Problems to make SDL to work

Similar Questions

• HP deskjet all-in-one 3632: problems to make eprint to work

  OK, I'm having a problem making the printer to connect to the internet.

  I have a static IP address on my ISP.   I have 1 n600 Router 2 broadcasting networks.  1 5 g and 2 1. 4 g.   I used void net default 192.168.1.1 and 255.255.255.0.   This router I have a win 7 64 home computer hard wired. I also have a hard wired my Office Access point. the access point also broadcast a GIS of different 2.4 g.  all the sig.s wireless use wap2 Protocol and b/g catch up mode. and the names of all different but same network total network, if that makes sense.  OK, I have a total of 4 more also attached computer too either or network win7 32 ultimate win 7 64 and win vista 32. 2 tablets and 3 IH smrt 5.01 lolipop android running.  I have 2 security cams that have a static for IP and port forwarding on them.  everything works fine.  all computers are part of the same private network hmegroup.  I assigned a static ip address for printer dhcp table.  I can print from any device at any time via wifi.  NOW HERE'S THE PROBLEM.  whenever I go to the WEB form, he is saying that its not active all the check boxes and I don't know what a proxy server is but I know that I have not installed on this network so I click No proxy server.  The PRINTER SAYS UNABLE to CONNECT to the INTERNET.  every time that I tried about 20 this weekend.  It says to check the dns, gateway, blah blah blah.  so the DNS are correct and it shows not 192.168.1.1 as the gateway.  He also btw autodetected it correctly.  so when it fails to connect, I click on web print report. I get the page "get the most out of your printer.  and then a white page. and that's all.  at the top of the page to "get the most out of your printer" it says in "BOLD", "your printer is not connected to a network" which is BS do see on every device and every computer wireless or hard-wire. and I open it a new browser window using 192.168.1.143 which is the static ip address for this printer and bam. It opens right.

  When have I forgotten?  can I configure the gateway as the ip of the real gateway side the ISP of my router.   Im a little aggravated because the only reason why I got this printer from walmart that the PHN android already had the makings of plugin hp on them and I don't like HP is cause of all the fluff sofware that comes with them.  I almost had a gun, but they seem fragile and plasticy more than this one does.  so as I said work is expected for printing on the web.  I tried to press the eprint button and it flashes a little and nothing. I pressed it and the 'i' button and nothing ever prints other than the above page.  I have reset to the default values and done everything as configuration 2 x.

  If anyone can help, I would be very happy.

  facorbin

  Hey @Facorbin,

  Welcome to the Forum from HP Support.

  I see that you are unable to activate the webservices in the all-in-one printer HP Deskjet 3632. I want to help you with this. I have some suggestions that might help.

  I recommend you try the following steps:

  • Enter the IP address in a web browser , and press Enter to go directly to this page. This should take you to your built-in Web server (EWS) printer.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.
  • Note that menu above EWS items can vary in overall models of printers. If you do not see the exact topics that I've listed here, the subtopic you should always appear on the Networking tab.

  If this goes through successfully, try to activate the web services () again. If you're still coming up short after this point, I recommend you enable DMZ mode in EWS your router, manually add the IP address of your printer. (Based on the level of detail, I suppose you're a statement you know what that means). After completing this step try to enable Web services one last time. Success?

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem and that you liked this post, feel free to express your thanks by clicking the "Thumbs Up" icon below by clicking on "Accept as Solution" (this will help others find the solution).

  Thanks for posting in the Forum from HP Support.

  Have a great day!

• Could not open windows live Director files/projects error: Windows Live Movie Maker has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program...

  Original title: Windows Live Movie Maker

  Hello! I have a problem with windows live movie maker. I had been using windows live movie maker before and was able to make several projects already.  But recently I could no longer open my files and the following messages keep appearing on: "Windows Live Movie Maker has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available.  I downloaded the Windows Live Movie Maker program several times, but it does not work.  Does this mean I can have deleted a file/program to do work and recover all the projects I've done?  I remembered that once, I was removing a "Windows Live" in the program folder files because I wasn't happy with the Windows Live Messenger, kept popping up, which was not able to use, so I removed it from the list. Help, please!

  Hello

  The question you have posted is related to windows live movie maker and would be better suited to the community of windows live. Please visit the link below to find a community that will provide the support you want.

  http://windowslivehelp.com/product.aspx?ProductID=5

• Re: Satellite A300 - how can I make the webcam work on Win7

  Hello everyone.

  I had Win Vista installed on this Satellite A300 and it worked well.
  I had no problem at all.

  Then I moved to Win7 and now I'm going through the test of the work of webcam.
  I tried to install all types of drivers, even those for A500, but it would be of no use.

  So, how can I make the webcam work on my A300?

  I've tried everything, even the installation of Ubuntu on this laptop and still it wouldn't work. If this is your interest, I'm under Win7 in Spanish, x 32, Home Edition.

  I really need your help here, please, I beg you, I spent 5 days ago almost try ANYTHING!
  And yet, I get the message after each installation/reboot of the: "the camara web esta disabled o ha Fall.» "Por favor, it check las web camara su configs", which would result in something like "the webcam is disabled or it has failed. Please check the configuration of your webcam. I've been browsing the forum for related issues, but I have not found any solution :(

  Thanks in advance,

  Ozma.

  Hello

  Seems the webcam software has not been installed correctly.
  That Win 7 OS do you use? 32-bit or 64-bit?

  Here you can find Chicony webcam driver for Win 7 64 bit
  http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20091026100013.zip

  and here you can find Chicony webcam driver for Win 7 32 bit
  http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20091023184836.zip

  Good luck

• My Movie Maker is not working. I get an error every time.

  When I try to move a film or work in movie maker it freezes. The only change is that my computer is indicating that the mp2plugin.dll is missing. who does it affect? How can I fix it?  I tried to reload Director, but still does not work it is not allowing me to fix my Director.

  Hi cekf,

  Welcome to Microsoft answers forums!

  a. What is the exact error message that you receive?

  b. When you get the error message mp2plugin.dll is missing?

  This behavior can occur if an incompatible video filter is installed on the computer.

  Step 1: To resolve this problem, start Movie Maker in safe mode, and then configure Movie Maker so that the incompatible video filter is not loaded.

  Follow the steps mentioned in the link below.

  Error message when you try to start Windows Movie Maker in Windows Vista: "Movie Maker has stopped working".

  http://support.Microsoft.com/kb/923122

  Step 2: Search for the error messages.

  In Vista: Open the start menu. Click on all programs. Select "Maintenance". Select ""problems reports and Solutions ". " Click on "view problem history. Looking for the crash and error in question. Double-click the report in question. What is the data? (You can use "Copy to Clipboard" easily include this data in your message).

  Step 3: re - register the files related to windows movie maker to do this, follow the steps below.

  a. Click Start and in the start search bar type cmd, do a right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. at the command prompt type regsvr32 wmp.dll , and then press ENTER.

  Type regsvr32 jscript.dll and then tap on enter

  Type regsvr32 vbscript.dll , and then press enter

  Restart the computer and check if the problem is resolved.

  The most reliable formats to use in windows movie maker are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wmv, wav

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Live Movie Maker has stopped working

  Windows live Movie Maker suddenly stopped working.  I used it very well, and a week later, it will not open.  I checked the updates, solutions to problems, etc nothing works.  Nothing has been changed or updated to date between the last use and when it does not open.

  It might be worth a try to do a system restore
  at a time when Movie Maker was still working.

  Windows Vista - system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  I was wondering... Vista Movie Maker 6 yet will launch?
  If it will be... open and go to... Tools / Options / Compatibility
  tab, and uncheck all filters / OK. Now reopen Windows
  Live Movie Maker and let me know if it makes a difference.

• Windows Movie Maker has stopped working and will not save

  I used Movie Maker for some videos and they all worked without any problems. This one I edited without any problems, but when I go to save it I get an error message that says that "windows live movie maker has stopped working". My film is not as long, only four minutes, and it has music, a .wav file and text. My video files are AVCHD.  I tried to remove the text and music, but it does not export again. I also tried a clean boot, but that doesn't work anymore.

  Signature of the problem
  APPCRASH
  MovieMaker.exe
  15.4.3555.308
  4f596bb7
  igdum32.dll
  8.15.10.2342

  Hello

  The application is creashing done igdumd32.dll, let's run the System File Checker tool.

  Method 1:
  

  This tool will try to replace the missing or damaged system files.

  To do this, please visit this link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  If the problem persists, we will try to fix the Movie Maker application. See method 2.

  
  

  Method 2: we will try to fix Windows Live Movie Maker application.

  
  

  a.      click Start

  b. go to the Control Panel

  c. click uninstall a program

  d.      Double click on Windows Live Essentials

  e. Select repair Windows Live Movie Maker.

  If the problem persists, you can ask your question in the Windows Live Forum.

  http://answers.Microsoft.com/en-us/windowslive

  I hope this helps.

• Windows Live Movie Maker has stopped working. Help!

  Hello.  I'm working on a brand new supplied with windows 7 installed laptop.  Windows Movie Maker Live does not (never worked).  I tried uninstalling and reinstalling, but no luck.  Any suggestions?  Thank you!

  Windows Live Movie Maker has stopped working.

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: MovieMaker.Exe
  Application version: 14.0.8091.730
  Application timestamp: 4a72982a
  Fault Module name: MovieMaker.Exe
  Fault Module Version: 14.0.8091.730
  Timestamp of Module error: 4a72982a
  Exception code: c0000005
  Exception offset: 000D 4764
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\System32\en-US\erofflps.txt

  OK, I'll try to uninstall / reinstall again (did not the first time), but when I went in the box to add / remove programs again once, I noticed the option repair, so I tried instead.  It worked!

• Message "Windows movie maker has stopped working".

  Original title: Windows Movie Maker

  When you use Windows Movie Maker - the application generates the error message "Windows movie maker has stopped working" and close.  What happened several times.  What can I do to prevent this?  I use Windows 7 and Movie Maker 2011.

  Not sure, but have you tried to reinstall WLMM, or perhaps fix?

  See - http://support.microsoft.com/kb/938275/en-gb and try the repair option first.

  Also, make sure that your graphics card and your PC sound card drivers are up to date. Go to the manufacturers technical support for your PC brand and model site and see if there are newer drivers supported. If there is, and the repair does not help, try them. Make a restore point on your PC first, and if you like you should be able to "roll back" to your existing installation if you need to.

  You can also try a SFC/scannow to see if that detects and repairs problems of any OS if the above does not help.

• Error when you try to start the Medal of Honor Allied Assault: a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available.

  Medal of honor allied assault has stopped working?

  This message seems to me when I start the Medal of honor Allied:

  (a problem caused blocking the program works correctly windows will close the program and notify you if a solution is available)

  Hello

  ·         How long have you been experiencing this problem?

  You can reduce hardware acceleration and check if the problem persists:

  1. right click on the desktop and choose personalize.

  2. click on display settings.

  3. in the display settings window, click on advanced settings.

  4. display the Troubleshooting tab.

  5. click on change settings.

  6 reduce hardware acceleration.

  Also try the procedure from the following link: http://windows.microsoft.com/en-US/windows7/Fixing-game-performance-problems

  Also try to check if the game works the clean boot: http://support.microsoft.com/kb/929135

  NOTE: make sure that you start the computer in normal mode after troubleshooting is done

  You can also post your questions on: http://support.ea.com/

• How can I make Acrobat XI work with office 2016?

  Is there a way to make Acrobat XI work with office 2016? Acrobat upgrade at a significant cost to make it compatible with the latest version of Office starts at % $# @! me off.

  . . . JBrush

  Hello

  Acrobat XI is not a compatible Office 2016.

  You may experience some problems.

  Please take a look on the following document.

  PDFMaker applications, Adobe Acrobat and compatible web browsers

  Concerning

  Sukrit diallo

• Best way to make my SSD works again with a single partition

  There are 2.5 years, I replaced the original on my computer with a SSD hard drive. Months after I installed the beta version of Yosemite, the latest operating system for Mac at the time. To do this, the system created a partition on my drive, in which he has installed the beta version of Yosemite.

  I have today on the same partition, I installed Yosemite, Sierra macOS running. In the other, I have all files, so I want to eliminate. However, when I try to do this by using the disk on my Mac utility, it is not possible; I get a message that says I can't delete the first volume of the disc. When I try to increase the size of the partition on which macOS Sierra operates, so reduced the size of the other, the system won't let me.

  I would like to know what is the best way to make my SSD works with only one partition.

  You cannot delete the last partition that was created, that not 1.

  You can clone the content from the 2nd to the 1st, then you can remove the 2nd.

• Problem with catalyst 12.8 working set memory?

  I run a system Win7 Ultimate x 64 with dual ATI HD5870s inside. After update Catalyst 12.8 today, I noticed a problem with the memory what work has been used by Firefox 14.0.1.

  IS REPRO STEPS
  (1) run Firefox
  (2) open Taskman, sort of working set
  3) http://www.kotaku.com
  (4) use mousewheel to scroll the pane to the right down - load the additional articles for review.

  If you scroll down a bit, you should see Firefox eat a few GB of working set memory in short order. The page starts answers incorrectly at the time and Firefox becomes unstable.

  Note: This problem only repros when Crossfire is enabled. Crossfire is off, there is no problem at all.

  I don't know if it's a v Crossfire Firefox thing, or something new, sent by 12.8 catalyst... but whatever it is, keep your eyes open. I don't have a way to solve this problem yet apart from the stop of Crossfire, which denies the reason why I went with a double solution map in the first place.

  Deactivation of Firefox > Options > advanced > General > browsing > use hardware acceleration when available solves the problem until Mozilla and AMD solve this problem

• I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  Probably there is debris and dust in the decision-making of the lightning.  Serve with compressed gas canned (NEVER orally).  If this doesn't help, try electronic contact cleaner has a q - Tip.  Finally, take it to Apple.

• receive a problem caused windows to stop working, will notify you if a solution is found. Display driver igfx has stopped.

  the computer, ups and stops working...

  on a number of occasions, I get a blue screen with a print so small, that I can't read. Receive message a problem caused windows to stop working, will advise if a solution is found. Display messages to receive driver igfx has stopped working.

  You should look at the web site of the manufacturer of your video card or monitor to see if they have updated drivers.