Problems with the one backup. MSWMM file to. WMV

Similar Questions

• SE "There are problems with the configuration of static files in your environment" after the APEX 5 install using Oracle HTTP Server

  There is not much information in the doc around the new configuration of static file.  Someone at - it an example of this dads.conf he file should look similar to static files?  Everything else seems to work fine - it's my only hang up now.

  Thank you!

  Exact pop-up message:

  There are problems with the configuration of static files in your environment.  Please see the section "Configuration static file Support" in the Guide of the Installation Application Express

  I figured it out on my own - the doc has a section "6.5.4 configuration Support for static file" which basically said yes, it is now supported for static files, then a "see also:" link to the dads.conf section, that I'm not good enough to see there are now 2 new parameters in your dads config file...  All is ready!  It works!  YAY!

• Error downloading Photoshop element 12: Arvato Berthelman - Download Manager error - unfortunately, there is a problem with the link to that file. This problem may be due to the number of users trying to download

  Error message when downloading Photoshop element 12: (I bought the license in a store)

  Berthelman arvato-

  Download Manager error-

  Unfortunately, there is a problem with the link to that file. This problem may be due the number of users trying to download the file, or the product may no longer be available. Please as minutes of a few in. If this privilege is still not available, please contact customer service at the address [email protected] or number 604-915-5200

  == > Les DEUX @ and phone number are fake!

  Hi Mireille56,

  The place where you are trying to download the software.

  [email protected] is not an email from Adobe Support.

  Please try to download Photoshop elements 12 of: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=ZPQM

  Kind regards

  Rave

  < translated="" via="" google="">

  Hi Mireille56,

  Where you are trying to download the software.

  [email protected] is not an Adobe support email.

  Please try to download Photoshop elements 12 from: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=ZPQM

  Kind regards

  Rave

• Error: "Canoe Photo window Viewer save the changes to this picture because there is a problem with the property of photo file" when trying to upload photos from the iPhone to the Windows Photo Viewer.

  Original title: saving photos and videos, common sense?

  JW why I can't save a picture to the top of the right way in my windows photo viewer and Media Player (same for video too) so when I download my pictures frim my iphone on the computer a few photos have been taken vertically, and when I go to put the image a gardener would come saying ' canoe photo window Viewer save the changes to this picture because there is a problem with the file of. properties of photos? What can I do to fix this?

  JW why I can't save a picture to the top of the right way in my windows photo viewer and Media Player (same for video too) so when I download my pictures frim my iphone on the computer a few photos have been taken vertically, and when I go to put the image a gardener would come saying ' canoe photo window Viewer save the changes to this picture because there is a problem with the file of. properties of photos? What can I do to fix this?

  =============================================
  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• Problems with the conversion of Word files to PDF via macro

  I have a weird problem with the Acrobat add-in. I want to convert a lot of files with the Word Add-In in PDF files. The printer is no option because it causes other problems.

  So I created a small macro for Word that transforms all the Word of a directory of files PDF files. The macro works great, but PDF files look right.

  I show you the problem with a Word file, first converted manually, then with the macro:

  First of all the image:  If the file is converted manually, it seems that the Word file and fonts are included.

  

  Second picture: If the macro converts the file it doesn't seem correct and the fonts are usually not included.

  

  I use Acrobat XI and Word 2010. The macro command is:

  ' new name for PDF
  pdfName = Replace(Replace(verz & "\" & fi.Name, "docx", "pdf"), "doc", "pdf")
              ' convert Word into PDF
              ActiveDocument.ExportAsFixedFormat OutputFileName:= _
                  pdfName, ExportFormat:= _
                  wdExportFormatPDF, OpenAfterExport:=False, OptimizeFor:= _
                  wdExportOptimizeForPrint, Range:=wdExportAllDocument, From:=1, To:=1, _
                  Item:=wdExportDocumentContent, IncludeDocProps:=False, KeepIRM:=False, _
                  CreateBookmarks:=wdExportCreateHeadingBookmarks, DocStructureTags:=True, _
                  BitmapMissingFonts:=False, UseISO19005_1:=False
  

  I did not, but the trick is to realize you don't want specific action. Rather, you want to treat a directory. DOCX files in the directory will be converted to PDF, then actions (if any).

• Help. Very stupid problem with the placement of word files.

  As you can see I am a beginner total to Indesign. I don't know how but I can't place any text imported from Word into my project. Weird thing that if I create a new document it works. However, in this project I've done a lot of styles and other things so I don't want to start from scratch, so the question is:

  Is there some option "I accidentally the entire project" and is anyway to fix it. [Or maybe export styles and master pages to another document?]

  The problem with the placement of text word said that the text is too big (Red Cross).

  InDesign CS6 30 day trial.

  Post edited by: Niebieski_Mak

  Ok.

  There are a number of possibilities for what are the causes of the text immediately became excessive. Is usually only a problem with a youove of added restrictions that makes a too wide to fit in the frame line (but it can also occur if you have a set of "keep the option" which requires the text to stay together and there is inusfficient space to hold all the lines, or requiring that the text starts on an odd page / hand and the one you have is wrong).

  The most common cause is probably the wrong application of the No. Break attribute. New users sometimes confuse this to how to disable hyphenation, but in fact it prevents any text to which it is applied to break even between words. Next most common, I think, is a long text string with nonbreaking spaces between the words (I see a lot of this in Word documents), and not allowing not standard, yet once, there are no place to get out.

  I've also seen cases where the format for the text calls for a font size of very large size, which makes it impossible to fit the text, or when the dashes from left or right, in the paragraph style, override local formatting or text block options, are too large to allow the text to fit.

  The best way to find out, in my opinion, is to choose the frame then go to Edition > edit in story editor, you can see and select the text and check these things.

• Problem with the PC Backup on the external DRIVE on the network drive home.

  I made backups of my laptop wirelessly through my router to my connecting external hard drive attached to my desktop, when I used Microsoft OneCare. Since then, OneCare is being abandoned, I decided to go to the basics of Microsoft (MS). Unfortunately, Ms Essentials doesn't have the features of OneCare. I try to perform a backup using the backup and Restore Center, however, I get an error message when I put backup settings to location network - error code: 0 x 80070534, no mapping between account names and security IDS was done... the results. Is there a KB or a fix for this problem? I've looked everywhere for answers and keep looking, however, I have found no solid solution (especially scams, i.e. pc scanners and fixers of registry error). How is it that I could make a backup without problem with OneCare (that I have no more:{{class=fontblue}} {.}) Now I try to do through the Center backup and restore, the backup does not work! It makes no sense at all!  I have Windows OS: Vista Home Premium 32-bit 2 Gb RAM SP2; HARD drive external: Maxtor 3200 (320Gb) hdd personal

  Thanks, I found the problem. I had to uncheck the ReadOnly property on the folder that I traced to use for my backup location on my HARD drive. In truth, the property read-only (checkbox) is not checked, it is filled (designates the system setting) with a green square in the box (on my Windows XP desktop). I'm sure that others have missed this little nuisance. It's cheating. I don't know how many times I looked at the folder that I use for my backups, forget to realize that the ReadOnly is the default setting for the file. I no longer get the error message: 0 x 80070534, no mapping between account names and security IDS was done. I can't believe it's just as simple as that! My backups work fine.

  Karena, R, thank you for your time and help in any way.

• Problem with the creation of text file 9530 unit

  Hello

  I created the text file in the memory of the device "file:///store/home/user/sample/mytext.txt" with a text using my application. He created the file with the extension "mytext.txt.rem". While I couldn't able to read the same file.

  I tested the same application with 8520 and its works very well... It creates the file "mytext.txt" only.

  I don't know why the name of the text file adds extension ".rem" in 9530.

  Could you please help me to findout the solution?

  Thank you

  SmartPhoneDev

  You have enabled encryption.  Have a look here:

  http://supportforums.BlackBerry.com/T5/Java-development/why-my-text-written-to-a-file-on-the-SD-card...

• Problems with the interrupted backup

  I need your help. I have Windows Vista Home Premium 64-bit. I back up my computer (I used 17 8.5 GB DVD), and moved to my computer, it came a message that the last backup is not closed. I tried to take over the task, but I came across the message that tell me to insert disk # 1, who assume that the system could be restart the entire backup process. My question is if there is a way to resume the backup from the point of interruption?

  When the backup to removable media is no option or a way to force the backup to a failure during the backup.  You have to start all over again.

  "CRMMAIA" wrote in the new message: * e-mail address is removed from the privacy... *

  I need your help. I have Windows Vista Home Premium 64-bit. I back up my computer (I used 17 8.5 GB DVD), and moved to my computer, it came a message that the last backup is not closed. I tried to take over the task, but I came across the message that tell me to insert disk # 1, who assume that the system could be restart the entire backup process. My question is if there is a way to resume the backup from the point of interruption?

• problem with the one of the objects to OBIEE

  Hello
  I have a question for you. I use OBIEE version 10.1.3.4.
  
  What are the cases you've seen related to changing the name of indicators or presentation table?
  
  I have a flag called "Recipes" in the presentation Table 'Revenue KPI'.
  
  This indicator is called in a report.
  
  What happens to the report if I rename the indicator or move the indicator to another table of presentation or rename the presentation Table?
  Alias always works?
  
  Do you have tips on how to maintain consistency between what is in the presentation of the RPD and what is used in reports and dashboard?
  
  
  When I change the name of a report included in a dasbhoard dashboard does not recognize the new name.
  Any suggestions?
  
  Thank you.
  
  Sara

  Hi Sara,.

  I just wanted to throw my 2 cents in here too. I agree with what everyone else said so far. I just wanted to mention a recovery method where you start to encounter some issues with too many links are broken between areas/presentation tables/columns object and your report. In this case, you can always open your Catalog Manager tool, navigate to this report and open it is XML. The XML contains all the original names of the columns, tables, and fields. In the worst scenarios, if you have an application that has a lot of mistakes, you can correct manually it is XML for re - sync with the correct names.

  That being said, wouldn't it been nice if these things have an internal ID and not all this kludgy 'alias' strategy depended (someone please tell me this is remedied in 11g).

  The other thing to remember is that when you rename an application or dashboard, ALWAYS use the function rename the chip in Catalog Manager. This intelligent feature resolves all references to the names of catalog objects. So if you have 5 pages of dashboard that sail the same report in detail, and you think you want to change the name of the report in detail, and then use the function rename the smart and OBIEE will automatically fix the references in 5 dashboard pages.

  Best regards

  -Joe

• Problem with the playback of media files

  I'm unable to read the files directly by any player... Each time, I have to choose 'Open with' Option.I has even changed the Option default WMP or VLC etc... But again if I want to play another file... I have to redo the same process... How do I solve this problem... ???

  Hello

  WMP have not perhaps not all of its default settings. Go to control panel, click default programs, and when this window opens click Set your default programs, and then when that window opens click on Windows Media Player in the list of programs, left column and in the right column, click Set this program as default. Wait for the app finally assigning all faults and then OK and then close the Control Panel application.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Problem with the opening of PDF files

  so my problem is that I can not put an Adobe Reader as main software to open PDF files.

  I try with this

  Select a PDF file on your disk. Right click, choose "open with > program chose. Select the drive, and then click the box that says "use the selected program to open this type of file.

  but nothing happens when I select drive. It shows that even on the 9 and 10 version. I try to reinstall, and it does not help...

  Please take a look at the response of Ramesh Srinivasan on: th-open-with-menu/76b17b64-2fe3-4c08-ac80-0ba80334dd8e http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/problem-wi

  This should solve the problem.

  Ankit

• Problem with the color when sending file AE to first.

  I am very new in the world of After Effects. I made a video where I asked a black and white hue on a color video. I cut out a specific color of the color video and

  everything in the reading seems correct. The isolated color is exactly where I want it and the rest of the colors are made to be black and white. However, when he goes

  Back to Adobe Premiere all color refers to the video and not isolated color I've done in my file of AE. I don't know this is a very simple solution and because I'm new to

  This I skip a step which can be primary. Help is very appreciated.

  Without knowing anything about your effect, structure of the layer and so now no one can tell you a lot. As a first step, make the timeline in the first. Very little of what makes AE is in real time in such a way that it would return immediately to first. Most of it must be rendered, give or take a few effects that have been optimized.

  Mylenium

• Problem with the binding of AutoCAD files

  I have Dreamweaver MX. I had my site running on my place of work on Netfirms, but when I switched to its new host. Many broken links and now I can not get my AutoCAD files to open. I get the error that the page is not found. I looked online, bought books, called support, and I am puzzled. The files are loaded and linked. I checked all the links on my site. I had a problem before on Netfirms and found how fixed by adding 'download' in front of AutoCad. Any suggestions are welcome. It acts as the files are not loaded. Here is the site. http://69.80.208.228/asmproductscom/Woodcore%20Details.htm
  
  Thank you for your time.

  Finally, I had, but I had to winzip them and then upload them. They would not charge in form of AutoCAD files for reason. I could load images and anything else, I put in the same folder, just not them.

  Thank you for your help.

  http://www.asmproducts.com/FS%20Details.htm

• Big problem with the plug-in download file!

  It is impossible to download eclipse plugin and the plugin for MS Visual Studio.

  I am in Korea and I'm trying to download this a lot but the interruption of the connection. I did my best to get these.

  If anyone can share these plug-in for me?

  I am bagging you please!

  Contact [email protected] for help with this.