Problems with eprint

Similar Questions

• problem with eprint

  I bought a new HP Photosmart 5510 printer to use for photos of the iPhone 4, only whenever I try to use eprint service, I get a message my email that the picture quality is not good enough and the print job has been canceled.   Can not know how to solve the problem.  Does anyone have an idea?

  Hooray!   who did it!     Thank you very much!!!

• Problem with connection for ePrint

  Hello
  
  Today, I brought a new printer - all in one, HP Deskjet INK Advantage 3520. All functions are OK, but I have a problem with ePrint.
  In practice, the printer is connected to my wifi at home and I can print without USB cable with no problems. But when I want the ePrint of installation function, I get an error that the printer do not have any internet connection and I can't complete the configuration of the service.
  
  Do anyone know how I can eliminate the problem?
  
  Thank you
  Denis

  Hi DenyKr,

  I see that you are having problems with your printer, connecting to web services.  I would like to try the following steps.

  1. open the internet browser type printer IP address.

  2 should bring you to the status of the printer page.

  3. Select the tab network at the top.

  4. left side select IPv4 under wireless.

  5. under DNS address Configuration select manual DNS server.

  6. for favorite enter 8.8.8.8

  7. for alternate enter 8.8.4.4

  8. Select apply. You can get a warning saying that this could break the connection which is very good.

  9. turn the printer off for about 30 seconds, then try again.

  Let me know how it goes.

• Problem with alert printer after you set up eprint

  I've just set up my HP eprint/connected to my printer HP Officejet 6700 account. I went through all the instructions and generated a code for me to record my printer. My printer came but I noticed that I have 2 alerts next to the printer which has been recorded. The alerts are:

  • Online
  • Problem with printer

  When I click on the message of the latter I get the following message

  • An unspecified problem was reported. Please check your printer.

  See the front panel of the printer for more information on the resolution of this condition

  I checked the printer, but it is not showing problems. I have however deleted the re-recorded new printer and web service. This time he seems to have solved the problem, but when I went back to the account later in the day the alert reappears.

  Could anyone help in this case.

  Hi BillyBoy59,

  Welcome to the HP Support forums.  I understand that you are getting a message "Problem with the printer" in connected HP.

  Connected HP sometimes gives a false report that there is a problem not specified with the printer. HP has been able to reproduce the error.  If there was a genuine mistake, the message would point to the problem (low on ink, paper, etc). Unspecified error message does not prevent you to use ePrint.

• A good difficulty for problems with creating an account ePrint Center.

  Problem: impossible to register with ePrint Center

  Difficulty: The problem you are having is probably due to an old Snapfish account registered to your email address. ePrintCenter and Snapfish account information is stored in the same place and I saw this before conflict.

  You will need to go to http://www.snapfish.com/snapfish/welcome, click on "Sign In" in the upper right corner of the page and then click on the 'forgotten password' link and enter the email address that is causing your problems, you should receive an email from Snapfish, which allows you to create a new password. Once you have created a new password for Snapfish, try to Sign In on ePrintCenter (http://www.eprintcenter.com) using your email address and the password you created for Snapfish.

  If you have any other questions do not forget and let us know. We're here to help.

  If I have SOLVED your problem, please do not hesitate to provide LAURELS and make sure that you mark this thread as a SOLUTION OFFERED!

  Although I work for HP, my messages and responses are my own opinion and not of HP.

  In addition, if the fix above does not seem to solve the problem or if you are unsure if you have a Snapfish (http://www.snapfish.com) account, use the e-mail address you want to use with ePrint Center (http://www.eprintcenter.com) and then use the information that you created and try to "Sign In" or create an account on ePrint Center.

• LasrerJet P2015n: Low error when printing with ePrint to a LaserJet P2015n on iOS supplies

  "Hi, I'm using the HP LaserJet P2015n, which works very well, however try to print using ePrint on iOS 8.3 seems to cause problems. If the application finds the printer on the network, and try to print, it invites a mistake "we have detected you are low on supplies error" obviously is not the case, because it is more than 50% of the full and prints very well using the desktop computer. The printer error LED keeps blinking and won't not even respond to a request for printing office. It must be restarted to work again.

  Tried all kinds of reboot and reset. I also tried to find a solution with no luck, there is no updated firmware for this printer can be found as well.

  Any help will be very appreciated!

  @hussain316

  Thank you, based on the information you provided... the p2015 is not taken care of with ePrint. That's why whenever you send a print job for printing, the printer responds with error messages and you have to pick up then power cycle the computers can be printed successfully on it.

  If you want to start mobile printing, then you will need to upgrade to a new printer with function ePrint. Depending on your price range, the new m277 is a nice little printer and has this ability.

  Sorry

• My office print 8600 ProPlus will not print pdf files sent from an iPad with ePrint.

  My office print 8600 ProPlus will not print pdf files sent from an iPad with ePrint.  I just get an error message when I go to the HP Eprint centre.  It prints the address email of the coverage, but nothing else.  The attachment is not sure that I can see.  I tried to send an attachment from my Mac and worked well.

  Thank you for your response and I am sorry for the delay to return to you.  I tried save the Pages document in a Word document and send it to the printer using ePrint but it is even.  That is to say the handout printed but not the attachment.  However, when we removed the accompanying document and sent the attachment in its own it has worked well for we have managed to solve the problem. Thank you very much.

• HP 5520: Account problem access Eprint

  Hi all

  I am writing because I have a problem with the ePrintCenter website. I forgot my password for access to and when I start the recovery of password procedure, the site gives me this message "Server Error".

  How can I enter my ePrintCenter account and change the settings of my printer?

  Thank you

  Dario

  Hey @Dario_81,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see you are trying to recover the password for your account Center ePrint. I can help with that.

  For starters, ePrint Center was converted into a new site called HP connected. If you click this link, click on Sign In at the top left and I forgot the password, and then allow you to reset your password. If it isn't, then we try another browser. Safari in particular has a lot of trouble with Flash for Firefox or Chrome should have any other questions. If you still have questions then reboot your PC and try again, or otherwise try to reset your password by using a different device.

  If after that you are unable to reset your password, then I would contact HP Cloud Services. You can do it by appellant 1-855-785-2777 between 08:00 and 10 EST from Monday to Friday and Saturday from 09:00 to 8 a.m. EDT.

  If it helps resolve your problem then please let others know by clicking on accept as Solution below my post.
  
  I hope this helps and I hope you have a nice day!

• HP Envy 4500: Problem with WIFI printing

  WIFI printing worked both MacBook and iphone. Then stopped. Was able to print e-mail with difficulty. Implemented AirPrint, but always had problems. Finally got Apple Support help me in removing the AirPrint service and return to the regular WIFI printing. I am now able to print from the MacBook, but my Iphone says "No. Found AirPrint printers". How to reset iphone to locate the printer?

  Hi @savelad,

  Please become a member of the HP's Support Forums. I understand that you have a problem with printing from your iPhone. I'll be happy to help you.

  I can not help you reset your iPhone, but should not have to.

  May iPhone airplane mode is off.

  Make sure the iPhone is on the same network as the printer.

  Test print.

  HP also has a great app for printing from the iPhone app HP Eprint.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Connected HP OfficeJet Pro 8600 Plus status reads "problem with printer."

  I could just ePrint on an OfficeJet Pro 8600 Plus replacement and them have not used for printing yet. I was in the devices page to manage the settings and change an address for one of my devices. The newly added column 8600 State reads 'Online', but also 'problem with printer '. Instructions I was referring to the display panel of the unit for Outlook2003 on the given problem. A check of the display surface showed no information, just a typical home screen. I checked through the display print and found no problems-all functionality is enabled and fully functioning. I checked then the functions of printer in the window 'Printers and devices' of all computers (all running Windows 7 Professional) on the office network. The 8600 are active and full functionality works correctly between the printer and all the computers.

  I then close the printer 8600, left for several minutes, and then lit it back and reconnected. The State says 'Problem with printer' remains in the device window HP.

  I am at a loss as to what this supposed problem can be and don't know what should be a next step. Does anyone have any advice or information that could help in this situation? It would be appreciated. Thanks in advance to those who could help

  HP support responded to my question by e-mail. I was told that the message 'Problem with the printer' is due to a bug in their system. Also said that as long as the status column indicates the printer is "Online" and everything else is fnctioning correctly, don't worry about this.

  I consider that a resolution of the post!

• OfficeJet 6600 - reports HP Connect "problem with the printer.

  I just bought an all-in-one OfficeJet 6600 and immediately installed on my MacBook Pro. Installation went smoothly, and I used it for scanning and printing. I am very happy. However, I noticed that HP Connect reports "Issue with printer." Well, it worked fine, so I ignored the error and continued to work.

  Tonight, I have installed the printer on a Windows 7 laptop. At HP Connect, it is always now reports "Problem with printer." That's it - no further details and no symptoms of any kind of problem. How to diagnose the 'problem' and how to fix it?

  Hi there, I know this may seem illogical, but I wouldn't worry too much about the problem with the printer State message in connected HP. I saw myself sometimes, and I was able to print successfully from a mobile device to the printer which connected HP indicated that there is a problem. Have you tried to send a job by using either the application mobile ePrint or to the e-mail address of printers for the printer in question?

  On the Windows 7 machine, you can also download and run the HP print and Scan Doctor to confirm there is no problem with the connection to the computer on which is installed the software of the printer or the printer hardware. Be aware, however, that the application is compatible with the Windows operating system only, so you cannot run it on the Mac computer, but unless you are having problems printing from Mac to the printer, there is no reason to suspect that anything is wrong.

  Hope that makes sense, but post comes back with other questions.

  Best.

• Sudden issue with eprint & allowing any application or web services

  Hi all

  I have a case with HP and spent 4 + hours on the phone with support eprint people and people of departmental support. Unfortunately, they are now gone for the weekend, and I'm still stuck here with a defective system - and have to leave this weekend on businesses (need a business printer works!)

  I hope someone here can help you.
  I have a x576dw MFP

  Connected to a Netgear router hardwired

  Worked very well with eprint services (set up and printing of daily) for 1 + months

  23:00 last night, I sent several jobs to the printer and I noticed today that they were not there. I checked the print server web printers and find that the IP settings had not changed (of course) when he worked the day before. The same IP address, DNS, default etc. same gateway.

  I ran through all the scenarios/patches that I could find online, to change to the evolution of tests and test with DHCP, changing to wired & test with static and wireless Wi - Fi but a different outside the range of the DHCP IP address, change the router to which the printer is sitting on (I have 3 routers), change the config to link change the primary DNS and secondary only be both addresses from Google (8.8 and 4.4), etc etc.

  ePrint crossed (frustrating) exactly the same steps with me and decided that it was a printer problem. They handed me off the coast for the guys from companies who wanted to do exactly the same steps as for the moment (of course). I did just to get through... (note that I can print correctly on the LAN of all routers), and at the end of technical support told me to try a restore to default settings and start over.

  Do you have this (gr) - same error. When I go to the same activate eprint or apps that it says "Web Services could not be activated". I get the same error on the web interface for the printer.

  Help! IM at a loss total here and HP wants to blame the eprint team, the eprint team wants to blame business solutiosn HP!

  (Other notes... I have checked the firmware, it is updated. I checked also up-to-date web software)

  Frustrated to tired business chick!

  Hey, happy that we were able to work.

  I will contact you on the subject to find the failed unit on your part. We will send to a R & D facility.

• Connected HP - 'problem with the printer '.

  Having not used the 'Apps' on my HP Photosmart 7520e for awhile I discovered that my printer is recognized on logging in HP ePrint, as "one line", but here's a yellow Triangle telling me 'problem with printer.

  My printer functions ok but if I try to use an application (I tried to print the calendar), I get the message "unable to connect to web services. "Cool Internet access and try again.

  I tested the printer by sending a test print of my Tablet and that works fine but Apps simply do not seem to recognize a web connection.

  Quite simply... Out there!

  Hi OnnaBugeisha,

  Thank you for being a member of the community of HP support.  I understand that you are unable to get the applications to connect from the front panel of the printer and you get a message "Problem with the printer" in connected HP.

  Connected HP sometimes gives a false report that there is a problem not specified with the printer. HP has been able to reproduce the error.  If there was a genuine mistake, the message would point to the problem (low on ink, paper, etc). Unspecified error message does not prevent you to use ePrint.

  Regarding applications is not enabled on the front panel of the printer, HP is aware of the problem and working on a solution. It is recommended that you have your updates of product set to automatic on the front of the printer in order to receive the update as soon as it is available. If you wish to discuss with a phone support agent, please call HP Cloud Services at 1-855-785-2777 if you live in the USA/Canada region.  If you do not live the USA/Canada region, please click the link below to find technical support for your country/region number.

  Hewlett Packard technical support

• Center Sign-In or problems Aign ePrint

  Just bought a new printer. After registration and do al work I went to the Cente3r ePrint by following the instructions. I have treid connect with my login to HP. Said it was "forbidden error". Tried to create an account and received the same message. Tried to retrieve a passowrd and it wouldn't connect. When the url appears at the bottom left, it read "o javavoid".

  Why can't I not get an account or connected with HP account in thios area?  Is there a problem with javascript to HP right now or my java scipt is not updated?

  Hello

  Please try to clear your browser cache and try again.  If this does not work, try using a different browser.

• problems with, phone, 6, Bluetooth kit, Nissan, after update, for, Rios, 1.0.2

  After the update to ios 10.0.2 - trying to use bluetooth to call my vehicle, it says: "this article is not in your phone book." How can I solve this problem?

  Greetings, joybelino1!

  Thank you for joining the communities Support from Apple! I can't wait to see that you are having problems with your Bluetooth in your car! The good news is that Apple has a great article that will help you with measures to try to resolve the problem. Read this article to gethelp to connect your iPhone, iPad, or iPod touch with your car radio. Even though he talks about problems with the connection, it also has the steps for other questions you may have once connected.
  
  

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Have a great day!