Problems upgrade memory ThinkPad Yoga 11th 20 d 9

Similar Questions

• Problem upgrade memory R61i - PC does not

  Hi all

  today I installed upgrading memory 2 x 1 GB on my R61i (7650-A6G), replacing it with the 2 x 512 MB standard memory.

  When I tried to restart the notebook nothing happened: only 4 "beeps", the screen is dark...

  I had to reinstall the standard memory of 2 x 512 and everything was OK

  How can I do to make this upgrade successfully?

  Thank you very much

  Piero

  Thank you very much! following your suggestion, I discovered that a stick does not work; I'll ask the stick for a new provider.

  Piero

• Need help with problems upgrade memory on Pavilion DM4

  I have a Pavilion DM4 1201us with original DDR3 2x2gb memory cards.

  I bought a pair of Corsair DDR3 1333 Mhz 4 GB memory cards.

  I have the latest BIOS (F.27) and I'm running the OEM Windows 7 Home Premium 64 - Bit. SP1.

  The BIOS recognizes the 8 Gb and when I run the BIOS memory test it runs without error.

  When I try to boot Win7, it gets somewhere before the logon screen and makes a BSOD with a message about a new memory being installed.

  I went back the Corsair Memory cards, but you need to know if there is a problem with any upgrade up to 8 GB of memory with my particular setup. HP offers an upgrade to 8 GB with the same spec boards. (I'm beyond the warranty period!)

  Any thoughtts?

  Interesting!

  I can tell you that the model only supports 8 GB memory: http://support.hp.com/us-en/document/c02704310

  Have you tried more than one kit of 8 GB?

  The reason why I ask is with memory DDR sometimes reticular sticks will pass all the tests if the two sticks are installed then a stick could be bad without you knowledge.

  Also you tried a bar of 4 GB and a 2 GB stick to see how it worked?

• Problems upgrade memory PowerEdge T310

  Hello

  Today I tried to update the RAM of a T310 (a X 3440 processor) server using memory 4x8Go

  The motherboard has 6 pitches in a row. (The 1st and the 4th slot have white clips).

  So, I installed 2 DIMM on the 1st and 2nd slot and the other 2 on the slot of 4th and 5th (from top)

  When I start the server, the LCD on the front, displays the following message "Temp: unavailable" (I think that there is more on this message but it stucks there), the fan runs on 100% and nothing happens. No screen, no "beeps", no LED on the keyboard or the mouse, nothing.

  I have upgraded the BIOS to 1.11.0 but rest the problem stil.

  Can you help me please?

  Thanks in advance

  tan145

  Do you think these bars work? It seems that they are compatible with my server

  Yes, that should work. the memory to 32 GB max 4 of them. Even though they are 1066 MHz they will be operating at 800 MHz if you use 4 of them. If you put only 2, then they will be exploited to 1 066 MHz.

  Thank you

• Problem upgrade memory on Satellite M40-142

  Hi all

  I am trying to upgrade my M40 - 142 (win XP) with 2x1GB memory modules. the initial memory is a single unit of 512 MB. When I remove and replace with 2 new modules of the system starts.
  If I leave the original memory in the slot and add only a single module 1 GB system startup and total ram 1.5 GB.
  If I use a single module of the new memories, the system is not to start again.

  I tried to update the bios to the latest version but when I run the .exe is an error and I am not able to run it.

  looking at the specifications of the motherboard should support the upgrade of memory 2x1GB.

  Thanks for your help

  Marco

  I guess you used the memory modules live all simply not compatible.

  The laptop s RAM can be certainly upgraded up to 2 GB of RAM (2 x 1 GB), but you must use simply compatible and God quality modules.

  Cheap may be not compatible or defective.

• Problems upgrade memory on the Satellite L30-134

  I just bought 2 x 1 GB memory for my L30-134 PC4200 and installed that they work fine in the BIOS, see and read as they should do, but when windows starts up it will crash with the two modules are installed, don't ever get to the screen with the loading bar crossing and then I get the blue screen.

  I forgot to take note of the error code, I'm afraid... (Silly I know). If I remove one of the modules and module installation original 512 with just 1 the 1 GB ones that it works perfectly. BIOS has been updated to the latest version 3.10, and again, I get the same problem...
  because everything looks good go in the BIOS I think that its more likely to be a software problem (windows) any maybe some damage data in the registry or maybe a virus... anyone have any ideas?

  In addition, the laptop is actually my step son and he really wants to have the CPU improved Celeron 410 to one that is a little faster. When we look at first in this we was told that several processors are compatible (although not really worth the hassle of installation) they were cel m 450 2 GHz, dual core t2060 and t2080 pent, as well as the core duo t2250, so he bought the t2250 and it wouldn't surprise, or should I say it power on with no display and the stopcock and just epeated cycle. So didn't take is not a genius to establish it was not compat...

  I know the t2080 are used in of the L30 and 1.73 533 FSB with 1 MB L2 cache-65nm and do walk. The t2250 is identical apart from the L2 cache is 2 MB and deepening varies from c to MB depends on when you bought it... because oe it already has the CPU it will sell and use the money to purchase one that will work. If anyone has any info that could help to ensure that it doesn't end up going round in circles I would really appreciate it...

  Oh and just to make laugh you all he was member of staff line Toshiba tech that had told him that the CPU would not work and that the L30 managed to take 2 x 1 GB memory and not once mentioned that there may be problems with two updates...
  Issues such as neither soddin work... lmao

  Are you sure;?  :|

  On the website provided in your posts, I found this info:

  _Radeon Xpress 200M_
  Memory interface:
  -UMA mode operation requires no additional memory
  -* DDR and DDR2 Support *.
  -* DDR speed * up to the * 400 mhz *.
  -* Speed DDR2 * until the * 667 mhz *.

  _Radeon Xpress 200_
  Memory interface:
  -UMA mode operation requires no external graphics memory
  -+ Variants available with single or double channel system memory support.
  -* Support for DDR or DDR2 memory *.
  -* Memory DDR * speeds * DDR400 *.
  -* Memory DDR2 * speeds * DDR2-667 *.

  concerning

• Business PC HP Elite 8100 SFF: Problem upgrade memory with operating system to 64 b.

  I have a small form Factor Business PC HP Compaq 8100 Elite, with 2 GB RAM and Intel Core i5-650 3.2GHz (n ° 2 x 1 GB 240pin DDR3 SDRAM Unbuffered DIMM DDR3-1333 - hynix HMT112U6TFR8C-H9 https://www.skhynix.com/products/computing/view.jsp?info.ramKind=20 & info.serialNo = HMT112U6TFR8C & posM... ) The operating system is Windows 10 to 32 b.

  In the reference Guide of hardware for PC installation additional memory is reported:

  Additional memory installation

  The computer comes with a double speed 3 vivid dynamic synchronous memory (DDR3 - SDRAM) dual inline memory modules (DIMMS).

  DIMMs of memory on the system card holders can be filled with up to four standard DIMM in the industry.

  These media memory are filled with at least one DIMM preinstalled. To obtain the maximum memory support, you can fill out the card system with up to 16 GB of memory. DIMM DDR3-SDRAM

  For the proper functioning of the system, the DDR3-SDRAM DIMM modules must be:

  • ● standard 240 pins of the industry without buffer non-DDR3-1066 MHz compatible or PC3 - 10600 DDR3 - 1333 MHzcompliant
  • Unbuffered ECC PC3-10600 DDR3-1333 MHz-compatible (Z200 SFF only) ● 1.5 volt DDR3-SDRAM DIMM DDR3-SDRAM DIMMS must also:
  • support the latency CASE 7 DDR3 1066 MHz (7-7-7 calendar) and latency CASE 9 DDR3 1333 MHz (9-9-9 calendar) ● JEDEC SPD mandatory information in addition, the computer supports:
  • front and double-sided DIMMs
  • DIMMs built with devices DDR x 8 and x 16; Built with x 4 SDRAM DIMMs are not supported

  NOTE: The MFS 8100 supports 512Mbit, 1Gbit and technology memory non - ECC 2 GB.

  NOTE: The system will not work properly if you install unsupported DIMM

  I replaced the ram 2 with 4 memory 4GB PC3 - 10600 CL9 DIMM 240-PIN - Kingston KVR13N9S8 / 4 http://www.kingston.com/us/memory/search/?partid=kvr13n9s8/4.

  The BIOS recognizes correctly the installed memory (16 GB) and in the OS installed memory is 16 GB (3.49 used).

  To take full advantage of the installed memory has wanted to update the Windows 10 operating system to 64 b, but the PC goes into continuous reboot.

  I've updated the BIOS but the problem remains.

  To make full use of the installed memory wanted to update the Windows 10 operating system to 64 b, but the PC goes into continuous reboot.

  I've updated the BIOS but the problem remains.

  I also tried to install Windows 7 64B, but after loading the files to start the pc freezes

  Reinstall the original memory, 10 to 64 b windows installs without problem.

  I want to know that is not compatible with the installed memory.

  And if it is possible to avoid having to replace.

  Thank you and best regards.

  @Peppe_Valenza

  I'm not surprised by the response of Kingston.  The issue of density memory was mentioned message #2.

  Try a few other manufacturers of memory and see if you can get the own memory DIMMs.

  Thanks for posting on the forum.

• Upgrade memory ThinkPad G40

  Hello

  I hope this is the right place to ask some Q on the IBM thinkpad G40... My son bought a second hand G40 a few years back. He had / has only 256 MB of memory. Now I want to improve the memory and I scanned the relevant web pages of Lenovo. Apparently the memory should be PC2100 or PC2700 may be due to the availability of PC2100? (DDR)

  Now a run on this laptop cpu - z indicates the memory is PC2300 (142 Mhz), so what gives? This was put in to be the good side or?

  and an extra Q... memory modules can be mixed? IE add a 512 MB PC2100 sodimm for 768 M? or I have to delete the original 256M and go for 2 x 512M?

  TIA

  Imbsysop

  You can certainly plug 1 additional GB. And what a difference it will make...

• Problems upgrade memory 8 GB T400.

  Trying to upgrade my T400 to 8 GB of ram. Upgrade to the latest version of the BIOS.

  I first tried 8GB (2x4GB) Corsair 1333 MHz DDR3 SO-DIMM, got the 1-3-3-1 beep. Then I tested 1600 MHz DDR3 Hyper-X SO-DIMM Kingston 8 GB (2x4GB) with the same result.

  Have been tested with only two modules, in both slots.

  Read messages saying that I should set the BIOS to the standard settings, but it did not help. Also discovered that Corsair could be problematic on the Thinkpad.

  Is there a chance that I might do something wrong, or is it only the modules of RAM that is not compatible with the T400?

  Oerjan Pettersen

  The essential modules worked well.

  Oerjan Pettersen

• Touchpad problems with windows Thinkpad Yoga 12-10

  So I had this 12 Yoga for about 3 moths now. Last month, after that I installed a new update of windows, the touchpad and the trackpoint would not work, as it has been disabled. I tried to uninstall the driver and then reinstall - did not work. I even reset the computer. STILL DOES NOT WORK. So I ran the Verifier who told me that one of the Lenovo products had problems with it - I know more what one - so I uninstalled. Still did not work.

  After all that, I tried again to uninstall the synaptics drive. When I uninstalled it... He was always there! I don't know how, but he was always there and now the touchpad and trackpoint two works. Well, sporadically. It will work for a few minutes, then will not work for a few minutes (or more). Then. It is where I am now (actually, right now, I'm writing this, the trackpoint is oop nvm. work it stopped working).

  Any thoughts on how to solve this problem? Thank you!

  Also, when the touchpad & trackpoint, windows buttons are more condensed, so that when it does not, the buttons are more spread out (see links below).

  "Digest".

  "spread".

  PS also, computer person seriously dragging when you press the CapsLock key? So, which turns off the keyboard for a solid 7 seconds?

  I THINK I SOLVED THE PROBLEM THANKS FOR YOUR HELP

• Problem upgrade memory on the Satellite L30 - 11 d

  Hi all

  I'm trying to update the memory from 512 MB to 2 GB.

  I have used Crucial memory Tester and ordered memory: 2 X 1 GB DDR2 667 CL5
  I can use either chip in a memory slot, but not the two chips at the same time

  I've updated the BIOS

  Any ideas?

  Cheers, rofleuk

  Maybe you should use compatible DDR2 533 MHz modules. RAMs compatible for this models are 1 GB with PA3411U-1M1G part number.

• Upgrade memory ThinkPad Tablet 2 (367927U) possible?

  I can't seeem to find a position or instructions on how to improve the memory of 2 GB 4 or 8. Is it still possible?

  No, it isn't. Chipset supports no more than 2 GB.

• ThinkPad Yoga 260 external monitor problem

  Greetings,

  I bought a Lenovo ThinkPad Yoga 260 (Core i7, 8 GB of RAM, Win10 Pro 64-bit, the Type of Machine 20FD) October 18, 2016.

  When I connect it to my external monitor Dell U2713H, the screen blackens periodically respectively off and turn it back on after 1-2 seconds. The display works fine with my other 260 Yoga with the same specifications.

  The problem occurs when connected via DisplayPort, but also via HDMI. I have all tried, installed upgrading the BIOS, all new drivers, reset the Yoga to the factory settings and tried it again.

  Have you any idea what need then try to solve this problem?

  Thanks in advance

  In response to customer reports of flashing or flickering on external monitors connected to Yoga 260 ThinkPad systems via an adapter OneLink + VGA/RJ45 or OneLink + dock, Lenovo has provided a solution for ThinkPad 260 Yoga systems under warranty.

  To contact the Lenovo Service, please click here and reference Service TIP SF16-T0080 / HT502248. This solution will require the 260 Yoga be repaired.

  Thank you

• Upgrade memory to the Qosmio F20 problem

  I just bought a Laptop Qosmio F20; It has 512 MB RAM DDR2 pc4200 533 MHz in standard. When I added an another 512 MB of ram the laptop turns on but the screen is blank, when I installed them separately, they work very well sound when I pair their place is happening, they are of the same manufacturer (Samsung) and the same type & speed.

  Please could someone help me with this, because I am intrigued. This laptop does support 1 GB memory 2 x.

  Hello

  The laptop supports without a doubt memory 2 x 512 MB sticks.
  You can upgrade the memory for max 2 GB (2 x 1024 MB)

  As far as I know Toshiba recommend using these modules:
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

  About you, problems with memory, it seems that both modules are not compatible I know that sounds very strange because you use the same modules (as you say).

  I recommend to replace the new module and you should check if the laptop runs correctly with other new module

• MDT 2013 Thinkpad Yoga 12 - WinPE boot problems

  We have two models of Thinkpad Yoga and use the same ethernet USB dongle to run MDT and their image with Win 8.1.

  Type 20 c 0 works very well. When we arrived the 20DK of a new type, we had some problems with our image of fat because of the different hardware profile and we weren't using a configuration of total control for drivers on our MDT.

  I created a new MDT installation on a virtual machine and I use the method of total control of the management of drivers by model. I have a profile of selection for winPE and imported the drivers of storage and network for both models (x 64 only, we don't have any x 86). I tried initially the USB3 Ethernet adapter driver I found under downloads for the 20 c model 0 but have tried since the upload of pack pilot SCCM and other I found specifically for the adapter realtek and SCCM, but nothing has changed. The current versions of pilot in my winpe folder are 8.15.0701.2014 and 8.8.0911.2013. Have updated the deployment share, copied the contents of the x 64 folder and copied the litetouchx64.wim in the sources on our USB startup folder and renamed to boot.wim.

  Currently on the 20DK I get the initial screen for MDT spash with blue background, but before any connection charges of screen I get the blue screen of crash with error (ndis.sys) System_thread_exception_not_handled. I guess I do know for sure that it is a problem of network driver but because it fails before the same connection to the deployment share it led me to believe that this was the case. I tried to turn off 3 USB mode in the bios to see if this will have an impact, and he didn't.

  The 20 c 0 still works fine and I was able successfully to the image (from my old wim of fat that I copied from my old server mdt)

  Completed up to add all the drivers for this model in the folder of WinPE drivers and who took care of her.