Problems with Time Capsule

Similar Questions

• Cannot view or connect to the Wifi network of 5 GHz with Time Capsule from Apple 5th generation

  I have a new Apple Time Capsule 2 TB with 802.11ac network support. I have setup my base station in order to disseminate the 2.4 GHz and 5 GHz network SSID. I have 2 apple (iPad Mini and Macbook Pro) time devices can see and connect to Terminal 5 GHz network however I have also a Lenovo Vibe P1 phone (dual band wifi supported) and Samsung Galaxy Tab S compressed (dual band wifi supported) and these devices cannot see or connect to the network of 5 GHz of Base Station. I also have a Cisco router that has a dual-band support and all my devices can see and connect to the network of 5 GHz of this router.  So I wonder why I have this problem with time capsule?

  I have reset my base twice station and it is a new device purchased last month.

  Any help or suggestion is appreciated.

  Did you use the SMB compatible names for everything...?

  That is to say the alphanumeric short, without spaces and Pure...

  for example base station name... TCgen5

  name TCwifi wireless

  Have you also used the password corresponding to these requirements... but can be between 8 and 20 characters.

  If so, then you must give a different name to 5 GHz and delete the password and test... If it's not yet connect the test manually on channels 36, 44, and 149 for example if you are in the USA...

• Have problems and questions with Time Capsule were addressed in any significant way. Reluctant to buy according to your comments.

  Have problems and questions with Time Capsule was dealt with in a meaningful way? Reluctant to buy according to your comments.

  Apple did not have any material changes to the time Capsule to nearly 3 years. The only change that has occurred in the last 18 months or so is a firmware update to address security issues.

• How can implement you not with Tim Capsule and AirPort their simulation on the iMac?

  Hello

  How can implement you not with Time Capsule and AirPort their simulation on the iMac?

  I don't know what you're asking.

  AirPort Extreme is a wireless router.

  A Time Capsule airport is an AirPort Extreme with a built-in hard drive for data storage.

  An iMac is a Mac computer.

  An iMac is not a wireless router, so he is unable to perform the functions of a wireless router.

• process step by step new airport express from apple with time capsule base of connection (cable cat 5 150 Ft) with late 2008 macbook

  I would like a step by step process apple a new airport express with time capsule base of connection (cable cat 5 150 Ft) with late 2008 macbook.

  Connect one end of the long Ethernet cable (we assume that you have already tested the cable to make sure it works correctly) one of the three ports LAN <>- on the Time Capsule to the WAN port on the AirPort Express "O".

  

  We assume that the AirPort Express is new, is powered OFF... and has not been previously configured.

  Turning off the Time Capsule

  Wait a few seconds

  Put in the Time Capsule market and let it run a full minute

  Power of the AirPort Express and run a full minute. Currently, the indicator light of the Express slowly flashing orange

  On the MacBook, click the WiFi status menu icon and search for a list of the new AirPort access point

  Just below this list, click on AirPort Express

  

  Who will get the "Assistant" operational configuration. It will take a few seconds for the wizard to analyze the network and offer the correct setting in a display that will look like the example below, except that you can see your cameras and the name of your wireless network.

  

  In short simple name you want to call the AirPort Expressof type... .as OfficeExpress, for example

  Click Next

  Watch the next screen carefully to confirm that the AirPort Express is in place to extend using Ethernet, which confirms that the installation wizard recovers the wired between the Time Capsule and AirPort ExpressEthernet cable connection, so the settings correct configuration will apply.

  

  When you see the message Setup is complete, click done. Close the installation window, and you're done.

• Problems of compatibility with Time Capsule

  I have a Time Capsule, which seems to be only compatible with Snow Leopard.  My software is OS X 10.9.5 (13F1603). Live in glue, I would back up my MacBook Pro to the Time Capsule as the internet is slow, but it seems that if they are not compatible with each other.  Any ideas as to what I can do?

  A time Capsule will work with any Mac operating system.

  You are right that the BONES later has more good problems.

  Here's my standard set of instructions to work things out.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

  4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

  5 attach the TC disc into the computer manually.

  In Finder, go, connect to the server in the main menu,

  Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

  You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

  However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

  6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

  

  It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

• Problem of Time Capsule Roaming Network airport

  I'm having a problem by establishing a network of roaming.  When I plug my extender devices in ethernet cables through a switch to my Time Capsule base station, my wifi signal drops 150 + MBS next to the base station to < 10 mbs.

  I have a wifi in my home network based on a new time Capsule airport base station (ATCBS) running firmware c. 7.7.7.  I have my 4th gen AEBS & a 2nd gen Airport express both race v. 7.6.7 updated firmware in place in Bridge mode to extend my network in different rooms in my house. The system works very well, but I wanted to increase the power of the signal in remote places so decided I would like to convert it to a mobile network by installing ethernet cables to connect my ATCBS the AEBS and express extensions.  I use a switch Netgear 5 port (NOT of GS205-100) that I only have a single LAN fanless available left port on my ATCBS.

  I installed 3 ethernet lines-1 each in rooms with my ATCBS and airport express using mounting wall punch down taken using the convention of wiring 568B, AEBS.  These lines all end with male plugs in a unique space in the basement and are also wired as 568B.  Then I plug the ATCBS, AEBS and express lines in the switch in this remote area.

  I've done a few connection cables in the role of Cat 6 cable, I had over the House, and they all very well with my cable Tester check so I know the cable itself is not defective.  The cables all run in the basement where I can see, so I know there is not any problem to be crimped/damaged.  I have not any gear to test the installed well son.  I visually inspected the male and female (punchdown) ends to ensure that colors are properly prepared.  I did a test of my jacks punchdown conductivity by testing 8 wires on the sides of the socket and the pins in gold on the inside where an ethernet cable connecting between the cut ends.  All wires are correctly leads to the appropriate pins.

  If I plug just the ATCBS into the switch next to him and using a good patch cable I see no change in the strength of the Wifi.  If I can plug my express (also moved to the room of the base station) using another cable good patch in the switch, wifi drops as described above.  If I plug the ATCBS on the new socket and the switch at the other end - no change in force wifi.  If I plug the express in its remote location system also uses the new ethernet cable installed for him and passing through the switch, I get the wifi signal reduction.  I get the same result if I take the express up to thevbasemenbt and plulg the switch with a connecting cable).  It seems therefore that the problem may not be with the newly installed cables that I get the same result by using or by using cables good patch, and with the switch in the same room with the ACTBS.  It doesn't matter how I'm trying to connect all the devices together, plug extender devices into the system brings the WiFi falling to almost nothing.

  Any ideas on what could happen?

  I'm having a problem by establishing a network of roaming.  When I plug my extender devices in ethernet cables through a switch to my Time Capsule base station, my wifi signal drops 150 + MBS next to the base station to < 10 mbs.

  That's what happens when you initially set up the device to the airport "extend" using a wireless signal... and then later connect an Ethernet cable to the unit of the airport.

  Since the airport is configured to connect wireless and waiting for a wireless connection, the Ethernet connection and then creates a feedback loop massive on the entire network... in fact, basically crashed the network.

  Basically, you have to start over again with the AEBS and AirPort Express and "Apple Installation Wizard" to set things upward. It's practically automatic. All you need to do is assign a device name to each airport and the wizard supports all the rest.

  After the back if you need some advice on how to correctly configure things.  You can be amazed at how simple, it comes... and surprised by the wizard settings apply.

• Mac Mail will constantly be disconnected with Time Capsule

  It has been ongoing for more than a year: I the time Capsule AC version (bought fall 2014) and uses a Macbook (version slim retina released in March 2015.) 12 "I am constantly the mailbox in offline mode in the Mail from Mac application.  The status bar displays "Error of account" and when I click on the error box, it gives the following message:

  DRAW THE ATTENTION OF

  There may be a problem with the mail server or the network.  Check the "iCloud" account settings or try again.

  The server returned the error: connection to the server "p15 - imap.mail.me.com" on default ports has expired.

  If I temporarily turn off Wifi and turn back on right, the error messages disappear and download new messages.  Everything works fine for a few hours, and then I start to see those! exclamation points! next to my mailbox.

  Initially I thought it was a problem with the Macbook.  They did a replacement under warranty of the wifi module into the Macbook.  Still the same problem.  So yesterday, I noticed that my iMac 27 "retina is sometimes as well.  And also, it is fixed temporarily by activating / disabling wifi on and outside.

  Interestingly, my business partner, who has the same version AC Time Capsule and retina macbook 12 "even I experienced the EXACT SAME SYMPTOMS in his house.  (Mailbox log in Mac app, remedied temporarily by activating / disabling wifi power).

  It's to drive us both crazy.

  Both have tried to remove the email accounts of our Macs and rebuild them.  Still the same problem.

  Is there a problem of connectivity between the time Capsule AC and some Mac computers?  I do NOT notice the problem when I'm connected to all other routers in other locations and mobile.

  If anyone has a thought on this, I would appreciate it a lot.  I am about to replace my Time Capsule with another brand of router in order to solve the problem, but all other routers are so ugly and I don't want some Darth Vader looking black thing with 8 antennas in my living room.

  I assume that you are running the latest OS to el capitan?

  The iMac is also updated for later?

  El Capo had e-mail problems... so I assume also that you have updated to the latest patch.

  Your experience with the laptop when you suggest that mobile are still correct... It is the TC at fault.

  There are known problems happening... not universal, which is a shame because then it would be imposed on Apple to fix... but it is not uncommon.

  I would recommend a reconfiguring of the TC... See the list below.

  I understand your network a little better.

  1. what modem do you have? Brand and model please.

  2. your ISP using IPv6 or spend now?

  3. is the work of TC as main router or bridge? (The answer might be inherent in the 1st quarter, but if it is a modem router I need the exact details).

  4. is the modem, also located in your living room... If you run ethernet instead of modem, a router could be installed right next to the modem... and the TC has changed to the bridge? It can work perfectly as a WAP right and for the TM backup when you remove its role in the delivery.

  Darth (breath in) Vader (exhale) Asus or Netgear router... which I suppose you don't not aesthetically... get to work extremely well.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels like this also seems to help stop school dropouts. (I recommend you do cela.. 2.4 ghz 11, 9, 5 GHz use 36 or 149)

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

  4. check that your share on the computer name does not change... (It was mostly from the Mavericks)

  Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

  5 attach the TC disc into the computer manually. (Expired for El Capo... just use Finder...) Connect the box below search)

  In Finder, go, connect to the server in the main menu,

  Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

  You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

  However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

  6. ensure that IPv6 is set to link-local only in the computer. (Depends on your ISP and if they moved to IPv6.. e.g. comcast).

  For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

  

  In the TC configured only IPv6 local link... assuming you're on IPv4 yet.

  

  It is very important with some ISPS like cox cable at this time.

  It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

  You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

  These changes could amount to little more... practical household good network... but I salute them as a starting point.

  It's going to ruin your Time Machine configuration... So if you change the TC its location in the network name must be passed to TM... so open TM preferences and put the backup to the new location. TM will then say that he will make a new backup... once he starts, he will find the TC and original backups... check it out... and then do another differential... so no problem. If you are prompted to you want to use the old and new locations of backup just say a new.

• problem backup Time capsule

  It has been 29 days since the last backup from time machine of my imac 27 "and the mac pro to my time capsule.

  When I select the disk to use for the backup, after the display of connection to the disk 5 or 10 minutes later a messeage "wa there a problem connecting to the server airport time capsule."

  Did you turn off all of the network and restart everything in the right order... modem to transport CANADA for computer... with 2 min between them?

  If you have already tried you must reset the TC factory and redo the installation... it sometimes get lost.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

  4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

  5 attach the TC disc into the computer manually.

  In Finder, go, connect to the server in the main menu,

  Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

  You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

  However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

  6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

  

  It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

  You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

  https://discussions.Apple.com/message/29202159?ac_cid=ha123456#29202159

  Let us know how you go.

  No luck there which modem you have... and what OS is on your computer.

  Most any other details on your network that could relate to the issue... for example... are you using wireless or ethernet... other computers use without problems. Do you have an update or change anything recently?

• Unstable WiFi with Time Capsule + Booster Express

  Hello.  Every night my wi - fi breaks down.  I called Comcast and they swear the internet connection works and routers are the problem. (Internet works with a wired connection).

  I have 2 routers: Airport Time Capsule 802.11ac with a Terminal Airport Express 802.11n (2nd generation) in the range extender.  Both are about 1.5 years old.

  In the evening, the lights flash yellow and they go in and out.  AirPort Utility often shows messages yellow triangle error.  I can unplug and restart them and often the wi - fi goes back only to go down again later.  In this case all evening.  Increases the frequency and duration of the outage.

  If it is in fact a router problem, suggestions on how to solve the problems?

  Thank you very much!

  What is the make & model of the Comcast Internet modem brings you your Time Capsule (TC) connected to via Ethernet? Where is the Terminal AirPort situated Express regarding the TC? Same room, another room or different floor? Are they connected by wire or wireless?

• Adding redundancy backup with time Capsules

  Are there problems associated with adding a second time Capsule to my system in order to add additional redundancy and safety of my backup options? I have a MacBook Pro and a single Capsule of 3 TB. I am looking for a non-Cloud option add extra security while maintaining the automation of the OSX TimeMachine.

  Adding a second Time Capsule works perfectly.  After that Time Machine performs a full backup of your Mac (s) on the new Time Capsule, it automatically alternates between two time Capsules backups.

  If you have the possibility of adding a USB or FireWire drive directly to your Mac, which would be a bit better set up in terms of reliability of time Machine, but probably not very convenient if you have a laptop that is moving all the time.

• Can I start again with time capsule 2 TB existing using an existing iMac and a new iMac.

  Trying to understand several iMacs and Time Capsule.  Can I save a 2 iMacs on my Time Capsule?  I am running AutoCAD LT 1015 on my new iMac, so far, I've not put back up on my Time Capsule.  I'm worried it might be a problem with the existing backup tutorial AutoCAD on the Time Capsule, interfering with the new version purchased.  Therefore, I wonder if I can remove the Time Capsule saved since the original iMac info and start back up both machines it again?

  I wonder if I can remove the Time Capsule saved since the original iMac info and start back up both machines it again?

  Yes you can. The way simplest and quickest way to accomplish what you want is clear the Time Capsule disk and then start over again with a new backup of a Mac. Then, once it's over, make a new backup of the other Mac.

  When the two Macs have saved for the first time, then both will continue back up automatically and gradually.

• Impossible to extend the existing wi - fi with time capsule airport

  Hello

  I have one Capsule of airport TB 2 hung on an Ethernet in my study (lower level).

  I already have an existing wi - fi network to ISP modem/router to my media box provided at the top level.

  In addition, I have an Extender provided by the ISP of lower level.

  I would try to expand the scope of the wi - fi with my time capsule without creating an additional network.

  I tried several times to do so, but either it freezes up or creates its own network despite the

  mode bridge as stated in Airport utility.

  Guide gently with the method or Protocol correct to put that in place.

  Thank you

  Jay

  I would try to expand the scope of the wi - fi with my time capsule without creating an additional network.

  It sounds like you may try to extend the network of your "main" router wireless

  The time Capsule will not be able to extend wireless network if your 'main' router is also an Apple AirPort base station.  Or... in other words if your 'main' router is not an Apple product, then the time Capsule will not be able to extend wireless network.

  So, the first question to ask here would be... What is the number of brand and model of your router "main"?

  If you intend to leave the time Capsule connected to your main router with an Ethernet connection, the Capsule must have the maximum value of "create a wireless network.  If you use the same wireless network name and password using your 'main' router, Time Capsule will provide additional wireless coverage in the area where it is located.

• Problems of Time capsule

  We recently bought a time Capsule 3 TB airport as well as a new iPad Pro.  I put it in place and working well.  We had gone for a few days and when we returned, we found that our devices (iPad Pro and MacBook Pro) link is no longer on the internet.  Our iPhone 5 s are still able to connect...

  This is not unusual.

  This modem do you have? Make and model please?

  Who is your ISP?

  Is the TC in bridge mode or router (if your modem is also a gateway router)?

  Did you take the MBP and iPad with you and link them to other networks while you were there?

  Seems that something strange can happen if you connect to several different wireless networks.

• Time Machine does not work with Time Capsule, after update of Yosemite to iMac 2011

  My Time Capsule features all work except when trying to access files with Time Machine. It is new and can be linked to an update in Yosemite. Tried rebooting both without success.

  You can mount the drive of TC in the finder?

  The old backup Time Machine may be usable via a direct opening so the sparsebundle to give it a try.

  If not, do you want to achieve... you want to migrate your files? Have you tried the migration assistant?