Manager file recovery HP stopped working

Similar Questions

• manages scheduled tasks has stopped working and was closed

  Lately I get this error message often when I start using my Vista PC (Vista Business SP2) in the morning: "manages scheduled tasks has stopped working and was closed".

  And this morning the automatic update of Windows Defender definitions also could not install (so I would be dnld and installed).  Set to automatic update referred to 'unknown error' (8 and 57, I think).

  FYI, sfc/scannow reported no integrity violoations with system files.  I also reconfigured my PC there is to make sure that it is clean, fresh and perfectly up-to-date before reinstalling all my apps, and it's been updated for about 2 months then.

  How this application problem "manages scheduled tasks" can be fixed?  If you don't know, where can I get an answer?  Neither Google nor Bing seem to show any reference to the exact phrase "" manages scheduled tasks has stopped working stopped working '. "

  Craig in New Jersey

  Update 7/22: I'm starting to suspect a problem of interactions between turn off Vista and [printer] HP Digital Imaging Monitor.  I tried to disable it via msconfig, a couple of days and have not seen the mistakes regularly ever since, but the jury is still pending for another week or two.   I'll report after awhile.

  It is too early to point a finger because we know that all of them have well worked normally in the past and they seem equally at risk of corruption.  For example, I have no these errors when you use the same software HP on my Win7 PC and I don't have these errors for a few months after that the reconstruction of my Vista laptop, so I'm suspecting some piece of software has become corrupted (something in Vista), or something the tracking software program, some windows or component or registry setting software execution to one who relies on the HP printer.

  Craig in New Jersey

  Update 7/27 edit: Since disabling component HP Digital Imaging Monitor (hpqtra08.exe) drivers HP printer/scanner more than a week ago, I have not seen error messages 'has stopped working and was closed"breed, and Windows Update seems to operate normally.

• Vista do not you answer ping - file sharing also stopped working

  Greetings!
  I have problems with my windows vista computer. It can access the internet, load the pages and other servers, ping, but he stopped answering the ping requests and file sharing has stopped working (other computers cannot access its actions).
  -J' have already disabled the two firewalls (both windows and f-secure).
  -If I run wireshark, I can see the Ping ICMP requests (as they arrive at the machine), but ignores them (no ICMP response).
  -When I try to browse the computer from another windows (windows 7), he sees the computer (they are on the same workgroup), but it is impossible to browse. Try to access it from a mac also fails.
  -J' tried to use direct ip address instead of the netbios name, with no luck (access to \\192.168.1.101, for example).
  -Of course, I tried already reboot my router, computers, etc.
  -sfc/scannow detected a few corrupted files (but says he fixed them). But it did not help.
  -J' thought that it might be a problem with windows system files, so I uninstalled SP2 and then reinstalled with no luck at all.
  -J' already tried to reset the tcp ip (netsh int ip reset) stack but also had no success.
  -I'm clean of viruses; already run 3 different AVs (including boot from rescue CD to detect rootkits) and nothing came.
  I'm almost reinstall my whole windows, but I'm afraid even if it cannot solve the problem and having to install from scratch and reinstall * all * my new aplications will be a last operation of the station. Clues as to what I could do? Is there a way manually reset/reinstall only the sectors/services windows network?
  Thank you for your time,
  Gustavo

  Greetings!

  Just the answer I finally had myself on this issue.
  The problem was a malware removal tool called Combofix. I had an infection and several tools to clean, one of which was this tool. I ignored the warning to leave unattended a guru of malware removal, and I just let it do its job (I know, I was wrong... but desperate times require desperate measures). Apparently, he finished and my system was working fine... but not the file share and ping responses.
  Finally, there is a way to reverse the changes made by the latter:
  • Go to C:\WINDOWS\ERDNT\subs\erdnt.exe, double-click erdnt.exe , and then restart the machine.
  • If this does not work, then navigate to C:\WINDOWS\ERDNT\Hiv-backup\erdnt.exe, double-click erdnt.exe and restart the machine.
  By doing this, the reverse tool changes to the system registry and these two services that weren't previously returned to work normally.
  The Trojan horse itself not worried anymore, because I ran Combofix all as precautionary measure, since I had already deleted the Trojan horse itself (ZeroAccess, by the way).
  That being said, I would think twice before getting a Dell computer next time... The version of Vista that comes with it only allows a 'Clean Install' and not 'upgrade install', which seriously complicates to reinstall the system failure (since I have to reinstall * everything *). I wonder if other versions of windows to PC manufacturers have the same limitations...
  Gustavo

• File Explorer has stopped working properly from the taskbar

  File Explorer has stopped working properly from the taskbar. Currently, I get only 3 windows on taskbar & opening No. 1 opens no.2 & vice versa, but no. 3 opens on its own. Can someone explain this & find a cure?

  I would like to highlight the file Explorer icon and pin it again.  To do this.

  (1) close all running programs, including records from the file Explorer

  (2) right click on the icon on the task bar Explorer and "Unpin from Taskbar" to remove

  3) press Windows + R to display the race. Type C: and press OK. This will open your C: drive.

  (4) make a right click on the taskbar that appears, the file Explorer icon, and then click "Code Pin to Taskbar" to pin it.

• Satellite Pro U400 - TrueSuite Manager setup.exe has stopped working

  I have a Satellite Pro U400 running Vista Business (OEM) and at the start of a desktop computer TrueSuite Manager pop-up message appears telling me there is an update to install.

  When I try to install the update, I get a window that says Setup.exe does not work.

  Signature of the problem of the relationship an APPCRASH-is30C0.exe with the exception C0000005 code.

  I tried to uninstall the TrueSuite Manager through Windows uninstaller programs, but get the same message - setup.exe has stopped working.

  Appreciate advice on how to solve this problem.

  Hello

  I think that it is a simple case of corrupted registry entries and files that could belong to the TrueSuite Manager software.

  I agree with the previous user, and I recommend to reinstall this software again.
  You may need to clean the OS before installing the Truesuite again.
  In this case, I recommend the CCLenaer. It s a simple and free tool and can be downloaded on most Web sites.

  Google and you should find more information.

  See you soon
  Jayjay

• BLACKBERRY DESKTOP MANAGER blackBerry Smartphones has STOPPED WORKING

  Am having a problem with my Blackberry Curve to my office data synchronization.

  Had two crashes of disk in two weeks. Later included the replacement of the two drives configured in RAID 0. Am running Vista Ultimate with MS Office 2007 SP2. I've restored the system using the full restore of backup restore & Microsoft and got everything works well again. Since the last crash, whenever I have sync Blackberry Desktop, I get the error: CALENDAR TREATMENT DEVICE - BLACKBERRY DESKTOP MANAGER has STOPPED WORKING.

  I was at the forums online and support including Blackberry sites and took the following measures, which neither solves the problem.

  ·         Uninstalled DM 4.7 and installed 4.6 DM (one of the forums suggested this - I was running 4.6 before the last crash when the error started when I upgraded to 4.7.)

  ·         Repaired the outlook.pst file by using the windows onboard utility (he finds errors and repair the)

  ·         Delete the synchronization of the DM section and re-configured

  ·         Restarted the computer Pocket

  Does anyone have any suggestions?

  The problem is resolved. I talked to the Tech Center RIM and the calendar on my camera had been damaged. The solution was to remove the calendar on my device and then re sync.

• Utility power management Portege A100 has stopped working

  The power management utility has stopped working and when I try to save the profile of Laptop/portable power management screen control panel I get a message saying that the power cannot be defined as two revision levels are incompatible.

  I tried to remove and reinstall the Power Management Utility and utility Toshiba but when reinstall I get a fatal error notice and the 0x51A error code. Can anyone help please?

  I suspect that this problem could have been triggered by an update XP or Norton Internet Security.

  Hello

  Maybe the registry is confused upward
  Try to clean and repair the registry using CCleaner. It the free tool.

  Firstly uninstall the energy saver, then clean the registry.
  Download page of the European driver Toshiba Portege A100 Win XP tools and drivers.
  You will need:

  Common module-> must be installed first!
  Energy-saving

  Good luck

• Error message: Microsoft resource in the conversion object utility file coff has stopped working.

  I get a Windows error message:

  Coff file of Microsoft resources to object conversion utility has stopped working.

  Hello Pro V1,

  To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis may take some time to complete.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Manager application Adobe has stopped working

  A few days ago, Acrobat Professional XI decided it would not start.  I have uninstalled, reinstalled, but I get the same behavior.  Specifically, "Adobe Application Manager has stopped working - windows can check online...» "Details of the problem are

  How can I solve this?

  Although Adobe proclaims their commitment to customer support, there don't seem to be a way to communicate with them to try to work through this, other than this forum.  No phones.  no emails.   No cat.

  Hey stephenp36835709,

  We're really sorry for the inconvenience posed for you.

  You can access the below mentioned link to download the latest version of Adobe Application Manager and install:

  Adobe - Adobe Application Manager: for Windows: Adobe Application Manager

  Let me know if it helps.

  Kind regards

  Ana Maria

• All files .exe has stopped working

  Whenever I try to open a program I get the * *.exe has stopped working. This is on firefox, windows media, nero, games player, etc.. The only way for me to open anything it must be run as an administrator will search for virus with spyware doctor™, malicious software with malwarebytes' Anti-malware and registry with Regcure errors. but nothing works any help.

  Here's what werFault.exe said on some programs.

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: Hoyle Puzzle Games.exe
  Application version: 0.0.0.0
  Application timestamp: 562b029a
  Fault Module name: StackHash_6bc7
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception code: c0000005
  Exception offset: 04554e40
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033
  Additional information 1: 6bc7
  More information 2: f3f6a1403802118ada460cd45530935b
  Information additional 3:6477
  Additional information 4: d34edb9b57aa7d1aac3252e1a9591198

  Signature of the problem:
  Problem event name: BEX
  Application name: FreeCell.exe
  Application version: 6.0.6001.18000
  Application timestamp: 47919e59
  Fault Module name: StackHash_6bc7
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 04554e40
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033
  Additional information 1: 6bc7
  More information 2: f3f6a1403802118ada460cd45530935b
  Information additional 3:6477
  Additional information 4: d34edb9b57aa7d1aac3252e1a9591198Problem signature:

  Signature of the problem

  Problem event name: APPCRASH
  Application name: NeroExpress.exe
  Application version: 9.0.9.100
  Application timestamp: 48d36d6b
  Fault Module name: StackHash_6bc7
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception code: c0000005
  Exception offset: 04554e40
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033
  Additional information 1: 6bc7
  More information 2: f3f6a1403802118ada460cd45530935b
  Information additional 3:6477
  Additional information 4: d34edb9b57aa7d1aac3252e1a9591198

  Exception code: c0000005

  Check please the RAM to find errors. Please download memtest86 + [1] write a new bootable CD (use a CD - RW if possible) of ISO (download and use ImgBurn [2] for this), restart your PC and scan your RAM 4-5 h to find errors.

  André

  [1] http://www.memtest.org/download/4.10/memtest86+-4.10.iso.zip
  [2] http://www.imgburn.com/index.php?act=download
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Vista 'Open file location' has stop working after installing IE9 Beta

  My context option 'Open file location' has quit working on all the shortcut files (.lnk).  Choosing 'open file location' triggers WITHOUT ERRORS and seems to not trigger any increase in CPU activity, or I can't detect any change in process explorer, it's just nothing at all.  BUT it doesn't seem to work because he used for the FIRST time (and only the first time) I have choose it from a shortcut on the desktop after a reboot... as long as I do not first open all records.  PLEASE NOTE that this behavior only started in the morning, after I installed IE9 Beta on my computer.

  I use Vista Ultimate SP2 on a box of Dell, Intel Pentium D 3.00 Ghz with 3.5 GB of Ram.

  I rely heavily on "Open file location" to navigate through my system so that your help will be greatly appreciated.

  Here's the sumery of FileExtInfo.exe of my .lnk file associations:

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Information of the file association [.] LNK file type]
  Page generated by FileExtInfo v2.0 on 20/09/2010 10:13:13

  FileExtInfo © 2005-2007 Ramesh Srinivasan.
  Homepage: http://www.winhelponline.com
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  [HKEY_CLASSES_ROOT\. LNK]
  @= "lnkfile".

  [HKEY_CLASSES_ROOT\. LNK\ShellEx]

  [HKEY_CLASSES_ROOT\. LNK\ShellEx\ {000214EE-0000-0000-C000-000000000046}]
  @= "{00021401-0000-0000-C000-000000000046}.

  [HKEY_CLASSES_ROOT\. LNK\ShellEx\ {000214F9-0000-0000-C000-000000000046}]
  @= "{00021401-0000-0000-C000-000000000046}.

  [HKEY_CLASSES_ROOT\. LNK\ShellEx\ {00021500-0000-0000-C000-000000000046}]
  @= "{00021401-0000-0000-C000-000000000046}.

  [HKEY_CLASSES_ROOT\. LNK\ShellEx\ {BB2E617C-0920-11d1-9A0B-00C04FC2D6C1}]
  @= "{00021401-0000-0000-C000-000000000046}.

  [HKEY_CLASSES_ROOT\. LNK\ShellNew]
  "Handler" = "{ceefea1b-3e29-4ef1-b34c-fec79c4f70af}".
  "IconPath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
  74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.
  00,68,00,65,00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 2 c, 00, 2d, 00,------.
  31,00,36,00,37,00,36,00,39,00,00,00
  'ItemName"="@shell32.dll,-30397 '.
  'MenuText"="@shell32.dll,-30318 '.
  "NullFile"=""

  [HKEY_CLASSES_ROOT\. LNK\ShellNew\Config]
  "DontRename"=""

  [HKEY_CLASSES_ROOT\lnkfile]
  @= "Shortcut".
  "EditFlags" = DWORD: 00000001
  'FriendlyTypeName"="@shell32.dll,-4153 '.
  'IsShortcut '=' '
  "NeverShowExt"=""

  [HKEY_CLASSES_ROOT\lnkfile\CLSID]
  @= "{00021401-0000-0000-C000-000000000046}.

  [HKEY_CLASSES_ROOT\lnkfile\shellex]

  [HKEY_CLASSES_ROOT\lnkfile\shellex\ContextMenuHandlers]

  [HKEY_CLASSES_ROOT\lnkfile\shellex\ContextMenuHandlers\OpenContainingFolderMenu]
  @= "{37ea3a21-7493-4208-a011-7f9ea79ce9f5}".

  [HKEY_CLASSES_ROOT\lnkfile\shellex\ContextMenuHandlers\UltraSentry]
  @= "{8EBAD5CA-D4BF-44CF-84D8-C38B1464303D}".

  [HKEY_CLASSES_ROOT\lnkfile\shellex\ContextMenuHandlers\ {00021401-0000-0000-C000-000000000046}]
  @=""

  [HKEY_CLASSES_ROOT\lnkfile\shellex\DropHandler]
  @= "{00021401-0000-0000-C000-000000000046}.

  [HKEY_CLASSES_ROOT\lnkfile\shellex\IconHandler]
  @= "{00021401-0000-0000-C000-000000000046}.

  [HKEY_CLASSES_ROOT\lnkfile\shellex\PropertySheetHandlers]

  [HKEY_CLASSES_ROOT\lnkfile\shellex\PropertySheetHandlers\ShimLayer property page]
  @= "{513D916F-2A8E-4F51-AEAB-0CBC76FB1AF8}".

  [HKEY_CLASSES_ROOT\SystemFileAssociations\. LNK]
  "FileOperationPrompt"="prop:System.ItemType; System.FileOwner; System.Author; System.Title; System.Subject; System.Comment; System.DateModified; System.Link.TargetParsingPath ".
  "FullDetails"="prop:System.PropGroup.Description; System.ItemType ".

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\. LNK]

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\. LNK\OpenWithList]

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\. LNK\OpenWithProgids]
  "lnkfile" = hex (0): "."

  Thanks for the reply Martinez!

  1. sometimes for all the shortcuts in all folders, including the office.

  2. sometimes for shortcuts related to music files, JPGs, microsoft word files, exe files, and others.  The shortcuts are in several different directories.  It is worth noting that the target location listed in the properties files is correct exe programs will be running, and music or photo files will play/display double clicked.  Only problem is NO way to open the folder of file location of the shortcut target.

  Step 1: Permissions for all folders that I normally use are the same they have been for years, which includes the folders that contain the shortcuts and those containing targets.  They are: 1) the permissions of system-all verified.  (2) MyName (HOMEPC\MyName) - all verified permissions. (3) Directors (HOMEPC\Administrator) - checked everything except special permissions.  The exception being the 'Programmes' to root folder that has no permissions other than read, execute, and list.  Subfolders for individual programs have the same permissions as mentioned above for my usual records.

  Step 2: I uninstalled IE9 Beta and the location of the file open function has been restored as if by magic!  .Lnk file associations appear to be identical to what they were when that was the problem.  IE9 has maybe a bug or an incompatibility in this somewhere1?

  Thanks for your help... I'll check to see if it is what I do for IE9, like the speed increase!

• Professional Flash CS6 - menu "File-new" has stopped working.

  He used to work; now, nothing happens.  'File Open' works well. Using Windows 7.   Restarted Windows, but no help. I had recently changed JVM.ini from 128 to 512, but I tried to change this back, and the new file still does not work. I reinstalled Flash Pro CS6 and it still does not work. Any ideas?

  Thank you!

  Solved - sort of.  I opened a FLA file and registered as a model, with my own categrory.  (Apparently wiped out Flash models custom, I had recorded previously.)  The new file is working now, showing not only my template saved, but all the standard models too. Probably a bug in CS6 and/or a kind of conflict with Windows 7.

• My recovery disk stopped working and I need to recover my pc, what do I do?

  My recovery (F11) on my HP Compaq sr5002hm button does not work and when I try to start the Recovery Manager it says that there is no recovery partition. I can see the recovery in my computer drive, but I don't know what to do at this point. I'm normally computer savvy, but I don't have another way to re - install windows vista. What should I do?

  Hello

  Contact HP about the problems with their recovery process

  It's their recovery process, not Microsoft

  _____________________________________________________

  also ask them, if necessary, to send you a set of vista recovery discs to back to factory settings

  they do it for a nominal cost of $

  ______________________________________________________

  Contact HP

  http://welcome.HP.com/country/us/en/contact_us.html

  HP Support Forums

  http://h30434.www3.HP.com/

• Share printer and file sharing has stopped working. -Between a Windows Vista-based computer, a Windows 7 PC and an Xbox 360

  A computer running windows vista and is connected

  Computer B is running windows 7 and it is wireless

  Is the Xbox 360 Wireless

  a couple of weeks computer disappeared from computer B and my xbox network adapter. computer a can still pull files from computer B, but it does not work the other way around. Computer B can share files with my xbox, but computer cannot.

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Networking of computers running different versions of Windows

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Have a read of the link above re Vista file and printer sharing.

  Permissions/Share info is there as well.

  If you use Norton, McAfee, Trend Micro or Kaspersky I.S., make that file and printer sharing is enabled in THE Firewall (or LAN enabled, depending on how their Exceptions are formulated in their firewall)

  Read the information above.

  See you soon.

  Mick Murphy - Microsoft partner

• Manager proxy ADB BlackBerry stopped working

  Hello

  I worked on an Android app for the months that I was developing on my classic BlackBerry. It was working fine. I could even debug via WiFi through the Proxy of BlackBerry ADB Manager. However, after the update my Android SDK Manager and a bunch of Android stuff here today, my device will not be displayed in the adb devices list more (not in IntelliJ and not on the command line). My camera is in development mode and has a debugging deployed token.

  The tool always seems to run IntelliJ, and it connects properly as it did before. Is there a specific version of Android SDK Build-tools I should use? I guess I'll try and remove the new packages until I'm back to the old, but I do not know if this is the problem.

  This is what my coach of Android SDK looks like:

  

  Perhaps any other developer can help me by downloading the latest version of the Android SDK and see if it works (to check that it is not my machine being weird).

  Well, I fixed by uninstalling my Android SDK and by installing a former of this site:

  http://www.Appcelerator.com/blog/2014/10/updating-to-Android-platform-tools-version-21/

  

  I will continue to use it until the BlackBerry Update Proxy ADB Manager works with the version of the Android SDK Platform-tools v23.1