Problems with Compaq 5R5210NX

Similar Questions

• Problems with Compaq Presario 5BW220 RAM

  This office is 8 years old and supposedly supports 512 MB memory SDRAM PC100.

  Recently, I worked on this for my son-in-law.  It came with 64 MB of SDRAM PC100 and Windows Millennium Edition.  I tried to install 2-256 MB memory SDRAM PC133 maximum amount supported RAM, but it refused to start.  I replaced every 256 MB module with a 128 MB PC100 module and managed to do start.  I expected to read 384, but he will read only 256 MB.  I had not all PC100 256 MB modules to use.  I finally installed modules from 2 to 128 MB PC100 and he left like that.

  I never had a problem in the past with an old desk accepting a combination of PC100 and PC133 modules, so it was a first for me.

  The Compaq Presario 5BW220 have a problem with the acceptance of this combination, and she actually says a maximum of 512 MB?

  This could be useful in the future:

  http://www.crucial.com/

  If you click "scan my system" he can tell you all sorts of things on the RAM.

  I have a system built home (with all the paperwork by moving the boxes...) who had a chip spoil.  I could not remember what RAM took it and I didn't go root through the boxes in the garage. =)

  Their scanning system could not see what kind of memory I had, but he told me exactly what my motherboard could support. (Type and max of 1 GB per slot)  He even suggested several configurations of memory.

  Once I saw what he said, he had, I remembered that I had bought before and it didn't fit.

• Problem with Compaq presario V3500

  CurrentY I used Compaq V3500 since September 2008 (before I bought CQ40-308TU, because I am satisfied with the product HP-Compaq). but a few days ago my laptop crash suddenly after (unfortunally) my warranty has expired. After that I can solve the crash and can enter the system, my only detected 1 GB ram (I've been updated in 2 GB). I tried to check and test whetever sodimm died. but after I check the reslt for my sodimm is alive. I found later, the problem is on the socket to sodimm, a socket is dead. as my warranty has expired, I tried service to General laptop Service Center. but they also abandon this case. They suggestion is to change the motherboard with new ones, and it will be quite expensive. could someone suggest another option to solve this problem without replacing the motherboard with the new? or what was already a general problem for user V3500 early? (maybe v3500 is a product of the failure of HP-compaq?)

  With a dead memory slot, your only option is a new motherboard. Yes, the whole V3000 is a cousin to the Pavilion dv6000 line which was not an interpreter that is remarkable to say the least.

• Problems with Compaq Presario SR5830AN Moses

  My mouse, but that came with my office worked fine, now becomes jerky while on prospects, but that works perfectly in browsing the internet.  Any help would be appreciated as the parameters appear well i.e. scrolling = 3 lines.  It seems that there is a delay when scrolling in email only.

  Hi Chris,

  Search on the website of the manufacturer for an update of the mouse driver.

• Problem with compaq 6910p

  well, I have win xp professional version 2002 SP3 installed and my quick lunch buttons do not work (ctr + alt + delete, ctrl + a keys fn etc.) btw I have hp quick lunch buttons version 6.40 C2.       Any suggestions how to solve this problem?

  Configuration of the BIOS (the system - device configurations configuration) watch if you have enabled

  'Change the functions of the fn key and the left CTRL '.

  If yes your Joanie right CTRL works as the key ctrl, but not the left that shoudact like the fn and the button fn should act as ctrl.

  Pekka

• Problem with the Compaq Presario CQ60-216DX

  Hello, I'm having a problem with my NEW Compaq Presario CQ60-216DX mother. Every time it boots up vista and I run internet explorer, I get a strange blue screen which exports a file memory and reboots.

  I have the feeling that this might have been caused by a virus, but I can't do something, because Vista can't reformat long for some reason any.

  I tried a hard test in my motherboard and he said that there is something wrong with my hard drive.

  I don't know what is happening, right now I'm in safe mode trying to find viruses that Nod32 does not detect everything.

  Can someone tell me how I can get either the Windows XP Discs to work at startup (which, for some reason, they do not), or an alternative to a long format?

  Is there a way to fix this without reformatting? There's almost nothing on this laptop anyway so I'm always willing to do. A regular format has done nothing to solve the problem, I did it with Ubuntu and it did a quick format, but I had no problem with Ubuntu. Then I reinstall Vista and I am constantly having problems with a blue screen of death.

  Someone knows how to fix this?

  The Chemich does not exist

  If you want to do a reinstall of Vista then press F11 continuously during the boot upward. This will bring you in Recovery Options were you can choose to restore the system in the same State as when it was purchased. But if, as you suggested, is that a problem of hard drive reinstall won't help.

• I HAVE COMPAQ MINI 110 HAVE A PROBLEM WITH THE PASSWORD OF PIOS. SYSTEM HAULT CODE IS; CNU9243TDY

  I HAVE COMPAQ MINI 110 HAVE A PROBLEM WITH THE PASSWORD OF PIOS.

  SYSTEM HAULT CODE IS; CNU9243TDY

  ways to help

  Hello

  Try to enter: e9lo7vfati (3rd character is a lowercase L)

  Kind regards

  DP - K

• Hey I had a problem with my compaq cq62

  Well this is saying me tha theres no drivers on the pcwhen I try to program it, but on the screen after the compaq sign spell he found bootablr device. Insert a bootable CD, then press to continue, can I get help on this

  No boot device would mean that it cannot read a boot sector of any of the devices detected by your machine.  This could be because the hard drive is bad, the boot sector is damaged or you let a non bootable DVD/CD in the drive.  You can enter the bios and see if you have all of the hard drives listed or recognized by the system?  My best guess is that you have a problem with the hard drive.

• Problem with the Compaq 6715 network s

  Dears

  I have compaq 6715 s running windows XP SP3

  I have a problem with my network connections, whenever I am connected via the LAN port Ethernet, wireless connection is automatically disabled and I can't enable it.

  is this normal or should I do something to use both connections at the same time to connect to two different networks.

  Thanks in advance for your support

  Hello:

  This is perfectly normal, and you can fix it easily also.

  Go into the BIOS and in the sub-menu of device configuration, modify the LAN/WLAN, set active to disabled.

  Save the setting it by hitting the F10 key and again when you go out (save the settings and exit).

  Now the wireless stays on when you connect by using a LAN cable.

• Compaq Presario CQ 57-339wm: windows 7 32/64 repair restore DVD, it can solve problems with HP CC 57-339wm notebook

  Recovery Windows 7 32/64 bit, repair, installation DVD. It can help to solve problems with my PC. If so, how?

  marinee4

  Yes - it's a problem that I heard that HP only retains the support of recovery for five years.

  A few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• problem with my laptop asking for the administrator password or power on password

  I have the same problem with my laptop asking for the administrator password or power on password. It is a compaq presario cq61. It happened when my hard drive failed and was not used for a long time. With the password, any help would be much appreciated. It says system turn off after a few trials with the key: 55427586

  Hello

  Try to enter: 40585508

  Kind regards

  DP - K

• Problem with Internet

  Hi guys, I have a laptop Caompaq Presario CQ61-313us and I just installed windows 8.1, then I realized there was a problem with my Internet, every time, I opened a website, I always get either a page like this: http://imgur.com/0DtvP9X.png , or I get "error: Gateway Timeout", if I can get on the site if I update a little time , but it is extremely slow. In addition, I can't download anything, I tried to download the .NET Framework 3.5, through windows Update and Windows features, but in vain. I think this proves that the problem is not IE. I also think that it's the fault of the wireless driver, but I don't know, and I don't know which driver to download. I tried to update starting from the meny of properties, but he says that it is up-to-date. My wireless adapter is Qualcomm, Atheros AR9285 802. 11 b | g | n, V3.0.1.155.

  Can anyone help?

  Update: I think it is worth noting that when I download with utorrent, it downloads normally with my speed of regular download, but to share it, I can't download anything.

  Hi Abdoice,

  Thank you for your request, I will do my utmost to help.

  I understand that you have improved your laptop to Windows 8.1 and now you have problems of WiFi connections.

  HP has not tested your unit with Windows 8.1, so this could have unknown results.

  If you try another browser is that the same problem?

  You did all your Windows updates?

  Have you tried running the built in Windows 8.1 troubleshooting tool?

  Press the Windows key + C to open the charms

  Troubleshooting Wireless type in the search bar and press ENTER.

  Follow the instructions on the screen.

  Here is a link to the Qualcomm Atheros Driver Downloads page to search for an updated driver. Atheros drivers Download Center

  Please note that under the compatible software it does not list Windows 8.1 but only Windows 8.

  I can suggest only you try.

  There is an update of your system bios on the HP driver page, has it been done yet?

  Drivers for laptop PC Compaq Presario CQ61-313US

  Updated the BIOS

  Here is a link for troubleshooting wireless network and Internet (Windows 8)

  Here is a document on download or update of software and drivers for HP computers.

  You can omit the HP Support Assistant, it will only search updates HP and there is none for Windows 8.1 as stated previously and also the Manager of recovery for the same reason.

  I hope this has helped.

• Problem with the brightness of the display in my 655 - WINDOWS 7 HP laptop

  Hey there!

  I have a problem with my laptop HP 655. When I press the buttons to increase or decrease (exactly F2 and F3) they do not respond, these buttons do not work. I tried to install an UPDATE "HotKeys Support HP drivers" but they does not solve this problem. I installed all the drivers that were available for my laptop, but the same problem again. If anyone can fix it please ANSWER?

  ProductName: HP 655 Notebook PC

  ProductNumber: B6M65EA #ABD

  OS: Windows 7 Home Premium 64-bit Service Pack 1

  Thank you

  BujarA.

  P.S. This thread has been moved from Community Feedback & suggestion to the moderator of Forums HP laptop - HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE.

  Hi all

  This problem was solved by upgrading the BIOS released by HP two months ago.

  Thank you

  BujarA.

• Problems with sound after you install the operating system

  I have a compaq presario that originally vista os, the system crashed and I could get the recovery work so I installed windows xp and now I'm having problems with the sound. What should I do? I tried to locate the drivers requarding info. I keep getting error messages indicating that I have no audio device. Is it possible to go back to vista? I don't have an instillation cd or recovery for vista cd. Any help would be great.

  Hello

  Go to the link drivers HP > search your computer number model > XP OS > download and install the audio drivers.

  http://WWW8.HP.com/us/en/support-drivers.html

  If no audio driver XP is available, HP provides them.

  Through the installation of XP, you have destroyed the provided HP recovery Partition Vista to reinstall Vista:

  Solve a common problem of recovery with the HP Compaq computers.
  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be started from either the desktop or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.
   
  Contact HP and ask them to send you a set of Vista recovery disks.
  Normally, they do this for a small fee.
  http://h20566.www2.HP.com/portal/site/hpsc/public/help/contactHP/home/?AC.admitted=1340446095470.876444892.199480143
   

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Problems with picture Screensaver.scr and MSCVR100.dll

  I am running Windows Vista Home Premium on a 32-bit system on an HP Compaq PC.

  Following automatic updates from Microsoft and ATI Radeon, I get an error message when my PC is trying to activate the screen saver.  The screen saver is set up through my library of images and had worked perfectly for four years before the recent updates.  The error message at the start says:

  PhotoScreensaver.scr impossible to locate the component - "this application has failed to start because MSCV100.dll was not found.  Reinstalling the application may fix this problem. »

  Perhaps foolishly, I then bought what I thought, it was a problem of DLL - files.com, a trade name of Cleverbridge.  He said it had corrected flaws 1 200 on my PC (!), but it has not cured THE fault and the following error message:

  Problems with Photo Screensaver.scr - Bad Image: "MSCVR100.dll is not designed to run on Windows or it contains an error.

  I uninstalled the stuff of DLL - files.com and I searched for a solution on Microsoft Answers.  Depending on experience and advice previous users, I uninstalled the previous Visual C++ Redistributable update packages and the ATI update and installed the redistributable Visual C++ 2010.  No improvement.

  Then I tried to restore my PC to a date before the problems, but the restore function did not work and reported that she had failed for undisclosed reasons.  This has happened several times, no matter what point restoration that I use.

  I'm not particularly computer literate, so would like some simple tips on how to cure this.

  Thank you

  Hello

  I suggest you to install the Microsoft Visual C++ Redistributable dll, which is necessary for the projects generated with Visual Studio 2010.

  Download files according to your operating system version. I suggest you to install all the versions as they may be needed for different programs. Check in programs and features, is what shows you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)
  http://www.Microsoft.com/download/en/details.aspx?ID=5555

  Package redistributable Microsoft Visual C++ 2010 (x 64)
  http://www.Microsoft.com/download/en/details.aspx?ID=14632

  I hope this helps.