Problems with Win 7 Professional 64-bit Microsoft wireless keyboard

Similar Questions

• Dual monitor boot problem with Windows 7 Professional 64 bit after installation of any graphics program like a game.

  I have built this platform with the help of the owner of a store of 4 cumputer teir 2 years ago. We initially put Windows Vista 32 bit on the system to Vista 64 bit unstable atm. For 2 years, the computer worked like a dream. Last week I made a clean wipe of windows vista and windows 7 professional 64-bit installed. The system has two monitors. The primary monitor is a sony bravia with 26 "led and secondary for watching movies is that a 55 '' led Samsung 1080 p 240 Hz. The graphics card is a geforce GTX 295 nividia. It has 12 GB of Ram and the CPU is an i7 965 @3.20.

  The problem I have is this. After the installation of any game average to work with windows 7, the screens to reset their resolutions automatically more than a few times as they are confused. Sometimes, I have to return the screen to its correct resolution after installation in full. Most of the games and then run fine. After installing the game or any game designed for win 7 startup of computers is all messed up for the monitors. After starting hand 26 "sets its resolution and then after about a second 30 pause the computer makes the sound (the double) that it is resolutuons to reset monitor again? After that this second reset about 1-2 minutes the computer is good to go, unless it sets the res evil. The problem is the computer has never done that with vista and it is very annoying say the least. It still freezes the installation of some games. The only way to resolve what I found is the restoration of the system. The computer starts normally and screen ground is defined once she has always been. The only problem is when you install another game, the problem is their new. This problem is worse in some games.

  The latest nvidia drivers have been installed. There is no conflict in the device with the exception of an old printer Manager. The two comes is set to 60 hertz. I searched all over the internet and there seems to be a problem with windows 7 without solution. I am at a loss. Any other information that you need let me know and I'll post it. Thank you!

  Hi ancientone618,

  It sounds almost as if there is a Windows update that is in conflict with your NVIDIA Driver Installer.  I would say to disable automatic updates of Windows to see if it might help:

  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  In addition, please see the article with some useful information:

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• problem with win 7 and 8 of 32-bit

  Mr President, I have a PC with win 8 running. It has 4 GB of ram and processor Intel dg41cn. I installed win 8 after watching win 7 ultimate crash suddenly and lose the whole unsaved data. I thought it was a problem with win 7. but the same problem occurs with win 8 pro 32-bit. now a new problem 8 victory also blocks the same way and when we start it shows 'no operating system found... "but when we shake the cables attached to cpu it starts... now what conclusion do this? What can I do to fix this

  Hardware problems, shorts and/or bad connectors...

  Solution is to repair/replace the material once the short exact question / connector is located.

• Application of Beats Audio HP Envy 4-1150br for Win 7 Professional 64 bit

  Hello.

  I need the Application of Beats Audio HP Envy 4-1150br for Win 7 Professional 64 bit. I migrated to win 8 to Win7. With win 8 it was working perfectly. However, after migrating to Win7, there is no driver or request for Audio Beats in HP's Support page.

  My Info is:

  Product name: HP ENVY 4 Notebook PC

  Product number: C1C41LA #AC4

  Windows 7 Professional 64-bit Service Pack 1

  Could you help me?

  Thank you in advance.

  Jose.

  Hello

  Please try:

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56900.exe

  and for OSD:

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55152.exe

  Kind regards.

• Problems with Win 7: lost internet connection and downloads

  Hello

  I'm not sure that the two problems are related... I don't know what topic to choose.

  I have a custom, with Win 7 machine, and I install all required updates. But for a while (months? I turn it off every night) it says 15 updates are available every time that I reboot, and I see no updates installed (I search for installed updates today).

  Anyway, let them go all the way, and when I restart, I have no connection. It's happened several times (everytime I reboot). Maybe that I had the chance to solve the problem by restarting (and reinstalling :)) 15 updates, but today I can't. I am connected by wire to a modem. Our all other computers work.

  I have a job in the process and need my internet connection (easier to work on a desktop computer with large screen of a laptop) and I can't.

  In network and sharing Center, there is a cross between 'Several networks' and the internet. I have the message if I 'connect or disconnect' "no Internet access.

  I did ipconfig, and I get media disconnected. I did not unplug anything!

  I would be very grateful for your help.

  Thank you very much

  Hi Allwyna,

  Thanks for the reply.

  As you said, there are 16 updates that never completed the installation. There could be opportunities updates are at the origin of the problem. So before solve us the connection problem. We should go ahead and first to solve the problem of updates.

  I would like to know you have installed any Security Antivirus software on your computer, if so I first suggest you temporarily disable the Antivirus software install on your computer and check if that helps.

  Warning: Antivirus software helps protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you have to temporarily disable it to install other software and/or any relevant issue, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks by malicious software.

  Try the methods.

  Method 1:

  I suggest following the steps listed in the article and check if it works.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

  Method 2:

  I suggest you to manually reset windows update components.

  http://support.Microsoft.com/en-us/KB/971058

  NOTE: This section, method, or task contains steps that tells you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  I hope this helps. Please let us know the results. We will be happy to help you further.

   

• I have a Toshiba laptop with Windows 7 Professional 64 bit installed and would like to change to Windows 7 32 bit. How can I do this?

  I have a Toshiba laptop with Windows 7 Professional 64 bit installed and would like to change to Windows 7 32 bit.  How can I do this?

  Original title: Harold

  Usually this is impossible on computers with Windows 7.  In almost all cases, you need to go to the store, buy Windows 7 32-bit and use the CD to install it on your computer.  This also requires the deletion of your system, you will need to reinstall all your programs and settings.

• printer hp photosmart 7345 has not run with Windows 7 Professional 64 bit

  Our range of printers hp photosmart 7345 has work perfectly with Windows XP Professional 32-bit, but he has not run with Windows 7 Professional 64 bit. Please could you tell us who should be used?

  Hello

  HP Photosmart 7345 is compatible with Windows 7.

  Download the drivers for your printer from the below mentioned link and check if it helps.

  http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=213999&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=213997

  
  Contact HP support for further assistance.
  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

• Have Photoshop Elements since 2001.  A new computer with Windows 7 Professional 64 bit.  It does work on my new computer.  Which version is MORE SIMILAR to the old version that I have, which will take place on W7P - 64?  Thanks for any help.  Popjer

  Have Photoshop Elements since 2001.  A new computer with Windows 7 Professional 64 bit.  It does work on my new computer.  Which version is MORE SIMILAR to the old version that I have, which will take place on W7P - 64?  Thanks for any help.  Popjer

  You should probably just download the demo version of the EP 12 and see if you can live with it.

  Download a free trial version or buy Adobe products | Adobe Downloads

  That being said, you tried to install PES 1 on your computer?

  How much free space is on your hard drive?

  You have Internet Explorer 10 or 11?

  PSE 1 can run on windows 7 x 64, if certain conditions are met.

• Problems with Adobe Flash Professional CC (CS6 too) to save the animated .gif file or .swf file perfect

  Hello

  I have a problem with Adobe Flash Professional CC and CS6 to save the animated .gif file. This is a very simple work with logo. But I can't save a perfect swf or gif file, and that's bad news for me. Logo .swf file record with bugs. Bugs just see then file to insert in the page of freeshop. This is just example of test page, it allow you to see the bugs of logo - http://tagraseshop.graphicsrim.eu . Here is the actual page, but it's not my, freeshop with old logo is and I corect it - http://www.tagras.lt

  .Gif absoluted anime file not saved in Flash CC. Just the gif image. And why? My Windows 8.1 operating system.  In fact, I try to register on Adobe Flash Professional CS6. It is not save too...

  GIF "animation"- https://mega.co.nz/#! D8pEVaRR! LK4 ahNfhg-nI4T-0vROV9xCa1XfXz4br1X9lpQfUR0nQNT
  SWF with bugs- https://mega.co.nz/#! jo5lSRyS! 1x6GjWqYsf7n4KknUs6eF8EqZXEv9e8RsSpGd8h5 jGQ

  FLA -flash document- https://mega.co.nz/#! C94nCDSS! 7yKF9FIBvYtVC9r8kYiJ0l0xzUm_R2HwgoXks6iM zUA

  Perfect animation speed is here- http://e-shoptagras.graphicsrim.EU

  Who can help me?

  Any ideas?

  Thanks for your help in advance!

  But when I download the SWF logo in the page http://www.tagras.lt, it is always visible with bug, flash on it. I don't create it like this, why it is done that way? (Why SWF logo flashing/load?) ( http://www.tagras.lt look at the main title on the left).

  Thank you very much!

• Problem with the Microsoft wireless keyboard.

  G ' Day in the community.

  I have a new Microsoft wireless keyboard with lots of keys that I do not use Windows 8.1.

  Is it possible for me a key or keys to print/type a sentence like my email address so that I don't have a program

  the key it whenever this is necessary?

  I'm sorry that I don't have, I don't use such programs.  I can tell you that AHK is safe, many experts and pros, including those from Microsoft to use it.  I don't know why Norton he scored. He could score all the EXE.

  G ' Day Shawn,.

  I tried to re-download AHK and have borne fruit.  (Could be from another site)

  It is now current OK but I can't make a simple impression of my e-mail address. The program seems to be made for the work of very complex program.

  You can refer me to someone who may be able to help me. I think I'm very close.

  Thanks Brian

• When I scroll with the wheel of the mouse Microsoft Wireless Mobile Mouse, it jumps instead of sliding to the bottom of the page. It ignores even the large amounts. This can be solved? Rose

  When I scroll with the wheel of the mouse Microsoft Wireless Mobile Mouse, it jumps instead of sliding to the bottom of the page.  It ignores even the large amounts.  This can be solved? Rose

  Hi Rose,
   
  The problem occurs on specific applications?
   
  This can be for one of the following reasons:
  1. bad mouse is selected in the IntelliPoint software.
  2. conflict with other mouse or pointer (non-Microsoft) software.
  3. problem with IntelliPoint software or drivers.
  4 application does not correctly recognize scrolling the mouse messages.
   
  I suggest for the link and follow the steps in the KB article:
  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091
  Note: Put the computer to normal mode after the troubleshooting in clean boot mode.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• problem with the 3/square icon on my iMac keyboard key.

  I have a problem with the 3/square icon on my iMac keyboard key. The icon of Fund will not work, I just get # when I use the up and down arrow to the left of the keyboard. A lot of ideas, everyone please?

  I just see the same question and the answer is the book symbol is alt + 3, I have a US keyboard. I wonder why that is? I bought my iMac to John lewis to the United Kingdom. Anyone have the answer for me please?

• Microsoft Wireless Keyboard and Mouse 2000

  The transmitter/receiver (Microsoft 2.4 GHz V 7.0, model 1423) this above mentioned product has got damaged and I cannot locate the customer for her service. The one you suggest the right steps?

  Hi David,

  For assistance with Microsoft wireless keyboard and mouse 2000, you can contact the materiel support team referring to the content in the link.

  Wireless Desktop 2000:

  http://www.Microsoft.com/hardware/en-us/p/Wireless-Desktop-2000#support

  Support:

  http://www.Microsoft.com/hardware/en-us/support/contact-us

• Microsoft wireless keyboard will not type the letter 'c' or type the number "3".

  My wireless keyboard will not let me type the let type me the letter 'c' or type the number "3". This works sometimes! Help please!

  This is a Microsoft wireless keyboard 3000 v2.0. It came with a mouse aswell which is working as expected.

  Any ideas? It's so frustrating!

  If you can, try the keyboard on another PC and try a different keyboard on your PC. If the keyboard has the same thing on another PC and another keyboard works well on your PC, it is "side on" hardware failure. Assuming that it is hardware failure, if it is under warranty GET it replaced, it is not you will have to buy a new one.

  Please mark this as useful or response if applicable.

  Tricky

• Microsoft Wireless Keyboard 1.1 configure Windows 7

  Hello

  I have the Microsoft Wireless Keyboard 1.1 and Windows 7. At the top of the keyboard, there my documents, my pictures, my music ect. buttons.  These do not work when I press them.  How to connect to my folders on my computer?

  Thank you

  Hello

  ·        What is the model number of the keyboard Microsoft do you use?

  ·        It was working fine with Windows 7 earlier?

  If this isn't the case, you may download the latest version of the software for the keyboard and check if all the keys work fine.

  Follow the link below, fill in the appropriate information and download the software.

  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.