Problems with Akamai streams

Similar Questions

• Problems with Akamai Netsession

  Hello

  I had the most problems with Akamai Netsession to download the CS6, I bought.

  We are currently located in Ethiopia where we get a decent speed of 3 G Internet.

  I bought CS6 last December, downloaded and installed on my Macbook. Now, we have an another Macbook and I want to install CS6 on it too (I still have a license available) but I'm having all possible problems to download.

  I started the download with Akamai, but he would never keep track of download and always restart at zero. When I downloaded CS6 for my first Macbook, Akamai would be followed the progress of the download and start again from the last point whenever I restarted the download. This time, it just keeps going back to zero. So whenever Internet deconnects (which is common with the Internet connection, we have) or if we closed the window for a moment, I lose all my progress of download. I tried on Google Chrome and Safari.

  Since we buy Internet data at the minute, it cost approximately US $100 so far to try to install it and still have nothing.

  I tried the alternive download method but it doesn't work either. Have downloaded 3 GB of data until it happened: delay too long - download canceled...

  Since I always download completed on the Google Chrome on my computer, I tried to just copy fill for the second Macbook installation and install it there. But it won't work, saying that it looks like a pirated copy and that it cannot install it.

  I'm desperate. We have NEED CS6 on two Macbook. So if anyone has a solution for us, I know deeply.

  Failure audit download or installation. CS6

  And try Firefox...

  Mylenium

• My computer has problems with Netflix streaming

  Movies will load and start playing then stop and try to reload again but is sitting there spinning. What could I do to fix this?

  Hello

   
  1. This only happens with Netflix?

  2. do you have the latest version of Silverlight installed?

  3. how to access Netflix on the computer?

  
   
  Method 1: One of the reasons could be the speed of connection that may interfere with the way in which a video stream. Look for the same thing with your Internet service provider.

  Method 2: Install the latest version of Microsoft Silverlight and see if it helps.

  Download Silverlight | Microsoft Silverlight
  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

  If the problem persists, I suggest you to contact Netflix support for assistance:
  Netflix support
  http://support.Netflix.com/
   
  See also:
  Microsoft Silverlight
  http://www.Microsoft.com/Silverlight/SmoothStreaming/
  I hope this helps.

• Problems with video streaming (laptop HP with windows 8)

  When I stream videos or watch a DVD with my HP laptop, often enough the video slows way and audio will sound very strange-sounding and the dialog box is slow and very robotic, sometimes, when this is the case I will also have a pop-up indicating that the silverlight plug in has stopped working. I have the window pop up maybe 1 out of 10 times the problem occurs. Can you tell me what could be the cause of this and how can I solve this problem? Please and thank you :-)

  Hi Dephne,

  This problem may occur if an existing Silverlight installation or uninstall has become corrupt.

  You can see the following article from Microsoft to clean installation of Silverlight on your computer and check if it helps.

  How to manually clean a Silverlight broke in Windows 8 installation

  http://blogs.msdn.com/b/webapps/archive/2013/05/23/how-to-manually-clean-up-a-broken-Silverlight-installation-in-Windows-8.aspx

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• Problem with rtmp streaming video

  Hello everyone.
  I am pursuing my work e-learning for my client.
  I have a lot videos to be included in the lessons; to do this, I put two dedicated servers () And HertznerAmazon) and I put for streaming rtmp.
  
  With Amazon works, the other not.
  
  If you want to try the two rivers RTMP ( (), VLC, Open address)
  
  Amazon
  RTMP: //sstjnt3ej9a0f.cloudfront.net/cfx/st/mp4: mencalez1a
  
  hertzner
  RTMP: //188.40.83.89:1935 /vod2/mencalez1a.mp4
  
  The two streams in VLC works correctly.
  but once support in Captivate, to amazon works the other does not.
  
  I enclose two screens with le basic options.
  
  Can help me?

  
  

  
  

  
  

  OK, SOLVED!

  Error was outside Captivate.

  Thank you all

• Problem with Akamai Downloader - download trial!

  Hello

  I have made several attempts to use the Akamai Downloader to download the trial version of InDesign CS5 but I have no luck.

  As soon as I start the Downloader Akamai interrupts just down on me, on every attempt.

  Please help me with what I'm trying to get my current employer to buy the new version and need to show them the benefits of the upgrade.

  Thank you for your help.

  Best regards.

  Staffan R.

  Contact me at: [email protected].

  Stop using the akami Downloader. Use the direct links.

  Bob

• problem with the stream

  Hello

  I am facing problem in the understanding of data flow in labview. I use loop within two for the while loop, but my program ends in infinite loops.

  I have attached my VI below.

  I will appreciate for your help

  How do you know if you have endless loops?

  In box 2 of your flat sequence structure, I see a while loop that will run as fast as possible until I = 359, 360, so iterations.

  In part 3, the another while loop which runs at 360 iterations.   It is within an iteration 64 For and within another 64 loop iteration loop For.  I don't see anything that could cause infinite loops.  As if the loop will run a total iterations fo 64 x 64 x 360, 1 474 560.  It of a lot, but is certainly not infinite.  I don't know how long the code will have to run, but I don't see anything here which is particularly time-consuming.

  I suggest you put flags on all of your nodes of iteration and confirm that loops are run infinite times.

• Problem with photo streaming video

  I used to be able to watch the episodes on the website of channel 7, but now I don't have a picture when you watch streaming video.  The sound is fine, but there is no picture.

  Please do not keep your version of Windows, one secret, and please tell us what program you are using to view the video.

• After reinstalling Windows Vista, have problems with buffering of streaming video

  I have a problem with streaming video in buffer where it was not before. I recently did a clean reinstall of my OS and since then I had problems with the streaming videos buffering during their race, where he has not before. I tried to disable my firewall and had the same results, is there some download/driver I need to install/reinstall that will fix this. I have a connection high speed that shouldn't be a problem... .without me know what you think, thanks, Stan

  Hello
   
  Thanks for posting on Microsoft Answers.
   
  Try to update the network map and display card drivers and check.
   
  It will be useful.
   
  Best regards, Niranjan | Microsoft Answers Support Engineer

• Problems with media player and Streaming Online & Essentials

  I didn't know where to post this because it concerns problems reading media downloaded and all media and streaming online. In other words, any media. I have now found my problem with the problem and that's coming from MS Essentials and becomes very disruptive. Carefully One I've ever had this problem and it's probably because it was not a free service, however, since I installed essentials the problem has worsened. Also on one of my computers, the update will start just randomly and all but shuts down the system. Yet once, never happened with care. If this problem persists I will launch essentials to another more compatible antivirus protection system. Moreover, it happens with all other types of media also like Real Player and i Tunes so it is not exclusive to WMP.    All resolutions to this problem would be greatly appreciated. Thank you

  Microsoft Security Essentials questions should be directed to the MSE Forums:

  http://social.answers.Microsoft.com/forums/en-us/msestart/threads

  Installation and upgrade of Microsoft Security Essentials program Forum at the link above.

  http://social.answers.Microsoft.com/forums/en-us/msescan/threads

  Analysis, detecting, and removing threats Forum at the link above

  http://social.answers.Microsoft.com/forums/en-us/mseupdate/threads

  Updating Virus and Spyware definitions Forum at the link above

  See you soon.

  Mick Murphy - Microsoft partner

• BlackBerry Smartphones Hi there - I am new here but experiencing problems with my Storm 2 audio streaming

  I have terrible problems with my Storm 2 like very weak signal in the House - when my partner on the same network, but using a curve has no problems (she gets 4 bars of signal, I'm lucky if I get 2)

  also, I can't stream audio from a site I want to hear - something that she is capable of doing.

  When I try to live from a radio station, I get the following message: «!» "This selection contains no valid songs" memory buffer... is displayed in the upper right corner, but no connection is ever made.

  Any ideas what I need to do to correct the thing?

  Also I can listen to or download mp3s I put it online for access via my storm (unfortunately I use mac os x 10.4.11 and the blackberry desktop manager is only for os x 5.5 or higher - mark/space missing syncalso has serious problems with the synchronization of all media to the storm)

  could do with some really helps and have had a good look but can find very little to help me so it's a bit of a long first post, I'm afraid.

  Hi and welcome to the forums!

  A few places to visit: Blackberry 101    tips & tricks

  I would check the Storm Forum

  There are a lot of great users out there who can help get your wheelchair storm.

  It's great to have you here! Keep coming back.

• Problems with audio/video streaming with USB devices on zero clients

  Hello:
  We are using view 6.1.1 in our environment and problems getting audio/video streaming to work well with the USB headsets, with zero customers.  Helmets are Jabra Link 360 and customers zero Samsung NC241.  Helmets are used as well for the phones to Jabber and also as audio device by default.   We started with the audio driver Teradici and everything seemed to work well, except that users could not answer calls on the headset itself with the button on the headset.  They were able to answer the calls of Windows though and the part worked fine.  In order to get the physical button to work, we had to first fill the USB receiver they use on the zero clients so that Windows will see as the device Jabra 360 and not the audio device Teradici.  Then we had the EHCI USB mode on them as well, and after that he started to work very well.  However, the helmets also serve as the audio device main as well as the communication (phone) device, with audio streaming continuously throughout the day.  With the current configuration, audio streaming will cut in and out during the day, and audio/video is not always to stay in either phase.

  I also applied the registry in this KB hack, VMware KB: improvement in audio quality when you use speakers or USB headsets with a desktop VMware view Horizon 5.2 , which helped clear up Crackle that we originally with the part phone headsets.  But there is still the issue of streaming audio.

  I wonder if the effectiveness of the bridging USB is not as effective and also is there a way to make this work better?  I read that the use of the pilot Teradici is supposed to help with audio/video problems, but do not know how that can be applied to USB devices as we use.  I've been reading upward on Teradici audio/video settings, but do not know where to go from there.  I was hoping that there are some best practices to use USB headsets with a view, but so far I'm not finding anything useful.

  For any help or suggestion would be greatly appreciated.  Thanks in advance.

  We were finally getting help by the people of Cisco after validation in the here and even open a support ticket with VMware, which was open for more than a month without will.  Where others try to implement similar, here are our findings:

  • Zero clients combine traffic USB and PCoIP.  It is not good when there is a lot of audio/video/USB traffic, especially the USB headsets that also carry audio softphone.  In our case, the USB traffic was so dense that it was causing audio and video become troubled and freeze and eventually cause the pcoip_server service to break in the virtual machine itself and cause the client disconnect.  The fix?  Don't use customers zero with USB phones software, they are not just designed for this type of solution.
  • Thin clients are much better designed for USB softphones.  In our case, we used the Cisco VXME client, which is the method of support for the use of Windows thin clients with the client of the Horizon.  There is integration between the two products that isolates the VOIP traffic out of the virtual machine and keeps it local on the client itself.  Regular audio and video traffic still go through the virtual machine using Teradici or VMware RTAV driver.

  Hope this helps others who may run this question.  One thing we did not try was a wired headset using the AV sockets on the zero client and Teradici audio driver.  This can work, but our needs here were the headphones must be bluetooth, so we were forced to stick with USB.

• Problems with Flash video streaming in any browser (Windows 8.1)

  Hello.

  Since perhaps the last Chrome update (version 42.0.2311.90 m - I tried versions of 32 and 64-bit) or some 8.1 Windows updates (I don't know for sure), flash videos don't even start to buffer - they play only once the entire content is downloaded (or loaded into the reader of the site). Then, if I try to watch a video from a Flash Player based (like Dailymotion or Vimeo) interface, I have no streaming, and I have to wait a long time, watch a '1% ' or a wheel loading until the full content is available to watch.

  This is the case with all browsers, not just the Chrome (IE and Firefox too). I tried to update flash player (first version, 17,0,0,169 and then tried the beta version, a published April 14, 2015). No difference at all. So, I think that this could be a problem with the drive itself, or with some settings in Windows.

  
  

  So, lets go to the facts:

  -Happened all of a sudden no reason apparent - a day he worked, and he was not on the other day.
  

  -J' have the last version of every browser I use (Chrome, IE and Firefox).

  -My version of Flash Player is, currently, the latest version;
  -J' tried older versions of Flash Player. did not work;
  -This is not the case with HTML5, like Youtube video players, so I think that it is not a codec problem;

  -J' have the latest graphics driver nVidia. And it was happening even before I update the driver (I have a GeForce GTX 770);

  -J' tried to disable hardware acceleration on the Flash settings, nothing happened.

  -J' by default uses the Windows Firewall and defender. Tried to disable the firewall, nothing happened;

  -J' had looked all over the internet for the answer, but I can not find it. I already have all that Adobe troubleshooting pages told to do;

  -My internet connection is fine. It's a fast connection, and it's the wireless. I have several PCs connected to this network and video flash work well with them, that in this specific machine is not;

  -J' tried to uninstall flash player and install it several times with several different versions. Did not work;

  -Tried to disable as different versions of flash player on Chrome, nothing happened.

  
  

  The thing is, I can imagine that this might not be only a problem of flash player, but since this is the only problem with plugin, I, I thought you might have the answer.

  Thank you.

  Hello! It has been a while. If I could do the necessary research.
  First of all, thank you Jean-Luc for the answer.

  After the discussion, I discovered that it was not only not set buffer, but sometimes common downloads Flash videos too. Sometimes, I could see the download file only after being completely downloaded. So, at this point, I knew that was no more Flash video problems. Something must have been messing around with my proxy settings.

  I have fresh installed Windows 8.1 again. And I discovered that I had an app running in the background called "hora Buscapé na", which was a program automatically detect the best deals for products to buy here in the Brazil. I finished his task, and thing go back to normal, I guess. I tried to contact their support, but it's a maze to rethink the role of the contact.

  So, I'm sorry for the inconvenience and thank you for the help.
  I see many people with the same problem on the internet without answers, so for these people, there could be another application or process of screwing with your proxy servers.

• Problem with streaming sites

  I am so tired of my streaming sites work not properly since the upgrade. (I was hoping would help upgrade) VERY frustrating. These are the sites. http://www.Livestream.com/unclehenry stops sometimes all together, http://www.iheart.com/#/live/1/?autoplay=true and http://www.africam.com/wildlife/lc_player_chat.php?sub=nn & ch = popup & sh = tm-1 the two 2nd stop intermittently. I changed the "dom" on everything; config false and have checked all the plugins. What can I do now?

  COR - el,

  I spent the time playing with the values of dom.ipc.plugins. For someone else with the stream of questions, it helped me. (so far) About: config in the dom.ipc.plugins.enabled, I left the value to True. The rest of the "dom.ipc.plugins", I left on false and so far I have had no breaks in my streaming. It was just a matter of testing each on true and false. I don't know if it was the real fix, but it seems to have helped a lot. Fingers crossed it continues to work as well as it did this morning. Thanks for your help cor - el. I hope this will help others also.

• HP stream 14-z010nr: problem with zero PC refurbishment

  Hello forum hp,.

  I am a student and I only use this laptop for my Microsoft Documents and some projects but some how the laptop has been lag. So I want to reset my laptop and advance.

  Now I have problems with my PC reset.

  This is the screenshot of the error-> http://puu.sh/icGDA/aee8045c20.png

  He said "there was problem reset your PC.

  I tried to reset it in advanced options, but it shows the same error.

  I checked the Disk Manager and there's always a recovery partition, but I can't do a reset.

  It's my screenshot of disk-> http://puu.sh/ihDWi/c8c5c8d46d.png Manager

  So, please help me hp community.

  Thank you very much

  Win Aung

  Sorry for my English.

  I just check. The Windows icon does not appear in my taskbar.

  I had ordered a HP recovery media. Hope that will solve my problem.

  I'll accept that as a solution because there is nothing much I can do if I don't have a recovery media.

  Thanks a lot for all those HP community formed to help me solve the problem. It really helps my problem and also I get more knowledge.

  Have a great weekend,

  Win