Problems of wow on installation of updates

Similar Questions

• update problem failure in the installation of updates to restore changes

  I use windows 8 unique language. Whenever I have install the update and try to restart my pc, when you set up the window, there is message 'Failure in the installation of updates to restore changes.'

  Help, please.

  Thank you.

  Hi Manish,

  This problem may occur if Windows updates are not getting not properly installed or damaged.

  I suggest you try the steps from the following link:

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

  Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after troubleshooting.

  
  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Having problems installing Dreamweaver. Installation of updates remains at 0% when I click the icon creative cloud on my computer.

  ?

  update by downloading the files directly and then apply them:

  CC updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html

  updates CC 2104: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

  updates CC 2015: http://prodesigntools.com/adobe-cc-2015-updates-links-windows.html

• When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. "Help, please.

  When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows
  Installation package. A program required for this install to complete could not be run. "Help, please.

  Hello..

  Try this support article > If you see an error message "Windows package install" when you try to uninstall iTunes from your PC

• I tried to update iTunes on Windows 10, now, I get the error "there is a problem with this Windows Installer Package".

  Hello

  I tried to update iTunes on Windows 10 and now I get the message error "there is a problem with this Windows Installer Package".
  I tried to fix it too, but it has not helped, so I uninstalled and tried to reinstall but there has not helped either. I tried almost everything I've seen in other posts.
  I use a laptop Asus series k55VJ with an original copy of Windows and has never had this problem before.

  Any of you have an idea what can do?
  Thank you!

  Try to repair the Apple Software Update of the programs and features Control Panel, then uninstall it and then reinstall iTunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• iTunes update errors with the following message appears: there is a problem with this Windows Installer package. A program run as part of the set up did not complete as expected.

  iTunes error update

  I am trying to install an update to iTunes on my laptop and find the folowing part-way through the installation error:

  "There is a problem with this Windows Installer package. A program run as part of the set up did not complete as expected. Contact your provider to support personal or package. »

  I got iTunes for 3-4 years now and have always been able to install updates successfully, so don't not sure what is the problem.

  I tried msconfig and changed the boot process, so it includes all of the non-Windows elements, as suggested on the Microsoft Web site, but that has not worked.

  Can anyone help?

  Thank you

  The instructions were to contact the vendor of the package. This isn't iTunes, Microsoft.

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• PROBLEM WITH THE INSTALLATION OF UPDATES

  When the computer tells me to reboot to complete the installation of updates, I do.  It stops normally, but when he tries to restart, the screen goes completely dark.  I have to press the market / stop button for 4 seconds & it stops.  I wait a few minutes start computer & it starts normally & then it finish installing updates.  My question is what could cause the problem?  I learned recently by Microsoft (office of answers) that there is a big possibility that I corrupted the registry files. She did a remote help on this laptop for a problem with the execution of any Microsoft fix it Solutions.

  I would like to know what else could be the cause of the problems and what I could try to fix it?

  CF. http://answers.microsoft.com/en-us/windows/forum/windows_vista-update/windows-updates-wont-install/9ae86061-ff1e-4996-b5a2-8918d01588ab (10 Dec-15)

• I have problems installation and update, get the error 641

  I have installation and update problems to continue to receive code 641 please help

  Hi ByrdyRidgley,

  Follow the troubleshooting steps in this thread with the same error code 641.

  Let us know if that helps.

• Problem installation of update KB2556532 on Windows Vista 32 bit - stops configuration stage 3 of 3

  original title; Problem installation of update KB2556532 on Windows Vista 32 bit

  I had problems for the last two months trying to install the update to windows KB2556532. I have Windows Vista 32 bit.

  I had a virus that has been cleaned of my laptop. It was windows recovery of fraud, and I don't know if this could have caused the problem at first, but after you have cleaned the virus always impossible to install this update.

  She always says that it has installed ok, but then when the computer has restarted, it is located in 'Configuring Updates step 3 of 3..' he said then that the update was not installed correctly and is back from changes.  Once the computer has booted I am prompted to install the update again.  It continues in this loop.

  Can anyone help me please with this.  I can't online solutions for this problem, I looked for a few weeks to try and fix myself.

  Unfortunately if this utility installs not it is not that there is something corrupt or prevent Windows to install correctly.

  At this point you can try to contact Microsoft through these channels: https://support.microsoft.com/oas/default.aspx?gprid=11732&st=1 to see if they can provide assistance.

• I can't download the new iTunes update, the error message say "is there a problem with this Windows Installer package."

  I can't download the new itunes update.  Error message says "there is a problem with this Windows Installer package.  A program required for this install to complete could not be run.  Contact your supplier of staff or the package of support ".
  I was running itunes perfectly well before trying to download this update.  ITunes is not yet available.
  Original title: update iTunes Application program compatibility

  Thanks for your help.  Unfortunately no idea worked.  Windows Installer 4.5 is not good for Windows 7.  However, I was able to restore my computer to an earlier date and the previous itunes was there.  It still would not allow me to access without security clearance, but I finally understood how to afford access - I am the administrator and the only user - go figure!
  Thanks again.

• I have real problems, installation and update of adobe programs on my mac (OSX 10.8.4)

  Here are the problems.

  Have the new Imac 27 "with 3 TB of fusion drive.

  Have CS6 LR etc, but having real problems, installation and update of program ADOBE EVERYTHING including Flash. CS6 it got to the point where I went through the Adobe representative on the online chat and we ended up having to put in place a new log-in which allowed in part but CS6 last updated has not been updated. I took my apple Mac which did a software and check HD and all is well!

  Now I signed CC Adobe for photoshop and I can't install Photoshop CC and get the following error message. This isn't what I expect from the combination of Apple and Adobe! Can pls someone advise.

  ERROR: DS001: impossible to mount the disk image Volumes/Adobe Photoshop CC/Adobe Photoshop CC/payloads/AdobePDFSettings10-mul/AdobePDFSettings10-mul.dmg. Please check that the disk image is not altered.

  Hi NinoRMann,

  The download seems to be incomplete, and that's why your Mac can not mount the image. Please try to download it again.

  Kind regards

  Abhijit

• Computer laptop Pavilion G6 with 8.1 window is stuck on the installation of updates

  Hi my old laptop Pavillion G6 of 12 months (which was the worst computer I've ever owned!) is stuck on an update. The screen shows the message "Keep your PC up to... this installation to update 1 of 2" for 12 hours (overnight).

  A little over 2 weeks ago he had a problem with the WiFi connection - which also seems to be associated with the Windows updates - I got this one and it has been fine since then. Started an automatic update last night and now he's stuck. Any ideas?

  Hi Jamame,

  Thanks for your post, I will do my best to help you!

  I see that your computer did an update for more than 12 hours and has not completed or seems to have improved.

  First of all you could cancel the update, restart the computer.  Then you would go The HP Support Assistant to search for updates or problems. Here is a document to help performance. Improve the performance of the system without adding memory (Windows 7). I would also like to launch the File Checker.  Using the File Checker system to restore the system files. Now repeat your update with her power.

  If you want more help, please can you give us the exact model of the G6 you and the operating system you are using. How can I find my model number or product number?

• There is a problem with this Windows Installer package. A program required for this install to complete could not be run Windows 10

  There is a problem with this Windows Installer package. A program required for this install to complete, could not be executed. This appears when trying to update

  Repair Apple Software Update of programs and features, Control Panel, and then try again.

  If not for general advice see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

  Hello!
  I have the problem with Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no preinstalled operating system.
  I do the following:

  1. install Windows 7 x 64 SP1.
  2 Installing the LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE & partNumber = PSK30E-02T002B3 & serialNumber = & USER_ACTION = Serial % 20number])
  3. install all updates of Microsoft Windows
  4. run the installer of the software Toshiba for Win 7 - it installs two drivers and then asks to restart.

  Here is the log for the first test (win7update.log) file:

  12\28\2011 update started at 21:11
  TVALZ_O.inf installed
  E/s installed & memory access driver
  driver_bluetooth_TC00241200A.exe/s/log/test has been installed with the result of the PASS code
  util_tvap_TC00215000H.exe/s/log/test /wait15 was installed with the result of the PASS code
  Updated at 21:29

  After the restart I've run it again and the result is:

  12\28\2011 update started at 21:38
  Toshiba Bluetooth stack has already been installed.
  Toshiba value added package has already been installed.
  Updated at 21:40

  Any help is appreciated!
  Thanks in advance!

  Stand by.
  What are you doing exactly?
  You try to install own OS?

• Error code: 0x800A0046 while windows update sites access & installation of updates... ?

  Error code: 0x800A0046 while windows update sites access & installation of updates... ? Regds, 'a journey of a thousand miles begins with a first step."

  "Resolution of the error code: 0x800A0046".

  To resolve this problem, follow these steps on the client computers. Step 1: Verify the DCOM security

  1. Click Start and run, type Dcomcnfg, and then click OK.
  2. Expand Component Services and then expand computers.
  3. Do right click my computer and then click Properties.
  4. Click the COM Security tab
  5. Under access permissions, click on change by default.
  6. Check that the following accounts are listed:

     On Microsoft Windows XP-based and Microsoft Windows Server 2003 clients

     The collapse of this Expand table this table

     Account name	Permission type	Permission
     Gites, administrators or a user who belongs to the Administrators group	Local access	Allow
     System	Local access	Allow

     On clients based on Microsoft Windows 2000

     The collapse of this Expand table this table

     Account name	Permission type	Permission
     Directors	Local access	Allow
     System	Local access	Allow

  7. If either of these accounts is missing in the access permission box, follow these steps:
     1. Click Add, click Advanced and then click locations.
     2. In the location box, click the Local_Computer_Name and then click OK.
     3. Click Find now.
     4. Press CTRL and click the required account names, and then click OK twice.
     5. In the group or user names box, click an account that you have added, click Local access in the permissions for box Account_Name and then click to select the check box in the column allow.
     6. Repeat step 7 for all accounts that you just added, and then click OK.
  Step 2: Check the DCOM default properties
  1. Click the default properties tab.
  2. Make sure that the following configuration:
     • The Enable Distributed COM on this computer check box is selected.
     • In the default authentication level box, the connection is selected.
     • In the default impersonation level box, the identification is selected.
  3. Make the necessary changes and then click OK.
  4. Restart the computer.

  Step 3: Verify that your user account is not a member of the guests group note this step applies only to computers that are running Windows Server 2003, Windows XP Professional, or Windows 2000 and that are not joined to a domain.

  1. Click Start, click settings, and then click Control Panel.
  2. Double-click Administrative Tools.
  3. Expand computer management, and then expand local users and groups.
  4. Click users.
  5. In the right pane, double-click the account that you used to log on the computer.
  6. Click on the Member tab of.
  7. Click guests, click on remove and then click OK.

  Step 4: Check the security descriptor in customers service updates automatic-based on Windows Server 2003 and Windows XP-based

  1. Click Start, run, type cmd, and then click OK.
  2. At the command prompt, type the following command and press ENTER to reset the security descriptor:
     SC tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)

     Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.

  Windows 2000-based clients

  1. Download the Subinacl utility. To do this, visit the following Microsoft Web site:
     http://www.Microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b & amp; amp; displaylang = in (http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b & amp; amp; DisplayLang = en)
  2. Double-click on the downloaded file and follow the instructions in the Windows Resource Kit Tools Setup Wizard. By default, the Subinacl utility is installed in the following directory:
     C:\Program Files\Windows Resource Kits\Tools
  3. Click Start, run, type cmd, and then click OK.
  4. At the command prompt, type cd C:\Program Files\Windows Resource Kits\Tools to move to the directory where the Subinacl utility has been installed.
  5. Type the following command and press ENTER:
     Subinacl/service wuauserv /sddl = D:(A;;) CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  1. Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.
  Step 5: Check the local security policy

  Notes

  • This step applies only to the Windows Server 2003-based, Windows 2000-based, or Windows XP Professional computers.
  • If your user account is in a domain, this security setting may be configured by a Group Policy object that is located on the network. Contact the network administrator, or see the following article for more information Microsoft Knowledge Base:
    810739 (http://support.microsoft.com/kb/810739/) white paper: Troubleshooting Group Policy in Windows 2000
  1. Click Start and run, type gpedit.msc, and then click OK.
  2. Expand Computer Configuration, expand Windows settings, expand Security settings, and then expand local policies.
  3. Click user rights assignment.
  4. In the right pane, double-click on impersonate a client after authentication.
  5. Verify that the Service accounts and directors are included.
  6. If the Service account or the Administrators account is missing, follow these steps to add the account:
     1. Click on add a user or group, click Advanced, and then click locations.
     2. In the location box, click Local_Computer_Name, and then click OK.
     3. Click Find now.
     4. Press CTRL and click the required account names, and then click OK three times.
  7. Restart the computer.

  Step 6: Enable the persistence of user data in Microsoft Internet Explorer

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.
  3. Click the Security tab, and then click Internet.
  4. Click on custom level.
  5. In the settings dialog box, scroll down to the Miscellaneous section.
  6. Under the Userdata persistence, click Activate.
  7. Click OK two times.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."