Problems with the Dell place 7 4.3 update

Similar Questions

• I encountered the problem with the last iOS 9.3.2 update I can't receive call from people, I can call any body, but when l'm calling people any body can ring me just now, I thing the problem where new soft

  I encountered the problem with the last iOS 9.3.2 update I can't receive call from people, but I can call any body, but when l called people any body can ring me only at this time, I think that the problem of the new update. can u check this and answer my question.

  and my phone

  iPhone 6plus

  You see a Crescent Moon at the top of the screen icon? If Yes, disable does not bother to: settings - do not disturb = Off.

• Problem with the Dell powerconnect 5424

  Hi all!!

  I got 2 switch dell powerconnect 5424. I set them up with an IP and everything goes well (for now).

  But when I connect a switch on the network I have this message:

  1 January 2000 00:01:07 % STP-W-PORTSTATUS: g21: STP Forwarding State
  1 January 2000 00:01:27 % STP-W-PORTSTATUS: g21: STP Blocking status
  1 January 2000 00:01:27 % STP-W-LOOPBACKDET: g21: STP loop detection.
  1 January 2000 00:01:42 % STP-W-LOOPBACKDETRSLV: g21: fixed STP loop detection.

  I do not understand because there is only the network (port 21) and my computer that are not connected so no possible closure.

  There is the same problem with the second switch, so I think this isn't a hardware problem.

  Someone has an idea to help me?

  Thank you

  
  

• Problem with the Dell Dock shortcuts

  I put a shortcut on my Dell dock some time ago, since then I deleted and added another shortcut to replace. Whenever I restart the computer, the old shortcut is back and my new must reset again. I tried the lock settings, but it always comes back to the old shortcuts on each reboot. How can I get the dock to hold its changed settings?

  Hello

  Willl you must contact Dell about this, because they provide you with the Dell Dock.

  Try asking their Support forums.

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• Problem with the Dell recovery and backup system

  Hello

  I have problem with dell backup and restore in my dell laptop (inspiron15). When I select the backup factory option > choose a drive then continues, he said 'Please sustained insert blank to keep media. "
  However, blank disc is already inserted and formatted with the live file system. Please help if anyone has the solution.

  Thank you

  Hello

  Thanks for your reply.

  Usually, the blank DVDs would be already formatted and ready to use as they are writing discs once. Please try to create the backup disk without formatting the DVD.

• problem with the dell integrated webcam

  Hi guys

  I have dell inspiron 3542

  IAM facing a problem with my built-in webcam. whenever I run it it says connect a supported device.

  I use win 7 6

  bit

  Hi SAMAR-,.

  When the issue started? Which application you use for the webcam? Built in mic work well? The webcam is detected in Device Manager?

  Update the BIOS - http://dell.to/1TO5Xcf

  Run all windows updates and check again.

  Create a new account admin and check - http://bit.ly/1Bgok2R

  Run the test of the webcam and the microphone in pccheckup - http://dell.to/1NEc1Y4

  Restart button f12 system and press on start - choose the diagnosis. Let run diagnostic tests and if you encounter errors - take note of the full error even report for us.

  If the system is under warranty, write me a private conversation with the service number and contact details and attach a screenshot of the Device Manager with expanded imaging devices.

  Keep us updated.

• Windows 7 problem with the Dell XPS 15 laptop (L502x)

  Dear friends,

  Greetings!

  I need your assistance related to a problem, I was confronted with my Dell XPS laptop computer L502x purchased in the United Kingdom a couple of years back. In fact, I tried to update my system for windows-10 de-windows 7 Home Premium (originally installed) via windows update. Later, due to some display problems driver I had to return to the former. But, as soon as I returned my windows for windows 7 HP, it stopped at day no more and I was constantly receives the message from windows update that always ends with a constant error message; so the update process has failed every time.

  Therefore, I want to restore my laptop to factory through the restore partition settings that already exist in my machine, the "repair" option does not appear (snapshot attached) when I hit the F8 key. I wonder if there is another option available to use this recovery partition to recover my laptop to factory State. Please suggest me the solution so that I can do what is necessary to restore my machine to the factory settings.

  I can't wait to have an encouraging response from you.

  Best,

  Adnan!

  If the Ctrl key pressed, while pressing the F11 key repeatedly (about once per second) at startup does not work, it means that the recovery partition no longer exists.  If this is the case, you cannot restore to the factory.

  This would also be the case if the hard drive has been replaced.

• Problem with the Dell Optiplex 755.

  Have a refurbished Dell Optiplex 755 with windows 7, only a few months ago.  Sometimes the screen rises all yellow and you can't get out.  Sometimes screen goes all black but if you click anywhere on the screen with the mouse will go up all that is behind the screen where you clicked, but you must do it all over the screen to see what is there.  Now the last week or so whenever you leave the computer and return windows has recovered from an unexpected shutdown down.  Can someone tell me what could happen?

  This behavior indicates a video problem.

  A cable loose or damaged video from your computer to the screen.

  A failed video monitor.

  This computer has a separate video card?  If the cable connected to the back of the PC is vertical, the answer is probably no.  If it's a separate video card, you need to open the PC and remove, then reinsert the video card - its called re-seats of the Board of Directors.

  How old is follow you and what type is - LED or CRT.  Is - this really really heavy?

  Remove and check the end of the thread and examine the tiny pins in the connector, none of them are bent?

  The judgment is not likely related to changing the color on your screen.  A number of things that cause, but you need to check your hard drive and check the temperature inside the box.

  Turn off the power.  Hold the button for 7 seconds.  Open the case and see if there is a lot of dust.  Have one of those cans of compressed air.  Blow off the dust from the case.  Pay special attention to the fan on the processor with the fins of the radiator aluminum under him.  Make sure that it is free as well as fans of dust.

  You should test the hard drive to ensure that it is not a failure.  If you tell us the manufacturer of the drive, we can tell you where to find the appropriate software.  In the text box above the globe on the left lower part of peripheral type.  Type of device.  Click on Device Manager.  In the window that appears, click the small arrow to the left of the disc.  Send us the model number, you can see it.

• Some problems with the Dell U2713H monitor profiling

  I bought the Dell U2713H monitor.

  I can't find a lot of answers for profiling it. Company Dell does not have any instructions on this subject - so I think it's very bad.

  For example, I am interested in the following questions:

  I create profiles with ' Solution of Calibration Dell UltraSharp"and i1Display Pro.»

  They record the monitor LUT directly, or LUT-video card?

  Now I did 4 profiles, but it is not clear what profile using mode CAL1 oder CAL2 my monitor color space?

  For example. I made a profile with the color space sRGB, but I did not see it in any mode CAL1, CAL2 oder overall.

  Download and install them DA 1.5.3:
  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?DriverID=VJVPH

  Then make sure that yout GPU does not apply "color improvements."

  Run DA and select calibration target and slot of calibration HW store. For example:

  -Preset: sRGB, 120cd/m2

  ICC - version 2 (a MUST to validate it with 3rd party applications), Bradford or CIECAT02 chromatic adaptation, table function, 400 patches, "calibration 1" profile = CAL1 slot

  Once completed, it will ask for a file name, for example, you choose "U2713H_CAL1.icm" and click OK. The profile will be created and set as the default profile for the screen of your operating system Wndows.

  Lunge CAL1 has been stored in a LUT3D of calibration of the "sRGB" @ 120cd/m2. In "U2713_CAL1.icm", it is stored:

  -a linear LUT (output = input), clealing all calibration in GPU

  -actual behavior of range and gamma of OSD CAL1 predefined after calibration.

  It goes the same for CAL2.

  Don't forget that most applications like Photoshop need color management real mode the monitor OSD to have their good active ICM as a 'default' before opening this color managed application.
  For example, if you calibrated CAL2 = AdobeRGB and have a U2713_CAL2.icm, and you want use CAL2 in Photoshop, this profile must be defined as a default value in the OS color management prior to Photoshop.

• Problems with the PC at startup after installing update KB980248

  I'm not computer savvy very so I will try my best...

  A few weeks ago, I ran update KB980248 the next morning, when I turned on the pc it seemed to freeze on the startup screen displays the Dell logo and bottom right, he had the F2 and F12 options. Finally, he went to a black screen and says something to start from the cd or less, was the SATA a bunch of times.

  I was finally able to get the pc to boot, but it took a while... from some things in here, I saw how to uninstall the update and hide. I disabled automatic update settings and everything seems to be ok. However, my husband is updated and now it happens the same thing for another update... I had to boot into safe mode, but then I constantly get the boot to say cd black screen and then comes sometimes with a word on the hard disk and press F1 to continue and another option.

  I talked to a friend who is informed pc and it said to reinstall windows, that something is wrong with the pc because it shouldn't do it for all the updates. I have no problems until I installed the update in the title.

  Should I reinstall windows, or is there a solution?

  Hi Cape_g,

  Your friend has suggested that this should not happen with all updates. I would also recommend to run a re-install/repair of Windows.
  However, you can try to set up the machine in a clean boot state and check what is happening:
  http://support.Microsoft.com/kb/929135

  To perform a repair installation, you can try the following procedure:
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Concerning
  Terminator

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Anyone having problems with the latest OS 10.2.1 update?

  All day I received emails from customers saying that my applications have problems, some not even work at all. "Since I've updated my phone yesterday" is what I keep seeing. In particular, there seems to be a problem with my webview. People get weird certificate errors when you try to connect through OAuth2 in a webview. Or Web mode is not displayed correctly. Very very strange! And I tested and using the latest 10.2.1 leak for a while, so what could be different from the official version that is causing so many errors?

  Is there anyone else out there of the problems suddenly?

  I'm actually questions similar experience now with my camera which has not been updated. I get these errors of certificate for domain SoundCloud. See the attached screenshot. In my application or in the browser, SoundCloud.com triggers security certificate warning. And the reason is weird, said the site expired on June 2015 certificate?

  Something has changed definitely take a look at this...

  http://supportforums.BlackBerry.com/T5/BlackBerry-Z10/Z10-browser-certificate-expired-bug/m-p/275610...

• Problem with the Dell U2913WM color bands

  The monitor works perfectly well for a month and I come home and found this annoying problem today.

  

  Does anyone know what caused her or how to fix it?
  Thank you very much.

  Hi goldbranch,.

  Make sure that the video cable, the monitor is connected correctly and is secure. You can also try using a known good cable and see if that makes a difference. If the case the problem persists, you can reset the monitor to factory State, and also run a self test on it.

  To run the self-test:

  1. Turn off your computer and monitor.
  2. Unplug the video cable from the back of the computer. In order to ensure the proper functioning of the Self Test, remove the cable digital (white connector) and the analog (blue connector) cable to the back of the computer.
  3. Turn on the monitor.
  4. The floating dialog box should appear on-screen (against a black background) if the monitor cannot detect a video signal and is working correctly. In self-test mode, the power led remains lit green.
  Please let me know how the floating box appears on the screen.
   
  To reset your monitor:
   
  1. Use the OSD (On Screen Display) button to go to "other settings".
  2. Select 'Factory Reset' reset all settings as shown in the image below:

  
  In case the problem is not resolved, try using this monitor with any other system and see if it works fine.
   
  Keep me posted. Just reply to other questions.

• Problem with the Dell 720 printer.

  I can't get my printer dell 720 work, guard saying driver not installed

  Hello

  Dell only supports and supplies pilots in this model of printer for Windows 2000, XP and Vista 32 bit.

  Here is the link to your printer:

  http://www.Dell.com/support/home/us/en/19/product-support/product/Dell-720/drivers

  If you have Windows 7 32-bit operating system and the 32-bit printer Vista drivers do not work, it's time to upgrade your printer.

  See you soon.

• problem with the dell launch ' application Adobe first CC 2015.1

  Firma problema:

  Problem event name: APPCRASH

  Nome application: Adobe first Pro.exe

  Application version: 9.1.0.174

  Application timestamp: 564dce25

  Nome modulo con if: DNxHR.dll

  Versione modulo con if: 2.1.0.9

  Timestamp modulo con if: 55352343

  Codice exception: c000001d

  Offset exception: 000000000000f4c9

  SO version: 6.1.7601.2.1.0.768.3

  Locali impostazioni ID: 1040

  Additional information 1: b14f

  Further information 2: b14f0bb255ff1fda75b2218f14e23e1b

  Further information 3: 1a8d

  More information 4: 1a8d695bd80513a1d5d2f39f3606178d

  Leggere informativa sulla privacy online:

  http://go.microsoft.com/fwlink/?linkid=104288 & clcid = 0 x 0410

  SE informativa sulla privacy online no e disponibile, quella leggere offline:

  C:\Windows\system32\it-IT\erofflps.txt

  Hi stephanie,.

  For a fix, update for first Pro CC 2015 (9.2).

  Thank you

  Kevin