Problems with maximum scaling

Similar Questions

• Is there a problem with the maximum size of the RAM for Satellite 320CDT?

  I have a 320CDT Satellite with the latest BIOS (v8.00) and Windows 98 Second edition installed. There are 32MB memory base and a 32 MB module in the single expansion slot. If I change it to a plug-in 64 MB I see that 64 MB of total memory reported, not 96 as expected; the specification for the machine indicates that the admissible maximum memory is 160 MB (32 MB base + 128MB expansion). Does anyone know if there is a problem with the maximum memory size for this model and if there is a solution or workaround? I need to know quickly, in order to decide if I should return the memory module to the vendor! Thanks a lot for any help, Peter

  Satellite 320CDT supports an internal memory of 32 MB and a single slot can be used!
  You can improve it to max 96 MB (32 + 64 MB)
  I found a few old memory modules. You can use the modules SODIMM 144 pin EDO PA2043U 32 MB or 64 MB PA2044U

  Greetings

• Serious problem with CPU 'maximum frequency.

  Hello

  I have a problem with my W510.

  I think that this problem has been around since I bought it, or at least for a month or two after I bought it.

  When I plug the power in, or out, it almost always affects maximum frequency of the processor, as seen in the Windows 7 resource monitor, as well as a program called CPU - Z which shows in fact the current speed of the base.

  When things work correctly, the basic speed is slightly more than 3,000 Mhz.

  However, this speed changes whenever I plug the power inside or outside.

  Usually, it changes for the worse when I plug IN power!

  Often, to plug in, the speed drops to about 1 000 Mhz. Then I Plug - and the speed goes back to 3 000 Mhz. Rebranchez_ the - 2 500 Mhz. out Plug - rest on 2 500 Mhz. Plug in French - 1 500 Mhz. out Plug - 2 500 Mhz. Plug in French - 3 000 Mhz. get out - 3,000 Mhz, etc.. Every once in a while, it even drops to 300 Mhz.

  It seems to be arbitrary and random. Sometimes, it takes me 10, 15 and even 20 times connect the power out and back in to run to 3,000 Mhz.

  The machine is new, there is no fan noise, and anyway, the changes are directly correlated to plug and power in and out and that they never occur themselves - is certainly not overheating or something like that.

  Also, I don't think it's a problem with the power itself, as happens to me in different countries and different places, and in any place if I try to re - plug power enough times - it will eventually be resolved (so of course that there is enough power).

  Is there someone who knows this problem? Any suggestions?

  Thank you

  I found that Throttlestop help me with my own problem speedstep. Speed moves much to light use because of speedstep, but when I use a cpu benchmark to load four hearts they set to max speed and do not move. You can give it a try.

  Kind regards

  Fernando

• scaling problems with Windows 8.1 and 3200 x 1800?

  What is the scale of the problems with Photoshop and Illustrator CS6?  I have a hidpi 3200 x 1800 13 '' laptop with win 8.1 and may not use the software because of the text in lower case.

  Thank you

  PK

  Sent from my iPhone

  CS6 is released before HiDpi screens were frequent and there is no adjustment in this program.

  You can try to go to Preferences > Interface and changing the font size of the UI to wide.

  You can also try to lower your display resolution up is decently readable.

  Another step is joining Creative cloud. Photoshop CC 2014 has put 200% across the user interface.

  $50 / month for all applications or $10 / month for Photoshop/Lightroom.

  There are intro and pedagogical offers if you can get over them.

  Gene

• Problems with Clone Tool / Content Aware Scaling in CS4 Mac

  I use PS for about 1 year and a half.  Sort of an advanced beginner.  One of the things I like is the clone tool.  Since I upgraded to CS4 I had that problems with the clone tool.  When I go on an area it shows nothing and him either proceeds with adjustments after a significant delay or it goes black and then comes back with the adaptation.  Sometimes when I'm dragging the brush the whole picture is now replaced by a smear of the color noise.  It really makes the tool unusable.  In many cases, I went back to CS3.

  I also have similar problems with the scale content.  Never been able to make it work.  Basically, some of the best new features of CS4 are worthless for me.  Tried to watch the Adobe solution and search for forums but I didn't no exactly similar problem solutions.

  Any help appreciated.  I have a white 24' Mac Intel with a double frequency of 2.33 GHz Intel Core 2 with 3 GB of RAM.

  Alan

  What you describe looks like a problem with the video card.

  You have successfully updated to 11.0.1?

  Have you tried to disable OpenGL drawing?

• Problem with HD2SD workflow - VirtualDub crashes

  I tried to follow Dan and Jeff HD to SD using HD2SD a workflow. The results are much better than the conversion of the first, but I have problems with VirtualDub that hangs. All components have been installed according to the video of Jeff Bellune (I hope I'm not joking upward).

  My system runs on Windows 7 64 - bit, Intel i7 CPU, 12 GB memory, graphics Quadro 4000 card. I'm still under CS5.03, because I want to finish my current project before the update. I still have the AXIO THE (actuall drivers) installed.

  Here are my steps:

  My pictures is material HD422 and HD - EX from a PDW700 and an EX-3. It is recorded in 1080i50. My timeline is a timeline of Matrox HD1080.

  Step 1. Export MPEG I-frame

  With the help of SOUL I export an image I MPEG clip "Classes - I.m2v" + "Classes - I.wav ' with the following parameters:

  Encoder: Main Concept,

  Multiplexer: none.

  Quality: 5

  TV standard: PAL

  Image size: 1920 x 1080,.

  Frame Rate: 25 fps.

  Field order: top,.

  Pixel format: square,.

  Profile: 4:2:2, level: high.

  Go to maximum depth: off,.

  Flow of encoding: CBR,.

  Senior M/N: 1,

  Primary colors: ITU - R. Rec. 709,

  Use Maximum rendering quality: off

  Question: Are there advantages or disadvantages in using the I-frame Matrox codec instead?

  Step 2: GDIndex

  I now generate the file 2dv ' Classes - I.2dv "with DGIndex. The poster format interwoven with BT.709 Info window.

  Step 3: AVISynth script

  I created the AVISynth script following 'Classes.avs ':

  SetMTMode (2.0)

  MPEG2Source ("Classes_I.2Dv")

  hd2sd (interlaced = true, OutputFieldRate = 50 OutputColorSpace = "RGB32")

  According to the hd2sd info text file, I put RGB32 to encode in yet.

  I also tried to use "YUY2" for encoding with ProCoder 3.

  Step 4: Creating file SD

  I opened 32-bit VirtualDub.

  For "Compression", I select Lagarith, RGB (default), multithreaded

  I opened "Classes.avs" and select "Save as AVI".

  VirtualDub starts coding for a fraction of a second (18 images) and then hangs with kernelbase. I added at the end of this post thread call stack.

  Crash reason: Microsoft C++ Exception unhandled

  Context of the accident:
  An exception occurred in the module "KERNELBASE.

  I am able to make with the SOUL lagarith codec. For testing VirtualDub, I tried to code for the Matrox DV codec. It crashed, too, but this time in frame of 19. I was able to choose uncompressed RGB mode to render with VirtualDub, but it didn't work after the crash lagarith. I had to reboot the system. VirtualDub reboot didn't help.

  Can someone tell me how I can get VirtualDub to work with the codec lagarith or something else?

  Step 5:

  The SD - AVI file with the uncompressed RGB codec seems strong and good, but on fast movements, he seems to have an effect of smear (played with Media player). When I verify with GSpot it shows all the fields above or below. Is it possible that the file has been made progressive? GSpot displays 25 fps. Don't load the file into the first it shows no fields (Progressive Scan), too. I guess that the fields are simply copied into an image.

  I created the file MPEG2 DVD once with Procoder and once with the SOUL of first (I used both the file with RGB color space to limit the work of screening, since the main problem is the sharpness and movement. Hd2sd information file recommended for ProCoder YUY2. I'll test it later.)

  When I drag the AVI file in Procoder she displays fields from the bottom first, but I can choose different options. To maintain the order of the fields of the source material, I chose manually high-field and the aspect ratio of 16:9 source value. As a target, I chose the mastering MPEG2-DVD quality. Here the order of the fields first shows upper field. I can't change the setting in Procoder. The ratio is set to 16 x 9, once again. The result looks good and the movement is smooth.

  I also created a MPEG2 DVD with SOUL of first file to compare. Since the film dialog interpreter showed progressive I turned on manually in the upper fields. The movement resulting is fine, but the picture was fuzzy again! I played a bit with Max Render and Max BitDepth. I have to do the test against. There must be a mistake. It seemed that I had to put one of them to get good results, but it didn't matter which one. Since I have a supported GPU card, it should not matter if Max Render is selected or not.

  Not to mention that Media Player I tried to compare files in VLC, too. In VLC videos generally show more movement, but it could be just deinterlace VLC. Can anyone recommend me a good player? I sometimes give up files first and whatch them on my JVC monitor via the Matrox output to get the best comparison broadcast?

  ----

  I also saw that DebugMode FrameServer is now available in 64-bit. Is this DGIndex workflow has any other advantage that comes from being faster in the sum? I prefer to use the FrameServer it rather than the MPEG-I workflow since it would eliminate the space required for the intermediate file? I can leave the system restore at night when I use it.

  Thanks for any help.

  Marcus

  [Please do not post crash logs]

  Windows UNITED Arab Emirates:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: VirtualDub.exe
  Application version: 1.9.11.0
  Application timestamp: 4d150e35
  Fault Module name: KERNELBASE.dll
  Fault Module Version: 6.1.7601.17514
  Timestamp of Module error: 4ce7bafa
  Exception code: e06d7363
  Exception offset: 0000b 727
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1031
  Additional information 1: 6e2c
  More information 2: 6e2c5b7dda76ef819de36e144d50d576
  3 more information: 9a 96
  Additional information 4: 9a968b4f6589cce1e779aaaf6506f518

  From the hd2sd text file:

  Cultures when necessary for optimum conversion of the format aspects while using all visible pixels.   Normal HD-> conversions of SD, this will crop 14 pixels high and at the bottom of a HD 1080 [10 from a 720 p source] source prior to the scaling

  MediaInfo will show you the color space and the subsampling of the chrominance.

  For the rest, I had simply go with the workflow that produces the results you want.

  -Jeff

• Firefox problem with woocommerce

  Hello
  I hope that your expertiese will help me to solve my problem with firefox. I build my site and intalled woocommerce plug. When the dressage to finalize the sale in the final stage the botton "proceed to checkout" is that just overlap the text in the total amount. I tried remove Google Chrome and Safari and IE browser that gift of these browsers have no problems with it. Only Forefox has some kind of conflict. I contacted the designer of theme and they told me that it's matter of firefox more likelu in conflict with woocommerce. Plese click on the link below and let me know how this problem can be solved to procceed with the release of my web site.

  http://puredayspa.Netfirms.com/cart/

  Kind regards

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
  • Use a type of compressed as PNG or JPG image to save the screenshot
  • Make sure you do not exceed the maximum size of 1 MB

  You may need to add a clear: both rule to this button if the content in floating.

  • https://developer.Mozilla.org/CSS/clear

• Problems with Compaq Presario 5BW220 RAM

  This office is 8 years old and supposedly supports 512 MB memory SDRAM PC100.

  Recently, I worked on this for my son-in-law.  It came with 64 MB of SDRAM PC100 and Windows Millennium Edition.  I tried to install 2-256 MB memory SDRAM PC133 maximum amount supported RAM, but it refused to start.  I replaced every 256 MB module with a 128 MB PC100 module and managed to do start.  I expected to read 384, but he will read only 256 MB.  I had not all PC100 256 MB modules to use.  I finally installed modules from 2 to 128 MB PC100 and he left like that.

  I never had a problem in the past with an old desk accepting a combination of PC100 and PC133 modules, so it was a first for me.

  The Compaq Presario 5BW220 have a problem with the acceptance of this combination, and she actually says a maximum of 512 MB?

  This could be useful in the future:

  http://www.crucial.com/

  If you click "scan my system" he can tell you all sorts of things on the RAM.

  I have a system built home (with all the paperwork by moving the boxes...) who had a chip spoil.  I could not remember what RAM took it and I didn't go root through the boxes in the garage. =)

  Their scanning system could not see what kind of memory I had, but he told me exactly what my motherboard could support. (Type and max of 1 GB per slot)  He even suggested several configurations of memory.

  Once I saw what he said, he had, I remembered that I had bought before and it didn't fit.

• Optical USB mouse problem with Portege R100 on windows XP

  We have three laptops Toshiba Portege R100 currently giving problems with mouse optical usb from Toshiba.

  When starting the laptop, that the mouse is not recognized by windows. Before and after will be identified in the mouse will not respond while Burns led.

  The mouse will be recognized after re - plug in the USB port.

  We have updated versions of bios to the latest version. (1.4)

  Another mouse (USB optical) works OK without problem.

  We have removed the drivers and reinstalled by windows plug-and-play process, but it does not work.

  Is this a known issue?

  Thanks in advance

  Hello
  would it be possible that the USB mouse has high power consumption?

  As far as I know, there are a load of maximum intensity for each USB Port.

  Do you know how much power (intensity) needs to this mouse?

  Good bye

• Satellite Pro C850 - problems with WiFi after Windows update 8.1

  Hello

  I was wondering if someone could give some advice on a problem I have.

  Had an adjustable C850 Pro for a few months and worked well on Windows 8.
  I myself am then harassed and intimidated by Microsoft Update in order to install Windows 8.1 and in a moment of weakness, I succumbed (got sick of the nagging).

  Since that time, my wifi is very intermittent; either I'm on another computer write this and the laptop is essentially not connected to the internet.

  For some reason any (although I didn't try it before), I can not connect via ethernet either, so I think it's probably the driver problems. (I also tried to connect the public wifi but fails).

  I tried to install the driver WiFi Toshiba 8.1 but that has not solved the problem.
  Then I noticed that I'm supposed to install a bunch of drivers in the order.

  Maximum setting to do it, but the first package (associated with bluetooth) said I have to remove the current driver... I try by "turning off", then "Uninstall" but 8.1 seems to re - install automatically and I don't know how to disable this option (I can try to delete the driver file, I guess, but I'm sure 8.1 covered too and will probably launch a drone to try me out ", if I do). *

  Any kind soul there suggestions on a way forward? Pls.

  I see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now. :(

  Hello

  > I don't see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now
  All your problems with the Windows 8.1 update related to the fact that you have not upgraded the Windows 8.1 system as recommended by Toshiba.

  Details:
  http://www.Toshiba.EU/innovation/generic/windows8_1-message/

  Solution?
  Back to Windows 8 (reset the system back to factory settings)
  Then, install all updates and patches for Windows 8 and follow along with the upgrade of system as described on the Toshiba Windows 8.1 upgrade page

  On the page of the Toshiba UE driver, you will find all the instruments that must be installed in the correct order and Windows 8.1 driver!

• Problem with the software Modem on Satellite Pro L40

  I tried to set up a connection Dial-Up Networking on a Satellite Pro L40 running Vista and can't get the modem to talk to the modem from the ISP. The connection appears OK and then you can hear the modem dial, but when the ISP picks up there is a bit of yelling and then my modem abandons the connection and I get the standard vista connection failed box.

  Things I've tried:
  -latest drivers for the 2.1.77.0 modem (and the rest of the system) downloaded from Toshiba and installed OK
  -all the updates of windows installed
  -removal of the modem in the Manager of peripherals and re - install
  -suppression of the agrsmdel.exe and then re-install
  -try different cables to plug into the phone jack
  -several different ISPS and phone numbers
  -reduce the maximum speed of the connection
  -connection to the same ISP with my Satellite L10; works very well never have time!
  -using the windows to diagnose and repair the tool (set last resort!); says that the modem works fine and can not find a problem with the connection

  Is it possible that the update of the BIOS on the laptop would make a difference (currently v 1.60)? I did some research on Google and found messages on various forums, which suggests that the connection between the motherboard and the modem chip is a little doubtful for all the Agere Soft Modem; If the case is it something I can fix myself or I should go for warranty repair?

  Midders

  Hello

  I'm sure that there is no problem with your modem, but with the configuration or even s ISP modem. I recommend you to speak with the support of the ISP.

• Problem with flash based Web pages and re - install windows

  Hello!
  I bought the Toshiba NB100 and use the netbook for a few weeks. At first, it worked all fine and exceeded my expectation.
  However, since one some time he experiences trouble with performance based on flash Web pages such as youtube and etc, which makes it not not possible to stream any video smoothly. Basically, it's a fast-paced photo slideshow :(
  The problem here is certainly not the performance mode, which is set at the maximum.
  I tried to get through this problem with re - install the operating system, which is windows XP, but after transfer of the content produced the DVD on a flash drive recovery, the system does not have a configuration menu. It gives me an error report instead.
  * I put the following qustions you: *.
  * 1. What can be the reason for slow running applications? *
  * 2. I'm doing something wrong when you reinstall windows? * Ts here a simple manual for the resettlement of the op?
  Comments, suggestions and advice will be much appreciated and I thank you in advance.

  So you have installed a generic version of Windows XP?

  You may have forgotten to install the drivers graphics and other critical drivers such as the Intel Chipset driver.

  You see problems in Device Manager?

• Satellite A300-1JJ, problems with Vista32

  Nice day
  I would apriciate if somebody help me.
  When I used Winxp32 had no problem, but when I installed Vista32 some problems appeared:

  (1) I can't use the multimedia buttons because I have an empty field in Toshiba assist-optimization-> Toshiba > buttons-> name of button. So, it shows me as there are no buttons at all. Version 1.1.14 VAP. I reinstalled 2 times. The second time I did it after installing the OS. But the name of the 'button' field is always empty.
  What should I do?

  (2) in Windows XP, I used Toshiba Power, utility so I could fix the multiplier of x6\x8\x10\x12 optimization perfomance\temperature\noise processor core. In this case the multiplier was constant and not changed (there is also possibility to use the multiplier changing, i.e. x 6 - x 8, x 10, x 12 6 - x 6 - x, but I used a fixed).
  Here in energy saving of Vista I have just minimum and maximum processing power in percentage. But really limit superior only set maximum State only, so I can't difficulty multiplier, but just so I get x 6 - x 8, x 6 - x 10 or x 6 - x 12, but x6\x8\x10\x12 not fixed. Should what program I use to fix it?
  The same problem with the fan controller. There are 3 fan-States in xp, but only 2 under Vista. Why?

  I don't understand why the laptop, which is designed for Vista has worst prospects for soft in the last in Winxp.

  Best regards

  Hello

  At first, I want to know how you installed Vista 32 bit.
  Have you installed with the Toshiba recovery image?

  The fact is that when you use recovery image all Toshiba tools and utilities will be installed properly and you will be able to use all the options including multimedia keys. Installation of VAP is the right solution, but I don't understand what the problem is here.

  On energy savings, I say follow: Toshiba Power Saver under Windows XP Home edition is not under Vista. Under WXP Toshiba has included more options for the power settings allow the best optimization. Vista is different and several power supply options are now controlled by Vista. Toshiba has included only several options to provide the best optimization.

  I use Vista und also power Toshiba, method of cooling in particular settings. I put it to the minimum and portable works really quiet.

  It has nothing to do with the possibilities for better or worse. Let's see how this will be done in Windows 7.

• Portege M700 - problem with Dynadock

  I can not change the resolution on a screen connected Dynadock and cannot save the display settings of all - how to fix this?

  I have a Portege M700 running Vista Professional SP1 - mainly the machine is used as a desktop replacement, connected to a screen Viewsonic 19 "wide through the Dynadock DVI - when it is connected so I have the laptop screen is off and use only the Viewsonic at a resolution of 1440 x 900. I had been bothered by the fact that whenever the resumption of the screensaver, the resolution would drop down to some lower State (I was not able to identify the dimensions he thought he was using but probably 1280 x 800, the default resolution of the internal display).

  I tried to solve this problem with the technical support level 3 without success. I thought I was smart and try to install the Intel Graphics Media Accelerator Driver update that is located on the Intel Web site (if you're just trying to install this software, Vista won't let you, but if you unzip it and manually update the drivers it works). This resulted in the connected screen Dynadock is off completely - no signal! So I uninstalled the drivers, reinstalled the drivers Intel original, but now, I have no the ability to adjust the resolution on the Dynadock login screen - and it is defaulting to something that's not going to (too broad and not high enough)!

  I lived several cycles to uninstall and reinstall the drivers for the graphics card (Mobile Intel 965 chipset) and the Dynadock; I updated the drivers Dynadock with the latest download from the website of DisplayLink, tried all sorts of drivers for the monitors associated with DisplayLink, tried several restorations system (which have all failed, which was also quite disturbing but less than an immediate concern), etc. Through all this, there is absolutely no way to choose the correct resolution of the screen through the display properties (my choices are 800 x 600, 1024 x 768 and 1280 x 800), and even simply activate an additional screen translates to nothing happens - the new settings do not stay after hitting "Accept" or "OK". I thought that I had licked when I realized that I had to uncheck "Extend to this monitor box office" to screen internal laptop - indeed I was then able to choose 1440 x 900 for the Viewsonic and everything was good, but everything came back after reboot. Of course, now when I try to repeat, I am unable to uncheck this box not more for the internal screen (well, actually, I can uncheck, but when I hit "apply" or "OK" it simply gets selected again).

  All this comes after I spent weeks trying to get this machine to work with the port replicator, which also did not work - a problem that appears to be from an incompatibility with Vista display card drivers and the port replicator (would have been nice if it sales had told me that when I bought the thing, but I digress...)

  In any case, it seems, as it is a Vista problem, I've seen this question asked of other portable devices vista and displaylink other advice, but I know it's possible to have a working reasonably OK solution since I've had one before I went and it messed up trying to work perfectly. Serves me right for spend 3 k $ on a machine and expected that it works as described, I guess. If anyone has any ideas... my next step is probably a downgrade to XP Pro, and then if that does not work, I'm tempted to break into pieces. Or, if someone's figured out how to get the port replicator to work with a M700 Vista, which is actually a better option for me...

  -Tony

  Hello Tony

  It's a very long story, but I use Portege M700 with Dynadock DVI (PA3542Y1PRP) and have no problem at all. After reading your ad I tried changing all the display options and I didn t notice something strange. It works well.

  Read your ad I see you tried to install different things and I wonder not to have so many problems. The best solution for you is to install the new OS using recovery image. Do the clean install of OS and install later Dynadock Utility 2.3 c. be careful while installation is running and do not interrupt the procedure of facilities. Make sure that all software components are installed correctly.

  When you start installation Dynadock Utility Dynacock can not be connected. When you see the window where you will be asked to connect Audio device USB connect the Dynadock to the USB port of your favorite. I use the USB port on the back.

  I use the external display to monitor LCD 22 with a resolution of 1680 x 1050. In the settings screen is display number three and when I click on it I can set the resolution to the maximum level (native resolution). The image is perfect.

  I tried the same as you:
  -Set the external display as primary monitor (for computer laptop LCD was OFF)
  -J' have enabled screen saver and tested several times, but the resolution is always the same no changes at all the
  -With these settings, I rebooted the phone several times as well as the resolution was still the same no problem at all

  After reboot, I can see the image on the notebook LCD only, to the point where I have to write the password that I can see the same image on laptop LCD and external monitor. A few seconds later, the image is switched on external monitor only and it is the same thing you want to have. The resolution is the same again (native resolution). No change at all and all seems OK.

  At the end I've switched back to the LCD display only. It is also interesting to procedure. As a first step, you click on display number one and activate extended desktop. After that, you will be able to use the option to change the primary monitor. A little strange to me, but OK.

  So everything works well for me and for you I only see an option. Reinstall Vista, install new utility Dynadock (new installations) and test again.
  One last thing: do not connect Dynadock on different USB ports. Use always the same.

  Bye and good luck!

• Problem with satellite L40 12 X graphic card

  Hello, I have a problem with my graphics card. I have not now how to enlarge the memory video it s.

  Physical memory: 1015 MB
  Minimum graphics memory: 8 MB
  Maximum graphics memory: 224 MB
  Used graphics memory: 9 MB
  Processor: x 86 family 6 model 14 Stepping 12

  I tried to look in the bios but I have not found anything to expand my graphics memory.
  Please help me

  AFAIK, you can't increase the manually shared memory.
  The graphics driver controls this value automatically and depends on the RAM.
  If you want to use more shared memory, then the RAM needs to be increased