Problems with soap Interface

Similar Questions

• Satellite L670-1HD - problem with audio interfaces USB 1.1

  Hello

  I have a Toshiba L670-1HD with an Intel HM55 chipset, and an Intel Core i5 460M processor. I use this machine for my music software and that's why I use different audio interfaces external and USB-MIDI-Controller with build in audio interface like Mixvibes U - Mix Control Pro (http://www.mixvibes.com/content/u-mix-control-pro). These built-in audio interface are connected via USB 1.1. Always when I use this audio interfaces interfaces crash audio internalt - the sound is cracked very hard and there are noises in. The controller of all crashes sometimes too.
  When I use another interface audio as an audio interface Hercules DJ Trim 4 & 6 (http://www.hercules.com/uk/DJ-Music/bdd/p/102/deejay-trim-4-6/), which is a USB 2.0, everything works fine. No crashes, no cracks and no noise.
  You could say now that there is no problem and I should stick to the Hercules interface if it does no problem. The problem is that the Hercules is an audio interface only, there is no controller in it with which I can control my music software.

  I've updated all the drivers from the support page of this site without success. Is there a solution available or the Toshiba knows this subject? Am I the only one having this problem?

  Would be nice if a Toshiba official support employer could respond to this message. But this does not mean that I don't want to read somethng submitted by the user for which an index - all Board/Council/recommendation is welcome.

  Thanks in advance for the help!

  See you soon,.

  Stefan

  Hello Stefan

  In my view, you see the problem from the wrong point of view.
  Toshiba and each laptop manufacturer offer product and hardware and software support. So if there is a general problem with the functionality of the material you are by Toshiba on the right address.

  You use a third party and that you have some problems. Do you really believe Toshiba should support you and help to get this external peripheral work? In my opinion not. On the market, there are thousands of different devices and laptop computer how of the manufacturer must be able to test each of them and offer a solution?
  Something like that is definitely not possible.

  In my opinion, you should communicate with Mixvibes and ask for help. They have the best experience with own product and I presume that they are testing the features on different PC/laptop platforms.
  They should know how the device should work on new laptops with USB 2.0.

  It seems silly now, but Toshiba has nothing to do with it. If you have a general problem with the USB ports and they don t work with different devices that Toshiba should ask for help.

• Problem with SOAP Plugin work

  Hello, everyone.

  I have a problem with the addition of host to my version of Orchestrator 7.0.1 vRealize (SOAP Plugin 2.0)

  I ' work with workflow 'Add a SOAP host': define a wsdl uri - https://srv-omnitracker.domain.local/OtWS/v1.asmx?WSDL , then choose authentication ntlm and username, password and domain set.

  When I start my workflow, I see an error:

  point: "Add a host of SOAP/item2", indicate: 'impossible', State of the business: "null" exception: "java.lang.NullPointerException (name of the dynamic Script Module: addSOAPHost #8)'"

  workflow: 'Add a SOAP host' (2A828080808080808080808080808080818080800126658240472157fdafc0fce)

  My wsdl as an attachment.

  What is the problem?

  Try the following:

  Replace all occurrences of (there are 4 hits)

  with

  where is the name of the attribute

  In addition, you may need to replace

  with:

  Note that replacements above are only to allow the WSDL file to import successfully. They are not semantically equivalent transformations so there could be some problems when executing when you try to call SOAP operations using some of the changed items.

• A problem with importing Interface Open Payables

  Hello
  
  I am facing a problem with the import of accounts payable of the open Interface...
  
  My requirement is:
  1. need to download the PO, vendor, invoice #, Date of invoice in detail in table custom (via web ADi)
  2. in table storage custom in AP invoice tables interface.
  3. of the call (Payables open Interface Import) the table API Interface, which create the invoive (IN. matched)
  
  Now, if the user gave wrong data a few reasons... Payables open Interface Import rejected this entry... user has this checked and corrected later and trying to create the same correct invoice with the data... As there is a rejection there is a line on the header, line interface interface... Although if it passes the correct data in the second time it is cosidering that rejected row and does not concerned line...
  
  
  The one you suggest on this...
  
  Kind regards
  Bala

  When processing a file, you can check if another ap_invoice_interface record exists for the same invoice number and
  (1) delete the old record, then insert a new
  OR
  (2) update the old record rather than create a new

  Hope this helps,
  Sandeep Gandhi

• SL500, Windows 7: Problems with the interface audio external Firewire and Digitus USB KVM switch

  Hello

  I have an audio interface, Presonus Firestudio Project, which connects via Firewire to my Lenovo SL500. On the Sl500 is Windows 7 x 86 installed. I have also 2 rudders (Akai APC20 and M-Audio UC33e), 1 Midi Interface and a kvm switch connected via USB.

  Almost everytime I make music with Cubase or Ableton Live I get holes in my audio stream. Audio playback stops just freezes for 1-10 seconds and the surface of my DAW. This becomes especially annoying when I record.

  Recently, I have disabled all devices in the BIOS except for Firewire and USB, but I am always running into the same problem. Then I got a look at the system information for Windows 7 and the saw - problems/sharing section - USB and Firewire to share the same IRQ. I'm almost certain that this is the problem causing the audio gaps.

  Is there a way to chanmge in Lenovo Sl500 BIOS IRQ settings?

  Best regards

  belochim

  After Plug and install a USB audio interface that I borrowed from a friend, I noticed that whenever I changed my KVM switch to the surface of the other PC Ableton froze for a second. The audio stream on the other hand kept and just as it was supposed to.

  The KVM switch is a "Digitus Pocket 2-port USB KVM switch" model No. "DS-11402-1".» This KVM switch seem to be a kind of diffusion in the USB bus which then interrupts the audio stream running on Firewire.

• Problem with network interface of Vsphere

  In my interface Vsphere, on an esxi4.1 I see no vswitches and no information, even though in the console, I see this drug ok.

  As I watched in the var and /var/log/vmware/hostd.log I see 3 lines saying:

  Mar 21 14:51:12 pass: [2012-03-21 14:51:12.608 FFDBEE90 error 'NetworkProvider"opID = AD5DBFA0 - 000000 B 7] an error occurred during extraction of virtual switch: interacting with configuration file /etc/vmware/esx.conf error: unlock the ISP ConfigFileLocker
  Mar 21 14:51:12 led: interacting with configuration file /etc/vmware/esx.conf error: I was asked to remove a. LOCK file that I'm not sure is mine.  It is a bad thing and I'm going to fail.  Lock should be released (0)
  Mar 21 14:51:12 pass: [2012-03-21 14:51:12.608 FFDBEE90 error 'NetworkProvider"opID = AD5DBFA0 - 000000 B 7] an error occurred during extraction of virtual switch: interacting with configuration file /etc/vmware/esx.conf error: unlock the ISP ConfigFileLocker
  Mar 21 14:51:12 led: interacting with configuration file /etc/vmware/esx.conf error: I was asked to remove a. LOCK file that I'm not sure is mine.  It is a bad thing and I'm going to fail.  Lock should be released (0)
  Mar 21 14:51:12 pass: [2012-03-21 14:51:12.609 FFDBEE90 error 'NetworkProvider"opID = AD5DBFA0 - 000000 B 7] an error occurred during extraction of virtual switch: interacting with configuration file /etc/vmware/esx.conf error: unlock the ISP ConfigFileLocker
  Mar 21 14:51:12 led: interacting with configuration file /etc/vmware/esx.conf error: I was asked to remove a. LOCK file that I'm not sure is mine.  It is a bad thing and I'm going to fail.  Lock should be released (0)

  In my/etc/vmware, I have a few files that start with ".". # »

  ...

  r - r - r - T 1 root root 0 18 May 2010. #dvsdata.db
  r - r - r - T 1 root root 0 18 May 2010. #esx.conf
  -r - r - r - T 1 root root 170 may 18, 2010. #license.cfg
  r - r - r - T 1 root root 0 18 May 2010. #locker.conf
  r - r - r - T 1 root root 0 18 May 2010. #snmp.xml
  -r - 1 root root 30 T 18 May 2010. #vmware.lic

  ...

  and also the file

  ...

  -rw - 1 root root 39.5 k Mar 21 14:15 esx.conf

  ...

  I would like to mention that on the ESXi virtual machines work, but can not add other elements of networking in Vsphere.

  I have attached a few out of orders for components network (vmknics, vswitches and network cards)

  Help, please!

  I need urgent HELP!

  Oops, you have ESXi but in vmware KB described how to solve the problem for ESX :(

  So that you can attempt to restart management services 'services.sh restart' other options of console - restore previous version esx.conf

• Deployment problem with SOAP?

  Hello

  I work with an application in which I use the Ksoap library but it asks to install the module of SOAP first if is it possible so that we can create only OTA and release of office which first of all install the SOAP than install and then my app.

  Thank you in advanced.

  Kalpesh Tita

  A look at this thread, explained how to install different project using simple JAD COD,

  http://supportforums.BlackBerry.com/T5/Java-development/deploying-multiple-cod-files-with-a-single-j...

• ODI 10.1.3 problem with an interface from a query

  Hi all

  I need to create a new ODI 10 interface from these queries:

  INSERT INTO THE TARGET. DWH_ANAG (cod_b, cod_fis, source, first_date,

  last_date, last_change_date, extract_date)

  SELECT DISTINCT cod_b, cod_fis, 'CN01', sysdate,.

  last_date, sysdate, sysdate

  OF THE SCENE. CN01 one

  WHERE DOES NOT EXIST (SELECT 1

  OF TARGET. DWH_ANAG b

  A. WHEREcod_b= b.cod_b

  and a.cod_fis = b.cod_fis

  )

  AND NOT EXISTS (SELECT 1

  OF TARGET. DWH_ANAG_DELETED c

  A. WHEREcod_b= c.cod_b

  AND a.cod_fis = c.cod_fis );

  It is possible to create a filter on the table of the source using the place where clausole? I don't how can solve this problem. Can you help me please?

  Thanks in advance

  Left outer join means "give all of the left table even if it does not match".  Therefore, if you want non-matches, just check for NULL field primary key of the right table in the join, and you have the desired lines.  The ANSI join syntax makes the designation left and right a little more clear IMO.

  SELECT

  DISTINCT A.cod_b

  a.cod_fis,

  "CN01"

  SYSDATE,

  a.last_date,

  SYSDATE,

  SYSDATE

  Of

  STADIUM. CN01 one

  LEFT OUTER JOIN TARGET. DWH_ANAG b

  ON a.cod_b = b.cod_b AND

  a.cod_fis = b.cod_fis

  LEFT OUTER JOIN TARGET. C DWH_ANAG_DELETED

  ON a.cod_b = c.cod_b AND

  a.cod_fis = c.cod_fis

  WHERE

  b.cod_b IS NULL AND

  c.cod_b IS NULL.

• Problems with the Interface: to hide the panels, cannot

  I've just intsalled InDesign 5, went from version 2. Like many of the interafce but find a very irritating aspect. Hoping it is ignorance and once I'm informed, I can remove the.

  To be clear, I'm not trying to remove signs of the tool, I understand how to move, dock and remove these items from the interface.

  I don't quite know what to call these things, when you open the program (first time), they are long, the length of the screen, the horizontal objects at the top of the screen, Hey, just under the menu. I managed to figure out how to drag, float and dock the but I want to get rid of one, which seems impossible.

  I have a great, 17 "display on my Mac laptop, Intel, with plenty of room on the left and the right for the panels of the tool, but I don't want to eat of vertical space in my view of document for 2 of these"signs"

  2 questions:

  What are these called?

  How can I get rid of them?

  Thank you.

  Uh, Peter, why not simply uncheck the control panel in the window menu? That certainly works to hide completely in Windows.

• sqldeveloper 4.1 UI refresh problem with win7

  Hello

  I have a problem with user interface with windows 7 64 bit sqldeveloper. I downloaded the latest version (4.1.0.19.07), I have improved my jdk (1.8.0_45). my video driver is the latest version. Whenever I run sqldeveloper and try clicking on a menu, nothing happens and if I move the mouse menu somethimes drop-down is displayed one by one.

  Also, I tried everything I found like adding this parameter to sqldeveloper.conf. "AddVMOption - Dsun.java2d.noddraw = true".

  I have a problem with my work and personal laptop.actually, this is not new for me, is the latest version, I use sqldeveloper: 4.0.0.13.

  What should I do?

  Thank you.

  Hello again,

  I guess I think, I compare 4.0.0.13 and the latest versions of conf files and find in older version of the file there is a line "AddVMOption - XX: MaxPermSize = 256 M" when I added this to the latest version, it worked.

  I forgot, I also remove these lines:

  AddVMOption - Dsun.locale.formatasdefault = true

  AddVMOption - Dorg.netbeans.CLIHandler.server = false

• Satellite L870: Problem with USB to serial interface with FTDI chipset

  Hi all

  bought a L870 year last to run software amateur radio via USB to the serial interface.
  Interface uses the FTDI chipset.

  The problem I have is that the switch on the led on the interface flashes green to red several times to indicate that it works, but then must remain on green but task on every minute she goes through the same process again.

  All the controls on the drivers and the Manager of devices indicates that everything is ok. No problem with interface on computers laptops happens or advent.

  Is there anything on the Toshiba laurys usb ports every minute.

  Thanking you in advance for any ideas

  First of all, I must say that there are different models of L870 Satellite on the market supporting different hardware and software. Some are preinstalled with 8 and some Win with Win 7.

  In addition the L870 supports USB 2.0 and USB 3.0 standard.
  If you recommend to check the different USB ports and check if your software works correctly with the USB 3.0 standard.

• Problem with user API 5.0 interface components

  Hello!

  I have a problem with the user interface components.

  My application needs of the analogues of the toolbar and PaneManager (as in api 6 and higher) in BB API 5, but I have no idea how to make them.

  Please, need help

  Toolbar can be made with evenlyspacedhorizontalfieldmanager in the Advanced UI package available on the java dev site of bb.

• Problem with FWSM and the same L3 interface switch

  I have two 6513 s with a 802. 1 q trunk linking them. Each switch is redundant Sup720s running in native mode, worm IOS 12.2 (18) SXF (that they were running out of SXD3). A FWSM (ver 2.3 (3), routed mode, unique context) is in each switch, Setup in failover mode.

  I can't get a PC in a virtual LAN that has the defined layer 3 interface on the switch with the active FWSM in this document, to communicate with the devices 'behind' the FWSM. If I move the configuration of layer 3 to this vlan to the other 6513, everything works fine.

  The MSFCs are inside the firewall, they have a configured layer 3 interface in the same vlan as the FWSM 'inside' interface. Several "same security level" interfaces are defined on the FWSM and used to protect the farms. I use OSPF on the MSFCs and FWSM and the routing table is correct.

  The FWSM generates connections to the attempts made by the PC with interface layer 3 defined on the same switch as the active FWSM very well, so this isn't a problem with FWSM ACL.

  A ping of the FWSM "inside" interface from a PC with the defined layer 3 interface on the same switch as the active FWSM fails, although debug icmp trace on the FWSM demand and response shows. A the packet capture, using the NAM-2, only shows the request packets. I captured on the vlan common and FWSM port channel interface bottom of basket.

  Just to add to the confusion, if I capture in the same places, but do the ping of a PC which is in a VLAN with the interface of layer 3 defined in the 6513 which does not contain the active FWSM, that works very well, I see the request and response on the capture of vlan common, but only on demand on the capture of the port channel.

  This problem has been there since the beginning of this implementation and has not changed with IOS and FWSM software upgrades. I had this experience with all the VLANS that I tried to define the interface of layer 3 to on the switch with the active FWSM. I turned on MLS.

  If anyone has experienced this and solved, or knows what is happening, I would be grateful for any ideas.

  Thank you.

  Keith

  Keith, are you running etherchannel distributed on of your 6513?

• Anyone who has a problem with the system crashes when importing using the new interface to import

  Anyone who has a problem with the system crashes when importing using the new interface to import

  Can specify you what Adobe program you use so that we do that your post is in the right forum?

• Problems with the Firewire Audio Interfaces

  I use a Presonus Firebox for all of my recording and playback. I just bought a new pc HP with Vista64 and I had problems with my audio since then. Symptoms include random audio dropouts, crackling sounds when you scroll through the menus in my software, no noise at all from windows media, no windows generally sound player. Everything works sometimes, but inevitably fails. Once the audio is de-energized my only solution is to restart the computer, and then it still doesn't work sometimes. I don't understand. My last computer was a couple of years and built the hand. It worked perfectly with this unit until the motherboard is dead after what I bought my new HP desktop with terrible results. The main difference between my pc and this one is that I was using XP and XP64. However, I have the right drivers for the home and the computer recognizes it but I can't operate consistantly and correctly. This new HP has more power than my last, and more then enough power for my needs recording software. I would like to know, I've been recording music on PC for 8 years. Any advice would be welcome.

  I am now convinced that the long nightmare is finally over. I tested my home over and over again with no failures. Record and playback midi seem to work perfectly. Here's what I did:
  
  1 optimized my computer for audio streaming using the guide written by sweetwater.com.
  
  2 uninstall all the drivers from Presonus and all software, including the removal of all PreSonus files on the registry using the instructions provided by the technical support of PreSonus.
  
  3 disabled WLAN and then physically disconnected from the motherboard.
  
  4. my computer has two firewire ports. The front port was connected to the motherboard via a short cable. I physically unplugged the cable from the motherboard.
  
  5. I bought an Express(1x) PCI firewire 400 card with a Texas Instruments chipset. The exact brand is inner Pro PCI Express(1x) 4 port 1394 a. The firewire card is a power port. I plugged the power jack on the same line, connected to the DVD player. I don't know if it's important, but I'll try to document EXACTLY what I did. The firewire card requires no driver work. It came with a disc with a B.S. video editing software I was not installed.
  
  6. I turned on my computer and disabled the built-in firewire in Device Manager, leaving only the new active firewire card.
  
  7. I installed the drivers from the Firebox from the original disc supplied with my unit (v1.20.0). I had good results from these pilots in the past that may be because I use XPsp2.
  
  8. I have connected the combustion chamber when prompted to by the installation software.
  
  9. rebooted the computer with the combustion chamber connected and everything's fine.
  
  By the way:
  
  The inner firewire card cost me $ 30.00
  
  My computer specs are:
  HP a6745f desktop
  Dual core AMD 5050e 2.6 GHz
  XP sp2
  GigsRAM 4 (3.25 because I'm on XP)
  
  If you are confused in the store on the question of whether a firewire card uses a Texas Instruments chipset. Try to get a glance at the map. You should see a chip bearing the logo of TI: the State of Texas, w / Ti. YeeeeeeeHawwwww!