ProBook 6450 b: helmet not detected... ?

Similar Questions

• ProBook 4720 s does not detect the SD card inserted

  I get no response when a SD card snaps, but 8 GB Transcend card is recognized very well of my little netbook from Toshiba.

  This is the first time I tried a card in this HP, although I got it a few months. Running Win 7 Pro 32-bit.  BIOS HP 68AZZ worm F.0F 18/02/2011.

  Well, I contacted HP support and got a helpful response within a day. Siva gave me urls for two drivers that I apparently needed (not very new drivers and I don't know why they were not there in this new machine, but any way..) and they installed, unlike the one I found just for me and giving a message "forbidden". However, once installed, both raised the box "this program cannot be installed correctly" (that I've seen before and never known what to do about it except devoted to work and hope for the best).

  With the drivers installed, the system * fact * detect the SD card so that it has shown in Device Manager and gave sound signals when it has been installed and removed. But he does not have assigned a drive letter and did not show in Windows Explorer, while it was still incommunicado or to serve as a ReadyBoost file storage.

  Thinking that it seemed that HP problems were over and it is now a Windows problem, I spent a few hours to make the seemingly useless things in Windows, all having to do with recovery of AutoRun, which is not.

  Now the SHIFT key while inserting the SD card could start AutoRun. Also, I gave the command 'net start shellhwdetection' and told me that the service was already running. And AutoFix.exe from Microsoft verified that the shell hardware detection service was on and the autostart value. But to step next, as the wizard repair didn't see that other readers, not the SD card, so I couldn't specify only * that * drive AutoPlay wasn't working on, and which ends the program.

  Support software MS said that if ReadyBoost enabled and there (and it was) and still does not work there because some services he needed had been extinguished. So I Dove to the various lists and tried to turn on anything that seemed relevant and which has not already lit.  Nothing seemed to still accept my changes. Very frustrating. But then I went back to where I had left access control panel in Explorer, and I saw that the SD card has sometime been recognized and awarded drive E. Shazam!

  Therefore, all followed the script and I could bring up the window of the tab (in the properties of the drive E) option for ReadyBoost and say, go ahead. He did, and it seems to work very well. It closes fast when I close the lid, with several major programs running, as well as 4 windows in FF with about 12-24 tablets of each, and it took only 60 seconds to wake up this morning.

  So the problem is solved with something good help at HP, but not gracefully or usefully for others, I'm afraid, because I can't say yet exactly what I did.

• HP Probook 450 G1: Windows 8 HP recovery disks has not detected

  Hello

  In the hope of someone can help me. I recently had a problem due to what I have to perform a recovery using HP RECOVERY discs [I ordered it] I don't have the HP Recovery Manager or the recovery of microsoft. So I have to do only through HP recovery disks.

  If his sudden has not detected in my laptop. I hit the bottom of the hard drive, I can feel that it is rotating. When I double clicked on it. It appears that I have to insert the disc. [Although I have inserted]. I wiped also DVDs with a cloth dry go with stripes. I tested on my PC it detected [of course it won't work because it is not HP PC].

  I also diagonsised the hard drive [wide test] component, it has demonstrated that it meets the test. I tested both with other CD/DVD games. It works very well.

  I hope you got my problem.

  Product number: F6B14PA #ACJ

  Thank you

  Hello

  Thanks for posting in the HP Support forum.

  Please correct me if I'm wrong, but from your description, I understand that the HP Probook 450 G1 does not detect the recovery DVDs. However, the other CDs/DVDs work fine and the recovery (at least detected) on another PC media.

  I understand that you need to recover, but despite this, Windows starts correctly now? What is the problem you can get you to try to recover? In Winows, recovery disks are recognized?

  To be honest, I don't know why it is not detected, but there are some things you can try:

  -Boot in the BIOS and disable secure boot + turn on Legacy mode

  Details > > http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/The-selected-boot-device-failed-Press-enter-to-continue/m-p/5730515

  Details > > http://support.hp.com/us-en/document/c03653226

  -Try to boot from the media of recovery of the DVD (first is the one that is re. OS - I see, you should have 2 recovery DVDs - one for the OS, one for the drivers).

  keep hitting the Esc key (such as tap-tap-tap).

  This should open a HP Boot Menu. Choose F9 to open the boot options. Select the USB drive as boot option.

  I would like to know if it works for you.

• ProBook 4510 s: DVDRAM Drive detects is not audio CD

  Drive DVDRAM GT20L in my Probook 4510 s does not detect audio CD or CD of the software, but it does not seem to run OK for DVD video.

  I tried the Microsoft Fixit tool, which says there is a problem, but he can fix it.

  II have checked the registry for upper & lower filters, but there is no entry filter in HKEY_LOCAL_MACHINE\SYSTEM\CurrenControlSet\Control\Class\ (4D36E965-E325-11CE-BFC1-08002BE10318.

  I tried to create a registry subkey.

  All of the above is as stated in the support.microsoft.com/kb/314060/en-us.

  I uninstalled the driver, removed the drive, rehabilitated the road and allowed the automatic detection and installation of the drive, to anything will do.

  I have tried of course, update driver, but every time the system says that the best driver is already installed.

  

  Do you have suggestions for other possible patches that I can try?

  Thank you

  It's a hardware problem. The player has several lasers for multiple functions and it is quite possible for the function of CD to stop working and the DVD function fine. The only solution is a replacement player. This is a sale on eBay:

  http://www.eBay.com/ITM/HP-ProBook-4510s-4515s-4520s-4525s-4530s-DVD-burner-writer-CD-R-ROM-player-drive-/151116553242?PT=LH_DefaultDomain_0&hash=item232f3f9c1a

  This video shows how to get inside and do the replacement. As says the announcement you have to switch the facades of the old drive. If you need more help post back.

  https://www.YouTube.com/watch?v=CJ5ZPHiyvEA

  It's a lot more you need to do. After removing the keyboard, you can remove a screw in the DVD drive, and then drag it on.

  Repair manuals

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• card not detected wireless network

  My HP ProBook 4520 s does not detect the wireless network card. Even after installing the drivers, I get the following message...

  There are currently no available and enabled wireless adapters.

  Please activate the available adapters wireless before accessing this configuration utility.

  Please help me with this.

  Hello

  It seems ONE thing missing: Atheros 802.11b/g/n wireless card

  Please use it to install and after return the result:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-95105-1&mode=4&IDX=2&prodTypeId=12454&prodSeriesId=316720

  Concerning

• HP Probook 430 G2: HP Probook 430 G2 - HW Bluetooth not detected on Device Manager

  Hello team HP,

  I just bought HP Probook 430 G2 and using the Windows 7 Entriprise 64-bit SP1 operating system.

  Why bluetooth HW is not detected in Device Manager, I know that this laptop has built-in bluetooth.

  

  Please kindly help.

  Thank you

  You are the very welcome.

  You are right.  This wireless card has built in bluetooth.

  See if this driver installation get the bluetooth to work.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_149791_1

  If this is not the case, check the BIOS to see if there is a setting to turn bluetooth on or off.

  If this isn't the case, install it and see if it detects the bluetooth radio and turn it on using the software.

  Once you turn on the BT, you can either go to the use of the software or uninstall.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_154636_1

  If none of the works above, I suggest that you contact HP technical support and submit a case under the guarantee pension, because I think that there is something wrong with the wireless card.

• Logitech bluetooth headset is not detected by HP probook 4530 s

  Original title: how to pair the headset wireless for hp probook 4530 s

  I am trying to pair a bluetooth wireless logitech headset to my hp probook 4530 s, but my computer does not detect it.

  What should I do?

  Hello

  Thanks for the question of validation in Microsoft answers community!

  I imagine the frustration you feel when you are unable to use the Bluetooth wireless headset.

  The problem may be with the Bluetooth adapter or with the device itself.

  1. have you checked the device to another computer?

  2. What is the model of the unit?

  3 are you sure you've done the discoverabledevice?

  How to make a discoverable Bluetooth device varies with the devices. If you are unable to find how to make it discoverable, contact the manufacturer.

  I suggest you follow the steps mentioned below:

  Method 1:

   

  Check the settings to make sure that this computer can detect the Bluetooth device.

  a. open the Control Panel by clicking the Start button, then Control Panel

  b. in the search panel box command, type Bluetooth, and then click Change Bluetooth settings

  (c) in the Bluetooth settings dialog box, click the Options tab

  d. to make your computer discoverable to Bluetooth devices, select the check box for allow Bluetooth devices to find this computer.

  e. to allow Bluetooth devices to connect to your computer, select the check box for allow Bluetooth devices to connect to this computer.

  Method 2:

  Run the fixit:

  Bluetooth devices do not work correctly on a computer that is running Windows 7

  http://support.Microsoft.com/kb/980396

  Method 3: Run the hardware troubleshooter

   

  See the site:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  If the problem persists, I suggest you to contact the manufacturer.

  You can also consult the site:

  Add a Bluetooth device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  I hope this helps. If you need further assistance, let know us and we would be happy to help you.

• HP Probook 4530 s: my HP ProBook 4530 s Core i3 17.3 "does not detect the battery...

  Hello everyone,

  This problem happened to me only four or five months and recently I bought a new battery and even this new one doesn't detect the laptop and I don't know what else to do. I uninstall the Microsoft ACPI compatible with battery control method and restart the laptop, but nothing has come at this time there, the battery still is not detected. If you can help me with this problem I will appreciate it.

  Kind regards

  JP.

  Hello JoPerez:

  GoTo this page: http://h20565.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5060881&swLangOid=8&swEnvOid=4058 there once Utility Tool page goto. Expand it and third a low install Battery Check (Intetnational). This wil let us know if it is software issues by reinstalling the software will write more corrupt software. You have a new battery which destroys a dead battery. Now you have reinstalled the software for this. If it still does not work. Then you know that it is a matter of internal material. That your computer needs minor repairs done on the subject. Could be a burnt wire or wire connection loose a computer repair man would know. Don't let not a Direct HP support because their services are vary bad and very expensive. Trust in me as my computers always returned in a worse state, and then they went to. Six times my HP Touchsmart 600-1050 went in back to back repairs. Seventh time I took my repairman of local computer and bought a good one used to repair damage caused by a Direct HP support and rebuild the computer so I could have a good computer for work.  An estimate in the front when you take it for repairs. If you bought at best buy do not take it for them because they will ship it back to HP Support live also so you end up paying double amount.  You're welcome frrw.

• [ProBook 6450 b] 104-no supported Intel Advanced - N 6200 wireless network

  Hello

  I have a ProBook 6450 b with the latest bios (F23) and remove the Broadcom wireless network and replace it with a new l an Advanced - N 6200 (support 300Mbps) and 5 GHz Intel.

  Before I buy this wireless, I downloaded the manual and this wireless network is supported.

  http://h18000.www1.HP.com/products/QuickSpecs/13616_ca/13616_ca.PDF

  Page - 35

  but when turn on the laptop, after the hp logo, I see:

  "104 - unsupported wireless network device detected system interrupted - remove the instrument and reboot.

   

  
  I try another device (Intel Wifi Link 1000) and this device work!

  Please hellp

  This is your problem then.

  Here is the link to the service manual for your laptop:

  http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c03122685/c03122685.PDF

  The list of wireless cards supported with HP part numbers can be found in Chapter 3, beginning on page 44.

  You must get the module WLAN Intel Centrino Advanced-N6200 802.11 a/b/g/n 2 x 2 with HP part #.

  572509 001.

  Again, you can buy only a wireless card listed in the service manual for your laptop and it must have the part number HP on it or it won't work.

  You can order directly from HP on the link below. You can change your country at the top of the page.

  http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=F13BE835ABCA4E7C851B4DB0F4C74AFC

  Or you might be able to get a card on eBay by searching by part number. Are not looking for the model number that you can end up with a card no HP.

  Paul

• Headphones not detected if connected at startup

  MACBOOK PRO (RETINA, 15 INCHES, MIDDLE OF THE YEAR 2015)

  Windows 10 home

  If my headphones are already connected when I boot on Windows 10, they are not detected as plugged and so the sound comes out of my speakers Apple Studio Display (not working not properly - the helmet should be detectable that plugged).  If I remove the headphone jack and taken in again once, the headphones are correctly detected that plugged and the audio goes through them instead of Studio display.

  How can I fix this problem so that the headset connected at startup is detected correctly?

  If you remove the headphones and before plugging back them in, can check if you can see a small red light in the audio jack?

• ProBook 6450 b: problems with drivers

  Hello guys,.

  Hopefully someone can shine a light on the problems I encounter. I have a ProBook 6450 b with Windows XP installed on it.

  I have problems with some drivers. The pc does not recognize any usb device I connect, it is it does not install them. Here is a list of driver problems;

  Base system device

  PCI VEN_1180 & DEV_E230 & SUBSYS_146D103C & REV_01
  PCI VEN_1180 & DEV_E230 & SUBSYS_146D103C
  PCI VEN_1180 & DEV_E230 & CC_088000
  PCI VEN_1180 & DEV_E230 & CC_0880

  Base system device

  PCI VEN_1180 & DEV_E852 & SUBSYS_146D103C & REV_01
  PCI VEN_1180 & DEV_E852 & SUBSYS_146D103C
  PCI VEN_1180 & DEV_E852 & CC_088000
  PCI VEN_1180 & DEV_E852 & CC_0880
  

  Modem on Bus High Definition Audio device

  HDAUDIO\FUNC_02 & VEN_11C1 & DEV_1040 & SUBSYS_103C3066 & REV_1002
  HDAUDIO\FUNC_02 & VEN_11C1 & DEV_1040 & SUBSYS_103C3066

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_146D103C & REV_06
  PCI\VEN_8086 & DEV_3B64 & SUBSYS_146D103C
  PCI\VEN_8086 & DEV_3B64 & CC_078000
  PCI\VEN_8086 & DEV_3B64 & CC_0780

  * Unknown Device

  ACPI\HPQ0004
  * HPQ0004

  * Unknown Device

  ACPI\IFX0102
  * IFX0102

  * USB device

  Rev_0072 & USB\Vid_138a & Pid_0007
  USB\Vid_138a & Pid_0007

  Hope someone can give a sense that (?)

  Thanks in advance!

  Hello:

  Here are the links of driver in the order that you posted the ID:

  The first driver will install both the device base system (card reader).

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4173766&swItemId=ob_79991_1&swEnvOid=1093

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4173766&swItemId=ob_82944_2&swEnvOid=1093

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4173766&swItemId=ob_118167_1&swEnvOid=1093

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4173766&swItemId=ob_104280_2&swEnvOid=1093

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4173766&swItemId=ob_78959_3&swEnvOid=1093

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4173766&swItemId=ob_134806_1&swEnvOid=1093

• HP Wireless Assistant for Windows 8 (upgrade of Windows 7) (HP Probook 6450 b)

  Computer laptop HP ProBook 6450 b basic model

  Purchased in September 2011.

  Just yesterday upgraded to Windows 8. Was a child, all game worked initially. During the restart, I disabled the wireless since installation of Windows Defender wasnot.

  Then I realized, I can't turn on wireless. The button is just disabled.

  Can only be connected on the local network.

  Search on the web revealed HP Wireless Assistant be the culprit. This should be removed before the upgrade in Win 7.

  It is now too late.  Does anyone have a resolution for this one?

  Thank you

  RG

  I read in another post that changing the default BIOS settings should do the trick.

  That seems to work:

  -Stop the laptop

  -Remove the power cable & battery

  -Press the on switch for 30 seconds

  -Power home

  -Laptop power and press F10

  -Enter the BIOS and set the changes to default

  That seemed to work.

  Of course, restarting do not work and that is easy to fix (driven from power!).

  Thank you all for the advice.

  PS:

  Bought a mac & this laptop from h - p in 2011. Mac went through 2 operating system upgrades (cost $20) and "0"... questions

  Windows 7 to Windows 8 for $40 to upgrade and crazy questions...

• ProBook 6450 b (ATI): the upgrade of my Probook with mSATA SSD

  Hello! ProBook 6450 b. I want to upgrade my computer with mSATA SSD drive. I've got slot free mini-PCIE (what is expected for the WWAN card). The problem is that I don't know if this Probook (updated of course!) BIOS supports modyfications like this. Can anyone help?

  Kind regards!

  I happen to be sitting here with his cousin the 6530 b working on it for a friend and I can tell you that it is earlier than mSATA WSSD readers. The crack is only for a WWAN card. If you put a disc mSATA in it the computer does not respond.

• Audio input Inspiron 15 3000 can not detect the headset

  Audio input Inspiron 15 3000 can not detect the headset, but audio dell can detect something trendy. However, the playback sound device cannot detect any helmet. Now I only get gurgling in the helmet. How to solve this problem?

  Hello. To test the headphone switch the native Windows audio driver Realtek audio driver.

  1. open Device Manager (type devmgmt.msc in the box of Windows search).
  2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
  3 Select this option to "Update driver software".
  4. click on "Browse my computer for driver software".
  5. click on "Let Me pick from a list of drivers on my computer".
  6. put the "Show compatible hardware" check box if not already checked.
  7. in the list of devices, click on 'High Definition Audio"(native driver).
  8. click on "next".
  9. in the update driver warning box, click 'Yes' (the driver).
  10 restart the portable computer if you are prompted. If not invited, so no need to restart.
  [To return to the Realtek driver, do it again but reverse the names in steps 1-6.]

  If it is still bubbling even with the native driver, test by using other headphones. If still no luck then probably hardware failure. Contact technical support for warranty repair.

  If it works fine with the native driver, then the Realtek driver is buggy. Try a different version of the driver. If you need help with this answer comes back with the full model name (something like "Inspiron 11 3147", etc.) and which operating system there.

• Line-In does not detect audio microphone?

  I recently got a new headset, Razer Pro Kraken, and the line does not detect my microphone, I need because I use Skype. I checked and there the audio turned up completely, and I know for sure that the plugs are correct. What should I do to fix this? I am on Windows 7, if it helps.

  And also - I can hear the audio, the microphone right pick up. And I know that he is not a defective product, because I had this problem with previous helmets in the past.

  Hello. Your laptop is an Alienware M14x? Have you tried to reinstall the Realtek audio driver?

  Reinstalling the audio driver will restore the default audio settings. On many models by default is for line-in (off mic amp) then you may need to select again for a microphone and set the mic boost levels.

  I would check the settings both on the recording of the sound Properties tab (right-click on the audio icon and click recording devices, right-click on the microphone and set as the default, right-click the microphone, and then click Properties device, then the levels tab to set the push) and also the microphone of the Realtek Audio Manager tab. I would test the microphone using Windows Sound Recorder instead of Skype.