Problems with black when cropping

Similar Questions

• Hi, I have a problem with FF, when I click on a google site, opening in a new tab and I don't want to, can you help me?

  Hi, I have a problem with FF, when I click on a google site, opening in a new tab and I don't want to, can you help me?

  Hello, this may be a preference in your google search parameters. go to google.com/preferences and disable the option to search results open in a new browser window.

• Does anyone have problems with playback when editing v9.2?

  I have problems with playback when you change a small project (4 min).  I had a few problems on previous projects, but this one is particularly bad.   When I read my edition, the (unique) audio plays normally but video lags or freezes completely.  I can get around it temporarily by parts of the sequence rendering, but that's a lot of time and as soon as I make a change, the problem reappears.  I updated drivers etc. After reading the other reviews but it now becomes impractical, and I'm seriously considering whether I should continue with first or look for something more reliable

  PLUG

  Samsung Chronos i7 with 8 GB of RAM and a lot of spare

  WIndows 10 build 10586.218

  First Pro 9.2 zigzag

  Pilot of 640 M from NVIDIA Ge Force GT 353.90

  

  The only area I think needs expansion is the disk configuration.  Here's what I recommend as a starting point.

  C: Windows and programs

  D: project files, audio, and still images

  E: cache and Scratch

  F: media camera only

  G: export

  In addition, a form of backup solution in place.

  The above will give you excellent disk performance, spreading things to prevent the creation of a bottleneck.  It is based on the use of the HARD drive, simply because they always have the best bang for the buck.  But if you have the scratch for some good sized SSD, the situation changes a bit.  You could probably combine D and E on a single SSD and F and G on a third party, without slowing things down significantly.

• HP6520 - problem with black ink - no black ink on paper

  I have a 6520 All in One – this week the printer decided to stop printing in black ink - cartridges were installed a few weeks ago and level is higher than 50%

  What procedure I tried, the printer does not print with black more - also not a bit - paper stays white where black ink should be!

  Of course the printer is out of warranty (02-2012), but as I see it, this problem happens a lot on this type of printer - so there is certainly something wrong

  Please HP, it may be that I have to replace my printer after 2 years because he is not black print more or I have to pay more money to fix when I have to pay for a new printer.

  Awaiting your response

  Peter Boermans

  The Netherlands

  Hi Pandabeer,

  I understand your frustration, I see that you have completed all THE procedures listed here troubleshooting: printer does not print black ink or color of ink or prints blank Pages without success, I would like to contact you with our HP technical support. I understand the 6520 PS is longer under warranty but I am confident that they will be able to help you with this problem. You can contact our support at 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  Thank you

• Windows 7 starts problems with black screen and the cursor because of power failure

  I'm on a Windows 7 64-bit Home Premium OS. Start-up problems arose after the power failure (accidentally unplugged the charger, the battery was not in place) during a video call in Skype. Accessories attached to the laptop at the time were a Logitech Webcam, a dongle Bluetooth, microphone and headphones.

  When starting my laptop Asus N81VP, he'll go as far as the 'Starting Windows' logo, then I meet a black screen with a mobile cursor. I don't then right click, CTRL + ALT + DELETE.

  I tried the things:

  Start Up Repair = "cannot automatically repair."

  System Restore = no available restore points

  Windows Memory Diagnostic = at 100%, no screen of detected problems, then black with mobile cursor

  Networking Mode Safe Mode/Safe = black screen with cursor mobile

  Activate video low resolution (640 x 480) = black screen with cursor mobile

  Good known Configuration = black screen with cursor mobile list

  Start Windows normally = black screen with cursor mobile

  Please help me. I've had this laptop for less than a year, and it would break my heart to have to re - format.

  You seem to have exhausted most of the options available in such cases, except two:
  D ' log in under a different account.
  -To restore your registry files manually. See below for more details.

  On your heart that could get broken: have you considered using the imaging facility that is integrated with Windows 7? You can find it in the control panel / backup and restore. This is somewhat marginal in the feature and it can be finicky, but it saved my butt several times.

  You can restore your registry files manually to a previous point through the steps described below. The process is complex and requires some careful typing. Ask a computer-savvy friend to help you if you lack experience in this field. Note that it may reset your password to a previous value.
  1. keep tapping F8 during the first phase of startup.
  2. Select repair in the menu that looks like this:
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  3 log in as administrator if you are prompted.
  4. Select repair when prompted.
  5. Select the command line in the menu that looks like this:
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
  6. identify the correct drive letter for your Windows installation. It could be one drive other than c, but it will not X:. You do this by typing commands
  DIR C:\Win*
  Dir D:\Win*
  dir E:\Win*
  until you find the Windows folder.
  I'll call this "Q:" drive
  7 type these commands:
  CD /d Q:\windows\System32\config
  xcopy *. * Q:\MyRegBack\
  CD RegBack
  dir
  8. review the dates of the software, system, and SAM files. The files created before or after that is your problem?
  9. If they were made before the problem appeared, you can then type these commands:
  copy software / y...
  /y copy system...
  /y copy Sam...
  (the two points are part of each order)
  10. restart normally. If things don't work then you can go back by copying files from the original register of Q:\MyRegBack to Q:\Windows\System32\config.

• Re: Problems with Microphone when I use Skype

  Could anyone help with the problems I am experiencing with the microphone when using Skype?
  I also tried to use an external, but still problems with the other person can't hear me, y at - it a setting I can adjust its been to Toshiba and they said that there is no fault.

  Any help would be appreciated.

  In fact internal mic works well with Skype.
  All you need to do is enter the sound options of Skype and check the settings there especially if you use the headset.
  Play around with these settings.

• Problem with BBM when

  Hello

  I am facing a problem while developing my BBM app.

  I use BBMPlatformSession to send invitation.

  UserA sends the request to UserB. UserB is attached to it and we have a session in the list and each other.

  UserA-> UserB

  UserB-> UserA

  Now, If UserB sends request to UserC UserC joins, and each user is to have 2 members in the list of contacts of their session. , His work as expected.

  UserA-> UserB, UserC

  UserB-> UserA, UserC

  UserC-> UserA, the UserB

  But, the problem comes when inverter happends, i.e. UserC sends the request to UserB. In this case, each user can see only another user in their contact list.

  UserA-> UserB

  UserB-> UserC

  -> UserB UserC

  I do not know this is the way THAT BBM works or miss what either.

  Thank you

  Sumit.

  Hi Sumit,

  This looks like a problem with the session handling in your application. You can check to see if a session is already established with UserB before allowing the UserB join another session with UserC, or ask us for UserC to join your existing session. TicTacToe sample shows a logic similar to the former, it blocks the second user tries to join and sends a message if a game is already in progress.

  Kind regards

• Problem with black ink

  Hello there, I have a HP C6380 printer. I ran out of black ink small 564. I have a larger 564 black ink there how can I get the printer to use the largest cartiage of ink instead of replace ink 564 more small.

  Thank you

  Scott

  @yellowlabscott, Yes, you can use the cartridge of 564 more GRAND. It should be inserted directly into the slot and read it.

  Are you have problems with the larger cartridge is not suitable?

  New XL cartridges are made more small these days, but they are still considered as the largest and more ink. So it still needs work.

  @alexisgb, you may need to clean the black cartridge. Try to clean the print head and check the results.

  You also have the Photosmart C6380?

• Problem with iPad when I try to choose a photo from library using browseForImage

  Hi, this is my first post, and I hope you can help me with this problem... I'm using cameraUI.launch to open the camera app, and take a picture without problem, it works fine, but when I try to open the Gallery to the iPad using browseForImage this open a small window to select a rigth folder? but when I try to select any folder this cancel any operation and I can not download any image from my Gallery... Please help, Im works with FB 4.7, apache 4.14 and adobe Air 16.0.0.272 on iPhones and Android devices I have not this problem right on iPad.

  It's source code:

  protected function btnGallery_clickHandler(event:MouseEvent):void {}

  If (CameraRoll.supportsBrowseForImage)

  {

  If (Capabilities.manufacturer.IndexOf ("Android") > = 0)

  {

  loader = new Loader();

  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, this.contentLoadedHandler);

  }

  cameraRoll = new CameraRoll();

  cameraRoll.addEventListener (MediaEvent.SELECT, imageSelected);

  cameraRoll.addEventListener (Event.CANCEL, browseCanceled); / * This function is activated whenever I try to select a folder to select a picture on the iPad * /.

  cameraRoll.addEventListener (ErrorEvent.ERROR, mediaError);

  cameraRoll.browseForImage ();

  }

  }

  Finally I find a solution, in fact adobe has solved the problem with the new beta 17 Air... you must download for flex developers and use this version on your project...

  Download Adobe AIR 17 Beta - Adobe Labs

• What is the problem with the tool crop of Photoshop CS6? (photo included)

  Since I upgraded to Photoshop CS6 and started to use the new crop tool, I get this very interesting visual error and some artifacts.

  I have the problem with the crop tool in previous versions of Photoshop.

  What can be the problem?

  

  Looks like a GPU problem. You can try to go in Photoshop preferences, disable the GPU acceleration and try if that fix it?

• Problem with Audio when it is loaded on the main Clip

  Hi, I have this problem with a clip containing audio. I'm doing a website.

  The home.swf is the main element and when I want to go to the 'Audio' this audio.swf charge in home.swf , that the problem is that once it has loaded it plays the audio. The mp3s are inside audio.swf, it is not streaming. When I play just audio.swf by himself, it sounds good, but if it is loaded within home.swf it doesn't.

  I hope you can help me!

  Thanks in advance.

  If you are using as2, in audio.swf, whenever you have:

  var whateverS:Sound = new Sound();

  use

  var whateverS:Sound = new Sound (this);

• Problem with flight when using no call blocking

  Hello
  
  I have a scenario in which I need to call a service several times based on header lines. I used the following approach to reduce the execution time:
  
  1. use flight with "n" being the no. lines in the header.
  2 call the service inside the flow with nonBlockingInvoke set to true for the PL. The assignment of the var of entry for the service takes place inside of flight activity.
  
  The problem with this approach is that the assignment happens correctly. for example. LineId1 is assigned to the service entrance in the first stream, LineId2 the second rate and so more..., but in the used input variable values by invoke remains constant in the first mission that produced the first stream Viz LineId1 will be happened as an input for all activities of other flows, despite the copy in entitled operation happening properly.
  
  Can anyone share some thoughts on this?
  
  Kind regards
  Sandeep

  Hi Sandeep,

  I think the mistake you make is that the defined variable to call the service endpoint (i.e. the input of the invoke activity variable) should not be a global variable, but instead should be defined as a local variable in the scope that contains the activity of flight.

  Concerning
  AYUSH

• Having a problem with artifacts when using Dip to black transition

  I use Adobe first Pro CC on a Dell XPS 8900 with a NVIDIA® GeForce® GTX 745 4 GB of DDR3 memory. Both in the Editor (with all the rendering) and the final video (which I tried to export in several ways), I get artifacts when using the two Dip to black and chained transitions. I did check the sequence settings to match the original film, as I originally had two cameras (ARRI and XDCAM) images. I get the problem on two types of sequences. I tried to convert the original film in .mp4 using a HD video converter and then re-import it. The problem remains. Then I tried to download sequences of archives on the Adobe site and imported. And I still have the problem. I think that it has something to do with my computer as before to get the XPS 8900 I had used an older Dell model (without graphics acceleration or upgrade) and had not not this problem. You can see artifacts in the video below. Strangely, I don't see any artifacts when I used transitions on the titles of lower third or in transitions from outset between title sequences. It is only when transitions are used on real images (and, again, I tried to use other types of sequences and had the same problem). Any thoughts on how to solve this problem would be greatly appreciated.

  I am simply not see something weird.  The transition is quite fast, however.

  Give that DNxHD export/upload to try.  See if you like better.

• Problems with keywords when using 2 directories.

  Pardon my french, I'm Norwegian... ;-)

  I LR3.6 and have a folder structure I am satisfied, I also use keywords on the images.

  Je want a Directory with B /W and an color, in order to work in a directory where only B/W images. I think that itis easier to see the images that work B/w this way...

  J’ai copied the LRCAT file into a new file. When I opened LR I chose the directory to load, B/W or Color. It works OK. When importing new photos I copy images in the desired Directory (for example. Color?) with the failure of development parameters. When I Use the directory of b/w Synchronize the color directory with the black and white default develop settings.

  I imported the same list of key words in the two directories, but the problem , it's that the the key words are not included on all when I sync. The images have the same file name so it should be possible to retrieve / Sync Keywords so?

  Is he is at - it who can help mebe, either with another solution where didn't need 2 directories or how I can import of keywords to another Directory?

  Rather than having the same files stored in two catalogs, you should have to do this as "virtual copy" in the same catalog.

  Now, to sort. To make the backup copies of these two catalogs, then use the file > import from another catalog and check the option create new virtual copies. Then import - make sure you add is selected and not copy or move. We should end up with the two B & W and executions as well as virtual color copies.

• CS5-screen work area turns black when cropping?

  I use Windows 7 and CS5.  When I try and crop a photo, the work area will become black.  Here's a clip of screen what I see.  I then cancel cropping and will sometimes return to the tool move, click the picture, black screen will return.  Suggestions or ideas why and what to do?

  

  It's a problem of display driver.

  Have you installed the 12.0.1 update for Photoshop?

  Have you recently updated your display drivers?

  Have you tried to disable OpenGL drawing in Photoshop preferences (to temporarily work around this problem)?