Out of black screen on my Equium A100 - 01 M

Similar Questions

• Black screen suddenly on Equium A210-17i

  The screen on my Equium A210-17i will sometimes just completely black, although always backlit. This happens usually when the computer is left on during a fairly long period of time (tonight after 3 hours) when using it.

  When it happened tonight I just internet browsing. It's happened several times, and the only way to recover whatever it is is to turn off the computer with the power button. My friend who also has the same laptop also has the same problem, and although it occurs about once a week, it's always boring. All solutions?

  It s certainly nothing wrong with you material
  I read that this problem could be related to Windows Vista bugs too

  Then all first of all you need to update the Vista for the last State.
  Then check the driver for graphics card for updates and * then you must update the BIOS if a newer version * is available

  Greetings mate

• Black screen on the Satellite A100-712, after Bios Update

  I bought a new Satellite A100-712 and I did a bios upgrade, everything was fine in windows and restart the laptop got it is pasted on the toshiba black screen that appears when you turn on the lapto.

  Any suggestions please, I would be very grateful

  It doesn't sound good. I did the BIOS update on two laptops A100 and everything was OK. Sorry, but I think that you will not be able to do anything alone. I recommend you contact the service authorized in your country as soon as possible.

• Black screen on my Satellite A100

  I have a problem with my computer:

  The computer can put in mode, but it cannot run the operating system, the TFT screen is black. I can't start my computer.

  What can I do?
  Someone knows something about it?

  Thank you

  Hello

  What is the HARD disk activity? Can you please write more than one sentence?

  See Toshiba welcome screen?

• Canon G12_I cannot take a picture. Purple lines fade in and out, then black screen.

  Uploaded a few photos off the G12 and then charged the battery and when I reinstalled the battery I could see pictures, but when I switch them to camera mode I have brief purple lines then black. And I'm not able to take pictures. Help!

  Uh oh, sounds like the processor or sensor could have retired. I have to assume that you can not access the menu to do a complete reset of the system, so I remove the battery and try to keep about an hour. With the battery, press the power button and hold for about 10 seconds. Then, reinstall the battery and see if it does the same thing. If so, you may need to contact Canon on a repair, but that could be very expensive. It could have been a static load that occurred when you changed the battery, otherwise the processor or the sensor has reached the end of the line.

  I feel your anxiety that I have a PowerShot G12 and this is my favorite camera. It is used there, and some refurbished, to replace it. I hope you can get it running again.

  Steve M.

• Compatibility screen through Equium A100 series

  Hi all

  I have a Toshiba Equium A100 027, the screen which has developed a few lines. It has never bothered me much, but the opportunity has presented itself to replace. I came across a screen shot an Equium A100 * 147 * for sale and was wondering if it will work in my machine.

  Resolution and size are the same, the only difference I see is that the screen of the 147 is variety "TruBrite.

  Can someone tell me if it works in my model 027?

  Thank you
  Calps

  Hello

  I think you can use Equium A100 147 display on the satellite A100-027
  The size and connectors should be the same

• Equium A100 how to remove BIOS password?

  Hi all

  Following a previous thread on failure of screen on my Equium A100,
  Any member does know how to remove the BIOS password on this computer.

  My problems with the black screen syndrome seem to start at the time asked me to put a BIOS password. I managed to get some information indicating "press ESC and start together and then press F1 '-it seemed to work once, but then I couldn't repeat the sequence, the computer just started directly in windows.

  Any ideas on how to remove the BIOS password. (I don't know the password!)

  Hello

  The BIOS password can be removed ONLY by a certified maintainer Toshiba in your country.
  It's the type of security that can be removed simply by authorized technician

  Therefore, get in touch with the local ASP to get rid of this password.

• Equium A100 - 027 Vista: the screen goes black for just 1 second

  I was wondering if anyone here can tell me what is the problem with my laptop. That's all new Toshiba Equium A100-027. Quite often, my screen will turn black for just a second, and then it will return to normal again.

  I changed my power settings, so it is not because of the screen laptop will. Most of the time, it's going to happen when I run the program in full-screen on real player, but it happens when I play mahjong titans which is included in microsoft vista.

  HM, just a small suggestion to check if you have a hardware related problem or some software:

  Connect your laptop to an external monitor and see if the problem still occurs.
  If the problem occurs with an external monitor then check that you have installed the software and try uninstalling the last installed software, perhaps the best will be step by step.

  So if all else fails, then try a recovery.

  Welcome them

• Equium A100-306: screen black TV

  Hello I was wondering if someone could help me, I have a laptop Equium A100 306 and I want to plug into my tv to watch movies that are stored on it.

  It has a SVHS socket on the side and I bought a svhs cable SCART for her and when I connect it to my TV the picture is black and white. Does anyone know how to remedy this? Any help would be greatly appreciated.

  Thank you.

  Have you tested with different channels? I have my reserved channels connect TV SCART. Also check the settings on the television. Maybe you have an option to get the color.

• Black screen on Equium P200D blocking

  I bought an Equium P200D about two weeks ago and it keep "black screening" on me. Without warning, it would be empty screen, no mouse, the keyboard is unresponsive, caps lock, shift etc. is more changed their lights. Click briefly on the power switch, it wasn't in mode 'sleep'. The only solution I found was to hold down the power button, then restart.

  I myself am sick of this problem so I reinstalled Vista. After the long list of SP1 updates and an update of the video driver, it stays black screened. So I tried upgrading the BIOS. So far so good. No more black screens. Two days running this laptop is not black projected onto me.

  Note there is another black screen blocking out there - but it is not the same. In the other, you get a mouse and can use CTRL-ALT-DELETE to get a task manager and run explorer.exe to recover. This black screen, I found usually happened after the system went to bed or while you are using.

  Pete

  Thanks for this message from Pete.
  I noticed the empty screen after wake up form hibernation on Vista laptop too.
  As you update the BIOS solve this problem successfully.

  This thread might be useful for other users who noticed the very strange behavior.

  Ciao

• Satellite A100-906 - black screen with a cursor

  Hi all

  There is a problem with my Satellite A100-906:

  After having lit - Toshiba page appears - that the loading Windows XP page - more than a black screen with a cursor (the touchpad moveable)... and nothing more.

  That's what I tried without success:

  Detach the battery for over an hour
  Start the computer with battery detached
  Change the default BIOS settings
  Start in Safe Mode - the same black screen with 'safe mode' legends in the 4 corners of the screen.

  Please help with this.

  Hello

  According to your message, the screen of the laptop BIOS is visible and also the Windows screen.
  I think that it s not a hardware problem but a software problem.
  Maybe your operating system is confusing until you think about using the Toshiba Recovery disk and to restore the system?
  I mean you already tried the passage without danger and she didn't so in my opinion, the next step should be the new installation of the OS
  Check it out!

• Satellite A100 system goes to a black screen after the recovery procedure

  I tried running the recovery CD, I received on my cell phone. the process perfectly, (I have only one CD, I don't know if I need a second). At the end of the process, I have the option to insert the second CD, or jump.
  Because I don't have that one CD I have support on ignore.

  I tells me that the installation is complete and I can restart my system.
  Then I removed the disk and I tried to reboot the system. The system goes to a black screen (on which he indicates that Microsoft load) and then crashes. That was the problem I was facing before recovery.

  Basically, the recovery process has not worked. I don't think I did something very wrong, unless I need a second CD. What could be the problem?

  Help me please!

  Hello

  The A100 is one of the new series of laptops and AFAIK the image of Toshiba was placed only on a CD (DVD) recovery.
  I think that the message and the possibility to insert the second CDconfuses a little.

  In my opinion the black screen and freeze has nothing to do with the recovery procedure and the new installation if Windows OS.
  Due to the fact that this problem has occurred until you have installed the OS from the recovery CD, I assume that there must be something wrong with the hardware.

  But it s very interesting to know if the same problem appears after the new installation of Windows from the original CD of Microsoft.

  It's worth a try.

• Equium L40-10 x black screen

  OK, I'm at my wits end with this one

  Equium L40 - 10 x screen went dark. Can know roughly if brandi for screen light. Works fine when connected to the external display.

  Replaced the power inverter - still black screen
  Replaced screen - screen still black
  Replaced the screen cable - still black screen

  Only other thing I can think is too that the replacement inverter was defective?

  What else could be?

  > Can know about if brandi for screen light. Works fine when connected to the external display.

  He is a singing typical of FL inverter problem
  The FL inverter is part hidden behind plastic frame and control the hand lit display.
  I guess it must be replaced

  New part can be bought from authorized maintainer Toshiba
  Get in touch with the guys in your country and ask to fix.

• Satellite A100-033 - black screen with no data after the advanced boot option

  I tried each F8 option in the advanced boot options to get my work laptop. There is just a black slowed after repairing Windows files and Loaded. Also F2 & F12 even when I try to use the recovery disk it remans black?
  Safe mode: nothing is displayed on the screen at all

  I noticed my mouse cursor can be seen moving around the screen, but the rest of the area is black.

  OS Windows Basic 32 bit IE9 Satellite A100-033

  Hey,.

  So if you start from the Toshiba Recovery disk you also get a black screen?

  What happens if you start from a normal Microsoft Windows disk? Just to make sure that it of hardware related problem or not

• Screens on the Satellite / Equium A100 series

  I was wondering if someone could help me because I am looking to buy the Satellite Pro A100 - Intel® Celeron® M 380 processor, however I will buy the notebook on the interent and I was wondering if the screen described as "WXGA TFT display" is the same as a laptop computer that I saw in a store and the screen on this one is described as «Screen Toshiba TruBrite WXGA TFT» I'm going to begrateful for all the advice on this topic

  Thank you very much

  Hello

  As far as I know the Satellite Pro A100 comes with two screens:
  large display 15.4 TFT color display "(1280 x 800)
  large display CSVI 15.4 TFT color display "(1280 x 800)

  For example the satellite A100-602 uses a wide display 15.4 TFT color screen "(1280 x 800)."
  But uses Equium A100-195 15.4 "(1280 x 800) wide angle of view CSVI TFT color display."

  Well, in general the two units should use the same poster.