Problems with the HP scanning software

Similar Questions

• SJ G4010 communicates only with the HP scanning software

  Now, I have the same problem as others.  I am running win xp pro.

  I have uninstalled/reinstalled the software (HP Solution Center) because I wasn't able to scan from Corel Presentations, I could do with my old HP scanning 4470c SJ.

  Now, when I try to open HP Solution Center's, I get the following message:

  "No HP devices have been detected.  HP Solutions Center's will be closed

  When I try to acquire an image from the scanner when I'm in HP PhotoSmart first or in Corel presentation I get this message:

  "Unable to communicate with HP scanning software. Please check that it has been installed and working properly.  If the problem persists please closed your application and try again. »

  Of course, it does not solve the problem.

  After this error message I get an additional error in HP PhotoSmart first stating:

  'Invalid Twain State'.

  It is interesting I can scan from in MS Paint and also MS multimedia library of MS Office 2007, which means that the scanner works.  I can also use the scanner with MS scanner and Camera Wizard.  The problem seems to be in the inability of the HP software to detect the scanner.

  Any ideas?

  OS - win xp pro sp3

  This blog has solved my problem of communication between the HP and my G4010 scanner solution Center:

  http://hpanswers.blogspot.com/2007/12/no-HP-devices-detected-HP-solution.html

  The solution is to download the latest software on the HP ftp site and rub all the residual Scanner HP program remains on your hard drive or your registry before attempting to reinstall.

  Still can not sweep of Corel Presentations as I used to with my old SJ deceased 4470c but it's just a minor irritant compared to what I went through to fix this.

• problems with the system scans

  I wanted to back up my entire computer. Before that, I wanted to make sure that everything was perfect, then I ran sfc scan and there are corrupted files that have been repaired, but there is no repair for later scans keep the same report.  So I ran chkdsk with scan for and attempt recovery of defective and that just hung areas to where I had to make a hard stop.  So, I did a complete diagnosis of my hard drive and those of all the passes.  I decided to do a complete reinstall of windows and found that these same analyse the mistakes of follow-up. So before decide me the diagnostics that my computer manufacturer are somehow blotched.  I need to know how to solve this problem, if I can do a full backup.  I don't have a lot of time because my warranty ends at the end of this year.

  I wanted to back up my entire computer. Before that, I wanted to make sure that everything was perfect, then I ran sfc scan and there are corrupted files that have been repaired, but there is no repair for later scans keep the same report.  So I ran chkdsk with scan for and attempt recovery of defective and that just hung areas to where I had to make a hard stop.  So, I did a complete diagnosis of my hard drive and those of all the passes.  I decided to do a complete reinstall of windows and found that these same analyse the mistakes of follow-up. So before decide me the diagnostics that my computer manufacturer are somehow blotched.  I need to know how to solve this problem, if I can do a full backup.  I don't have a lot of time because my warranty ends at the end of this year.

  If you have a warranty, I doubt that you are using Vista.

  Vista has not been sold for many years and these are Vista Forums you are in.

  It's the informtion for Vista backup:

  If you want to make a complete PC Backup or a backup file only, buy an external hard drive.

  Only Vista professional, comprehensive and company have the opportunity to make complete backups of PC.

  All editions of Vista can do backups of files.

  Here's how to back up and restore your files:

  "How to back up your data.

  http://www.wintuts.com/how-to-backup-your-data

  http://www.home-PC-help.com/windowsvistabackup.html

  "How to restore your files.

  http://www.wintuts.com/how-to-restore-files

  This is how to do a full backup of the computer and how to restore it (for Vista Business, Ultimate and Enterprise only):

  «How to make a backup of the computer in Vista»

  http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/

  "How to restore a full backup of the computer.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

  FAQ from Microsoft about backup and restore:

  "Back up and restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are a number of 3rd party programs available for a full backup of the computer; others, you must pay for, some are free.

  This program must be purchased:

  "Acronis True Image".

  http://www.Acronis.com/homecomputing/products/TrueImage/index_gwo.html?utm_expid=4274314-6

  These are free programs for the protection of the computer:

  "EaseUS Todo Backup free"

  http://www.TODO-backup.com/products/home/free-backup-software.htm

  "Download Backup & Recovery 2012 free FREE!

  http://www.Paragon-Software.com/home/BR-free/download.html

  «Macrium Reflect FREE Edition»

  http://www.Macrium.com/reflectfree.aspx

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If SFC detects serious flaws, you may need to perform a repair upgrade Installation.

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• Problem with the e-mail software

  Hi, I just bought a new computer with windows 8 on it. The e-mail program installed (do not know exactly what!) seems very basic and does not have any provision to create folders to save, or mail sorting. Is it me or I need to install a different e-mail Manager. Ive mucked all day trying to solve this problem but I am about to give up. I tried to download windows essentials, but used to work either, can not even install! First thoughts is regretting the purchase and to stay with XP, but now that I have? Can anyone help please? Dave.
  
  Original title: E-mail

  The Mail App is very basic, and there is no POP3 accounts. As you should do if you have Win7, download an e-mail client.
   
  Top 11 programs free email for Windows
  http://email.about.com/od/windowsemailclients/TP/free_email_prog.htm
   
   

• It seems that everyone is having the same problem with the Creative Cloud software. I have a plan of photography and things were going smoothly until I received notification this morning of Adobe CC that I can't update my products and I need to check my I

  someone knows what to do

  You can try clicking the 'continue' and check if it works.

  You can also make reference is not clear "we have trouble, check your membership error message."

  In case it does not work, you can press to

  http://Adobe.LY/yxj0t6

  Concerning

  Baudier

• I have a problem with the background update

  I pushed on Adobe Acrobat Reader DC via MSI for all my workstations that are Windows 7 machines.  The installation went without any problems, but I didn't know that the program updates automatically and it is in the diary of the events of these errors.  Product: Adobe Acrobat Reader DC - update '{AC76BA86-7AD7-0000-2550-AC0F084E7200}' could not be installed. Error code 1625. Windows Installer can create logs to help solve the problems with the installation of software packages.  Is there a way I can either A) disable these automatic updates or B) force these updates to cross even without administrator privileges?

  Hi orangejake1990,

  Disable you updates in Acrobat Reader ms, please refer to this link Windows updates.

  Otherwise, you can manually download the updates Adobe - Adobe Reader: for Windows & push.

  Kind regards

  Nicos

• HPPIW. EXE does not solve the problem with the installation of the complete software for 8500 A909g

  Waterboy71 - sorry for a new position, but the forum is read-only (?) so I can't respond to your response to my problem with the installation of the driver/software 8500 A909g.  By your answer on 5/19, I downloaded HPPIW. EXE and it ran.  It detects my wireless printer, but it tells me that "the selected printer is not supported by this wizard."  Is there another thing I can do to install the software so that I can scan and fax from my Windows laptop 8.1?

  Hello
  If please try following the steps below and check if this can solve the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Software for printing device Kodak esp7250 does not load as areas appear gray and Kodak said that it is a problem with the operating system 7

  I have problems trying to reinstall my printer software Kodak esp 7250.  The area where you register the software is empty and the Browse button to choose a place is gray, so it will not go any further because if you then choose then says invalid path.  Of course, it's an invalid path because it will not choose an or allow me to choose one.  I contacted Kodak and after working with it for a while, they said it's a problem with the operating system.  I have Windows 7 on a laptop Gateway.  I need my printer and get very frustrated because nobody seems to know how to solve this problem.  I was able to use it when I got to the laptop, but suddenly one day it wouldn't work.  Help, please.

  Hello

  Thank you for your response.

  Make the SFC scan and check the status of the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I would also advise you to check the status of the issue in a new user account.

  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If it works in a new user account, then you will need to fix the corrupted user profile. You can visit this link for the steps:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps!

• Problems with the software of fax on 1536dnf

  Hi, I just got a 1536dnf all-in-one, and I have a problem with the software sending faxes. I can fax machine directly, but when I try to send a fax from my computer, I can't even get into the software. I get an "internal error" that there is no device detected. I installed it on my network, so about four different computers can access. I'm running Windows XP SP3 and any other function works fine (I can print to the printer from each computer, send and receive faxes from the printer itself, etc.).  Any ideas why this happens? I found zero documentation or help on this and any help would be appreciated.

  Thank you.   I was using FAX4Word plugin for Word.  It allows to easily print/fusion of fax machines.

  I answered my own question, but others may be interested in:

  I was buy HP printers since the time that first, they came out with the LASERJet House, I waited in line to get one at the then price of $700 or more.  I bought a HP product on average every 3 years after that.   All HP products were excellent quality and easy to use.

  Once I looked at the question of the use of the 1536dnf as a modem, I found that I was MUCH better off just buying a modem from "Zoom" $ 50 for my database driven fax needs rather than trying to send it through the HP.  If it is possible to use the 1536dnf as an intuitely MODEM, it is a solution too complex to simply get a modem to 'Zoom in' $50, which leaves my 1536dnf available for other tasks.

• HP pavilion n242se 15: problem with the BIOS software

  Hello
  I have HP pavilion 15-n242se and I have the problem with the software of the BIOS, because when I restart the computer it turns off completely and go back a few seconds later.
  Please, I want to again software for BIOS for Windows 10 64 bit
  
  Can you help me?

  SyrianCow

  Sorry for the bad news, but HP does not update the BIOS of your PC for Windows-10.

  They planned them to Win8.1, and you should have to do the upgrades at the time, BEFORE you upgraded to Win10.

  The HP BIOS upgrades are OS-specific version, so now that you have upgraded, you can no longer run these.

• has had an alert that there is a problem with the installation of IntelliPoint software

  I got an alert that there is a problem with the installation of the IntelliPoint software. To resolve this problem, you must remove IntelliPoint software, and then run Intellipoint Setup again.  If I have remove it where do I go to run the installer?

  Hello

  You can go here: http://www.microsoft.com/hardware/en-us/downloads

  then select the keyboard and mouse or other device you can download the latest version of the Intellipoint software.

  Thank you...

  The thread is placed automatically in Windows.

• I get the message: Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Photoshop has been giving me the warning:

  Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Also other programs are affected.  I suspect a recent download of Adobe.  Can anyone HELP.

  No, it has nothing to do with updates of Adobe. There is a problem with your video card driver.

  Go directly to the Web site of the manufacturer of the GPU for updates (not Microsoft, not a System Builder).

• Hello, I have problems with the digital signature on the software. It displays the error message: 2148073510. Could someone help me?

  Hello, I have problems with the digital signature on the software. It displays the error message: 2148073510. Could someone help me?

  Hello

  I would ask you go through the next thread once and see if that fixes the problem.

  Error 2148073513 when you try to digitally sign Acrobat 11 standard

  Concerning

  Sukrit diallo

• Hello good I would like to cancel the annual plan of adobe audition, because I had problems with the software and the Bank, if I can help with this please.

  Hello good I would like to cancel the annual plan of adobe audition,

  As I have had problems with the software and the Bank, if I can help with that please.

  Please contact customer support for cancellation & refund of the next purchase. Contact the customer service

  Creative single-app cloud membership for Adobe Audition (one year)

  Subscription Office

  March 11, 2015

  In the case of any questions, please let us know, I can certainly go for you.

  Concerning

  Baudier

• Problem with the software Modem on Satellite Pro L40

  I tried to set up a connection Dial-Up Networking on a Satellite Pro L40 running Vista and can't get the modem to talk to the modem from the ISP. The connection appears OK and then you can hear the modem dial, but when the ISP picks up there is a bit of yelling and then my modem abandons the connection and I get the standard vista connection failed box.

  Things I've tried:
  -latest drivers for the 2.1.77.0 modem (and the rest of the system) downloaded from Toshiba and installed OK
  -all the updates of windows installed
  -removal of the modem in the Manager of peripherals and re - install
  -suppression of the agrsmdel.exe and then re-install
  -try different cables to plug into the phone jack
  -several different ISPS and phone numbers
  -reduce the maximum speed of the connection
  -connection to the same ISP with my Satellite L10; works very well never have time!
  -using the windows to diagnose and repair the tool (set last resort!); says that the modem works fine and can not find a problem with the connection

  Is it possible that the update of the BIOS on the laptop would make a difference (currently v 1.60)? I did some research on Google and found messages on various forums, which suggests that the connection between the motherboard and the modem chip is a little doubtful for all the Agere Soft Modem; If the case is it something I can fix myself or I should go for warranty repair?

  Midders

  Hello

  I'm sure that there is no problem with your modem, but with the configuration or even s ISP modem. I recommend you to speak with the support of the ISP.