Problems with the easy VPN server
I have configured my 1841 with IOS 1841-advsecurityk9 - mz.124 - 4.T.bin.
It is a piece of config:
AAA authentication login userauthen local
AAA authentication login sdm_vpn_xauth_ml_1 local
crypto ISAKMP policy 1
BA 3des
md5 hash
preshared authentication
Group 2
life 300
!
ISAKMP crypto client configuration group vpnipsec
Cisco key
XXXXX of the DNS
pool ippool
!
Crypto ipsec transform-set xxxxx
!
crypto dynamic-map SDM_DYNMAP_1 1
security-association the value idle time 300
game of transformation-ESP-3DES-MD5
market arriere-route
!
card crypto SDM_CMAP_1 client authentication list sdm_vpn_xauth_ml_1
map SDM_CMAP_1 isakmp authorization list sdm_vpn_group_ml_1 crypto
client configuration address map SDM_CMAP_1 crypto answer
map SDM_CMAP_1 65535-isakmp dynamic SDM_DYNMAP_1 ipsec crypto
point-to-point interface ATM0/0/0.1
Description ConnessioneADSL
IP address 82.185.xx.xx 255.255.255.248 secondary
IP address 88.33.xx.xx 255.255.255.252
NAT outside IP
IP virtual-reassembly
map SDM_CMAP_1 crypto
PVC 8/35
!
Is the error I get via the CVPN Client
52 10:46:41.936 01/31/06 Sev = Info/4 IKE / 0 x 63000014
RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:no_proposal_chosen)="" from="">
And what fails.
Any sugestion?
Thank you
Hello
You can try to connect to 88.33.x.x instead of 88.185.x.x ip ip?
We had similar problems a bit when we were trying to establish the same thing with the secondary ip address and has resolved once we changed it to the primary ip address...
regds
Tags: Cisco Security
Similar Questions
-
Help with the easy VPN server with LDAP
Hello
I used to be able to set up our easy VPN server with local authentication.
But now, I'm trying to use LDAP authentication to match with our policies.
Can someone help me please to check the config and tell me what is wrong with him?
My router is a Cisco1941/K9.
Thank you in advance.
Ryan
Current configuration: 5128 bytes
!
! Last configuration change at 13:25:16 UTC Tuesday, August 28, 2012, by admin
! NVRAM config update at 05:03:14 UTC Monday, August 27, 2012, by admin
! NVRAM config update at 05:03:14 UTC Monday, August 27, 2012, by admin
version 15.2
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
router host name
!
boot-start-marker
boot-end-marker
!
!
!
AAA new-model
!
!
AAA group ASIA-LDAP ldap server
Server server1.domain.net
!
AAA authentication login ciscocp_vpn_xauth_ml_1 local
AAA authentication login ASIA-LDAP-AUTHENTIC ldap group ASIA-LDAP
local VPN_Cisco AAA authorization network
Group ldap AAA authorization network ASIA-LDAP-ASIA-LDAP group authorization
!
!
!
!
!
AAA - the id of the joint session
!
!
No ipv6 cef
!
!
!
!
!
IP domain name domaine.net
IP cef
!
Authenticated MultiLink bundle-name Panel
!
Crypto pki token removal timeout default 0
!
Crypto pki trustpoint TP-self-signed-765105936
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 765105936
revocation checking no
rsakeypair TP-self-signed-765105936
!
!
TP-self-signed-765105936 crypto pki certificate chain
certificate self-signed 01
30820229 30820192 A0030201 02020101 300 D 0609 2A 864886 F70D0101 05050030
2 060355 04031325 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 30312E30
69666963 37363531 30353933 36301E17 313230 36323630 39323033 0D 6174652D
355A170D 2E302C06 1325494F 03550403 32303031 30313030 30303030 5A 303031
532D 5365 6C662D53 69676E65 642D 4365 72746966 69636174 652 3736 35313035
06092A 86 4886F70D 01010105 39333630 819F300D 00308189 02818100 0003818D
C1B7E661 4893D83A EFE44B76 92BAA71A 6375 854 C 88 D 4533E51A 49791 551D8EF7
F82E2432 E65B401D 27FE4896 2105B38A CB1908C1 9AE2FC19 8A9393C3 1 B 618390
EE6CB1CC 5C8B8811 04FA198E 16F3297B 6B15F974 13EE4897 97270547 31 74270
4590ACA6 68606596 97C5D4D5 462CACA0 CDDAC35A 17415302 CFD4E329 8E7E542D
02030100 01A 35330 03551 D 13 51300F06 0101FF04 05300301 01FF301F 0603551D
23041830 1680142E FF686472 569BCCF1 552B 1200 1 060355 5B660F30 D35060DB
1D0E0416 04142EFF 9BCCF155 68647256 2B1200D3 5060DB5B 660F300D 06092 HAS 86
01010505 00038181 00558F64 05207 D 35 AA4BD086 4579ACF6 BCF6A851 4886F70D
1D0EA15B 75DBFA45 E01FBA5C 6F827C42 1A50DD11 8922F1E5 3384B8D8 8DD6C222
0187E501 82C1C557 8AD3445C A4450241 75D771CF 3A6428A6 7E1FC7E5 8B418E65
74D265DD 06251C7D 6EF39CE9 3 D FE03F795 692763 AE865885 CFF660A5 4C1FF603
3AF09B1E 243EA5ED 7E4C30B9 3A
quit smoking
license udi pid CISCO1941/K9 sn xxxxxxxxxxxISM HW-module 0
!
!
!
secret admin user name of privilege 15 5 $1 rVI4$ WIP5x6at0b1Vot5LbdlGN.
ryan privilege 0 0 pass1234 password username
!
redundancy
!
!
!
!
!
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
Configuration group customer isakmp crypto VPN_Group1
xxxxxxxxxxxx key
DNS 10.127.8.20
pool SDM_POOL_1
ACL 100
netmask 255.255.255.0
ISAKMP crypto ciscocp-ike-profile-1 profile
match of group identity VPN_Group1
authentication of LDAP-ASIA-AUTHENTIC customer list
whitelist ISAKMP ASIA-LDAP-authorization of THE
client configuration address respond
virtual-model 1
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
Profile of crypto ipsec CiscoCP_Profile1
game of transformation-ESP-3DES-SHA
set of isakmp - profile ciscocp-ike-profile-1
!
!
!
!
!
!
!
interface Loopback0
IP 10.127.15.1 255.255.255.0
!
the Embedded-Service-Engine0/0 interface
no ip address
Shutdown
!
interface GigabitEthernet0/0
IP xxx.xxx.xxx.xxx 255.255.255.224
automatic duplex
automatic speed
!
interface GigabitEthernet0/1
IP 10.127.31.26 255.255.255.252
automatic duplex
automatic speed
!
type of interface virtual-Template1 tunnel
IP unnumbered Loopback0
ipv4 ipsec tunnel mode
Tunnel CiscoCP_Profile1 ipsec protection profile
!
local IP SDM_POOL_1 10.127.20.129 pool 10.127.20.254
IP forward-Protocol ND
!
IP http server
local IP http authentication
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
!
IP route 0.0.0.0 0.0.0.0 GigabitEthernet0/0
IP route 10.0.0.0 255.0.0.0 10.127.31.25
IP route 10.127.20.128 255.255.255.128 GigabitEthernet0/0
!
Note access-list 100 category CCP_ACL = 4
access-list 100 permit ip 10.0.0.0 0.255.255.255 everything
!
!
!
!
!
!
!
LDAP attribute-map ASIA-username-map
user name of card type sAMAccountName
!
Server1.domain.NET LDAP server
IPv4 10.127.8.20
map attribute username-ASIA-map
bind authenticates root-dn CN = xxx\, S1234567, OU = Service accounts, OR = Admin, OU = Acc
DC = domain, DC = net password password1
base-dn DC = domain, DC = net
bind authentication-first
!
!
control plan
!
!
!
Line con 0
line to 0
line 2
no activation-character
No exec
preferred no transport
transport of entry all
output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
StopBits 1
line 67
no activation-character
No exec
preferred no transport
transport of entry all
output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
StopBits 1
line vty 0 4
transport telnet entry
!
Scheduler allocate 20000 1000
endRouter #.
Ryan,
It seems that you are facing the question where it is indicated in the section:
Problems with the help of "authentication bind first" with user-defined attribute maps:
* Then you are likely to see a failure in your authentication attempt. You will see the error message "Invalid credentials, result code = 49. The newspapers will look something like the journals below: *.
Which is the same error you see. Go ahead and replace in your attribute map and test again.
If you remove the command "bind-first authentication' configuration above, everything will work correctly.
https://supportforums.Cisco.com/docs/doc-17780
Tarik Admani
* Please note the useful messages *. -
Cannot connect to the easy VPN server
Hi *.
I have a stupid problem with my easy VPN server. I took the following configuration to configure the VPN: click on
Successfully, I can ping 192.168.99.1 but when I start AnyConnect (enter this IP address as serveraddress) on my IPhone, it first says that the server certificate is not valid (I ignore because it is self-signed..) and when I press continue it says that no link could be established.
What can be the problem?
It is very likely that you have a configured PAT-pool and simply use the Word key "overload" when from your external interface. In this command, you reference an ACL (or an ACL in a road map) where we need to ensure that your VPN-pool in included in the traffic using a NAT.
--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni -
Problem with the Cisco VPN and Vista client
Hello
I have an easy VPN server configured on a c2811 and users use the Cisco VPN client. Lately, I have users running Windows Vista 64 bit and I need to know what is the correct version of the vpn client, I have to use and the compatibility problems with the server, I configured.
Thank you and best regards.
Cisco VPN Client doesn't have any version that is compatible with Vista 64 bit OS. The only customer that Cisco has released that supports the 64 bit OS's AnyConnect, but it is only supported on the CISCO ASA Appliance
-
CANNOT ACCESS THE LAN WITH THE EASY VPN CONFIGURATION
Hello
I configured easy vpn server in cisco 1905 SRI using ccp. The router is already configured with zone based firewall. With the help of vpn client I can reach only up to the internal interface of the router, but cannot access the LAN from my company. I need to change any configuration of ZBF since it is configured as "deny everything" from outside to inside? If so that all protocols should I match? Also is there any exemption of NAT for VPN clients? Please help me! Thanks in advance.
Please see my full configuration:
Router #sh run
Building configuration...Current configuration: 8150 bytes
!
! Last modification of the configuration at 05:40:32 UTC Wednesday, July 4, 2012 by
! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
router host name
!
boot-start-marker
boot-end-marker
!
!
Passwords security min-length 6
no set record in buffered memory
enable secret 5 xxxxxxxxxxx
!
AAA new-model
!
!
AAA authentication login default local
AAA authentication login ciscocp_vpn_xauth_ml_1 local
AAA authorization exec default local
AAA authorization ciscocp_vpn_group_ml_1 LAN
!
!
!
!
!
AAA - the id of the joint session
!
!
No ipv6 cef
IP source-route
no ip free-arps
IP cef
!
Xxxxxxxxx name server IP
IP server name yyyyyyyyy
!
Authenticated MultiLink bundle-name Panel
!parameter-map local urlfpolicy TSQ-URL-FILTER type
offshore alert
block-page message "Blocked according to policy"
parameter-card type urlf-glob FACEBOOK
model facebook.com
model *. Facebook.comparameter-card type urlf-glob YOUTUBE
mires of youtube.com
model *. YouTube.comparameter-card type urlf-glob CRICKET
model espncricinfo.com
model *. espncricinfo.comparameter-card type urlf-glob CRICKET1
webcric.com model
model *. webcric.comparameter-card type urlf-glob YAHOO
model *. Yahoo.com
model yapoparameter-card type urlf-glob PERMITTEDSITES
model *.parameter-card type urlf-glob HOTMAIL
model hotmail.com
model *. Hotmail.comCrypto pki token removal timeout default 0
!
Crypto pki trustpoint TP-self-signed-2049533683
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 2049533683
revocation checking no
rsakeypair TP-self-signed-2049533683
!
Crypto pki trustpoint tti
crl revocation checking
!
Crypto pki trustpoint test_trustpoint_config_created_for_sdm
name of the object [email protected] / * /
crl revocation checking
!
!
TP-self-signed-4966226213 crypto pki certificate chain
certificate self-signed 01
3082022B 30820194 02111101 300 D 0609 2A 864886 F70D0101 05050030 A0030201
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43647274 31312F30
69666963 32303439 35323236 6174652D 3833301E 170 3132 30363232 30363332quit smoking
encryption pki certificate chain tti
for the crypto pki certificate chain test_trustpoint_config_created_for_sdm
license udi pid CISCO1905/K9 sn xxxxxx
licence start-up module c1900 technology-package datak9
username privilege 15 password 0 xxxxx xxxxxxx
!
redundancy
!
!
!
!
!
type of class-card inspect entire tsq-inspection-traffic game
dns protocol game
ftp protocol game
https protocol game
match icmp Protocol
match the imap Protocol
pop3 Protocol game
netshow Protocol game
Protocol shell game
match Protocol realmedia
match rtsp Protocol
smtp Protocol game
sql-net Protocol game
streamworks Protocol game
tftp Protocol game
vdolive Protocol game
tcp protocol match
udp Protocol game
match Protocol l2tp
class-card type match - all BLOCKEDSITES urlfilter
Server-domain urlf-glob FACEBOOK game
Server-domain urlf-glob YOUTUBE game
CRICKET urlf-glob-domain of the server match
game server-domain urlf-glob CRICKET1
game server-domain urlf-glob HOTMAIL
class-map type urlfilter match - all PERMITTEDSITES
Server-domain urlf-glob PERMITTEDSITES match
inspect the class-map match tsq-insp-traffic type
corresponds to the class-map tsq-inspection-traffic
type of class-card inspect correspondence tsq-http
http protocol game
type of class-card inspect all match tsq-icmp
match icmp Protocol
tcp protocol match
udp Protocol game
type of class-card inspect correspondence tsq-invalid-src
game group-access 100
type of class-card inspect correspondence tsq-icmp-access
corresponds to the class-map tsq-icmp
!
!
type of policy-card inspect urlfilter TSQBLOCKEDSITES
class type urlfilter BLOCKEDSITES
Journal
reset
class type urlfilter PERMITTEDSITES
allow
Journal
type of policy-card inspect SELF - AUX-OUT-policy
class type inspect tsq-icmp-access
inspect
class class by default
Pass
policy-card type check IN and OUT - POLICIES
class type inspect tsq-invalid-src
Drop newspaper
class type inspect tsq-http
inspect
service-policy urlfilter TSQBLOCKEDSITES
class type inspect tsq-insp-traffic
inspect
class class by default
drop
policy-card type check OUT IN-POLICY
class class by default
drop
!
area inside security
security of the OUTSIDE area
source of security OUT-OF-IN zone-pair outside the destination inside
type of service-strategy check OUT IN-POLICY
zone-pair IN-to-OUT DOMESTIC destination outside source security
type of service-strategy inspect IN and OUT - POLICIES
security of the FREE-to-OUT source destination free outdoors pair box
type of service-strategy inspect SELF - AUX-OUT-policy
!
Crypto ctcp port 10000
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
crypto ISAKMP policy 2
Group 2
!
ISAKMP crypto client configuration group vpntunnel
XXXXXXX key
pool SDM_POOL_1
include-local-lan
10 Max-users
ISAKMP crypto ciscocp-ike-profile-1 profile
vpntunnel group identity match
client authentication list ciscocp_vpn_xauth_ml_1
ISAKMP authorization list ciscocp_vpn_group_ml_1
client configuration address respond
virtual-model 1
!
!
Crypto ipsec transform-set TSQ-TRANSFORMATION des-esp esp-md5-hmac
!
Profile of crypto ipsec CiscoCP_Profile1
game of transformation-TRANSFORMATION TSQ
set of isakmp - profile ciscocp-ike-profile-1
!
!
!
!
!
!
the Embedded-Service-Engine0/0 interface
no ip address
response to IP mask
IP directed broadcast to the
Shutdown
!
interface GigabitEthernet0/0
Description LAN INTERFACE-FW-INSIDE
IP 172.17.0.71 255.255.0.0
IP nat inside
IP virtual-reassembly in
security of the inside members area
automatic duplex
automatic speed
!
interface GigabitEthernet0/1
Description WAN-INTERNET-INTERNET-FW-OUTSIDE
IP address xxxxxx yyyyyyy
NAT outside IP
IP virtual-reassembly in
security of the OUTSIDE member area
automatic duplex
automatic speed
!
interface Serial0/0/0
no ip address
response to IP mask
IP directed broadcast to the
Shutdown
no fair queue
2000000 clock frequency
!
type of interface virtual-Template1 tunnel
IP unnumbered GigabitEthernet0/0
ipv4 ipsec tunnel mode
Tunnel CiscoCP_Profile1 ipsec protection profile
!
local IP SDM_POOL_1 172.17.0.11 pool 172.17.0.20
IP forward-Protocol ND
!
no ip address of the http server
local IP http authentication
IP http secure server
!
IP nat inside source list 1 interface GigabitEthernet0/1 overload
IP route 0.0.0.0 0.0.0.0 yyyyyyyyy
IP route 192.168.1.0 255.255.255.0 172.17.0.6
IP route 192.168.4.0 255.255.255.0 172.17.0.6
!
access-list 1 permit 172.17.0.0 0.0.255.255
access-list 100 permit ip 255.255.255.255 host everything
access-list 100 permit ip 127.0.0.0 0.255.255.255 everything
access-list 100 permit ip yyyyyy yyyyyy everything
!
!
!
!
!
!
!
!
control plan
!
!
!
Line con 0
line to 0
line 2
no activation-character
No exec
preferred no transport
transport of entry all
output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
StopBits 1
line vty 0 4
transport input ssh rlogin
!
Scheduler allocate 20000 1000
endA few things to change:
(1) pool of IP must be a single subnet, it is not the same subnet as your subnet internal.
(2) your NAT ACL 1 must be changed to ACL extended for you can configure NAT exemption, so if your pool is reconfigured to be 10.10.10.0/24:
access-list 120 deny ip 172.17.0.0 0.0.255.255 10.10.10.0 0.0.0.255
access-list 120 allow ip 172.17.0.0 0.0.255.255 everything
overload of IP nat inside source list 120 interface GigabitEthernet0/1
No inside source list 1 interface GigabitEthernet0/1 ip nat overload
(3) OUT POLICY need to include VPN traffic:
access-list 121 allow ip 10.10.10.0 0.0.0.255 172.17.0.0 0.0.255.255
type of class-card inspect correspondence vpn-access
game group-access 121
policy-card type check OUT IN-POLICY
vpn-access class
inspect
-
Have problems with the IPSec VPN Client and several target networks
I use an ASA 5520 8.2 (4) running.
My goal is to get a VPN client to access more than one network within the network, for example, I need VPN client IPSec and power establish tcp connections on servers to 192.168.210.x and 10.21.9.x and 10.21.3.x
I think I'm close to having this resolved, but seems to have a routing problem. Which I think is relevant include:
Net1: 192.168.210.0/32
NET2: 10.21.0.0/16
NET2 has several subnets defined VIRTUAL local network:
DeviceManagement (vlan91): 10.21.9.0/32
Servers (vlan31): 10.21.3.0/32
# See the road
Code: C - connected, S - static, RIP, M - mobile - IGRP, R - I, B - BGP
D - EIGRP, OSPF, IA - external EIGRP, O - EX - OSPF inter zone
N1 - type external OSPF NSSA 1, N2 - type external OSPF NSSA 2
E1 - OSPF external type 1, E2 - external OSPF of type 2, E - EGP
i - IS - L1 - IS - IS level 1, L2 - IS - IS IS level 2, AI - IS inter zone
* - candidate by default, U - static route by user, o - ODR
P periodical downloaded static route
Gateway of last resort is x.x.x.x network 0.0.0.0
C 192.168.210.0 255.255.255.0 is directly connected to the inside
C 216.185.85.92 255.255.255.252 is directly connected to the outside of the
C 10.21.9.0 255.255.255.0 is directly connected, DeviceManagement
C 10.21.3.0 255.255.255.0 is directly connected, servers
S * 0.0.0.0 0.0.0.0 [1/0] via x.x.x.x, outdoor
I can communicate freely between all networks from the inside.
interface GigabitEthernet0/0
Description * INTERNAL NETWORK *.
Speed 1000
full duplex
nameif inside
security-level 100
IP 192.168.210.1 255.255.255.0
OSPF hello-interval 2
OSPF dead-interval 7
!
interface Redundant1.31
VLAN 31
nameif servers
security-level 100
IP 10.21.3.1 255.255.255.0
!
interface Redundant1.91
VLAN 91
nameif DeviceManagement
security-level 100
IP 10.21.9.1 255.255.255.0
permit same-security-traffic inter-interface
NO_NAT list of allowed ip extended access all 172.31.255.0 255.255.255.0
IP local pool vpnpool 172.31.255.1 - 172.31.255.254 mask 255.255.255.0
Overall 101 (external) interface
NAT (inside) 0-list of access NO_NAT
NAT (inside) 101 192.168.210.0 255.255.255.0
NAT (servers) 101 10.21.3.0 255.255.255.0
NAT (DeviceManagement) 101 10.21.9.0 255.255.255.0
static (inside, DeviceManagement) 192.168.210.0 192.168.210.0 netmask 255.255.255.0
static (inside, servers) 192.168.210.0 192.168.210.0 netmask 255.255.255.0
static (servers, upside down) 10.21.3.0 10.21.3.0 netmask 255.255.255.0
static (DeviceManagement, upside down) 10.21.9.0 10.21.9.0 netmask 255.255.255.0
access list IN LAN extended permitted tcp 192.168.210.0 255.255.255.0 any
access list IN LAN extended permit udp 192.168.210.0 255.255.255.0 any
LAN-IN scope ip 192.168.210.0 access list allow 255.255.255.0 any
LAN-IN extended access list allow icmp 192.168.210.0 255.255.255.0 any
access list IN LAN extended permitted tcp 10.21.0.0 255.255.0.0 any
access list IN LAN extended permitted udp 10.21.0.0 255.255.0.0 any
LAN-IN scope 10.21.0.0 ip access list allow 255.255.0.0 any
LAN-IN extended access list allow icmp 10.21.0.0 255.255.0.0 any
standard access list permits 192.168.210.0 SPLIT-TUNNEL 255.255.255.0
standard access list permits 10.21.0.0 SPLIT-TUNNEL 255.255.0.0
group-access LAN-IN in the interface inside
internal VPNUSERS group policy
attributes of the VPNUSERS group policy
value of server DNS 216.185.64.6
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value of SPLIT TUNNEL
field default value internal - Network.com
type VPNUSERS tunnel-group remote access
tunnel-group VPNUSERS General attributes
address vpnpool pool
strategy-group-by default VPNUSERS
tunnel-group VPNUSERS ipsec-attributes
pre-shared key *.
When a user establishes a VPN connection, their local routing tables have routes through the tunnel to the 10.21.0.0/16 and the 192.168.210.0/32.
They are only able to communicate with the network 192.168.210.0/32, however.
I tried to add the following, but it does not help:
router ospf 1000
router ID - 192.168.210.1
Network 10.21.0.0 255.255.0.0 area 1
network 192.168.210.0 255.255.255.252 area 0
area 1
Can anyone help me please with this problem? There could be a bunch of superfluous things here, and if you could show me, too, I'd be very happy. If you need more information on the config, I'll be happy to provide.
Hello Kenneth,
Based on the appliance's routing table, I can see the following
C 10.21.9.0 255.255.255.0 is directly connected, DeviceManagement
C 10.21.3.0 255.255.255.0 is directly connected, servers
C 192.168.210.0 255.255.255.0 is directly connected to the inside
And you try to connect to the 3 of them.
Politics of Split tunnel is very good, the VPN configuration is fine
The problem is here
NO_NAT list of allowed ip extended access all 172.31.255.0 255.255.255.0
NAT (inside) 0-list of access NO_NAT
Dude, you point to just inside interface and 2 other subnets are on the device management interface and the interface of servers... That is the question
Now how to solve
NO_NAT ip 192.168.210.0 access list allow 255.255.255.0 172.31.255.0 255.255.255.0
no access list NO_NAT extended permits all ip 172.31.255.0 255.255.255.0
NO_NAT_SERVERS ip 10.21.3.0 access list allow 255.255.255.0 172.31.255.0 255.255.255.0
NAT (SERVERS) 0 ACCESS-LIST NO_NAT_SERVERS
Permit access-list no.-NAT_DEVICEMANAGMENT ip 10.21.9.0 255.255.255.0 172.31.255.0 255.255.255.0
NAT (deviceManagment) 0-no.-NAT_DEVICEMANAGMENT access list
Any other questions... Sure... Be sure to note all my answers.
Julio
-
problem with the easy line of site Web
I have a problem with a site called easy line. It's using words on my ebay page to link to advertisements.
No idea how I can get rid of him?
Do a check with some malware malware, analysis of programs on the Windows computer.
You need to scan with all programs, because each program detects a different malicious program.
Make sure that you update each program to get the latest version of their databases before scanning.- http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
- http://www.superantispyware.com/ - SuperAntispyware
- http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
- http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
- http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
Alternatively, you can write a check for an infection rootkit TDSSKiller.
See also:
- "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
-
Hello
I was all of a sudden having problems connecting to my wifi at home. When I was diagnosed, he says cannot communicate with primary dns server. I tried all methods in similar positions, but nothing works. I am also unable to connect to internet with my iphone and the itouch. It's really frustrating, because I've already tried all of your suggestions. I just ran another ' diagnose connection problems and it says the following:"There could be a problem with one or more network adapters on this computer." Help, please!Thank you!Thanks for your help, but I have tried this before. In the end I just unplugged my modem and plugged in again and it worked? I feel a bit silly not to try first.
-
Problem with the 1.7 Server Update utility?
Hello
A colleague tries to run the 1.7 SUU on a Dell 2950 ESX version 3.5 running, the utility seems to work beyond the point showing "System is consistent with the preconditions", but then just exits and returns the word "Null".
Someone at - he observed this behavious and might perhaps suggest a work around?
Thanks for reading,
Adam
Message edited by AdamTRH on 06/24/2008 07:50
-
problems with the IPCC monitoring server port
I have 4.0 (4) IPCC Express Premium with Call Manager 4.1 (2). I have a server with two NIC a 'normal' IPCC and other oversight bodies. I have configured the port monitoring with a few other IP (172.16.255.10/24) and I set up RSPAN on switches. I see a call between officers and the appellants.
But, after a reboot of the server, I get the error that my server will stop after a minute. I cann't see ane packages from monitor port. When I disable the port monitor and restart the server everything is OK and then I can activate the monitor port and everything is OK.
I have nothing in the registry settings.
What should do?
Thank you
I had the same problem as you and this has solved my problem.
-
problem with the ios certificate server does not update the CRL
Hi all
The background is that I'm putting a DMVPN solution with tunnels ipsec between the rays created by using certificates.
I use a cisco 877 as the CA server (its 12.4 (6) T5) running to provide certificates for the spoke routers. This part works very well - rays can apply for a certificate and get a number very well.
The problem is CA, life of LCR is set to 24 hours, but the CA is not updated the LCR so when the rays see CRL (as defined in their trustpoint) they point to a mistake that the CRL is obsolete and does not connect.
If making a ' #sh cryptographic pki server ' it lists a ' CRL NextUpdate timer. It has a timestamp that is 24 hours after the last certificate was revocked. The only way I can get the LCR to be rebuilt must revoke a certificate.
So, my question is, am I missing something here? I thought that it would automatically generations a new CRL list file every 24 hours.
Can anyone help?
Thank you.
Hey Marc (?)
This seems to correspond to this bug:
CSCsy95838 AC IOS: LCR of the not updated, update timer not started
However, it does not mention if 12.4 (6) T5 is affected, only that it was found 12.4 (15) T3 and resolved to 12.4 (15) T10 and other more recent versions.
I suggest trying the last 12.4 (15) Tx, 15.0 (1) Mx or 15.1 (4) Mx version if you can.
I assumed that you have much of it, but just in case: as a workaround, you can disable CRL checking on all routers DMVPN, of course they will still allow connections from routers with a revoked RADIUS.
As (temporary?) substitute for a Revocation list, you can use a 'certificate ACL' with which you can create kind of a 'local CRL Manual:
crypto pki certificate map certACL 10 serial-number ne serial-number ne etc.
crypto pki trustpoint myTP
match certificate certACL
(note the "ne" stands for "not equal" so you are permitting any certificate whose serial number is not listed)Of course, you would have to configure (and maintain!) participating on each router in the DMVPN so it's heavy, but I guess if you revoke often certs, that it might be an option.HTHHerbert--
If this post answered your question, please click the button of "right answer".
-
FTP problems with the linux ftp server
Hello
I have a problem when trying to get a file via FTP. The FTP server is an embedded linux system, get the file manually via FTP is no problem, but to TestStand, I get the following error:
Cannot download the file ' / opt/log/sislog.log'.
Check if the local and remote path exists and is read and write respectively.The system does not have the specified path.
error. I know that the file is there, the permissions are given. So I tried the other way around and tried to download a file called "mysislog.log" in that directory and download it again. I get the same error, but when I telnet to the LUX machine, I see that there is a file in this directory, but the file is called "\mysislog.log" - so I think backslash TestStand put the last bar in the name of the file and therefore impossible to load the file.
Here is the list of the repertoire of the LUX machine:
root@FCM2001-A2-03-37-4A: / mnt/exponent0/opt/log > he's
-rw - r - 1 root root 0 16 Apr 08:51 \mysislog.log
-rw - r - r - 1 root root 111219 16 Apr 08:41 syslog_0.log
-rw - r - r - 1 root root 262096 Apr 13 11:52 syslog_1.log
-rw - r - r - 1 root root 35503 Apr 13 11:53 syslog_error_0.logAny ideas?
Hello
Unfortunately, this is a known issue that will be fixed in a future version of TestStand (although I don't know what future version). The FTP step was designed for LabVIEW RT.
The workaround is to call a code module that runs this ftp upload, possibly using a ftp software.
See you soon,.
Cheggers
-
Problem with the microsoft SQL server installation 2016
When I'm tryig to install MICROSOFT SQL SERVER MANAGEMENT STUDIO 2016 his watch an error like
[8:21 TO 8 19(D)] [2015 12-14 T 13: 46:06] e000: MainViewModel.OnBundleAction: Bundle action failed
What to do to solve this problem. ?
Hello
Your question is beyond the scope of this community.
Please repost your question in the SQL Server TechNet Forums.
https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer
See you soon.
-
Problem with the easy search engine url
I want that search engines to scan some of my pages that can currently will be achieved only with variables in the url, for example www.mydomain.com/home.cfm?m=fred. So I changed that link to the www.mydomain.com/home.cfm/fred (call this "google-friendly url"). On home.cfm, I check the value of cgi. PATH_INFO, and if it is not null, I analyze the characters after the last slash to get the value of my variable "m" (in this case, "fred").
The strange thing is that when I navigate the explorable url by google, my stylesheet is ignored and none of my styles are applied. When I use Firebug to look at the html code and css, I see this when inspecting any < div > tag:
: root {ua.css (line 45)
«"" "quotes: '" ' "" "" "" "" "";} "»
My global.css file is in the same folder (wwwroot) as home.cfm. Can someone tell me what is happening? Thank you.
PeteWild eyed guess here, but you may need to use full url paths for your
stylesheets and java scripts with this diet.The idea being that, as long as you reference currently a relative path.
He is attempting to add this path to the URL, as the browser sees and
find the resouceIn other words, the browser is looking for
www.mydomain.com/Home.cfm/Fred/global.CSS and the server said he
There is no file of this type. -
Problem with the Easy Cap Driver video capture device
I have an EasyCap USB 2.0 video adapter and that you have installed the software, but the video driver does not load. When I look at the Device Manager devices I see the audio drivers are installed but the video driver has the following message "the drivers for this device are not installed. (Code 28) ». I tried to find updated drivers on the web without success. Someone at - it suggestions?
Hello
What Ulead Video Studio version do you use?
Microsoft Compatibility Center has no information on the compatibility of Ulead Video Studio.
http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=Windows%208.1&Locale=en-us&Architecture=X64&TextSearch=Ulead%2BVideo%2BStudio&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14I suggest you to install Ulead Video Studio in compatibility and see if that helps.
Make the programs more compatible with this version of Windows
http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-WindowsPost us the results after trying the steps above.
Maybe you are looking for
-
HP Pavilion g6-1b39wm: upgrade the processors HP Pavilion g6-1b39wm
Sorry if this question has been asked over and over. Just could not get a clear answer from HP. I have a g6-1b39wm with processor AMD E350 Pavilion. Seems to be a specialized processor designed for laptops. Low watt, unusual design. I want to put
-
generate a double exponential wave
Nice day How can I generate double exponential wave through labview? Best regards Ahmad Tarmimi
-
8 cost of Windows Installer on hp envy x 2
HelloI recently Bough the HP Envy x 2 (11-g000ew), as well as the Windows 8 Pro 32 bit on DVD.The laptop works very well, I've updated to the latest BIOS (F.12) and wanted to do a new installation of Windows.I created a boot USB from the DVD drive, i
-
Type mismatch runtime error 800a00d MSVBScript
Title: MSVBScript original error Error: Type mismatch 800a00d to TIME MSVBScript error 'Open Conn' / includes/content_left to 11 asp.line Please respond to the * address email is removed from the privacy * I can not enter or find my main email accoun
-
emails are sent from my computer adverstising ' *' Associates RX.
I have run virus scans scheduled AND just run a sweep of micro-soft. All scans show repairs and/or viruses. How can I stop this. ? should I close my msn account?