Problems with keywords when using 2 directories.

Similar Questions

• Having a problem with artifacts when using Dip to black transition

  I use Adobe first Pro CC on a Dell XPS 8900 with a NVIDIA® GeForce® GTX 745 4 GB of DDR3 memory. Both in the Editor (with all the rendering) and the final video (which I tried to export in several ways), I get artifacts when using the two Dip to black and chained transitions. I did check the sequence settings to match the original film, as I originally had two cameras (ARRI and XDCAM) images. I get the problem on two types of sequences. I tried to convert the original film in .mp4 using a HD video converter and then re-import it. The problem remains. Then I tried to download sequences of archives on the Adobe site and imported. And I still have the problem. I think that it has something to do with my computer as before to get the XPS 8900 I had used an older Dell model (without graphics acceleration or upgrade) and had not not this problem. You can see artifacts in the video below. Strangely, I don't see any artifacts when I used transitions on the titles of lower third or in transitions from outset between title sequences. It is only when transitions are used on real images (and, again, I tried to use other types of sequences and had the same problem). Any thoughts on how to solve this problem would be greatly appreciated.

  I am simply not see something weird.  The transition is quite fast, however.

  Give that DNxHD export/upload to try.  See if you like better.

• Problem with flight when using no call blocking

  Hello
  
  I have a scenario in which I need to call a service several times based on header lines. I used the following approach to reduce the execution time:
  
  1. use flight with "n" being the no. lines in the header.
  2 call the service inside the flow with nonBlockingInvoke set to true for the PL. The assignment of the var of entry for the service takes place inside of flight activity.
  
  The problem with this approach is that the assignment happens correctly. for example. LineId1 is assigned to the service entrance in the first stream, LineId2 the second rate and so more..., but in the used input variable values by invoke remains constant in the first mission that produced the first stream Viz LineId1 will be happened as an input for all activities of other flows, despite the copy in entitled operation happening properly.
  
  Can anyone share some thoughts on this?
  
  Kind regards
  Sandeep

  Hi Sandeep,

  I think the mistake you make is that the defined variable to call the service endpoint (i.e. the input of the invoke activity variable) should not be a global variable, but instead should be defined as a local variable in the scope that contains the activity of flight.

  Concerning
  AYUSH

• Problem with microphone when using the speakerphone in 5.1.1

  During the call to anyone... When I press the speaker button to hear a louder voice microphone be cut always... even if I uncheck the speaker button!
  To speak normally without speaker... so, I have to end the call and start a second time to get the mic working!
  What is c?
  Please someone try and post it here...
  We need an update I think to fix this bug with mute mic!
  Please answer me.
  Thank you.

  Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data so better to save before you start

  Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
  Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

  If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

• Problem with MessageRadioButton when using PPR on this event.

  Hello
  
  I have a requirement where there is two MessageRadioButton
  
  When the 1 MessageRadioButton is selected an element must be mandatory and
  
  When the 2nd MessageRadioButton is selected another point should be mandatory.
  
  The problem I am facing is when I select the 2nd element and going back to select article 1 the selection does not change.
  
  Can someone help me how can I solve this problem
  
  
  Krishna

  Krishna

  In addition to what you've done by program don't forget to set its value unchecked two option buttons.

  Thank you
  AJ

• I'm having a problem with my dropper / use pencil. I click on the color I want, but when I use the pencil or the brush is a contrasting color. I don't know if my photoshop is damaged, or if I changed some setting by mistake.

  I'm having a problem with my dropper / use pencil. I click on the color I want, but when I use the pencil or the brush is a contrasting color. I don't know if my photoshop is damaged, or if I changed some setting by mistake.

  Check if your pencil/brush painting Mode, or the layer is another than Normal.  For example, you will get the contrasting color, if the Mode is the difference or Exclusion.

• I'm having a problem with a sound used for Norton ccSvcHst.exe process. And perhaps dwm.exe

  I'm having a problem with a sound used for Norton ccSvcHst.exe process. I have all the dates of the last mounted and I roughly 1 000 000 errors page an hour and the hard drive of my computer is crazy with me doing nothing. Norton has been included in the software package supplied with the computer. so I hope that support you. What can I do to calm my computer runs to stop this service... I have also about 500 000 for the service dwm.exe. What could cause this?

  Hi dude, on average

  A. from when what happens?

  B. recent changes made on your computer?

  C. you get any error message?

  First of all, I suggest you to uninstall and reinstall Norton using the Norton Utilities disk and check if the problem persists.

  Second, you may have to perform an auditor of the system files on your computer in order to replace the files corrupted on your computer.

  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  Type the following command and press ENTER: sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Bindu S - Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Does anyone have problems with playback when editing v9.2?

  I have problems with playback when you change a small project (4 min).  I had a few problems on previous projects, but this one is particularly bad.   When I read my edition, the (unique) audio plays normally but video lags or freezes completely.  I can get around it temporarily by parts of the sequence rendering, but that's a lot of time and as soon as I make a change, the problem reappears.  I updated drivers etc. After reading the other reviews but it now becomes impractical, and I'm seriously considering whether I should continue with first or look for something more reliable

  PLUG

  Samsung Chronos i7 with 8 GB of RAM and a lot of spare

  WIndows 10 build 10586.218

  First Pro 9.2 zigzag

  Pilot of 640 M from NVIDIA Ge Force GT 353.90

  

  The only area I think needs expansion is the disk configuration.  Here's what I recommend as a starting point.

  C: Windows and programs

  D: project files, audio, and still images

  E: cache and Scratch

  F: media camera only

  G: export

  In addition, a form of backup solution in place.

  The above will give you excellent disk performance, spreading things to prevent the creation of a bottleneck.  It is based on the use of the HARD drive, simply because they always have the best bang for the buck.  But if you have the scratch for some good sized SSD, the situation changes a bit.  You could probably combine D and E on a single SSD and F and G on a third party, without slowing things down significantly.

• Hi, I have a problem with FF, when I click on a google site, opening in a new tab and I don't want to, can you help me?

  Hi, I have a problem with FF, when I click on a google site, opening in a new tab and I don't want to, can you help me?

  Hello, this may be a preference in your google search parameters. go to google.com/preferences and disable the option to search results open in a new browser window.

• Re: Problems with Microphone when I use Skype

  Could anyone help with the problems I am experiencing with the microphone when using Skype?
  I also tried to use an external, but still problems with the other person can't hear me, y at - it a setting I can adjust its been to Toshiba and they said that there is no fault.

  Any help would be appreciated.

  In fact internal mic works well with Skype.
  All you need to do is enter the sound options of Skype and check the settings there especially if you use the headset.
  Play around with these settings.

• Problem with iPad when I try to choose a photo from library using browseForImage

  Hi, this is my first post, and I hope you can help me with this problem... I'm using cameraUI.launch to open the camera app, and take a picture without problem, it works fine, but when I try to open the Gallery to the iPad using browseForImage this open a small window to select a rigth folder? but when I try to select any folder this cancel any operation and I can not download any image from my Gallery... Please help, Im works with FB 4.7, apache 4.14 and adobe Air 16.0.0.272 on iPhones and Android devices I have not this problem right on iPad.

  It's source code:

  protected function btnGallery_clickHandler(event:MouseEvent):void {}

  If (CameraRoll.supportsBrowseForImage)

  {

  If (Capabilities.manufacturer.IndexOf ("Android") > = 0)

  {

  loader = new Loader();

  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, this.contentLoadedHandler);

  }

  cameraRoll = new CameraRoll();

  cameraRoll.addEventListener (MediaEvent.SELECT, imageSelected);

  cameraRoll.addEventListener (Event.CANCEL, browseCanceled); / * This function is activated whenever I try to select a folder to select a picture on the iPad * /.

  cameraRoll.addEventListener (ErrorEvent.ERROR, mediaError);

  cameraRoll.browseForImage ();

  }

  }

  Finally I find a solution, in fact adobe has solved the problem with the new beta 17 Air... you must download for flex developers and use this version on your project...

  Download Adobe AIR 17 Beta - Adobe Labs

• Problem with case when try to alter the query from siimple

  Hello PL/SQL gurus and Experts.
  
  I'm stuck with a question (can be simple), but not gettings all headsway.
  

  select 365/day_num_yr Anul_Fact from Date where date_dt = trunc(sysdate -1) 

  value returns is as - 1.46
  
  need to write it in the form of case (I have to multiply it to some other outer query), I want to store variable ina and then use the same in an outside -.
  but when use the following syntax, then it always returns 0 and not the same output returned by the query above without the scabbard.

  select (case when date_dt =trunc(sysdate -1) then 365/day_num_yr else 0 END) Anul_Fact 

  Help kindly, I appericate your time and effort in advance.

  user555994 wrote:
  Problem is that I do not get the output as 1.46, even the output is coming like the 0 only if using the query - next

  select /*date_dt, sysdate - 1 prev_dt, trunc(sysdate - 1) trunc_prev_dt,*/
  case when date_dt = trunc(sysdate -1) then  365/day_num_yr
  else 0
  end num_day
  from date_dim;
  

  Completely, which seems to be a question of DATA. Have you checked if the table contains data for DATE_DT = SYSDATE - 1? Can you check if the data stored do not have hours and Minutes stored?

  Although I have provided examples of data, which is the same as the data in my main table and once I used the previous solution you provided and then also gives the result as same as those mentioned by you.

  I think it's something like -

  select date_dt, sysdate - 1 prev_dt, trunc(sysdate - 1) trunc_prev_dt,
  case when date_dt = trunc(sysdate -1) then  366/day_num_yr where day_num_yr=(select day_num_yr from date_dim where date_dt = trunc(sysdate -1))
  else 0
  end num_day
  from date_dim;
  

  Once we get the day_num_yr then he deviding by 366/day_num_yr :(
  but he does not like throwing an error ORA-95 - missing keyword

  Yes, it does not work

  -case when date_dt = trunc (sysdate-1) then 366/day_num_yr where day_num_yr = (select day_num_yr from the date_dim where date_dt = trunc (sysdate-1))

  due to a syntax of alien.
  I don't think that you really need. I already said, with the data in your Table, you will be having only * 1 * record with a Non - zero value. Thus, simply apply a filter to extract the corresponding record SYSDATE - 1 and you should get an output which is Non-zero. If you apply a where predicate, then would not need you a CASE statement. You can directly use something like below:

  select date_dt, sysdate - 1 prev_dt, trunc(sysdate - 1) trunc_prev_dt,
         365 / day_num_yr num_day
    from t4
   where date_dt = trunc(sysdate - 1);
  

  Published by: Jen K, September 7, 2012 16:00

• Firefox locked up with YouTube when using Dragon NaturallySpeaking

  I use Dragon NaturallySpeaking to get all my data into the computer as I am paralyzed from the shoulders down, incapable of any other way to the data. When I click on a link that would be for YouTube or other types of media devices, Firefox and Dragon NaturallySpeaking will lock leaving me place the Creek without a paddle. Short of abolishing the use of Firefox as my default browser, I am open to all suggestions that you may have because Microsoft Internet Explorer is a program that I can't stand using and I use Firefox since its inception and I like except when it crashes.

  Thank you very much and I am open to any suggestions you might have before uninstall DNS because it is a must.

  Bruce

  I noticed a similar problem, which began occurring only recently. If I'm dictating in Firefox use Dragon NaturallySpeaking 8, if it consists in the search bar or in a Gmail e-mail window, Firefox can lock up without warning. The only way I found to recover the problem is to close with force Firefox using Windows Task Manager.

  EDIT: this error message titled 'dd10edit' might be relevant - "COM returned an unexpected error code: details are HOOKERR_CONNOTINJECT.

• Some problems with Toshiba 40LV933G using the Serbian language settings

  Hello

  I have Toshiba 40LV933g TV a few months already.
  The firmware version is finally a 1.00.08.
  And I have some problems with it, which I think can be corrected in some of the new firmwares (if there is one).

  First of all, when I select Serbian language 'Move' in media player is not translated.

  Secondly when I select the Serbian country in the menu I can't automatically scan for DTV and ATV ATV just of channels.

  Third and the greatest problem is medial Player do not support these last Serbian latin in subbtitles as:? šŠ?? žŽ
  and there is no possibility of changing the size of this last subbtitle. Things like this other brands are already supported.
  * also the time between changing channels is long enough *.

  Best regards.

  I noticed the same problem with subtitle on my TV Toshi when I use the media player (movie recorded on USB key). These Latin letters are not displayed correctly.

  I also hope that this can be corrected with new firmware.

  By the way: do you know where you can download the latest version of the firmware?

• Deal with failure when using LabVIEW 2011 and DSC MODBUS communication

  I'm currently reading from operating records a PLC with MODBUS/TCP. I confirmed that the PLC will update the values and in response to a MODBUS communication correctly by using a third-party program called Modbus Poll. However, when I try to query the PLC using the LabVIEW shared variable engine, I am unable to read the values of the same addresses that I consult with Modbus Poll.

  My installation is simply to a PC directly connected to the controller via Ethernet without a router between the two. I'm using LabVIEW 2011 SP1 with the DSC module.

  I opened the Manager of distributed systems OR to display the State of all variables in the Modbus Library that I created, and I noticed that the ILO CommFail permanently the value 'true '. All other variables with a 'read' access mode signal "failure of process". I tried to restart the process and stop and start the local variable engine without success. I also restarted my computer several times to see if any services did not exist, but this does not appear to have solved the problem.

  Finally, I resorted to listening to communications on the network card I have the PLC connected via Ethernet using Wireshark and found that while Modbus Poll communicates with PLC, number of MODBUS and TCP packet is sent and received. However, when using only LabVIEW or the DSM OR communicate with the controller, there don't seem to be any communication on the network card.

  Something that may be interesting to note is that I could communicate with the PLC and to read values with the DSM just once, when I understood everything first what address I should be reading of. All of this has stopped working shortly after. Prior to this, 'CommFail' was not generally set to 'true' with my current setup. Thinking it was my firewall, I have since disabled my firewall, but this seems to have had no effect on the problem either.

  Any help on this would be appreciated.

  So, I thought about it. It turns out that the IP address of the server i/o MODBUS must be set to the address of the MODBUS slave, not the local computer. The address of the i/o MODBUS server is defined by the navigation in the Explorer window projects, expanding the variable engine shared library for MODBUS and right click on the server MODBUS (for example Modbus1) item and select Properties.

  In addition, the addresses seem to be shifted by + 1.

  Thanks for the tip so.