problems with change of password

Similar Questions

• Problems with "" change in "in Lightroom 4"

  I just installed Lightroom 4. Problems with "change in ' under 'PHOTO', when I select a program to edit photo in I download a message error - ORDER of EXECUTION ERROR INATTENDUE: bad argument #1 to 'down' (string expected, got the draw). I tried uninstalling and reinstalling, still have the problem. Any suggestions?

  Thank you

  http://feedback.Photoshop.com/photoshop_family/topics/lr4_external_editor_failure

  Frans

• I have problems to change my password. When I go to the screen to change it refernce keeps going back me to an old AOL address, what can I do

  I can't change my password.  When I go to the screen changes and follow the prompts it returns me back to an old AOL address

  Hello

  ·         What password, you try to change?

  ·         AOL password account are you referring?

  If you try to change the password for AOL, you can follow this link & check if the problem persists.

  http://help.AOL.com/help/microsites/microsite.do?cmd=displayKCPopup&docType=kc&externalId=223103

  Hope the helps of information.
  Please provide us with more information about the issue so that we can help you further.

• Are there problems with changing the IP address of a system of v5.3 ACS after the initial Setup?

  I'm migrating from ACS v4.2.1 to v5.3.  I want the final v5.3 system to assume the IP address of the machine 4.2 of origin so I don't have to change any configs on network devices.

  Are there problems with the change of the IP address of the system AFTER the initial installation v5.3?

  I tried without problem. I changed the ip address of the WLC several times.

  You must ensure that:

  1-) you change the switchport accordingly to the appropriate vlan if the new ip address belongs to a subnet of a vlan different.

  2-) make sure that all clients AAA configured to use the new IP address of the ACS servers.

  Here is the procedure how to change the ip address of the interface (according to the doc of cisco):

  http://goo.GL/0BYqVT

  I also changed parIP normal address and it works. but of course, the server must be autonomous before doing this step (i.e. no secondary ACSS registered to him and he is not on the other ACSS in a distributoin).

  HTH

  Amjad

• I have a problem with deleting a password of a program in IBM lotus 123.

  Original title: IBM Lotus 1-2-3

  I'm under Lotus 123 97 on Windows 7.

  I'm having a promlem remove a PASSWORD in a program.

  I, ve been on SECURITY, then on RESERVATION, but from there I met problems.

  Any suggestions?

  Hello Norm,

  Welcome to the Microsoft community where you will get the best solutions for Windows related problems.

  I understand you have questions, remove the password of IBM Lotus program. The question you have posted is related to IBM Lotus and would be better suited to IBM Lotus support.

  I suggest you to check with the support of IBM Lotus for more information.

  http://www-01.IBM.com/software/Lotus/products/123/

  I hope this helps you get the password removed. If you have problems with Windows in the future, please post in the Microsoft Community.

• Problem with changes saved in files Excel download (APEX 3.2.1)

  
  Hello community,

  I have a Table and store Documents in there.

  I would give a link for users to open a file downloaded Excel, make changes, save them and finally to close the file.

  Unfortunately, the changes are not saved.

  I think it's a problem with the privileges. But those that need me?

  When I go on ' save under ' in a file Excel open, the owner is "Apache IO" and I don't have any directory on the server to save.

  I hope someone has a solution

  Thanks in advance

  JO

  Before you create a shared directory (this is not a DBA, but a sysadmin task incidentally) and a background process, you need to specify what and how you want to do something first. Maybe a shared directory is not possible (for example in the case of a Web application). Talk to your system administrator before you build anything.

  Even with a shared directory, you must do a lot more than just put a file there. If a user saves a "myfile.xlsx", but what to do with this file? Is he related to something, such as a purchase order, the invoice, the project...?

  Maybe you have seen the document management systems where you open a file in the application and save by clicking the Word or Excel records. But these are based on plugins, Office and other software installed locally on a PC.

• Problem with changing password to adapter

  Hello
  We need to change password user IOM after AD account creation. I use following my adapter code:
  
  * public class PassswordGenerator {* +}
  
  Public Shared Sub NewPassword (String usrID, boolean isUserLogin) throws all AccessDeniedException,+.
  NoSuchUserException,+.
  UserLookupException,+.
  SearchKeyNotUniqueException,+.
  * UserManagerException {* +}
  
  UserManager userService = Platform.getService (UserManager.class); +
  User user = userService.getDetails ("User Login", usrID, null); +
  RandomPasswordGeneratorImpl randomPasswordGenerator = new RandomPasswordGeneratorImpl(); +
  char [] nouveau_mdp = randomPasswordGenerator.generatePassword (user); +
  Pass string = new String (new_pwd); +
  System.out.println ("new password:" + pass); +
  userService.changePassword (usrID, pass.toCharArray (), isUserLogin); +
  
  *}*
  
  *}*
  
  
  but when I try to perform tasks on the user ad process I get special suite:
  
  java.lang.reflect.InvocationTargetException
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  +........+
  Caused by: oracle.iam.identity.exception.UserManagerException: the password change operation failed.
  at oracle.iam.identity.usermgmt.impl.UserManagerImpl.changePassword(UserManagerImpl.java:3027)
  at oracle.iam.identity.usermgmt.impl.UserManagerImpl.changePassword(UserManagerImpl.java:2962)
  at oracle.iam.identity.usermgmt.api.UserManagerEJB.changePasswordx (unknown Source)
  +........+
  
  I need to change my code to use OIMClient? Password is generated according to the password policy, I can't test my external customer code, so I have no idea what is wrong.
  The best
  MP
  
  Published by: J23-2012-05-28 04:12

  Approach is very good. You can call the task of password change to the success of creating the task from the user.
  You can have a simple code like this:

  Import oracle.iam.passwordmgmt.api.PasswordMgmtService;
  public String changePassword (Long usr_key, String password) {}
  UPOS tcPasswordOperationsIntf = Platform.getService (tcPasswordOperationsIntf.class);
  upos.setXelleratePassword (usr_Key, password);
  }

  I hope this helps.

  Kind regards
  GP

• How to solve the problem with the Gmail password that worked before and works online?

  1 thunderbird worked very well with my Gmail account for months, then was unable to send a message, but can still receive messages.
  2. I asked me to re-enter my password and it has not fixed the problem.
  3. I went to Gmail online and connected to verify that my password has not changed. Success.
  4. I have reset password in Thunderbird, but still could not send test message to myself.
  5. I deleted the account in Thunderbird. I then added a different Gmail acct that wasn't in Tbird. Success. Then I sent the test email, success.
  6 then I added the original Gmail acct, failure! He finds the correct settings automatically, but when he tried to check the password, it failed. I repeated to enter the password several times but always failed.
  7 WIN7 64 bit HP, Tbird 24.4.0
  8. all other AOL accounts work fine on Tbird.

  Authentication using two-factor with this account? and ask for passwords? as it seems!

• Satellite Pro 4280 - problem with the BIOS password

  Hello
  I decided to revive my old laptop Toshiba SP 4280 but failed to get the system because he wants me a passowrd initially.
  I have tryied to get out a map of Moser for 24 hours battery - but it did not help.
  I tried a few passwords backdoor, like Toshiba, toshy99, but it did not help.
  I've successfully upgraded BIOS the most recent a 2, 70-TRAD, but again he asks me a password.

  Could you help me please with this problem?
  What can I do?

  BTW, I can't get into the BIOS Setup and select the source of loading (Hard, FD or CD) because I have to enter a password first.

  Thank you very much!

  Hey,.

  Unfortunately, I don't think that an authorized service provider can help you get rid of the password because they have special tools to do and how to do it. Maybe some jumpers must be defined, but I put t know

  On the Toshiba Web site, you can find a list of aspic call them and ask for help, all that s! ;)

• problem with changing the order of tab on tab control

  Hello

  I am aware that the same question has been asked over three years - but I can't yet find the problem in what I'm doing...

  Description: I have two controls tab, A tab with three tab and tab B with two controls on a Panel. For the following discussion, tab B is of no interest. Each tab control has several numerical indicators, of type integer and double. Now, I want to add a fourth tab control to A tab. This method works.

  Following and problematic stage, in the Publisher of the IUR I select the new tab (most right) and move two positions to the left. It's still ok until I try to display a numeric value of order of tab 3 (the new tab control is left to it). I get an error in calls to SetCtrlAttribute, complain about an invalid control ID... However, I didn't touch any control over the tabs, or add a new control. In addition, I did not touch the generated include file... Visual inspection did not show any changes in the include file (the new tab control is listed only when certain controls are added)

  Posting numbers on the first/far left tab control work only on 3 and 4 which are suitable for the new (and still empty) new tab will generate this error. Adding a control to the new label does not change the bahavior.

  Help is appreciated!

  Wolfgang

  Wolfgang,

  When you get the handle for your tab using GetPanelHandleFromTabPage:

  GetPanelHandleFromTabPage (MainPanelHandle, PANEL_TAB, 0, & TabHandle);

  the third parameter is an index for the specific tab you want to address.  If you change the order of the tabs, you can change the index, too.  For example, assume that you have a digital control on the third tab from left to right.  You want to assign some value, so this, you:

  GetPanelHandleFromTabPage (MainPanelHandle, PANEL_TAB, 2, & TabHandle);

  SetCtrlVal (TabHandle, TAB_numMyNumeric, 1);

  Now, you add a new tab to the left of the tab with the digital contorl.  The new tab is now index 2 and the original tab is index 3.  When you call:

  GetPanelHandleFromTabPage (MainPanelHandle, PANEL_TAB, 2, & TabHandle);

  you get the handle to the new tab.  There is a control with the same ID as TAB_numMyNumeric, so that you get a runtime error.

  Personally, I like to use an enumeration to my tabs so I can keep the lines:

  enum {MY_FIRST_TAB, MY_SECOND_TAB, MY_THIRD_TAB,...};

  So if I redesign the tabs or add a new one I just re - order enums and everything works fine.  Also, I used the same names in my constants of tab, to help keep things straight:

  GetPanelHandleFromTabPage (MainPanelHandle, PANEL_FIRST_TAB, MY_FIRST_TAB, & TabHandle);

  Tony G.

• WRT54GS - problem with changing the router IP

  Here's my problem: I want to change the IP Address of the router (and subnet) to 192.168.1.1 to (for example) 192.168.28.1 (long story).  I can do it on the base of the router configuration page.

  I have a desktop with a fixed address configuration: 192.168.28.90, subnet mask 255.255.255.0, default gateway and preferred DNS server: 192.168.28.1.  Three laptops get dhcp addresses.

  Access to Internet is fine, but local communications on the local network no longer work: shared folders are not accessible, and I can not ping to one local PC to another. (But I can ping anything on the web)

  When I'm back at 192.168.1.1 all is well again.

  Someone at - it includes what is the problem?

  Thank you.

  It is most likely a problem of computer software firewall.

  To resolve the issue, reset the router to 192.168.28.1, then power cycle your network, verify that your Internet connection works on all computers.  Then go into the computer on each computer software firewall and set it to "trust", other computers on your network.

• Problems with changing colors

  As far as I know, I'm running Vista Basic and Aero for my color scheme.  Don't know which, it seems not switch back.  in any case, I would like to change the color of my windows, but when I go to the customization and windows color and appearance, it is just straight up with the appearance settings.  I made sure that I have all the requirements (as far as I know)... I am running Home Premium and have 2 GB.

  Can anyone give me any help on how to solve this problem?  If you could, it would be appreciated!

  Thank you!

  You click Advanced in the appearance dialog box to get the color settings.  NOTE: Depending on what theme or settings you used in appearance, the color you select may or may not apply - it explains that where you set the colors.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem with change of speed on Twixtor Pro

  Using Twixtor 5.0 and After Effects CS6 and I am faced with a situation where keyframing speed % change causes the slow images to freeze for several images at once.

  What works:

  1. Drop clip in the new model
  2. Activate the time-remaping and increase the length of the model of a good minute or so longer than the source element
  3. Add Twixtor Pro to clip layer (seems to behave the same if you drop this model into another clip and apply to one)
  4. Set the frame rate to match comp (and extracts)
  5. Other low value, such as 5% % of the speed .

  Clip plays back nice and soft and slow, each picture is interpolated.

  What does not work:

  1. Repeat the above steps... up to 5
  2. Set a keyframe speed 1000%
  3. Playhead ahead before a second, set another keyframe to maintain speed
  4. Move several frames, keyframe speed 5% value

  When I have the clip, after the last change of speed, instead of a nice smooth movement, playback, I get a still picture, then several identical frames, then he jumps again to the next incremental image and so forth - with NO smooth interpolated images. The result, as you can guess, is very jerky.

  If you trash all keyframes and simply leave the speed change to 5, he plays completely smooth. Which is just great, except for the fact that I really want to animate it.

  If someone has encountered this?

  In the backup interval, I use Timewarp, but I'd love to address this issue.

  Hi Rick, I appreciate your persistence to help. It is certainly another way to use the plugin I have ever used in the past, but does not eliminate the need to activate the time-remapping. Certainly not as common as the majority of the tutorials out there, including the Re: Vision.

  Purposes of the argument, I tried this approach, but unfortunately the problem persists. Out of curiosity, there are specific problems that you avoided using the method solid vs apply directly to images?

  If I can dig up my serial number, I'll install the CS6 update following the instructions. I will definitely update this post if I get positive results.

  UPDATE:

  I am pleased to announce the upgrade to 5.1.5 solved the problem!

• Problem with changing photos in the live App Photo tile.

  Original title: remove tile App.

  Hello!

  "Please tell me how I delete this image of my" ""Start " of the Photos app. Now my photos app status is ' activate live tile " , but does not properly.

  Hi Malik.

  This problem could occur due to these reasons.

  1. If the application is not configured correctly.
  2. If the application settings are incorrect.

  Try the steps listed here and see if it helps.

  Method 1:
  I suggest you try the steps to put the Photos of tiles. Check if it helps.

  1. From the home screen, open the app photo.
  2. Go to the photo that you want to use and tap or click on to open it.
  3. Swipe in the bottom edge to see the commands of the app.
     (If you use a mouse, right-click in the application.)
  4. Press or click on set asand then press or click the photo mosaic.

  Next time you go to start, you tap or click on this picture to open the Photos app.

  Method 2:
  If the problem persists, I suggest trying the following steps and check if it helps.

  Step 1:
  We will run the troubleshooter app and check if it helps.

  Solving the problems of the app

  Step 2:
  If the problem persists, I suggest you to install all the available Windows updates. Check if it helps.

  See the article for more information.

  Soft pictures for Windows: FAQ

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Problem with changing credit card number

  Hello. I'm trying to change the credit card number, but I can't do so because of a web error. What can I do? Thank you

  Please click Accounts & billing link here https://helpx.adobe.com/contact.html to have a conversation with our billing support team.

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

  https://helpx.Adobe.com/contact.html?step=ZNA_account-payment-orders_stillNeedHelp

  Concerning

  Stéphane