Problems with the IP settings on XP pc wireless network

Similar Questions

• Problems with the album settings.

  I'm having a problem with the settings of my album. When I "crop" an image to select a background image, I had accidentally selected always use and now I can't change it. Is there a way of?

  In this case, try the settings-applications-all, press 3 dots (settings) and reset the application preferences.

• Problems with the display settings in Windows XP on my acer aspire netbook

  Lack of custody of my office and the bottom was always blue. When for example I opened the menu options for DIVX it's all close together and the window is way to big for the screen I can't see all of the screen. Also problems with the connection to my netbook to the TV. It should never be on the screen and I can't understand how difficulty. Any suggestions

  Hi CharlesHefty,

  1. do you get an error message or error code?

  Check the event viewer for the newspapers of the related events that could help us solve the problems:

  Procedure to view and manage event logs in Event Viewer in Windows XP

  I suggest you try the steps from the following links in the article and see if it helps:

  How to solve problems of hardware and software drivers Windows XP

  How to configure and use multiple monitors in Windows XP

  Overview of multiple monitors

  I hope this helps.

• Have problems with the IPSec VPN Client and several target networks

  I use an ASA 5520 8.2 (4) running.

  My goal is to get a VPN client to access more than one network within the network, for example, I need VPN client IPSec and power establish tcp connections on servers to 192.168.210.x and 10.21.9.x and 10.21.3.x

  I think I'm close to having this resolved, but seems to have a routing problem. Which I think is relevant include:

  Net1: 192.168.210.0/32

  NET2: 10.21.0.0/16

  NET2 has several subnets defined VIRTUAL local network:

  DeviceManagement (vlan91): 10.21.9.0/32

  Servers (vlan31): 10.21.3.0/32

  # See the road

  Code: C - connected, S - static, RIP, M - mobile - IGRP, R - I, B - BGP

  D - EIGRP, OSPF, IA - external EIGRP, O - EX - OSPF inter zone

  N1 - type external OSPF NSSA 1, N2 - type external OSPF NSSA 2

  E1 - OSPF external type 1, E2 - external OSPF of type 2, E - EGP

  i - IS - L1 - IS - IS level 1, L2 - IS - IS IS level 2, AI - IS inter zone

  * - candidate by default, U - static route by user, o - ODR

  P periodical downloaded static route

  Gateway of last resort is x.x.x.x network 0.0.0.0

  C 192.168.210.0 255.255.255.0 is directly connected to the inside

  C 216.185.85.92 255.255.255.252 is directly connected to the outside of the

  C 10.21.9.0 255.255.255.0 is directly connected, DeviceManagement

  C 10.21.3.0 255.255.255.0 is directly connected, servers

  S * 0.0.0.0 0.0.0.0 [1/0] via x.x.x.x, outdoor

  I can communicate freely between all networks from the inside.

  interface GigabitEthernet0/0

  Description * INTERNAL NETWORK *.

  Speed 1000

  full duplex

  nameif inside

  security-level 100

  IP 192.168.210.1 255.255.255.0

  OSPF hello-interval 2

  OSPF dead-interval 7

  !

  interface Redundant1.31

  VLAN 31

  nameif servers

  security-level 100

  IP 10.21.3.1 255.255.255.0

  !

  interface Redundant1.91

  VLAN 91

  nameif DeviceManagement

  security-level 100

  IP 10.21.9.1 255.255.255.0

  permit same-security-traffic inter-interface

  NO_NAT list of allowed ip extended access all 172.31.255.0 255.255.255.0

  IP local pool vpnpool 172.31.255.1 - 172.31.255.254 mask 255.255.255.0

  Overall 101 (external) interface

  NAT (inside) 0-list of access NO_NAT

  NAT (inside) 101 192.168.210.0 255.255.255.0

  NAT (servers) 101 10.21.3.0 255.255.255.0

  NAT (DeviceManagement) 101 10.21.9.0 255.255.255.0

  static (inside, DeviceManagement) 192.168.210.0 192.168.210.0 netmask 255.255.255.0

  static (inside, servers) 192.168.210.0 192.168.210.0 netmask 255.255.255.0

  static (servers, upside down) 10.21.3.0 10.21.3.0 netmask 255.255.255.0

  static (DeviceManagement, upside down) 10.21.9.0 10.21.9.0 netmask 255.255.255.0

  access list IN LAN extended permitted tcp 192.168.210.0 255.255.255.0 any

  access list IN LAN extended permit udp 192.168.210.0 255.255.255.0 any

  LAN-IN scope ip 192.168.210.0 access list allow 255.255.255.0 any

  LAN-IN extended access list allow icmp 192.168.210.0 255.255.255.0 any

  access list IN LAN extended permitted tcp 10.21.0.0 255.255.0.0 any

  access list IN LAN extended permitted udp 10.21.0.0 255.255.0.0 any

  LAN-IN scope 10.21.0.0 ip access list allow 255.255.0.0 any

  LAN-IN extended access list allow icmp 10.21.0.0 255.255.0.0 any

  standard access list permits 192.168.210.0 SPLIT-TUNNEL 255.255.255.0

  standard access list permits 10.21.0.0 SPLIT-TUNNEL 255.255.0.0

  group-access LAN-IN in the interface inside

  internal VPNUSERS group policy

  attributes of the VPNUSERS group policy

  value of server DNS 216.185.64.6

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value of SPLIT TUNNEL

  field default value internal - Network.com

  type VPNUSERS tunnel-group remote access

  tunnel-group VPNUSERS General attributes

  address vpnpool pool

  strategy-group-by default VPNUSERS

  tunnel-group VPNUSERS ipsec-attributes

  pre-shared key *.

  When a user establishes a VPN connection, their local routing tables have routes through the tunnel to the 10.21.0.0/16 and the 192.168.210.0/32.

  They are only able to communicate with the network 192.168.210.0/32, however.

  I tried to add the following, but it does not help:

  router ospf 1000

  router ID - 192.168.210.1

  Network 10.21.0.0 255.255.0.0 area 1

  network 192.168.210.0 255.255.255.252 area 0

  area 1

  Can anyone help me please with this problem? There could be a bunch of superfluous things here, and if you could show me, too, I'd be very happy. If you need more information on the config, I'll be happy to provide.

  Hello Kenneth,

  Based on the appliance's routing table, I can see the following

  C 10.21.9.0 255.255.255.0 is directly connected, DeviceManagement

  C 10.21.3.0 255.255.255.0 is directly connected, servers

  C 192.168.210.0 255.255.255.0 is directly connected to the inside

  And you try to connect to the 3 of them.

  Politics of Split tunnel is very good, the VPN configuration is fine

  The problem is here

  NO_NAT list of allowed ip extended access all 172.31.255.0 255.255.255.0

  NAT (inside) 0-list of access NO_NAT

  Dude, you point to just inside interface and 2 other subnets are on the device management interface and the interface of servers... That is the question

  Now how to solve

  NO_NAT ip 192.168.210.0 access list allow 255.255.255.0 172.31.255.0 255.255.255.0

  no access list NO_NAT extended permits all ip 172.31.255.0 255.255.255.0

  NO_NAT_SERVERS ip 10.21.3.0 access list allow 255.255.255.0 172.31.255.0 255.255.255.0

  NAT (SERVERS) 0 ACCESS-LIST NO_NAT_SERVERS

  Permit access-list no.-NAT_DEVICEMANAGMENT ip 10.21.9.0 255.255.255.0 172.31.255.0 255.255.255.0

  NAT (deviceManagment) 0-no.-NAT_DEVICEMANAGMENT access list

  Any other questions... Sure... Be sure to note all my answers.

  Julio

• Problems with the help of Deskjet 3745 on home network 2-PC

  I have an old PC running Windows XP SP3 and a new one running Windows 7, but only one printer. The network that connects the PC is on an ADSL router with its own external Iomega network drive with a USB port.

  To make the printer can be used on two computers,

  1. I initially plugged on the Iomega USB port. But the port was effectively a 1-way connection, so I couldn't preview before printing to see which form/profile of the printer used. So I put discarded and...
  2. revenue to the printer connected to a PC all the time and share it on the network. But two different PCs drivers needed which would not talk among themselves, and the establishment would simply not work.
  3. Finally, I went back to the simple method of the printer on the USB port of any PC, sure I needed it for us. Worked well for a while until the WINDOWS 7
  • Print preview has begun showing empty images (but print correctly).
  • print-queue doesn't have to face the cancelled documents.

  I had help of Deskjet Support to address this issue, which even reinstall the drivers on two PCs - several times! But I'm still left unresolved 3 problems with Win 7 donations.

  Has anyone encountered a similar situation and found a satisfactory solution to work?

  Try the following: connect the printer to the XP computer and set the machine XP to share it on the network.  On the Windows 7 machine go devices and printers folder, add a printer, a local printer, create a Port, Local Port, \\Computername\Printername (use the name of the actual share of the computer and the printer), OK, and then click Windows Update, and then select (not Hewlett-Packard) HP Deskjet 3740 series (Bobo).

• Problems with 9191 chassis for connection to a wireless network

  Hello

  I can't seem to connect a 9191 unit to our network wireless with WPA authentication mode. I am trying to connect to based on SonicWALL TZ 105 Wireless access point router. Our wireless network is configured with the WPA2-PSK security. When I go to the page of network configuration of 9191 our network appears, but then I get the error 'Invalid WEP Key' when I enter the security key and try to save the configuration (see picture). I tried to use the configuration according to MAX and the web. I have also established that the wireless connection can be done if I change the security mode of the router to WEP, but neighther WPA - PSK or WPA2-PSK work. I have not tried security modes of type business because they are not setup on our network. I tried to play with the WPA security settings, but did not have much chance.

  Any advice will be much appreciated!

  Kind regards

  Misha

  Hi Misha.

  Apologies for not being clear - I was referring to the memory on the option of manual entry.

  Under network, select "other network".  This will allow to you manually type of entry security, SSID (network name) and WPA - PSK passphrase.

• Problems with the print settings

  Hello everyone,

  I try to print a file from photoshop cs5 and want to evolve my media without resize my image. I made sure the appropriate size of media is not checked, but whenever I tried to change the paper size the image changes with it. Also how to untie the scale, height, width options? Here is the a screenshot of my situation advice?

  As Noel said, it would be more useful display the entire dialog box. Also what printer are you using? Dialog boxes change another manufacturer in photoshop based on the printer driver. Therefore, it is difficult to give advice.

  Sounds like you have a small document say, 4 "x 5" and you want to print it centered (I presume) on a sheet of 8.5 x 11 "

  Yet once, as Noel said, select you the paper size in your print to the Printers dialog box. The document does not change size.

• Problems with the windows computer 8 loss of wireless connection?

  I'm on my 2nd NEW Dell with Windows 8 in the last 3 weeks. I use a Trendnet Wireless router to connect to the internet. The 1 Dell computer dropped the signal wireless on the 2nd day I got it. The 2nd Dell computer began the wireless signal very frequently the 5th day I got it. My Dell Inspiron 1545 computer that is 3 years old, 1 year 6 months never old old ipod and iphone removes the wireless signal. Help, please!  I've been in contact with Dell several times with any resolution of this problem,

  I'm on my 2nd NEW Dell with Windows 8 in the last 3 weeks. I use a Trendnet Wireless router to connect to the internet. The 1 Dell computer dropped the signal wireless on the 2nd day I got it. The 2nd Dell computer began the wireless signal very frequently the 5th day I got it. My Dell Inspiron 1545 computer that is 3 years old, 1 year 6 months never old old ipod and iphone removes the wireless signal. Help, please!  I've been in contact with Dell several times with any resolution of this problem,

  I have a new laptop from Toshiba with WIN 8 pre-installed, and I have the same problem.  I ran the program of problem determination and it reset the WiFi card and fixed an issue reported.  He canned breed, I have 2 WIN 7 laptops who have no problem at all.

  Symptom: In normal operation, the wireless connection to the router drops to limited connection (No. Internet).  It does not actually lose the router, he loses just an internet connection.

  Update - has visited the Intel site to check the drivers.  They had an updated driver, even if the driver search said I was current.  I updated the driver and 24 hours later I got not drops.  I hope that fixed it for me.   http://www.Intel.com/p/en_US/support/detect/wireless

• Tecra M5 - SD card reader works with the factory settings

  Hi all
  My SD card reader has been in place. It will read a few cards of 4 GB and won't read other (usually newer).
  All cards in this problem area are Transcend cards 4GB SD (HC or whatever the format more later is)
  The cards, the M5 will not read can be read both my PDA, but also an old Tecra 9000 (who will also tell the other 4 GB cards)

  The PC was recently engineers have a problem so I asked to look at this problem. They reported that it was a software problem, because if they load the recovery CD (that is, to bring the machine to factory State) the SD card reader reads cards problem OK; Back to my setup and the SD card reader can not read cards SD - error message is "the request cannot be performed because of an i/o device error."

  So I guess that I need new drivers. Very well except that it has no drivers for the drive SD card itself. Its a part of the motherboard. There is a 'secure module SD' on the download from Toshiba site and I downloaded and installed the SD Secure module (dated 2008)
  However, Device Manager still shows that the SD host controller driver is Microsoft version 01/10/2002 6.0.4069.5

  If anyone has ideas on how to fix

  TFA
  R

  Hello!

  > back to my setup and the SD card reader will not read SD cards
  Can you explain what you mean, please?

  I put t understand why you n t run factory if it s a software problem. I never had problems with the factory settings because then I can make you that all functions work properly on my laptop.

  Good bye

• Issues with the display settings - all super tiny

  I have problems with the display settings, all of a sudden, everything was super great and difficult to see all the toolbars on the screen, I went to the settings display, and somehow managed to make everything incredibly tiny.  I found a page via the display settings (avancΘs?) that allowed me to adjust the percentage of the elements on the screen.  I reduced to 40%, and then the setting stuck and now I can not see or read anything.  I'm trying to return to the display settings, but I can't find this 'page' which allowed me to make this change.

  I saw a similar post:

  "I messed up my display settings. my resolution is so great that I don't see anything but black vertical lines and sets of 3 white dotted lines in sequence across my screen. my mouse can not be seen either. is there anyway to restore my original settings? It's as if everything is bigger there should be 200 to 300%.

  Hello

  There are a few things you can try:

  1. reboot the PC then start tapping the F8 key until you get the Windows Advanced on-screen Menu of Options.

  Then choose "last good known Configuration". Allow Windows to start.

  2. restart PC then start tapping the F8 key until you get the Windows Advanced on-screen Menu of Options.

  Then choose "Enable VGA Mode". Windows XP loads with the color values that can handle your "lower" resolution and display driver Once in Windows, change the resolution, then restart the PC.

  3. try to go into "Safe Mode", which is accessible in the same way as "VGA Mode". "Review the same routine as no. 2.

  I tried to hit F8, but nothing happens, I tried to reboot several times.  How do the Advanced Options?  Someone knows it the screen that I talk with the possibility of adjusting the percentages, how can I find it again?  So I can not really read or see anything.

  Hi fixxazd,

  For instructions on starting in the advanced system recovery options, see the following articles:

  A description of the options to start in Windows XP Mode

  Advanced Troubleshooting for General startup problems in Windows XP

  See also:

  How do advanced clean boot troubleshooting in Windows XP

• Since I load Acrobat Reader DC, when I try to save the document, word to PDF, the pdf file pages are cut on the width. I use Microsoft Office Word 2007 and I have no problem with the previous version of Adobe Reader. Should what settings I adjust?

  Since I load Acrobat Reader DC, when I try to save the document, word to PDF, the pdf file pages are cut on the width. I use Microsoft Office Word 2007 and I have no problem with the previous version of Adobe Reader. Should what settings I adjust?

  Hi judithl34724699,

  If you want to convert Word files to PDF with the Adobe Reader application then it is possible with the service Pack of PDF. Try to use the service on the web: https://cloud.acrobat.com/convertpdf

  Also try to use a different file type.

  Thank you

  Abhishek

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Sierra Siri, «I have some problems with the connection...» »

  Guys,

  I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

  Any ideas?

  Thank you

  N

  It's a network problem.

  Check the proxy settings that blocks maybe, or a firewall.

  System Preferences > network > Advanced (for your current connection) > Proxies

  Something there?

• Hello! Someone has some problem with the haptic on Macbook 12 "2016 function? It does not work on my Mackbook.

  I'm trying to figure if someone has my problem with the haptic on Macbook 12 "2016 function. The option is checked in the preferences system, but it does not work.

  Thank you

  Hello luigi10m,

  Thanks for posting on the Community Support from Apple. From your post, it looks like your haptic feedback does not work when you click using your trackpad and the setting is enabled. I know that this is a great feature and it is important to make it work. I'll be happy to help you.

  First of all, I would like to assure you that in system preferences > Trackpad > clicking silencer is not checked, that might help. In addition, it would be useful to reset the settings of the SCM. You can find instructions here: reset the management system (SCM) controller on your Mac - Apple Support

  I'll also include those for you here:

  1. Stop the Mac.
  2. Plug the MagSafe or USB - C adapter to a power source and to your Mac.
  3. Use the built-in keyboard, press shift-control-Option on the left side of the keyboard, then press the power button at the same time.
  4. All the keys to unlock, then press the power button to turn on your Mac

  Take care!

• I have a problem with the content of spam. Somewhere in the Fox appeared script that's choking me audio spam. Every 30 minutes he's playing an audio clip that is malicious.

  Hello.
  I have a problem with the content of spam. Somewhere in the Fox appeared script that's choking me audio spam. Every 30 minutes he's playing an audio clip that is malicious. I can't find the settings as it eliminated. Now, I don't have any plug-ins and Add-ons strange that were not initially in the Fox, but the problem is there.
  I use the Fox years. The problem, he had 1.5 months after Fox cleaning. If the problem can't win, I'll be forced to give up the browser, and I wouldn't.

  Could test you mode without failure of Firefox? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  Does not work if Firefox: Hold down the SHIFT key when you start Firefox.

  If Firefox is running: You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  and OK reboot.

  Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

  Any improvement?

  If the problem persists in Mode without failure, could reinstall you Firefox in this way:

  Clean reinstall it

  We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (1) download a fresh Installer for Firefox 38.0.5 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (2) close Firefox (if applicable).

  (3) to rename the program folder, either:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\OldFirefox
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\OldFirefox
  

  (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

  Any improvement?

  Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:

  • \OldFirefox\Plugins
  • \OldFirefox\browser\plugins