Problems with my application running Cap

Similar Questions

• I have problems with JavaFX applications run on raspberry pi!

  I have problems with JavaFX applications run on raspberry pi. I did all the steps of the course videos: overclocking, without comment that I had to uncomment on the framebuffer, but Exceptions are always produce. Demonstration of fireworks as an example does not work. Someone went through this problem? Java applications are ok. Like the versions of java in netbeans project and also on 'Properties' and they are all JDK 8. So if anyone can give a clue, I am very grateful!

  Can you provide the exceptions that you got so I can help you better?

  You want to make a coaching for this session?

  Vinicius-

• Problem with an application running Adobe Flex. Tech say that they cannot monitor, track or detect the problem.

  Problem with an application running Adobe Flex. Tech say that they cannot monitor, track or detect the problem. Application will stop and give wanders it depending on:

  Failure of server APACHE Bridge:

  ---

  Not available for a connection of back-end server: expired after 10 seconds or idempotent OFF or not idempotent method.
  

  Download, installation, implementation of Flex>

• Problem with an application of text analysis

  Hello

  I am a beginner in labview and I have some problems with my application.

  I have the front of my VI, an area of input text and two arrays of strings: one that contains a few words I have to say if they can be found in the text.

  And the other table contains the results of research: found or not found

  I did my version of the block diagram (I have attached to it), but I noticed that it only works only the first time I run the VI, subsequently, it displays the same results despite the entry of text or words. I find the my table has continued to add new entries every time that my for loop runs so I try to reset the table with constant strings at the beginning, but I guess that I did not it properly because I have the same problem.

  And I also have another problem: my array of words has its size = 7 and if I fill it with fewer words it's size, empty boxes in the results table appear as noted.

  Can anyone gve me a suggestion?

  The first attached VI is my original request where I found the problems described and the second contains what I have tried to correct

  Autoindexing if your friend here (and MUCH simpler because of things).

  Also know that "offset after match" will be-1 if the word was not found.  So you can just do a simple check for the number being greater than or equal to 0 see if it has been found.

  

• Since the recent upgrade, I don't see any of my projects in Shutterfly. Their customer support says that it may be the problem with the application Java and Adobe Flash Player

  See above - there known problems with these applications?

  Your player (if any) Java is not indicated clearly in your list of plugins, and your FlashDrive is several versions behind. If Apple has a site update, you can check that first. Mozilla site is here: http://www.mozilla.org/plugincheck/

• 7 error "Paris 7.2.241.1enRegInstaller.exe of work and has been closed." A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  Original title - 7.2.241.1enRegInstaller.exe

  Hello.

  Today, JUST after I "Set Windows to update," twice, I got the disconcerting message:

  "Paris 7.2.241.1enRegInstaller.exe of working and was closed".

  A problem with the application to stop functioning properly.  Windows will notify you if a solution is available. »

  Any wisdom or experience with this?  I'm on a 64-bit HP Pavilion older (dv7-1245dx) with this OS JUST-update Windows (Vista Home Premium).

  Thank you.

  GIES W

  The solution has been found just uninstall bing bar, restart the computer, and if you want just bing toolbar to reinstall. This easy solution my system fixed.  Bing has again reminded all my points that I have amassed

• Dialog box: problem with an application mstoolbar wlextension.dll

  Original title: dialog box:

  I am told that there is a problem with an application mstoolbar wlextension.dll

  Hello

  ·          What exactly is the problem that you are facing?

  ·          When you get this dialog box?

  wlextension.dll is a MSNExtension.DLL belonging to Windows Live Toolbar.

  I suggest you to uninstall the toolbar and install it again.

  Refer to: http://help.live.com/help.aspx?project=toolbarv3&market=en-nz&querytype=topic&query=toolbarv3_proc_uninstalltoolbar.htm

  You can post your queries to the Windows Live Forums to learn more: http://windowslivehelp.com/

  Diana

  Microsoft Answers Support Engineer

• I have problems with my application of the java language.

  I have problems with my application of the java language. It will be open only for about one second, and it won't let me write all programs, it looks like the command prompt when opening. what the * is underway and what can I do to solve this problem.

  Hey Kevin,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it.

  I would really appreciate if you could answer the following questions:

  1. is the specific question of the application of the Java language?

  2. did you of recent changes made to your computer before the show?

  3. you receive an error code or message?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  If the problem is specific to the Java application, then I suggest you to contact Java support from the links below:

  http://www.Java.com/en/download/support.jsp

  Java Help Center:

  http://www.Java.com/en/download/help/

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• I had problems with the application Manager Update, then I was instructed to re - install the product now I can not install I get the error

  Cs6 bought for more than a year, and recently had problems with the application manager, then I was instructed to re - install the product now I get errors after downloading to install it, so now I don't have cs6 on my computer, I can't go to adobe as I keep getting palmed to do that and the next thing , why can't I talk to someone why my program is not installed.

  It's ok now, I used the creative cloud cleanser and then tried to install again and bingo! everything fine now, thanks anyway

• Problems with windows update, run sfc/scannow and boot into safe mode. (Vista Home Premium)

  Hi all

  Please bear with me here that I try to explain all the questions I have with my computer right now. I'll try to explain everything that self-organization as possible, but if you need more information or file papers to provide a solution more precise, do it me know.

  To start, I use a HP Pavilion dv6000 series (dv6748us to be exact) with Windows Vista Home Premium (32 bit) installed. (Service pack 2). About 6 months ago I got this laptop from what I believe was the conflicker virus (kept forwarding pages, arrested updates and antivirus programs, etc.) and I managed to get Windows Update works again. My help and Support did not work well, it only worked in Mode without failure, so I did some research and tried a bunch of suggested corrections (update the registry, etc.) and got it work yet once again. I don't know if one of the tools that I used all by setting the Help & Support could have caused problems that I now (as I literally tried everything under the Sun until I got to work), but my Windows Update does not work properly again.

  A few weeks ago, I installed some updates and restarted the computer, but updates did not finish install on reboot. He said the usual "Configuring Updates, do not turn off your computer", but never showed percentage complete or whatever it is. It restarted, and when I open Windows Update, he said the last time I checked the updates has never been (obviously not true), and when I tried to check the updates, it jumped right to the message telling me I have to restart my computer to complete the installation of updates. She continues to do everytime I open Windows Update. From time to time, I try to restart it, just to see if it will work, and he never does.

  I spent hours trying all the solutions I could find in Google. I tried to run system update readiness tool, which seemed to run correctly (but does not solve the problem). I then tried the difficulty it for Windows Update, and it does not solve the problem. (It might be important for me to mention that I also have problems with the difficulty It Center itself, too. Individual tools like that for Windows Update is running, but the difficulty It Center program keeps giving me the error message that "a problem is preventing the troubleshooting tool to start.") I also tried to rename the pending.xml file, and then later I deleted it, after reading in another forum that you rename the file could cause system instabillity or something like that.

  Unfortunately, I can't use system restore to solve all my problems, because all my previous restore points have disappeared (I don't know if the virus wiped out them, or if the computer removed on its own) but restore points only I checked are those that have been created recently, during the time I had these problems.

  I tried running sfc/scannow nothing helped, as he continues to tell me that there is a pending repair, but repair pending never ends. I tried to use the command of /revertpendingactions of dism.exe/image:C\/cleanup-image in the command prompt of recovery center to stop it pending repairs, and that has not worked because it claims that dism.exe that does not exist / is not a valid command. No matter what I try, I can't have this pending repair or my updates to complete pending.

  I tried to boot mode safe several times as well and he hung up on crcdisk.sys when starting every time.

  Being that I can't use sfc/scannow, System Restore, or get into Safe Mode, I'm really lost as to what I should do next. I'm honestly not sure if the problems are related, but I just thought it would make sense to list them all in one place.

  Please note that I don't want to re - install Windows Vista, or don't I think I need, because the computer works very well for most. (I use it for typing this right now). I had much rather bring all the features on mine, which I believe can be achieved with the help of the right person.

  If someone could provide me with suggestions/solutions, it would be greatly appreciated! Certainly, it would relieve a lot of stress for me!

  DISM is a thing of Windows 7. First test the hardware.

  Standard hardware troubleshooting
   
   
  First to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...

   

  Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.

   
  Diagnosis of memory

  If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

   

  S.M.A.R.T
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)
   
  WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List

   

  If it is on will be true, otherwise on enable in the BIOS of the computer.

   

  Predict the failure must be False if everything is ok.

   

  In Vista and later if SMART failure predicted Windows prompts the user to run the backup.
   
  Run chkdsk

  In computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.

   

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  sfc/scannow

   

  Heat

  Heat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.

   

  For memory diagnostic results

  Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.

   

  Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

   

  Double-click the entry for more details on this entry.

  For results of Chkdsk

  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 7 and Source disk
  Look for EventID is 11 and the Source disk
  Look for EventID is 50 , and the Source is disk
  Look for EventID is 51 and Source disk
  
  Look for EventID is 52 and Source disk
  Look for EventID 55 and Source is NTFS
  Look for EventID is 130 and Source is NTFS
  Look for EventID is 134 and Source is NTFS
  Look for EventID is 137 and Source is NTFS
  Look for EventID 1001 and Source is Autochk
  Look for EventID 1001 and Source is Winlogon
  Look for EventID 1001 and Source is WinInit
  Look for EventID 1001 and Source is Chkdsk
  Look for EventID is 26212 and Source is Chkdsk
  Look for EventID 26213 and Source is Chkdsk
  Look for EventID 26214 and Source is Chkdsk
  Double-click the entry for more details on this entry.
   
  PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.
   
  For the results of the SFC
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted.

   

  To see if there

   

  findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

   

  There are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.

• Problems with the application mail in Windows 8

  Original title * app email windows problem 8

  my windows mail 8 app suddenly stopped receiving and sending e-mail, but they are received in the mail from bt

  Hi Neil,

  Thanks for posting your query on the Microsoft Community.

  As described in the question, I understand that you are unable to send and receive emails.

  This issue would have occurred due to corruption Mail app.

  I need some information to move forward.

  1 did you changes to the computer before the show?

  2. which email account you set up with Windows mail app?

  I suggest you follow the methods to check if it solves the problem:

  Method 1: Run the Windows 8 App troubleshooting tool.

  This utility automatically solves some issues that may prevent your running applications, including the suboptimal screen resolution and security or incorrect account settings:

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 2: Follow the instructions in the link below:

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app

  I hope this helps. Please let us know the results. We will be happy to help you further.

• Unusual problem with creative application Cloud

  On one of my computers, which is a machine of Windows 8, I have problems with the creative cloud application.

  A few weeks ago, I opened the creative application of Cloud, and the window open with the top bar that has the title 'Creative cloud', the three icons on the right side shows correctly, then the black bar underneath with cloud icon, the words 'Creative cloud' and the gear showing correctly icon. However, the entire body of the page is completely empty.

  I contacted Janine Smith at the NAPP help desk and suggested that to delete the Adobe\OOBE folder. I did, and then the creative application Cloud worked as it should. I point out that I also downloaded and reinstalled the creative cloud application.

  Unfortunately, when I turned on my computer the next day I had the same problem. If someone has had this problem and has been able to get it fixed?

  I also have another problem that whenever I turn on my computer, the creative application cloud broken runs and open this application white background on my screen.

  I have a second computer running the creative cloud and have had no problems with it.

  I can't wait to hear any other comments on this issue.

  Laurent

  Yes, I'm sorry I missed OOBE in the opm.db of instructions file is located under the OOBE folder.

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• After the upgrade to El Capitan having problems with the application Mail

  Hello:

  Recently upgraded my Mac mini to El Capitan. Before the upgrade (from Mountain Lion), I got Thunderbird mail application works perfectly access my GMail account and my Hotmail account. Now, I have no problem with Hotmail and Gmail keeps asking for the password to connect to the gmail imap server. I have TBird in my laptop Ubuntu Linux and Windows too and that you have not had any problems like that. Any help to solve this problem is appreciated. Thank you.

  Try this: https://support.google.com/accounts/troubleshooter/3178296?hl=en

• problems with my application Simulator in Builder 4.6

  Hello

  I just all of a sudden on a problem that I can't seem to understand.  I can build a Release version of my application without problem, but try to do some tests on the Simulator annoys me instant app closes with 8 error on the Simulator and this message in flash builder:

  Failure of deployment: Info: request shipment: launch
  Info: Action: launch
  Info: Launch of com.babware.CribbageCompanion.debug.testDev_anion_debugcffb4b91...
  result::failed
  Info: done

  In most of my research, it has had problems with Debug chips, but I have regenerated and made sure they are all valid on my device and in Flash Builder.  Any other ideas?

  problem was the Simulator. Tried to hang my PB appear as a target and everything works fine. * shrug *.