problems of the use of iSCSI in vSphere.

Similar Questions

• I am facing problem in the use of applications of windows8. I am not able to use even a single App. What shoulg do. ?

  I am facing problem in the use of applications of windows8. I am not able to use even a single App. What shoulg do. ?

  Hi Shubham,

  You receive an error message when you try to use the Apps in Windows 8?

  Exactly how have you connected to the computer (Microsoft Account or Local account)?

  follow these steps to solve the app suggested you nuisance.

  Method 1:

  Run applications troubleshooting

  I suggest you to download and run the troubleshooter modern UI App.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 2:

  I suggest you follow the steps in the article. Here is the link for your reference.

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app

  Method 3:

  I suggest that you check the proxy settings because if you use the Proxy Server, then the Apps in Windows 8 will not work.

   

  a. click on thegear box in the upper right corner in Internet Explorer.

  b. click onTools and then click Internet Options.

  c. click on theConnections tab, and then click LAN settings.

  d. Uncheckuse a proxy server for your LAN .

  e. clickOk.

  Hope the helps of information provided.

• Satellite P200 - problem with the use of disk HARD original as external drive

  I've been pulling on my hair for a month now and could do with help

  I have a Satellite P200 series PC laptop and have recently updated from the 200 GB for a pair or 320 GB HARD drive. No problem

  The question I have is that the old drive of 200 GB system I am unable to use it in any other machine or according to and external storage device.
  The original secondary disc works fine few matter where I use it... (In my PS3 at the moment)

  When I install the orgional system drive in my laptop and rebuild windows it it still works 100%.
  Hance a good work of 200 GB of HARD drive.
  Take it out and serve in another machine of storage that it won't - boot all I get is cyclic redundancy errors

  I formatted, low level run endless disk tools
  WD test came back with diagnostics Test::Read 11 - cable sector error!

  Even as a drive on the original laptop is the same

  All ideas taken with gratitude that I don't want to lose a good 200 GB HARD drive

  Thank you very much
  Roger

  Hello!

  The external box is maybe defective, because you said that the HARD drive works in your laptop and the PS3 without problem.
  You can test the HARD drive in another external case?

  WD test unknown to me but I always use the Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. You can then the HARD drive.
  On the same site is a user's guide if you want to know more.

  Good bye

• Problem with the use of MID/LEFT functions

  I have a problem, see the point of these functions if (as seems to be the case) they will not allow another cell to be referenced.

  I want to do a SUMIFS with match being the first four characters of another cell data. I can't find any way to do it without manually copying the first four characters in another cell.

  If I use only LEFT like this:

  LEFT ('ABCD', 3) to derive 'ABC '.

  so why would just enter ABC in the first place? But that's what show examples and any attempt to do what I really want

  that is LEFT (F19: 3)

  causes a syntax error.

  I believe that I'm missing something really stupid, but I'm darn if I can see it.

  Hi jon,

  LEFT (F19: 3)

  causes a syntax error.

  Try a comma in place of the colon

  

  = LEFT(B2,3)

  It's your area used for the decimal point. If you use the comma for decimals, use a semicolon in the formula, = LEFT(B2;3)

  Kind regards

  Ian.

• I have a problem in the use of 'DAQassistant '.

  Hello world. I am a new learner to labview and China. When I use labview 2014 and DAQassistant with advantech USB4750, it will display ´error-536805376· "¢ Euou ToErrorCluster.vi ' and 'Get a unique temporary file name.' I reinstalled times serval labview and win7, but it still has the same problem (initially, I work well., but finally it did not work sorry for my english.and happy Chinese new year to all.

  a version of this tool also have problem then try using a different version of the

• Help, please! Problem in the use of http to call the url?

  Hello

  I develop application for Blackberry 8830, which is the cdma device. I want to develop the application that uses the http protocol to call url and gets the response. To use http everything I read there about 5-6 ways. But the only one that fits my needs is direct TCP. But my service provider in India i.e. Auntie Indidcom says that there can be no adjustments to the AFN for CDMA phones. What should I do now. I don't really know if that's the only problem.  I have this thread

  Different ways to connect with Http.

  There are six ways mentioned below: -.

  1 blackberry Enterprise Server with Blackberry MDS - I have Blackberry Enterprise server, so this is not possible.

  2. blackberry Internet Service - for this, the Alliance with the RIM so still no thuought on this subject.

  3 order TCP - do not get the APN settings

  4 WiFi network - I'm not network Wi - Fi is also to the equation.

  5. WAP Gateway - not looked into this yet.

  The only way I thought direct TCP, but it requires settings APN, but the message that I received from the people of Auntie, it's that the APN settings is supported for GSM based phones and not for CDMA phones. So is it possible, if yes, then please let me know, its urgency.

  Here is the code that I use for the connection.

  HttpConnection httpConnection = null;
              DataInputStream dis = null;
              DataOutputStream dos = null;
              url = "http://mailonphone.com:8180/automaticlicensing/LicensingServlet?" +
                    "UserName=ilesh&Password=ilesh123&SiteCode=012345678901234567890&" +
                    "ScratchCard=05533978;deviceside=true";
              System.out.println("URL=>" + url);
              try
              {
                  httpConnection = (HttpConnection)Connector.open(url, Connector.READ_WRITE);
                  httpConnection.setRequestMethod(HttpConnection.POST);
                  InputStream istrm = httpConnection.openInputStream();
                  String resMsg = httpConnection.getResponseMessage();
                  System.out.println("REsponse Message=" + resMsg);
                  int length = (int)httpConnection.getLength();
                  String str;
                  if (length != -1)
                  {
                      byte servletData[] = new byte[length];
                      istrm.read(servletData);
                      str = new String(servletData);
                  }
                  else  // Length not available...
                  {
                      ByteArrayOutputStream bStrm = new ByteArrayOutputStream();
                      int ch;
                      while ((ch = istrm.read()) != -1)
                          bStrm.write(ch);
                      str = new String(bStrm.toByteArray());
                      bStrm.close();
                  }
                  System.out.println("Registeration Key=>"+str);
                  int in=str.indexOf("");
                  int en=str.indexOf("");
                  key=str.substring(in+6,en);
                  key=key.trim();
                  System.out.println("KEy="+key);
              }
              catch(Exception ex)
              {
                  System.out.println("Error while calling url");
                  key = "In catch while calling url";
                  //sendMenuItem.setText("Message not send");
              }
          }
  

  If there is a problem in the code then let me know also. I could not test this even on the MDS do not work on simulator emulator. Look into that, but if its related to another question please let me know.

  Thank you & best regards

  Sunil

  The exception it throws in wrestling, will give you an idea about the problem.  I suspect something is wrong with your data, for example, you have specified HttpConnection.POST, but you provide no post data, so I think that you really wanted to say HttpConnection.GET.

  WAP 2.0 does not work on the Simulator.

  I recommend that you get your code work using the Simulator (i.e. ";) deviceside = true') until you are exposed to problems trying to connect on a real device.

• problem with the use of the model

  Hello

  I use Photoshop CC and all the time I have a problem with the help of veneer of reason. In fact, I can't use any template, because when I opened the window of boss, there is always this same situation-> window does not open properly /It is the visible part of the window and when I pressed on it do not bosses see / so I can't use any model - printscreen below :

  

  How can I solve this problem?

  Try resetting your preferences.

• tab of the use of space for vSphere 6.0 disk...

  Hello everyone,

  in vsphere 5.x, there is a tab that shows the use of the disk of all or selected virtual machines.

  In short where he in vsphere 6.0 or have it remove altogether? If so, how can we get the information now?

  Concerning

  Harro Nehlsen Nehls

  what you hear is storage views

• Problem with the use of the lightbox in combination with buttons on the Master slide

  I want to use one have a Walker of popup layer (with content), the user clicks a button on the slide.  The user can close with a button which also appears Walker that the lightbox appears.

  The lightbox layer covers the complete breech the user should click the button close before the next slide can be visited. Everything works fine

  Problem:

  Then I used and prevoious buttons on the slide master and although the layer seems to be on the top of the next and previous buttons, they stil working.

  How can I prevent the buttons on the master slide to work Walker watch the light table?

  Vico

  Each interactive object remains active even if it is covered by a non-interactive object.

  More information on the use of the shape of the buttons, either model of slides or time during the rest of the project: http://blog.lilybiri.com/why-i-like-shape-buttons-captivate-6

  ATTENTION: during time during the rest of the project, to make visible everywhere normally you put on top. But in this case, which means they'll be on top of the viewers. I did pass on the viewers once, maybe I should write in a blog.

  Lilybiri

• Problem in the use of JSONDATAACCESS for parsing json getting as the server Http response.

  Hey Hi,

  I was tired this solution but get a problem. The problem is when I am trying to build my project it gives an error stating that ' expected ';' before ' ja ' when I declare JsonDataAccess.

  Here is my code snippet:

  JsonDataAccess ja;
  QString response;
  If (response-> error() == QNetworkReply::NoError) {}
  const int available = response-> bytesAvailable();
  If (available > 0) {}
  answer = QString::fromUtf8 (response-> readAll());
  qDebug()< "tag="" name="" is="" ::=""><>
  QVariant jsonva = ja.loadFromBuffer (response);

  }

  even after the addition of the LIBS +=-lbbdata in the .pro file I get no success here.

  Help, please

  Concerning

  Don't forget to:

• Qosmio G40 - problem with the use of 100% of the CPU

  In recent weeks I have problem like describbed here: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=126670𞻎

  Almost the same thing - my computer starts and works ok, but from time to time is frozen by Symantec Service Framwork and all other descriptions are the same.

  "After having been inactive during these seconds, the cooling fan will start to operate at maximum power, creating a huge noise, that I never experienced before, not even while the CPU was operating at 100% for a while due to other programs." Force a reboot is all what I can do. »

  Almost all accidents that this question was by NIS2008, but also Vista explorer.exe and fingerprinttray service or the service of the Index process.

  I received a notice from the team of NIS that I get to use the new NIS09, and for sure that my machine is damaged - check it out here http://community.norton.com/norton/board/message?board.id=nis_feedback&message.id=6964&quer y.id = 22439 #M6964

  I called the Service, which has changed the ATV and CPU - I changed to NIS09 after, a few weeks was good, but now the problem back - in the last two weeks twice. (I observe that starts about 5 minutes after download of updates to NIS (I know cos NIS 09 indicator of that time).)

  One change - Vista is able to kill that process damaged (Admins have no right to do), starts the process of WeAreFault, which sends information on crash for MS - after about 15 min computer starts to work properly without reboot... so I think that a problem is somwhere on the line between Toshiba and Norton, cos repair also change in behaviour of the machine - is now using work not CPU around 20% - before was 50 to 70% and 100% of crash. Norton is also, but must for this.

  Does anyone have a conclusion?

  Generally, I don't like Norton because he needs as many resources and make the laptop lazy. On the net, you can find very good alternative applications.
  Have you tested how the laptop works after removing the NIS?

• Problems in the use of Ivi driver ke230y in 'IviDCPwr measure [MSR] .vi.

  Hi all

  I have a problem in using pilot IVI (ke230y) to control power electric keithley2303 with LABVIEW 2013.

  After I booted and config ke2303 well and executed for 'IviDCPwr .vi measure [MSR]', it multibordure errors. For the period of 15 seconds, and then reports errors that appear:

  The code (attached) when I test it with other food such as agilent66309d and keithley2306 (with ivi driver ke230x), it works well.

  I have no idea on this problem with power supply keithley2303, can you guys never encounter this problem and can answer for me to fix.

  Thank you for your reading and your help!

  Best wishes

  Phil

  
  

• Problems in the use of headset logitech A-00009, with windows vista

  When you insert A-00009 logitech headphones, unknown device message is fired upward. No driver is found. How can I solve this problem?

  Hello

  When you use Windows Vista, you can see when you first start your computer you will need to activate the automatic updates get the latest USB drivers. This is because the factory install Vista do not have the series after the launch of USB drivers updated. It is a sign of this if your computer asks a driver disc after you connect a Logitech USB Audio product.

  Refer to: http://logitech-en-amr.custhelp.com/app/answers/detail/a_id/2193/related/1

  To turn on automatic updates to Vista, please refer to http://windows.microsoft.com/en-US/windows-vista/Turn-automatic-updating-on-or-off

• Problem in the use of the JDE 4.7 NumericTextFilter.ALLOW_DECIMAL

  Hello

  I wrote the code for the decimal entry as

  public NumericTextFilter numFilter = new NumericTextFilter (NumericTextFilter.ALLOW_DECIMAL);

  private AutoTextEditField test = new AutoTextEditField ("","", 8, BasicEditField.NO_NEWLINE | ") Field.FIELD_HCENTER);

  test.setFilter (numFilter);

  Here's my problem while using the virtualKeyboard Strom I m not able to type '1' textpad and when I click 1 entry appears as "." (DECIMAL)

  and when I m tilt blackberry in landscape mode so I m get '1' and '. " at different place and I m able to type.

  is there some their in blackberry os. 4.7.0.75 for this their.

  can we know what is theirs.

  Respect,

  Neev

  This is a known bug in version 4.7. It is fixed in a future release - I believe in 4.7.0.86.

  The only work around is to rotate the phone to get the view of the landscape. The keyboard works properly in this view.

• Problem with the use of the external hard drive.

  I was using a disk external hard seagate to store pictures. All of a sudden, it wants me to format the drive. If I do this, will erase all my photos? Is anyway around that I wouldn't lose thousands of photos.

  On Sunday, August 3, 2014 20:49:55 + 0000, CEDGR1208 wrote:

  I was using a disk external hard seagate to store pictures. All of a sudden, it wants me to format the drive. If I do this, will erase all my photos? Is anyway around that I wouldn't lose thousands of photos.

  See Zigzag3143 answer you and I would add the following:

  If you have only one copy of all the files that are important to you,
  whether on an internal hard drive, external drive, or anywhere else, you
  are always in danger of losing. It is always possible that a hard
  car accident, near Thunderbolt, user error, virus, attack the same
  stolen computer, can result in the loss of everything on your drive.
  As it has often been said, it is not a question of whether you'll
  such a problem, but when.

  I hope you succeed to save your photos, but for the future, be
  of course, you always have a backup of these and any other
  important files on external media.