problems with tethered capture

Similar Questions

• Problem with video Capture where the connection settings are unavailable

  I have two capture - Dazzle Platinum 100 and Game2 PC cards. The issue is the same with both, so it must be something to do with a setting on my laptop.  I can't access the setting of the video input in the Capture menu of one of the capture software I've tried. I can select the device in the Source menu, but nothing happens when I click on the menus of the video input (the options are missing). As such, I can't select the composite input. The audio seems ok.

  The xbox and tv are connected using a separator and the component drive with connectors yellow, red and white coming on TV and I tried the two Pal 50 and 60 in the settings menu of xbox. I have set the settings to capture PAL and have also tried all the others.

  I also disabled the webcam and uninstalled the webcam software in the case which has been cause of conflict. The dazzle card detects an entry but cela there is no picture, just a white screen with lines. The dazzle card also caused regular dumps while the Game2PC only gives the incorrect parameter error 0 x 80070057/11878 they both.

  I've now provided all that may be in conflict has been uninstalled. I tried to change the capture settings and they are not available. Device Manager checked again and it appears Windows detects the device as device not video and Audio. Why would you think?

  I solved this by downloading a new driver from the manufacturer's website. The disk driver provided seems to have been inconsistent with Windows and caused the device to be considered an audio device only. Windows drivers has also caused this problem.

• Problems with image capture.

  Anyone has this problem. When I connect my iPhone 5 to my macbook and use Image Capture to transfer photos image capture will sometimes see not all the photos. Ex I have 25Photos on the phone, but only sees the image capture 20. The other 5 are displayed.

  Several other similar reports here. No solution.

  If your workflow allows it, use my photo stream to sync your iPhone to your computer. Seems to work more reliably than the manual method.

• I have a problem with the capture tool works not properly on Windows 8.

  Can I change to automatically let me start to select without clicking on New?

  Original title: snipping tool - work when I start it up, the new button has already been clicked but not at home

  Clarification:

  At work, my computer is Windows 7. At home, it is Windows 8. At work when I start the capture tool I have not hit any other button in order to start the selection of the area I want to Snip. The tool is already gray and my mouse is ready to score my selection.

  At home when I start the capture tool, I get the menu, click on 'New' and THEN I can start my selection - one additional click. It annoys me (I know it's small, but I cut a lot) so I was hoping there was a setting I could change how it starts.

  I know that's not exactly a new topic, but I found that I had the same problem.  I found that the cause of this problem actually comes from OneNote believe it or not.  If you have recently updated your Office Suite and now have the ability of OneNote, all you have to do is to open OneNote and configure.  Once you get it configured you can then select the options that you just press the Windows key + S to be able to cut out a screen shot and you can also set it to copy directly to the Clipboard, then there is no need to tap the new button more in the cutting tool.  Hope this makes sense and helps anyone having the same problems I had.

• IDCS5 JS: problem with the "captured" text lose formatting

  Hi all

  Excellent script from Peter Kahrel allows us to convert the notes in endnotes dynamic in IDCS5 after which, we use some of our own JS to enter this text, put it in an orange box and then delete the original text of notes. This works very well but have just realized that the formatting (italics) who was in the original notes text does not survive moved to the new text box. Italics is still protected by a character style.

  Our code;

  //searches for endnotes, puts them in a orange box and adds the "Endnotes" heading
  app.findGrepPreferences = null;
  app.changeGrepPreferences = null;
  app.findChangeGrepOptions.includeFootnotes = true;
  
  var myDoc = app.activeDocument
  var myPara = myDoc.paragraphStyles.item ("Endnotes");
  
  // Find the text & capture its contents to a variable
  app.findGrepPreferences.appliedParagraphStyle = "Endnotes"
  origText1 = app.activeDocument.findGrep (); 
  
  //check if any Endnotes are found, nothing happens if not
  if(origText1.length!=0)
  {
  newText1=origText1[0].contents;
  
  //adds new text frame on 1st page of doc
  var myTextFrame1 = myDoc.pages.item(0).textFrames.add();
  myTextFrame1.geometricBounds = ["6p", "6p", "36p", "36p"];
  
  // Apply the objectStyle to frame
  var myOStyle = myDoc.objectStyles.item("Endnote box");
  myTextFrame1.applyObjectStyle(myOStyle); 
  
  //add captured text to text box
  myTextFrame1.contents = ("Endnotes\r" + newText1);
  
  var myDelete = myDoc.paragraphStyles.add ({name: "Endnotes1", basedOn: myPara});
  
  // Loop to apply paragraph style to text
  var length = myTextFrame1.paragraphs.length
  
  for (var i =0; i<=length-1; i++ )
  {
  //apply para style to new frame contents
  var myStory = myTextFrame1.paragraphs[0].parentStory
  myStory.paragraphs[i].appliedParagraphStyle = "Endnotes1"
  }
  
  //removes original text
  app.findGrepPreferences.appliedParagraphStyle = "Endnotes"
  app.changeGrepPreferences.changeTo="";
  app.documents.item(0).changeGrep();
  
   // remove Endnotes1 paragraph style and replace with Endnotes style
  myDelete.remove (myPara)
  }
      
  else
  {
   }
  

  As you can see enter us the text to a variable using GREP and that place in a new box (preceded by a heading). Make us a copy of the para style 'notes', which allows you to style the copied text, remove any style with the original style (the original formulation) and then delete the new style replacing wiith the original style so that the copied text back to style 'notes' new para. I don't know there's a better way, but it works for what we want - at least I thought that this was the case.

  Any thoughts appreciated gratefully. I searched the forum but couldn't find anything relevant. What Miss me?

  Thank you

  Iain

  Why don't you just "move" the texts found for the box of endNote?

  I suggest the following approach (not tested, project code):

  function moveEndnotesInBox()
  //--------------------------------------
  // Searches for endnotes, puts them in a orange box and adds the "Endnotes" heading
  {
      // Preset findGrep
      // ---
      app.findGrepPreferences = null;
      app.findChangeGrepOptions.includeFootnotes = true;
      app.findGrepPreferences.appliedParagraphStyle = "Endnotes";
  
      // Find the text(s)
      // ---
      var doc = app.activeDocument,
          foundTexts = doc.findGrep(),
          i = foundTexts.length;
  
      // If no 'Endnotes' text is found, return
      // ---
      if( !i ){ alert("No endnote found"); return; }
  
      // Creates a new text frame on 1st page w/ specific
      // bounds, and preset contents
      // ---
      var tf = doc.pages[0].textFrames.add(
          {
          geometricBounds: ['6p', '6p', '36p', '36p'],
          contents: "Endnotes\r"
          });
  
      // Preset obj and parag. style
      // ---
      tf.appliedObjectStyle = doc.objectStyles.itemByName("Endnote box");
      tf.parentStory.paragraphs.everyItem().appliedParagraphStyle = "Endnotes";
  
      // Backup the last insertion point index
      // ---
      var    ips = tf.parentStory.insertionPoints,
          ipx = ips.length - 1;
  
      // Loop through foundTexts and move texts to tf
      // (IMPORTANT: from the last to the first item to preserve Text indices)
      // ---
      while( i-- )
          {
          foundTexts[i].move(LocationOptions.AFTER, ips[ipx]);
          }
  }
  
  moveEndnotesInBox();
  

  Of course you must still deal with the possible lack of returns of paragraph or 'ghost' reference markers. I do not exactly know the context, but it seems not complicated.

  Hope that helps.

  @+

  Marc

• Problem with "Offline Capture device"

  I just installed a new HDMI monitor 2nd on my computer.  He seems to have created a strange problem.  I have a Sony DSR - 11 hooked to my computer by firewire, and if I create a new project in first CS5.5 and try to capture something, the screen displays "device capture offline." But buttons control all playback functions, fast forward, rewind, etc.  It's just that I do not see an image in the preview window and the record button is grayed.  However, if I open an old project, the capture function works perfectly.  Any ideas on what I could do to fix this?

  J. D.

  Hold on!

  DING DING DING DING DING!

  I thought about it!

  I recently captured video from an HDV camera.  The default setting for the capture has always been the value 'HDV '.  When I changed this back to the "DV" everything started working again.

  J. D.

• Problems with video capture in Final cut pro verses first CS5

  The codec used in the capture of a video of the PCF, I cannot import the FCP in first CS5. Video I get clients who capture video in FCP and then send it to me. Is there a different capture format, they can use or y at - it a codec that is available that does not cost a fortune, working first for windows?

  Yes, I am intimately familiar with P2 and edit in Premiere Pro - I have done so for four years. You don't need drivers for P2 unless you are actually mount the card P2 or the camera to your computer. Premiere Pro will edit the images natively without any additional installation. The applies to all formats that can be recorded to P2, including DV, DVCPRO, DVCPRO 50, DVCPRO HD, and AVC-Intra. If someone offers you a complete workout of the P2 files (folder structure) and you can import and edit all these without additional work around.

• Problems with the capture of HDC TM700

  Someone can help me. I have Windows 7, 64-bit

  CS5 Prem Pro system. Get a device of capture in offline mode when you try to

  captures from TM700 (PAL) HDC. Panasonic assures me that it will not work on a 64 bit system, but

  I have read other forums telling me that it is rubbish. Tried to set up the remote control, using the

  vice in standard type. When I'm Laura a panasonic support person what the devi

  type this to use was "Camcorder" I, (and all this time I thought it was a brick house!).

  What should I do now?

  Colin gave you a lot of good advice already, but here is a link for more information regarding ingestion of file-based cameras:

  "Import of assets from tapeless formats.

• Problems of tethered shooting captures with 4.4 Lightroom using Nikon D7000.

  I was taken captive capture mode for about a year, with few problems until recently. I use Lightroom 4.4 in conjunction with a Nikon D7000.  Operating system is Windows 7, 32 bit.    I now get a dialog mssg stating: "a captured file could not be saved.  Your drive is full may or may no longer be accessible. "Both of the drives I use have tons of remaining available storage space.  Any suggestions on how I should start the process with this troubleshooting problem would be greatly appreciated!

  Problems with captive capture turn out to be a problem with my operating system.  I did a system restore to an available restore point just before the beginning of my problems with capture captive.  After having done that, he worked as it should.  Still don't know what was the conflict in operating system, but for now - problem solved.

• I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. Update

  I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. -Update

  1 iphoto sees not iphone - restart

  2 iphoto sees iphone but says "no pictures" - restart

  3 Iphoto sees phone and photos and I click Import all or import selected - then I have problem of file format and nothing is imported

  NOTE: I have similar problems with image capture - sometimes you can see the phone and photos, and sometimes is not

  I have an imac 2015 - execution of yosemite

  Help my new iphone because 7 is coming today and I am terrified of the transfer.

  Not sure, but in any case iPhoto is a dead - it would be really smart to learn pictures (a totally new and different program with a learning curve and different workflows)

  With the help of pictures with my new iPhone 7 and iCloud photo library all works well without any problem - nothing different photos with my iPhone except the news and the best quality Photos 5

  LN

• Printer HP 4500 color scanner: Fixed problem with no detection scanner on Mac 10.6.8

  At the time I upgraded to Panther snow, I experienced a loss of use of the function scanner on my printer HP 4500 scanner so that I am able to use the printer function.  I was advised to try to solve the problem with a Capture of Image Download.  Where can I get the right version and how should I proceed?  Is it free?

  The communication problem that prevented initialization of the printer by the CCM has been resolved by removing the plug from the printer into a power strip and attaching directly to the socket in the wall.  Thanks to the Member who posted the idea.

• Problem with setting window of acquisition on 1429 PCIe capture card

  Hi all

  Recently, I am using the Basler A504k camera with card PCIe-1429 of goodwill for the acquisition of images at high speed. I found problems with setting the acquisition window in the capture card using Measurement & Automation Explorer.

  1. for example, if the size of the original image is 1280 * 500, if I put the window of acquisition with left 0 and width 1280, everything is OK, but if I set the width to 1279, there will be an error (error 0xBFF6002C FIFO overflow caused the acquisition of stop), if I set the width multiple of 8, there was no error. Could someone tell me why in this case, is it because the packet data transfer for acquisition card rule?

  2. the window of acquisition is set according to the camera image, right? If the camera has also a function of area of interest, the acquisition window setting is always the image coming from the camera.

  Attachment is my setting a MAX software.

  Thank you very much

  Hi xiaochunfly,

  My bet is 1280 pixels image size is aligned on 32 bytes, and the material may actually go from line to line without breaking the transfers. With the width of the non-aligned countries, he needs to start a new transfer on each line, and this has an additional load on the PCIe bus and the system memory bus. Currently infrastructure IMAQ trying to adjust to any size of border/size possible image regardless of efficiency, it take the material and changes in recent processor Intel chipsets have reduced effectiveness with system memory bus performs under these conditions. So, you can get much better performance if you use line widths. You can also get the latest IMAQ driver because there was changes in the latest few transfer more effective under some of these conditions.

  AOI is usually under the framegrabber. If you reduce the AOI who sends the camera, it seems often identical to the framegrabber as if you just had a camera with a smaller sensor. Thus, your AOI in IMAQ must be set to the size of that the camera is sending, unless for some reason you want to capture less of what the camera is able to set up on its own.

  Eric

• Problem with table/table and past data capture

  Hi all

  Newbie is back and I have a problem with my program.

  A brief introduction of what I'm trying to do.

  I'll show you a failure to a system event.

  Based on each event, I will need to connect the error description, the tag, the fault start time and duration.

  All the event information will be displayed on the front table and this table will increase when new event occurred.

  For descriptions and tags - this is fixed based on what fault affects, respectively.

  The issue I'm having is to capture time.

  What I have in mind is to use the time to enter the start time and duration also.

  Departure time is not question because once I press boolean = true, it gives the start time.

  For the duration, when I press boolean = false, it wil give the total duration.

  However, I have a problem as follows:

  (1) to capture what a comprehensive data set (for example / / Desc: fault 1, Tag: one, start time: 2008-12-16 11:15:06 duration: 0 00:00:05) and it passed inside the trap fault Table.

  (2) if the same failure has occurred, it will overwrite the latest information. However, I need to keep the display of old and new events.

  Please notify.

  Opinions and suggestions are welcome mosssssst.

  Million thanks in advance.

  Hi Roziela,

  Thanks for the post and I hope that your well today.

  You must add logic to detect the change of the event (no fault to fault) and produce a Boolean result by 'raising' edge.

  I have a code to do this,

  

  Let me know what you think,

• Problem with Capture Date & time change

  I just became aware of a problem with the Date of Capture use to is very strange. Initially, a brief explanation of the import workflow I'm used with jpeg image 6 iPhone since Lightroom Mobile was presented. The images appear in the section of times iPhone app Photo, and from there I transfer to a collection in Lightroom Mobile. Once the collection syncs to Lightroom on my Mac (running latest El Capitan), they sort by capture time and I make choices and rename images. I have a naming preset that adds automatically the date to all the images. Recently, I noticed that some of these images, but not all, have been appointed with the wrong date. I had traveled without my computer - only my iPad, and it was a month before the images have been synced on my Mac it was very obvious that the dates were incorrect. The problem may have expressed earlier, but if the date was off by a day or two he would not have been as sensitive.

  The problem occurs when I take pictures with the app in time of MomentLens company. I use the application because it is designed to work with instant attachment lenses and the case of the Moment (which makes no difference in time to capture problem).

  
  

  Once that the images are added to LR Mobile news for images show good capture date and time. That's when they images sync for LR (latest version) that the problem occurs. And this is not a problem of LR Mobile, such as changes of date and hour occur if images of the iPad are added to LR without using mobile LR (from the iPad to Mac with AirDrop). Looking at the EXIF metadata Panel in LR, images taken with the iPhone camera app show three dates: Date time Original Date time digitized and Date time - all the which three are the same. Show only pictures taken with the application of the time Date time, but it's the same as in the iPhone Photo app and in LR Mobile capture time. However, when I show info on imagine in Lightroom, the time that appears to capture the time is the time that the image has been synchronized (if it came at LR Mobile) or the time that the image has been added to the iPad over wifi. It is also the time that is added to the preselection of naming. Note that if I send a picture directly from the iPhone to the Mac with AirDrop the date and time is correct.

  For the life of me, I can't understand this anomaly. I did thorough Imaging tests, and it happens only with the application of the time - other camera apps do not exhibit this problem. Interestingly, LR recognizes both the time Soft, which is reported under EXIF on the range of software and the lenses of the Moment when it is used with the iPhone the Moment case.

  If anyone has any ideas I'd be pleased to entrance. Thank you

  The link to the file is Dropbox - Photo of the Moment

  I have just confirmed with Exiftool that the sample file does not EXIF:DateTimeOriginal, although it does not contain EXIF:DateTime.

  You can send the following to the current time, the EXIF 2.3 specification:

  

  

• Capture problems with the Vixia HV30

  Hi all

  I fought for hours to get the Premiere Pro CS5 to capture video from a camcorder, Canon Vixia HV30 (1080i, uses miniDV tapes).  A camera via HDMI connection has no effect (no control, no option to select HDMI for input), so all my attempts have been through the IEEE 1394 (Fire Wire) connection.  Regardless of what I try, I get a message "Capture Offline device".

  The project is implemented with HDV as the capture format in 1080i, 30 frames per second.  Sometimes, when I go to the tab settings in the Capture window, and then click Options under the control of the device, he says even the camera as 'detected '.  Other times it lists the camera as "offline".  Quite frankly, I can't deduct more reason why it is connected sometimes and other times offline.

  When I go to "Devices and printers" in the Win7 start menu, the Vixia HV30 is listed as a device (when it is connected and turned on of course).  That tells me that the computer, at least, can see the camera, and the problem is most likely in the software.

  Questions that I tried to solve this problem include several reboots, a relocation complete software and countless settings of the device control options.  Nothing works.  Therefore, I now turn to someone of you all who know what kind of things better than me.

  In addition to this survey, I am hunting for the software supplied with the camcorder, in the hope that I can capture video in this way and import it in first.  Still... I paid a lot of money for this professional program, and I would not think that some cheap Canon programs can cannot this as Adobe (so far).

  See you soon,.

  
  Erik

  99% of the cases where people have problems with the plug, especially Canon Vixia line, it boils down to:

  1. problem with the firewire driver Windows. You must install the driver "Heritage." Around 60-70%

  2 camera ajust. About 20-25%

  3. defective cable or port FW or operator error. The rest of the case.

  If and that's a big if, the driver is correctly installed and the camera is configured correctly and you are sure that you have is no OE, then you can try to capture with for HDV HDVSplit or Scenalyzer to DV material, which allows to see.

  You can also do a search here, there have been dozens of discussions on this matter, that is why the figures of the above experience.