Problems running performance check

Similar Questions

• Problems running the check disk and disk defragmentation

  I tried to throw a disc defrgmentation and I ask rubbing a disk check I don't know how. I tried to go to the Run comand.com, which is written ' chchdsk/f' and tells me that it is a function of "read only". My system information, it says I have Service Pack 3. Help, please. Everything else works fine.

  When you run chkdsk /f in the command prompt window, you should see a message like this:
  The type of the file system is NTFS.
  Cannot lock the current drive.
  Chkdsk cannot run because the volume is in use by another process.  You want to schedule this volume to be
  checked on the next reboot of the system
  ? (Y/N)
  If you answer "Yes" by typing Y, chkdsk /f turns to the next boot XP (or he will try to run).
  When chkdsk runs automatically restart either because XP thinks he needs to (perhaps your NTFS volume has been marked as dirty) or you have chosen to do it yourself, the results appear in the viewing Application event log.  You should look there for the chkdsk log and no problems after running chkdsk.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run, and in the box enter (or copy and paste):

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  Look in the Application log for a recent event proposed Winlogon, and it should look like this:

  Event type: Information

  Event source: Winlogon

  Event category: no

  Event ID: 1001

  Date: 04/08/2010

  Time: 11:25:57

  Description:

  Checking file system on C:

  The type of the file system is NTFS.

  One of your disks needs to be checked for consistency. You

  may cancel the disk check, but it is strongly recommended

  that you continue.

  Windows will now check the disk.

  Cleaning of minor inconsistencies on the drive.

  CHKDSK checks Usn Journal...

  Audit of the USN Journal is complete.

  39070048 KB total disk space.

  28017948 KB in 100571 files.

  56540 Ko 10556 index.

  0 KB in bad sectors.

  236440 KB in use by the system.

  65536 KB occupied by the log file.

  10759120 KB available on disk.

  4 096 bytes in each allocation unit.

  9767512 total allocation on the drive units.

  2689780 allocation units available on disk.

  Windows has finished checking your disk.

  Please wait while your computer restarts.
  If your report has errors, you may need to run chkdsk /f again until the report indicates no error.  If you get errors, then your hard drive may be failing.
  If you want that take us a look at your report of chkdsk that you see in the event viewer, you can copy it to the Windows Clipboard and paste it back here like this:
  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis
  .  Remove personal information from your information
  After having stuck if you are forced to do so.
  If you paste an event, it will look something like this annoying system startup event:
  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer
  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.
  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• to solve the problems of performance (running slow SQL queries), which should be the systematic approach

  Hello

  I am new to oracle.  Need some advice on how we should approach to problems of performance especially for SQL queries running slow on the database.

  Thanks in advance.

  6e85b3c2-5f02-40CB-A8AD-d2279f63b4be wrote:

  Hello

  I am new to oracle.  Need some advice on how we should approach to problems of performance especially for SQL queries running slow on the database.

  Thanks in advance.

  Start here;  http://docs.Oracle.com/CD/E11882_01/server.112/e10822/TOC.htm

  Continue here: http://docs.oracle.com/cd/E11882_01/server.112/e41573/toc.htm

• Problem running the Zoo Tycoon 2: Ultimate Collection

  I just installed a fresh copy of Zoo Tycoon 2: Ultimate Collection on my laptop with windows 7 and can not enforce. Whenever I try to start the program (after waiting a few minutes) it comes up with the message-

  "Insert the Zoo Tycoon 2: ultimate collection disc 1 into your CD-ROM drive, select ok and restart application."

  I already have disk 1 in and I tried 2 other drives as well, but it still does not work. I have re-installed twice now and checked that my computer meets the requirements - what it does, but I still can't get it to work. Does anyone have any suggestions?

  Hello

  Generally you encounter this message if the installation of the game is not over and that you are trying to read. Uninstall the game completely from your system (programs and features) and then try to reinstall the game and see if the problem is resolved.

   

  Step 1:

  To uninstall the programs in the system, follow the steps mentioned below.

  a. click on Start menu and type programs and features in the start search box and press ENTER.

  b. Locate the program and right-click to uninstall the system.

  For more details, see the article mentioned below.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Step 2:

  Before installing the computer clean boot and then continue the installation. To put the computer in a clean boot follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 to start the computer in normal startup.

  The game is not compatible with Windows 7. Click on the link below.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=%20Zoo%20Tycoon%202%3A%20Ultimate%20Collection

   

  Step 3:

  I suggest you to install the game in compatibility mode and check. Follow the steps mentioned below.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  I suggest you to contact the game manufacturer for assistance on how to install the game on the system.

  http://www.Microsoft.com/games/PC/zootycomplete.aspx#support

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows cannot run disk checking on this volume, because it is write protected & Windows could not retrieve information about the disks on this computer

  I have Vista o/s & I am facing this problem. Please tell me the good soultion on it.

  Hi Sarang_982,

  ·         When exactly you get the error message you at startup of the computer or when you open any application or when you try to run chkdsk on his machine?

  I suggest that you put your computer in a clean boot state, and perform the steps below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You will need to disable automatic disk check, and then run the disk of the WINRE (Windows Recovery Environment) command prompt check and check if the c: drive error (there) get fixed.

  You try to run the audit from WINRE for drive C: disk drive and if it helps. Here are the steps to open the command prompt in Windows RE:

  Remove all floppy disks, CDs, and DVDs from your computer and restart your computer by using the power button on the computer.

  b. do one of the following:

  1. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you must try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  2. If your computer has more than one operating system, use the arrow keys to select the operating system you want to repair, and then press and hold F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select repair your computer and press ENTER. (If your computer is not listed as an option, then your computer doesn't understand no repair preinstalled recovery options, or your network administrator has disabled the.)

  d. Select a keyboard layout, and then click Next.

  e. in the System Recovery Options menu, click command prompt to open.

  f. Type "chkdsk/f" and enter.

  g. Type "chkdsk/r" entry.

  Check if the HARD drive is encrypted or not if yes then decrypt and see if it works well or not.

• problem running the software after installation

  I installed age of empires 2 on my laptop and when I tried to run, the aoe2 loading screen would come and then close after 50sec. I don't know what the problem is. I need help

  Hello

  1 - is your computer meets the requirements of the game?

  2. do you get any error code or error message?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try the steps outlined in the following link from Microsoft to solve the problems of the game performance and check.

  The problems of the game performance:

  http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems

  Method 2:

  Put the computer in a clean boot state, and then try to play the game and see if the problem still occurs. Using the boot, you can determine which third party game or an application is causing this issue.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Hope the information is useful.

• Problems of performance after a random amount of time

  Hello

  I'm hunting for a problem of performance for quite a while now and I would like to ask the community for tips.

  But first things first:

  We have installed ESXi 4.0.0 (219382) on a Dell PowerEdge R710 with an Intel Xeon processor [email protected] and 8 GB of RAM. A PERC 6 / i controller is configured in RAID 5 for storage. A variety of facilities of Fedora and Ubuntu (6.06, 8.04) are running as the guest systems.

  When starting a guest performance subjective experience is thin and use hdparm, we get reading disc, 35 to 60 MB/srates. However, after an indefinite period, the performance of the system goes down and hdparm reported rates of about 1 MB/sdisc. This happens on the guests at random and after random times. The only job here is to stop the prompt and start again (reset doesn't work here).

  I have already studied the documentation available as http://communities.vmware.com/docs/DOC-3930 and followed the recommendations, but I had no success so far. Don't check the performance of the ESXi host using the Client vSphere and esxtop, no load heavy on the queues of the processor or disk can be noticed. Comments file systems are not aligned, but I doubt that this would be the reason for such a success enormous performance.

  What takes me by surprise is the random time amounts. Enabling VT - x in the BIOS after installing ESXi would play a role here?

  I would appreciate any advice.

  Thank you

  Andreas

  But ESX needs memory for itself, approximately 1 GB, and there is memory above each guest (for example a guest of 1 GB has about 128 General fresh MB).  ESX will also try to keep some are free (in a 8 GB machine ESX will generally try to keep the use of the RAM to about 6.5 GB or less in my experience).

  These factors combined are why you see ball and swap figures.

  Your options are to reduce the RAM allocation or adding more physical RAM.  Another option in some cases is to move the files to a decent SSD vSwap.

  Please give points for any helpful answer.

• I have 22 SPSS for Mac.  Since I upgraded to El Capitan, I have a number of problems.  I checked the Web sites of IBM, but they only mention fixes for SPSS 23.  Any thoughts would be greatly appreciated.  Thank you.

  I have 22 SPSS for Mac.  Since I upgraded to El Capitan, I have a number of problems.  I checked the Web sites of IBM, but they only mention fixes for SPSS 23.  Any thoughts would be greatly appreciated.  Thank you.

  I am running SPSS 23.0

  You can upgrade to 23.0?

  Also, have you looked here

  http://www-933.IBM.com/support/fixcentral/SWG/selectFixes?parent=SPSS & Product = IB m / + Information Management / SPSS + statistical...

• If I do a full reformat on my Vista laptop, is what will solve the problem - "Windows cannot check for updates" error code 800FFFF? Frustrated!

  I have a laptop that I use mainly for cloud computing and travel.  I have much stored on the hard drive itself and I spent hours trying to solve the problem regarding
  
  Windows can't check for updates, error code 800FFFF.

  I tried some of the recommendations varied on this site, but so far without success.

  If I just wipe my computer, and then start reinstalling everything from below upwards, will that solve the problem?  I know it sounds drastic, but I'm willing to do, and hopefully learn something in the process.

  I'm not computer specific read and write... so it would take me hours, wading through all the different corrections before as I find one that works.  That's why I'm considering a reformat.

  I checked for malware and repeatedly tried to system update readiness tool.

  Any thoughts?

  Some information on my system:

  OS: Vista Edition Home Premium
  Version: 6.0.6002 Service Pack 2 Build 6002
  Model: Inspiron 1525
  System type: X 86-based PC
  Processor: Intel Core 2 DUO CPU
  The version of the BIOS/date: Dell Inc. A16, 16/10/2008
  SMBIOS Version 2.4

  Hello Jason.

  I suggest you try the following:
   
  close and exit all the open documents or windows program you have open.
   
  Open Internet Explorer (only!) go to http://support.microsoft.com/kb/923737 
  [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.
   
  Note => for best results, check the option to remove personal settings.
   
  NEXT
  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].
   
  1B. make disappear/close the pop-up window "automated troubleshooting! -then...
   
  c. 1, without taking into account any warnings similar, or '' not recommended '' run difficulty he 50202 in DEFAULT mode (if on a race later you still have the same failure, then repeat the above & select aggressive mode).

  2. closing of the session and restart the cool system & then run manually check the updates in Windows Update, etc, etc...
  When you get to Windows Update, a custom scan updates. Take (accept) those marked critical or Important.
   
  If it has updates Silverlight or Net Framework, select not them and leave it for one pass later.
  Those that are marked as "optional" decline.
   
  Have infinite patience so that it scans and it's work.
   
  When you are prompted to restart Windows, please do. Allow it to restart.

  If you still have a failure and you just did a Fix - IT in the default mode, date back to 1 a/1 c and now this time make the default mode AND aggressive mode (both) and retry Windows Update again

  Note: Running aggressive mode difficulty he 50202 will result in a loss of the history of the update but will not affect the actual installed updates.

• Computer runs continuously check disk and automatically goes into power saving mode.

  2 days ago my computer was working fine, then yesterday he wanted to run the check disk at startup upward. Finished, he found no errors and proceeded to vista loading which then stated that he was going to power saving mode, the screen went black and clear screen turned yellow. Now he wants to run the check disk on every restart and ends with her past in power saving mode. I've only got 1 successful start since this all started. I tried to start in safe mode but it freezes. I also tried to boot to the last known configuration but that only prompted an another disk check and ended just as vain as other attempts. The hard drive is only a year so it should not be failing already. I don't know what I should try. Any help would be greatly appreciated. Thank you!

  Hello

  1. have you made changes on the computer recently?

  2. What is the brand and model of the computer?

  Method 1.

  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.

  The correct way to disable CHKDSK to start use the on command chkntfs /x switch in command prompt. The /x switch will exclude a verification by default startup car. If you have drive C: as your hard drive, then the command to disable chkdsk C: drive analysis would be:

  chkntfs /x c:

  If you have 2 drives C and D, you can disable chkdsk with the command below

  chkntfs /x c: d:

  So go ahead and restart.

   

  Method 2. 

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Here are the steps to disable checkdisk at startup.

  1 - click on the 'Start' menu of Windows on the desktop and click on "Search" (Windows Vista or 7).

  2. Type "regedit" in the search box and press 'Enter' to start recording.

  3 - Click on '+' in the folder 'HKEY_LOCAL_MACHINE' to develop. Click on the 'SYSTEM' folder and click on the folder "CurrentControlSet". Click on the 'Control' folder and then click on the "Session Manager" folder.

  4 double click on 'BootExecute' on the right pane. You should see the default value of the key defined as autocheck autochk * (with asterisk). The asterisk (*) means that the Windows controls every drive for consistency. Add "/ K:C" at the end of the autocheck autochk * after the addition, the final value should look like this: autocheck autochk / k: C *.

  5 - Click on "file" and click "Exit" to close the damper. Restart your computer. The disk check is no longer lance to the computer startup.

  Method 3.

  After the checkdisk has been disabled, I suggest you to reset the power to the control panel settings and check if that helps.

  Solve power problems: http://Windows.Microsoft.com/en-za/Windows-Vista/troubleshoot-power-problems

  Change, create, or delete a power plan (scheme): http://windows.microsoft.com/en-us/windows-vista/Change-create-or-delete-a-power-plan-scheme

  I hope this helps.

• Unable to run the check disk due to having to restore the system

  When you start the system, it shows that disk needs the consistency check, but then it shows that the drive can be controlled due to the recent installation so system restore first. Although, when you try to restore the system, it is said there are disk errors that should check and may need repair in which it said restart your computer for this. When the computer is retsarted, it shows that the drive needs verification but still, says system needs to restore. So I can't run a check disk or restore the system. Help, please!

  Hi mustakimahmed,

  Welcome to the Microsoft Community and thanks for posting the question. Looks like you are not able to start from desktop due to errors in the disk check and not able to perform the system restore too.

  Try these methods and check:

  Method 1: Run the check disk in windows recovery (winre) mode. Follow these steps:

  (a) open command prompt.

  (b) use the following procedures:

  To repair errors, locate bad sectors and recover readable information, at the command prompt, type chkdsk volume: / r, and then press ENTER.

  Note: If one or more files on the hard disk are open, you will receive the following message is displayed: cannot run Chkdsk because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

  Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  Method 2:

  If method 1 fails, because you are not able to perform the disk, or restoring the system check, you may need to contact the manufacturer of the hard drive to get help. As the drive that you are using may be corrupted.

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• problem running the session of remote debugging for specific oracle sql developer

  I have a problem running the session of remote debugging of sql server specific oracle developer.
  I get the following error:
  Connection to the database mmgrep - INNA.
  PL/SQL execution: ALTER SESSION SET PLSQL_DEBUG = TRUE
  Running PL/SQL: CALL the DBMS_DEBUG_JDWP. CONNECT_TCP ('inna.followap.com', '4029')
  ORA-30683: failure connecting to debugger
  ORA-12535: TNS:operation expired
  ORA-06512: at "SYS." DBMS_DEBUG_JDWP', line 68
  ORA-06512: at line 1
  Process is complete.
  
  
  I understand that Oracle is unable to connect to my PC.
  I have 2 different oracle servers to work with the sql developer. With one I can run debugger, with another - the errow above.
  I need to change to be able to start debugging with second oracle server.

  In tools | Preferences | ebugger, you can specify a range of ports for the debugger to use so you can limit it to those that are open on the firewall.

  And just to check, is the ip address that is displayed in the CONNECT_TCP call the right one for your PC?

• There seems to be a display problem. Please check that your monitor is HDCP and is not mirrored by using Airplay.

  There seems to be a display problem. Please check that your monitor is HDCP and is not mirrored by using Airplay.

  Apparently, you're trying to use AirPlay to display content that is protected in a way that not only allows the copy.

• After the upgrade to Vista, installation began the performance check and my computer died

  I installed windows Vista today an update to XP and everything was going well until the installation began the performance check. This is when my computer died. Won't start at all. Can anyone help?

  Dell XPS 400

  Original title: fried my computer Vista

  Do not open the power supply!   Word or warning.  Usually, when similar light blinking, it is feeding.

• I have compaq with Vista system > & have a problem running in normal mode, the screen is blank

  I have a Compaq laptop with Vista operating system. Since yesterday, whenever I try to start the window of the screen after that some time is empty and only the cursor shows. But the system only works when I press ctrl + alt + delete the display shows various options. However under safe mode I can use the laptop including the Internet, etc.

  How to get back to normal

  Hey Suman,

  Follow these steps below:

  Perform a clean boot according to the link below:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 to add the computer to his usual way

  Reply back with the results