Similar Questions

• Problem with the app on iTunes downloading updates

  In recent weeks I had problems with the availability of the Apple download servers.  Most of the downloads are refused because the server is not available.  If I manually choose each update I can get them later.  All the other progs work very well and iTunes diagnostics are all OK.

  Is this a general problem?

  I use iTunes ver 12.3.3.17 64-bit on Windows 10

  Try a forced reboot hold home and Sleep/Wake buttons simultaneously for about 15-20 seconds until the Apple logo appears. You won't lose anything.  Then sign out of the iTunes Store and log in.

  
  

  Depending on your situation, it is possible that the servers may be busy as well.
  

• Problem with the latest Vista Service Pack Update

  Recently, I have intalled SP2 on my computer.  It seems to work very well on my desktop, but when I installed it on my laptop, it went through step 3 Setup (after the break).  At this point, it says it installs and shows 0% installed for several minutes, date at which it says stop, then it restarts and goes to step 3 Installing and this all over again.  I read in the installation it would probably close and restart the computer several times.  However, after about 3 hours of this continuous stop and restart, I get the same result.

  I had to hard boot the computer date to which I tried to restart in 'Safe Mode '.  I thought take it back to a restore point and forget the update.  However, it continues to do the same thing and so I'm TOTALLY unable to use my laptop.  HEEEEEEEEELLLLLLLLLLLLLLLLLLPPPPPPPPPP!

  Hi TM1Designer,

  Try the method below and check if this help.

  Method 1: Perform the clean boot your computer.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
   
  To perform a clean boot on a computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
   
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  Please follow the system in the boot environment. If the problem does not occur, it indicates that the problem is related to an application or a service, we have disabled. You can use the MSCONFIG tool again to reactivate the disabled one by one element to find the culprit.
   
  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
   
  For more information visit: http://support.microsoft.com/kb/331796
   
  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.
   
  To restore your computer to a Normal startup mode, follow these steps:

  1. click on start in the box start the search.
  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart.

  Hope this information is useful.

  Umesh P - Microsoft Support

• Problems with the new office of Windows Update January 14, 2014

  The update on the Windows desktop appears to have downloaded on my laptop and then request e-mail/password or a key product to allow it. When I click on the product key, a small window opens with the message get your new windows of office ready for you... it will take a few moments... and then crashes on this message, so I can't put a product key or closed Word / Powerpoint downwards. Does anyone have any suggestions on what I need to do this issue?

  Hello, Beverley,

  Thanks for the information and apologies for the late reply.

  I suggest to reset Windows update components and then check if the problem persists.

  Important this section , method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How to back up and restore the registry in Windows

  Please reply with the results, in order to help you solve the problem.

  Thank you

• Problems with the Revel v 1.10 update

  Hello.

  After the update to v 1.10 Revel stops working on my Mac (on the iPhone it works well).

  After lauhing I see 'black screen' and menu bars does not work (see attached screenshot).

  Why is it possible?

  I tried to reinstall Revel, to remove the old file from the library of Revel - nothing works.

  I have OS X v.10.8.3

  Thank you.

  

  Good to hear that. Enjoy using Revel.
  Let us know if you have other questions about Revel

  Thank you

  Scott

• Problem with the rules after upgrade of the VM in foglight cartridge

  Hello

  There is a small problem with the rules after that I updated the VM cartridge level.

  In the default rules, I changed a few settings so that they will act as I need.

  However, each time I upgrade VM cartridge my rules are off and marked as backup.

  The question is: is there a way to upgrade the cartridge and keep my active rules after upgrading?

  Best regards

  Victor

  This is the normal behavior according to this KB article

  https://support.quest.com/SolutionDetail.aspx?ID=SOL105872&PR=Foglight

  105872 knowledge article

   
  • return

  • Title

    Backup rules fill in the dashboard management rule after Foglight upgraded

  • Description

    After that an upgrade of Foglight was conducted, several backup rules are created for rules that have been published before the upgrade. For example:

    Cluster VMW IO network
    Cluster VMW IO network (backup)

  • Resolution

    During the upgrade procedure, the FMS has detected that some of the original rules have been changed in some way. It copies the rules previously upgraded in backups, before trying to merge the contents of the update rule in the former.

    Assuming that the FMS works as expected, the rules of backup can be deleted. However, it is best to confirm this in the respect of the rules first before making deletions.

    When editing rules, particularly rules OOTB (out of the box), it is recommended to copy the original rule, disable the original rule and edit the copied rule. This should reduce the risk of the problem described in this Article.

  Golan

• ThinkPad X 230 Windows 7-64: problems with the screen after updates

  Hi all

  I have a problem with the Thinkpad X 230. After a recent update of Windows 7 (64-bit), the screen resolution is set to 800 x 600 and brightness to the minimum. FN + F8/F9 does not work. The brightness is uncontrolled. I had to restore the system before the update.

  How to solve the problem, do anyone know?

  Thank you!

  Isosik

  Hi Isosik,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the display resolution on your ThinkPad X 230.

  If you have updated the drivers from Windows update, sometimes this kind of problem occurs with windows generic drivers for cause of driver incompatibility, suggest always update drivers only via the ThinkVantage System Update utility. Update only the application of Microsoft Windows Update.

  You can also manually download the drivers from the Lenovo support site.

  Lenovo support site.

  I hope this helps.

  Best regards

  Agnes Kumar

• I have a problem with the background update

  I pushed on Adobe Acrobat Reader DC via MSI for all my workstations that are Windows 7 machines.  The installation went without any problems, but I didn't know that the program updates automatically and it is in the diary of the events of these errors.  Product: Adobe Acrobat Reader DC - update '{AC76BA86-7AD7-0000-2550-AC0F084E7200}' could not be installed. Error code 1625. Windows Installer can create logs to help solve the problems with the installation of software packages.  Is there a way I can either A) disable these automatic updates or B) force these updates to cross even without administrator privileges?

  Hi orangejake1990,

  Disable you updates in Acrobat Reader ms, please refer to this link Windows updates.

  Otherwise, you can manually download the updates Adobe - Adobe Reader: for Windows & push.

  Kind regards

  Nicos

• Print problems with the recent update to Version 10.11.5

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Roger 510 wrote:

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Have you checked with Epson for an updated printer driver?

• I encountered the problem with the last iOS 9.3.2 update I can't receive call from people, I can call any body, but when l'm calling people any body can ring me just now, I thing the problem where new soft

  I encountered the problem with the last iOS 9.3.2 update I can't receive call from people, but I can call any body, but when l called people any body can ring me only at this time, I think that the problem of the new update. can u check this and answer my question.

  and my phone

  iPhone 6plus

  You see a Crescent Moon at the top of the screen icon? If Yes, disable does not bother to: settings - do not disturb = Off.

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• I have an iMac7, 1 with Intel Core 2 Duo 2.8 GHz, 2 GB memory, 500 GB storage, iOS10.6.8 and can update in 10.11.2.  must I do cela or are there problems with the upgrade?

  I have an iMac7, 1 with Intel Core 2 Duo 2.8 GHz, 2 GB memory, 500 GB storage, iOS10.6.8 and can update in 10.11.2.  must I do cela or are there problems with the upgrade?

  I don't know about other issues. There are always 'problems' with any upgrade. You weigh against the benefits. I know that you need more RAM. At least 4 GB, maybe more if you can. Don't forget that this system is produced at a time when most of the machines have + 8 GB RAM and when Apple said 'minimum' they really mean it.  I recently inherited a MacBook that has 2 GB of RAM and the Mavericks. When I checked the memory, the use of the system was using 1.95 GB = nothing to run applications!

• I have problems with your e-mail via a web client is sending no text in the body and sending HTML instead of text.

  I have problems with your e-mail via a web client is sending no text in the body and sending HTML instead of text.  I am told that this problem is because of the BING toolbar on my browser - is this correct?

  original title: Messaging with the BING toolbar problem

  I suggest blind carbon copy yourself e-mails coming out in the future to check for other errors and if they happen then find a new Web hosting provider.  They should have been aware of the conflicts, one would presume.

  Steve

• Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

  Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

  Take a look at this article as it addresses this error code. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Anyone know if there is a problem with the "Windows Update" site? Since May 11, 2010...

  Anyone know if there is a problem with the "Windows Update" site? As of May 11, 2010 I could not access it for 2 days now.  I get an error report indicating that he has a "problem with the site '... Not sure if it's my computer or the site itself. I just need to check updates and download them. I would be grateful for any feedback...  Thank you!
  ~ Jenifer

  It is without a doubt.  There were a few patches published today, and I was able to update all my machines successfully.  This looks more like a virus problem.  Have you run a virus scan recently?  Many times, if you are infected the virus will prevent you to access Windows Update.

  You can also use Microsoft Fix It to reset the Windows Update components: http://support.microsoft.com/kb/971058.  This could also be your problem.

  Let me know how it goes,

  Barbara