problems to make the sound of a VOB file in the first

Similar Questions

• problem to install the first pro cs6, I have 32-bit Setup

  problem to install the first pro cs6, I have a 32-bit Setup

  Hi alicia220912,

  64-bit support is required to install the first Pro CS6. You won't be able to install it on the 32-bit computer because it does not meet the minimum requirements of the system.

  Please check the minimum system requirements at: http://www.adobe.com/in/products/premiere/tech-specs.html

• To make the first page of the file as a hyperlink using the framemaker API

  How can I make the first page of the file as a hyperlink using the framemaker API?

  This should make the entire page as clickable to open the link on the pdf creation.

  Thank you

  ASHA Rayakar

  Hi Asha,

  If you have managed to make a hypertext link at all, you are on the right track. From your description, it appears you are trying to use an existing text frame to place your marker of hypertext, a block of text that already contains text. If you put a hypertext marker in a paragraph with text, in fact, the only area that is clickable will be this paragraph. There is nothing you can do about it... This is the main behavior of FrameMaker.

  If you put a hypertext marker in a block of text that contains zero text (not even a single space), by default FrameMaker making this whole image map area. So if you try to make a whole page clickable, you will draw a new block of text that covers the entire page and insert the marker of hypertext, without text. You can experiment with this manually in the GUI.

  In your code, you must use the credentials of the members tr.beg.objId and tr.end.objid FO_Pgf. Looks like you might be using variable ID which is incorrect. If you do not have an ID of the variable, you can find the location/range of corresponding text including the FP_TextRange property. This will return the good ID FO_Pgf you need.

  If you are looking for the text block that contains a variable, you can use something like:

  F_TextRangeT tr;

  F_ObjHandleT textFrameId;

  TR = F_ApiGetTextRange (docId, varId, FP_TextRange);

  textFrameId = F_ApiGetId (docId, tr.beg.objId, FP_InTextFrame);

  This help at all?

  Russ

• How to make the first letter in a capitalized text field

  Is it possible for me to make the first letter of a capital of field if the user forgets to make capital? For example, in my form there is a field for the first name. I would like to enter into some type of Java script, so when the user off the field and the first letter tabs is not crucial, it will make capital. If I don't have to use Java Script, that will be fine too.

  Hello

  If it's just a word value, you can use this in the event exist;

  this.rawValue

  = util.printx (">?")<>

  This changes the first character (represented by the?) uppercase (represented by the >) and all the characters of tail (represented by the *) lowercase (represented by the)<>

  If you wanted something more general... If they could also enter a middle name, then you can call a function such as;

  function

  toTitleCase (textValue)

  {

  return

  () textValue.toLowerCase replace (/ \b [a - z] / g, function replace (match) {return match.toUpperCase () ;});})

  }

  This example uses a regular expression to change all lowercase letters, following a word uppercase boundary.

  Bruce

• Problems to make the access rule for a NAT device work

  I am new to Cisco routers so light easy on me.

  Our company has just purchased a RV042G so that we can start using VPN for some of our sales representatives.  There is always a need to access the RDC to configure our WAN1 port access rule to the internal server.  However, it does not work.

  I have install this type of rule on Sonicwalls before, but I don't have much experience with Cisco.  I'm a bit confused as to why it doesn't work anymore.  Any advice would be great.

  Service = DRC (3389)

  Source port = WAN1

  Source IP = our static IP address

  Destination IP = 192.168.0.250.

  What I am doing wrong?

  Hello Eric,

  Looks like you got the first step made so fare. How access lists works on this devices is actually just control/allow certain traffic but does not in fact of NAT/port forwarding. What you need to do is then go into the setup and go under transfer. Next, you will create your port forwarding it. You click on service management again to set up which port you must sent (it may be already there for when you have configured your access list). Some of them should be similar on how you implemented in the access list, but if you want more information let me know and I can give more details.

  Hope that helps out.

  Thank you
  Clayton Sill

• ISE 1.1.3 problem commissioning of the first connection to DOT1x

  Hi all

  I wonder how a wired client dot1x can get downloaded NAC its first connection to the ISE agent?

  The Agent must be installed before the first connection?

  I'have configure ISE 1.1.3 for the supply (files have been downloaded from the website of cisco) (mandatory update)

  I have an AuthZ rule for an evaluation of the correct posture

  and

  another rule AuthZ for assessment of unknown posture that triggers a rehabilitation of posture (download file)

  (in that order)

  NAC agent is properly configured (FQDN...), gets users and nothing happen!

  No upgrades NAC

  no assessment of the NAC.

  Any idea?

  It takes a while for the new agent to download?

  Best regards.

  C.

  To address the problem of the NAC agent, we need to check things.like couples

  1.) sure that the host address discovery on Mac OS X or Cisco NAC agent pointing the domain FULL of Cisco ISE name. (Right-click on the icon of the NAC agent,

  Click Properties and check the host of discovery).

  (2.) to ensure that the access switch allows communication between Cisco ISE Switzerland and the client machine end. limited access ACL applied for the session should allow the Swiss ports:

  permit tcp any host 80.0.80.2 eq 8905--> is for posture

  communication between the NAC and ISE (ports of Swiss) officer

  allow udp any host 80.0.80.2 eq 8905--> is for posture

  communication between the NAC and ISE (ports of Swiss) officer

  refuse an entire ip

  (3.) if the connection agent dialog box still does not appear, it could be a certificate problem. Make sure that the certificate that is used for communication Switzerland on the final customer is in the ISE Cisco certificate trust list.

  4.) make sure that the default gateway is accessible from the client machine.

  According to the guidelines of your confirmation, I close the case for this specific survey. We strive to provide you with excellent service. Please do not hesitate to reach out the hand to me or any member of the team of BAG if we can be of further assistance or if you have other questions related to the future. We appreciate your comments and look forward to serve you to make progress.

• How do I make my modified project. VOB files?

  I have DVDs that were made in the trade of my own family 8 mm films and I edited the. VOB's with Adobe Premiere elements 11. The modified project is on the time line and I added a background music for silent films of 8mm. The whole project is in. VOB files. When I try to make the project, pressing enter simply starts the project playing, but Adobe Premiere elements 11 does not make the project. There is no coloured line above the work area. The files are VTS_01_1.VOB.  I can't Windows Media Player to burn the project to a DVD so I can send copies to my family. How can I burn the project to a DVD that will play in a normal DVD player for my family? It will be necessary to make the project? If Yes, how should I do that? If I buy Adobe Creative Cloud there's going to be something that will help me get my project engraved on a DVD? Thank you.

  Romano, which I repeat what I said in my post, "How can I burn the project to a DVD that will play in a normal DVD player for my family? I did ask on the preview of the project. I said by pressing the "enter" button starts the playback of the project, and it plays very well and normally previews. My question was how to get the project which is in. Engraved on a DVD VOB files. I never asked how to 'fix' the video it's your verbiage. First elements 11 will not burn my project to DVD in the usual way. I want to know how to burn this project on a DVD that will play in a normal DVD player. I have the edited project as I want, I can't it engraved on a DVD, so I can share it with my family. I also asked if the creative cloud was something that could help me get my project burned to DVD.

• make the first line of each paragraph "BOLD"

  Hi all

  I read this forum, but I can't really find the answer, I need.

  Here's my problem, we intend to automate the flow of text in our Organization, that's what I have to do

  -read the input from the story of a database

  -flow text into a text box in particular for example 4.5 cm wide

  -each paragraph will be had 2 new lines

  -Select the first line of each paragraph then putting in bold.

  in the above list, I can do everything except the first paragraph selection and putting in bold. I am looking for the selection of text I see there is a function called textframe.select?

  Can someone help me with this please?

  This severely reduced your options. (Which reminds me, you can specify a detail important like that from the beginning the next time.)

  The simple solution would be to apply your "BOLD" font (or better: a character style) in the first line of each paragraph by using the property of a paragraph .lines. UH customary ‑‑ link to the HTML version of the omitted OMV, it seems I'm not coming back as much as CS2... (Is there a CHM for it to http://www.jongware.com/idjshelp.html).

  This should work:

  App.Selection [0] .paragraphs [0]. Lines [0] .appliedCharacterStyle = "YourBoldCharStyle";

  ... With your cursor in the paragraph you want to change. Will adjust to meet your specific needs.

  There is a drawback of the simple method. Unless you use a special police who makes bold with the same width as her (quite rare) usually, the text will be redistributed after he applied. So there are one or more words in bold on the next line, so you must remove the tank style "BOLD" of those. But! At that time InDesign may determine that these non-bold words may go back on the first line!

  Well written code does not help, because it could be possible the same word oscillates backwards with each change between the first and the second line, each time to cheat... At * some * point you'll have to help the poor ID a bit; perhaps to fix this first line with No Break applied.

• Make the first left ucase

  I have disorder support ticket program that users will type their problems in a supplied domain and we send the question. We have an interface that lists the questions... (now, that's of course all cosmetic) sometimes the user starts with one tiny question. is there a way to take this first letter and replace it with ucase? I tried a lot of different things, but they all fail. the only thing that I think now is to take the left 1 letter and ucase, exit, then take the left most letter in another exit and drop it and the rest of the output. There must be a better way.
  

  UCase (Left(yourvar,1)) gives you the first letter uppercase
  LCase (mid (yourvar, 2, len (yourvar)-1)) give you the rest lowercase

  If you are unsure how to concatonate, it would be a good time to learn.

• Is there a way to make the first Firefox tab a tab permanent, white fixed?

  I would prefer, as the title suggests, to have my first Firefox tab to be a fixed permanent blank tab. In other words, he would never take the address of the first site I type or click on in the field address, but would act as tab "an anchor."
  Is this possible?

  You can set the pref browser.tabs.closeWindowWithLastTab false on the topic: config page to prevent the closure of the last tab to close this window and display a close button if only one tab is open.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• How to make the first page next page element value

  Hi all
  
  I have two pages namely a contact page and another page to enter the connection details
  
  The first "CONTACT" page contains the name and other details and e-mail, in the second page, I have a page named login element and I need to provide the email address that I have provided in the first page.
  
  I tried giving in the connection point as & P1_EMAIL source and I didn't clear any cache, but I don't have the email address.
  
  
  Thanks and greetings
  Srikkanth.M

  Hello

  Page element

  Type of source: Element (name of the application or page element)
  Source of value or an expression: P1_EMAIL

  Kind regards

  Patel Kartik
  ------------------------------------------------------------------------
  http://patelkartik.blogspot.com/
  http://Apex.Oracle.com/pls/Apex/f?p=9904351712:1

• Are there specific codecs or import libraries that will make the first 6 use several types of files?

  Are there specific codecs or import libraries that will allow the first 6 import file types more?  I use 6 first on Windows 7.

  It seems that the only type of file which can be imported in this first release are certain types of AVI files... even certain types of notice will import but then will not appear when it is not placed in the timeline... no MPGs, MP4s, and WMVs, or something else will import at all.

  Virtually all the files I need to bring for first 6 must be converted into AVI with H.264 codec first.

  Any help would be useful.

  Digi

  I'm afraid not.

  Even if you were abel to import the first is not designed to handle these files.

• problems to make the internet connection on computer starts

  That's my problem... I turn on my laptop, no internet, I have to click on the Start button go to administrative tools, open services find wirless zero configuration and turn it on. then close all windows. I go to the blue toolbar at the bottom of the screen and then click the only Wi - Fi computer, open it, find the check box "use windows to configure the network settings" click this box close this window. Then, I have internet. Anyone know what is happening?

  Hi jmsmom2007,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. have you anythird party network or Wireless Manager software installed on the computer?

  If you have any third-party network or Manager software installed on the computer wireless, I would say that you uninstall and check if the problem persists.

  If you don't have such software installed then I would suggest that you perform the clean boot procedure and check if it works.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Also, make sure that the wireless zero configuration service is enabled when you follow the steps in the clean boot procedure.

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems to make the request to the media to work

  HI, having problems with a media query - part text on my page is too great on a smartphone screen.  I would like to reduce it and have used the following in my css, but its no do not influence:

  @media only screen and (max-width: 767px) {}

  {#primarywide}

  font size: 50%;

  }

  }

  You can see what's wrong with it?  The page is the home of Lene Lovich at Stereo Society

  The part I have to reduce is the bit above the horizontal menu, but for now, I'm trying to apply the query to the #primarywide div, which includes most of the content of the page.  I'll create a new div for this bit if I can get the application to work.

  I also realize that the menus are very small, but for now I just want to get this part of the sorted page

  Thank you

  Nothing else is sensitive on this page?

  Make a sensitive page, you must add the meta tag below to pagessection.

  I don't know whether or not your media query will work as I've never tried a combination of requests media width fixed/reagents.

• A few weeks ago, I started having problems to make the links and buttons to work on various Web sites. I tried the steps help without success. What gives?

  When I go to some web sites, I can't some of their links or buttons to work. For example, I can't "vote" and see the results on the MSN home page or go to my account on the homepage of Ancestry.com. Some links work, but others do not. They do not work in Internet Explorer either. I tried all suggestions for plug-ins and extensions that gives Support of Mozilla. I have run Windows 8.1, have Java as well as JavaScript. I tried to understand what is happening. Any help would be appreciated!

  Ronmissy2008, it's immediate. I'm sorry to hear about you, not being able to access some links, or use the buttons to vote on issues or read articles. " First, I call your Internet service provider and have them check your router '. There is a possibility that it may need an update of the firmware, because you have upgraded to Windows 8.1. Firmware is integrated software that implements network protocols and security for this specific model of hardware device. More Wi-wired routers and are designed to perform a firmware upgrade process. The manufacturer will be able to make improvements to your router. When I arrived AT & T U-verse, my router updated its firmware that took a few minutes to perform. Click on the link for more information on firmware updates:

  (http://compnetworking.about.com/od/wifihomenetworking/qt/firmwareupgrade.htm)

  If your service provider is done with the update of the firmware on the router, then try to update your Windows 8.1 software.

  1.) Open Windows Update by sliding into the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), touching or clicking on settings, tapping or clicking on PC, change settings and then typing or clicking on update and recovery.

  TAP 2.) or click on choose how to install the updates.

  3.) under important updates, choose the option you want.

  4.) under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click on apply.

  (http://windows.microsoft.com/en-us/windows-8/windows-update-faq)

  That's all I could think of at this moment. No doubt call your Internet service provider and let them know you have upgraded to Windows 8.1 and your router needs to be checked. In addition, ask them to update the firmware, if necessary. Then run Windows update. I'll do more research on this issue. Let me know what results you receive after completing the firmware update and windows update.