall Windows Live family safety?

  What version of Windows Live Family Safety do you use?
  Other

  Additional details
  When I try to uninstall parental controls, I followed the steps provided and then click "continue". After that I click on continue nothing happens and the application is still on my computer. Don't know what version it is old. It's just too boring to be constantly signing in order to turn it off.

  Hi shamac,

  There could be some corrupt elements in the client Windows Live parental controls installed on your computer that you cannot uninstall it. Please try our Solution Article on the deletion of the customer in your computer to fix this problem:

  Uninstalling family safety

  Thank you!