problem with the stream

Similar Questions

• Siri having problems with the connection.

  Hello

  I have an iPhone 6 Plus, 64 GB with IOS version 9.3.3 (G 13, 34) and the carrier is Vodafone.

  I have problems with Siri, feel when I asked her a task (research or appeal), after a few seconds of waiting, the answer is always "sorry, I have a problem with the connection. Please try again in a moment. »

  I have the right connection with Internet with WIFI and 4G data stream.

  I did reset network settinjg, but I don't see any improvement.

  Please indicate what I can do and if it's a common problem with the iphone 6.

  Thank you!

  CC

  After the reset of the iPhone ("home" button and close button for 10 seconds, with the iPhone connected to the computer), Siri works!

  I am concern I have to do this reset every 2-3 weeks if I need services of Siri...

  Good luck to all of you who have the same problems with their iPhone of hares!

  CC

• Hello! I have problems with the bluetooth audio

  Hello!

  Help, please! I have problems with the bluetooth, when I use jambox with my laptop for audio streams, the freezing of the computer laptop everything for every 5 seconds. I don't know wat to do...

  I would update the drivers of BT:

  http://us.Acer.com/AC/en/us/content/drivers/4732;-; Longs % 20V3 - 772G

  Select windows as the operating system 8.1

  Check if you have Broadcom or Atheros

• [WRT1900AC] Problems with the subtitles (.) (SRT) with. MP4. AVI and others. MKV videos

  Hello

  I use the WRT1900ACS 2.0.0.173388 firmware and I noticed a few videos with. Just SRT subtitles does not work on my smarttv via DLNA server.

  I have some MKV videos with. The SRT subtitles I can perfectly look through DLNA, but. MP4. AVI and others. MKV seems simply do not find subtitles.

  All of these videos with. SRT subtitles, I can watch properly on my Mac or directly into the USB port on the TV, which seems to clearly be a problem with the router or some settings.

  I tried to rename the extension of the file from. MP4 and. AVI to MKV, but also did not work.

  Are there other settings that I can do?

  I suggest you use a software of 3 rd-party, which we are not trained for, that can integrate the file of external subtitles for YouTube videos. Media Server is a router feature that will allow you to stream multimedia files to your DLNA or active UPnP devices within your network. With this, external subtitles as SRTs file may or may not be detected because it is not a file of DLNA support.

• Problem with the playback of an audio .asx file in Windows Media Player.

  Hello

  I'm not able to play an audio .asx file in Windows Media Player on the Windows Vista-based computer.

  I get the following in a pop-up error message:

  Windows Media Player cannot play the file because the specified protocol is not supported. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:" or "rtsp:").

  Help, please.

  My email address is * address email is removed from the privacy *

  Thank you.

  -HimAlandi

  Hello

   
  1. facing this problem with the .asx format?
  2. you remember to make changes to the system?
  3. where is the file?
   
  Error message: "Windows Media Player cannot play the file because the specified protocol is not supported. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:" or "rtsp:"). »
  Windows Media Player cannot play the file because the specified protocol is not supported by the player or not supported by the server.
  If you encountered this error by clicking a link on a Web page, the link isn't valid.
  If you encountered this error by typing a URL in the open URL dialog, try opening the file using a different transport protocol (for example, "http:" or "rtsp:").
  The following is a list of protocols supported by the player and the correct URL syntax examples:
  
  (a) MMS://serveur/nom_fichier (for example, a file with a .wma, .wmv, .asf, or .mp3 extension)
  (b) http://server/filename
  (c) rtsp://server/filename
  (d) mms://server/sami.asf? SAMI = http://server/sami/sami_demo.smi (SAMI file)
  If the Player supports the protocol you used in the URL and you can't always read the content, check that the drive is configured to use all of its supported protocols.
   
  To configure the protocol settings
  (a) in the Player Windows Media, on the Tools menu, click Options.
  (b) in the Options dialog box, on the tab of network in the Streaming protocols area, select all the checkboxes (Multicast, UDP, TCP, and HTTP) Protocol, so that a check mark appears in each.
  (c) note that the supported protocols can be used only to distribute digital media files. Windows Media Player cannot be used as a browser.
  If the fixes above don't work, you can rename the folder of information network for the drive so that it can rebuild its information network files after restarting it.
   
  To rename the folder of information networking of player.
  
  (a) close Windows Media Player. (To do this, on the file menu, click on exit).
  (b) to make the changes that you will be able to see the hidden files and folders
  Show hidden files.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Show-hidden-files
  (c) click Start, and then click computer.
  (d) open the disc drive Local (c :)), open to users.
  (d) open your user account.
  (e) open %APPDATA%\microsoft\windows\sendto and open Local.
  (f) open Microsoft and open Windows Media.
  (g) click on the file and rename it.
  (h) if the file is name12.0, edit as file name as old 12.
  (i) restart the computer and check

• Problem with the volume of a new 7 Slate

  I'll put up a new slate of 7 and I have a problem with the sound.  I have all the sliders to the max value, but any video or app plays at a very low volume on the builtin speakers. A trial has been with FIOS app that allows me to stream TV shows. I have to hold the Tablet so the speakers are right next to my ear to make the same concersations on the show and it's barely...

  Am I missing something?

  How to make your slate with audio files simply by using the application to play music?  And have you tried to play a trailer of the game of Google?  Type right on a movie title and play the trailer by typing on the > arrow.

  What if you use headphones?

  Do you have ear system sounds?  Go to settings > sounds > Touch seems to be there where there is a checkbox on the right whether Touch sounds are on or off.

  Speakers of slate are not all that, but they do not produce a sound that is strong enough to listen to the TV shows and movies.  If you can not enough volume of them with other applications such as the music plays, there may be a hardware problem.

  A few other suggestions... try to restart it.  And back to headphones, try inserting a headphone plug in all the way and disconnected.

  _
  As a contributor of top of page on the Forums of media consumer, HP, HP gives me access to the slate of 7 free of charge so I can better answer questions on the Forum.

• "Détarer" problem with the Torch 9800/Device Simulator

  Hello everyone,

  Im a very strange problem with the Torch 9800 (OS 6).

  I have an application developed with 5.0 SDK. Throughout the process of synchronization of this app, there is a point he gets a. tar.gz file that is unziped. For this purporse (in fact, the tar part / "détarer"), we use a tar / "détarer" 'library' we found here in the forum (http://code.google.com/p/j2metar/). This library works fine in all phones with OS 5.0 that we try and even on the simulators of somo 6.0.

  But there seems to be a problem with the torch. During the uncompress, there are an exception, because what is the reading of the structure of the tar (from the industry), load the bytes that are invalid, corrupt, dirty, memory, and it fails.

  The strange thing of all is that if I have only the routine détarer to the file (in the torch), it works! But when I run all my sinchronization, which open and close httpconnections and process the file on some points (sometimes the same point, others of different) fails.

  My question is... are at - it a known bug, issue, etc. with the BONE of the torch (touch device)? Of course, the first thing that jump to mind is "my code is incorrect, memory leaks (in Java, but perhaps odd that a stream was not getting close properly)" and so on, but I can't seam to find the problem. And like I said before, this application works fine with the same file tar.gz in other devices like the 8520 OS 5, 9780 OS 6, 8900 (OS 5).

  IM completely stuck with this problem and any help/test will be greatly appreciated.

  Here some code, the method that makes him détarer and calls the détarer/tar library:

  public static boolean "détarer" (String tarFileUrl, String destUrl) bird Exception {}

  FileConnection fconn = null;
  FileConnection tarFileConn = null;
  TarInputStream tis = null;
  Boolean bRet = false;

  try {}
  fconn = (FileConnection) Connector.open (destUrl, Connector.READ_WRITE);
  If (! fconn.exists ())
  fconn.mkdir ();   Create the folder if it does not exist
  fconn. Close();
  fconn = null;
              
  Create a TarInputStream
  tarFileConn = (FileConnection) Connector.open (tarFileUrl);
  TIS = new TarInputStream (tarFileConn.openInputStream ());
  tarFileConn.close ();

  Entry TarEntry;
  int count;
  data Byte = null;
              
  While ((input = tis.getNextEntry ())! = null) {}
  Count = 0;
  data = new ubyte [2048];

  fconn = (FileConnection) Connector.open (destUrl + entry.getName (), Connector.READ_WRITE);
  If (! fconn.exists ())
  fconn. Create();   create the file if it doesn't exist
  else {}
  fconn. Delete();    Create a new
  fconn. Create();
  }

  OutputStream os = fconn.openDataOutputStream ();
                  
  While ((count = tis.read (data))! = - 1) {}
  OS. Write (data, 0, count);

  }
                  
  OS. Flush();
  OS. Close();
                  
  fconn. Close();
  fconn = null;
             
  }

  TIS. Close();
  TIS = null;
              
  bRet = true;
              
  } catch (Exception e) {}
  e.printStackTrace ();
  throw e;
  } {Finally
  try {}
  If (tis! = null)
  TIS. Close();
  If (tarFileConn! = null)
  tarFileConn.close ();
  If (fconn! = null)
  fconn. Close();
  } catch (Exception e) {}
  }
          
  Return bRet;
  }

  Thank you!

  Santiago.

  Hello

  It is a problem with the OS 6.  I've posted about this before here:

  http://supportforums.BlackBerry.com/T5/Java-development/reading-and-writing-file-on-torch-9800/TD-p/...

  Basically, corruption may occur if you write to the stream simultaneously in different threads.  The solution is to ensure that a single file operation is occurring at a given time.  Some people have had the chance to control the size of the buffer to something as a multiple of (64 * 1024)-1. e.g. 65535.  In addition, you can rinse after each write to the buffer.  I have had no luck with this, but others.  If you look at the bug in JIRA, there is also no activity on this:

  https://www.BlackBerry.com/jira/browse/JAVAAPI-1513

  Good luck!

• Problem with the local adjustment brush

  Problem with the local adjustment brush:

  Tire of a photo with the iso 6400 to a person and I wanted to increase the exposure of the face only. So I set the exposure compensation of at least 4 local adjustment brush, in order to see where I paint. In earlier versions of lighroom I got a smoth black area. My intention was, and then adjust the brightness to + 0.33 in order to get a slightly lighter face. But I have no black smoth area. Instead, I largely perforated black area. After setting the exposure to + 0.33, the face was indeed more light, but with many large tasks very ugly.

  The brush settings:

  Fat / size was 7.1.

  Weiche Kaiser / smoth edge was 50.

  River / stream was 60.

  Dichte / density was 100.

  Automask has been verified.

  Any ideas?

  Maybe it's because you have "Auto mask" checked the.  Uncheck the box before painting to see if that helps.

• Problem with the sound & UILoader

  Hello!

  I have a menu with 4 buttons. Each button loads a different SWF file, but I have a problem with the background music that I put on each of these files. As I had to put the music as an audio file of the event, so when the user clicks a different file, the background music of the original file is reading. And I can't put music as a stream because I have the Actionscript code in place he stops just before it even starts!

  The only way I can think to get any is put actionscript in my main menu to control the sounds... I guess I'm asking if there is a code to do no matter what stop music playing when another button was clicked?

  You can stop all the sounds at any time by running:

  SoundMixer.stopAll ();

• Problem with the movieclip by double loop

  Hello, this is more a problem of logic programming that actually a problem with the code.
  
  I'm building a schedule where each month are built on the fly with the movieclip duplicate for each day (with an empty textfield). I am building the calendar according to the number of days of the month has, he begins to what day of the week, etc, etc..
  
  Then I load an external xml with the new arrivals. Subsequently, I need to check the days of this month were new. At the moment I have 2 parts in stock in my xml stream ( http://s50699.gridserver.com/xml/news_en.xml). It all works very well.
  
  However, I only manage to highlight a day of this month, the last news item-, which means that the loop runs twice, but he recorded only the last number, so the day highlighted that shows on the calendar, is, therefore, of this last point news.
  
  I attached the code below and will be really grateful for any help or general advice.

  _root ['dot' + s] does not know he has a report any with the number i after the advances of your loop. in particular, by releasing _root ['dot' + s] I'll be the last value of your loop.

  to remedy this, use a variable that stores the value of i when _root ['dot' + s] is created:

  .Ivar _root ['dot' + s] = i;

  and use this.ivar rather than I in your onRelease handler.

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Sierra Siri, «I have some problems with the connection...» »

  Guys,

  I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

  Any ideas?

  Thank you

  N

  It's a network problem.

  Check the proxy settings that blocks maybe, or a firewall.

  System Preferences > network > Advanced (for your current connection) > Proxies

  Something there?

• Siri does not (problems with the connection)

  Hello

  I installed macOS Sierra yesterday. Everything seems to work fine, except Siri. With Siri I always get an error message "I am having some problems with the connection. Please try again in a moment. ». But this seems to appear every time. The network connection works fine, I can't access the Internet without problem.

  No idea how solve the problem?

  I use an iMac (27 inch, mid-2011). Internal microphone is connected, I also see the 'waves' change while I am speaking.

  Concerning

  Thomas

  Hey, thochstrasser. Thank you for using communities of Apple Support.

  It seems that Siri is reluctant to make his debut on your iMac after upgrade to Mac OS Sierra. I want to make sure that you get the benefit of this new feature on a Mac.

  1 try safe mode if your Mac does not start -even if your iMac to market, safe mode makes sure it starts successfully.

  2. How to test a question in an another user account on your Mac - since this is most likely a software problem, test to another user will indicate if it is right to your user account or throughout your system.

  3. use Time Machine to back up or restore your Mac - if it seems to be systemic, the next step should not cause problems. But it is always better "to have" a backup to the "need".

  4. on OS X Recovery - the issue as part of the operating system, reinstall should do.

  Have a great weekend!

• iOS 10 problems with the Mail application

  Dear Apple and community support,

  Here's my problem:

  I have upgraded to iOS 10 on my iPhone 5s this afternoon (September 13), and now I'm not able to open e-mail - Yahoo!, and Gmail. I can receive emails, I'm not able to view the body of these emails. When I press on them, all I see is a blank white page. I can't answer emails either. I can only their flag or remove them. However, I am able to compose new e-mail messages.

  Here are the steps that I've taken to try to solve my problem:

  1. Restarted my phone
  2. Remove and re-add my Mail accounts
  3. Made a backup and a restore full while that plugged into my laptop with the latest version of iTunes.

  I should be grateful if you would help or more information on this issue.

  Thank you

  Emily

  I also have problems with the Mail application.  On my iphone, ipad, and Mac Pro.  I have several addresses, a MSN, another on Go Daddy and Gmail.  I have various weird problems with threads and every day he re-charge my emails, like if I have never read before.  Something is really problematic with Mail.

  Can the people of APPLE, you help me?

• Problem with the installation of iOS 10

  I tried to install iOS 10 earlier but it did not work, so now that I'm trying to reinstall iOS 9 if my phone will work again, if this does not work I have to reset my phone (but I am a fool and did not a back-up because I never had a problem with the software updates in the past if all data will be lost).

  < published by host >

  The same problem with me too. After installing ios 10 nuer OTA my iphone brick! I'm trying to re - install ios 9 i-Tunes, but 2 hours now always stop installation... what happent?