ProBook 4510 s: DVDRAM Drive detects is not audio CD

Similar Questions

• HP Probook 4510 s: no bluetooth device was detected

  Hello. I have not used bluetooth in a few years. Now when I tried to pair device with my phone I just realized that I have not instaled bluettoth. Tried to install a driver, but that is the message that appears on "no bluetooth device was detected. Please make sure that your bluetooth device is connected correctly in order to continue the instalation.

  I have windows 7, 32-bit operating system. And I use HP Probook 4510 s. thanks

  Have you installed the HP bluetooth driver?

  It would be the only suggestion I can offer.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_81348_2

• HP ProBook s 4540: How can I tell if my laptop has all the spare HARD drive bay or not?

  How can I tell if my laptop has all the spare HARD drive bay or not? I want to use an SSD, but also my HARD drive as secondary.

  @ShohagDr

  This model has only one.

  Your maintenance and Service Guide here.

  http://www.HP.com/CTG/manual/c03758231.PDF

  Laptop HP ProBook s 4540 - videos to remove/replace

  http://h20464.www2.HP.com/results.htm?SID=5229455&MEID=0B16F6F9-A9BB-4275-8FB4-57CCA3816318

  REO

• The Delete box is not upward trying to remove Driver Detective in the list of programs

  When you try to remove Driver Detective, who downloaded by mistake, using the Control Panel Add/Remove utility if poster change button, not the button Delete. How can I delete/remove the system? I'm on Windows XP Professional with service pack 3 and have ESET as my anti-virus software.

  Detailed instructions with screenshots to uninstall Driver Detective

• Downloaded Driver Detective, how to uninstall? Uninstall will not remove this program. __

  Downloaded Driver Detective, how to uninstall?  Uninstall will not remove this program.

  Hello

  You may have to reinstall - it does not matter if it works.

  Then use Revo to uninstall:

  Revo Uninstaller
  http://www.revouninstaller.com/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• CD DVD burn CDROM DVDROM BD Blu - ray - disc disc in drive [E:] is not detected or supported

  the disk in drive [E:] is not detected, or supported... running Windows 7. I'm lost, so that everything has been updated. Need pc - 101

  ALL disks are recognized?  Try several from different sources, for example those that you yourself, burned movies DVD commercial and retail of CD of software.  If nothing is found, it is probably time to replace the disc, the laser could be dead.  You can try a CD/DVD cleaning kit before changing the disk if you wish, it can be useful.

• External hard drive detects but does not open without formatting

  I can't open my external hard drive. In computer science, it shows just K of disk space, but there is no reading of storage. It says 0 bytes of free space and used as 0 bytes space as it will not be open until I have format. Any kind of help, please let me know. Its a backup disk that have been most hard, though don't know if its of any help.

  Hi Deborah,

   

  I imagine the inconvenience that you are experiencing right now. I will help you on that.

  Formatting a disk means configuring the disk with a file system so that Windows can store information in there. Usually, when you install a new hard disk on your computer, it must be formatted with a file system, such as NTFS, Windows can store files that it contains.

   

  Please answer the following questions so that we can better help you.

  1 - is the specific problems of a hard drive?

  2. is it the problem persists when you use different USB ports on the same computer? If 'yes' then tick the question in another computer and let know us the results.

  3. don't you make changes to the computer before the show?

  I suggest to follow the steps below and check. Please move to the next, if only the problem persists after completing each.
   
  Method 1
  Convenience store equipment and peripheral performance such that it can solve some common problems associated with the hardware attached to the computer. Follow the steps from the link below to be executed, which.
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  Method 2
  Run Windows updates and check if you have any availability for USB drivers. You can check the link below.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN
   
  Method 3
  Access the manufacturer's Web site and download the USB, the BIOS and drivers from the chipset and check the issue.
   
  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved.
  Changes to settings are at your own risk.
   
  I hope this helps. Please write to us if you need further assistance.

• Driver detective program does not start due to the error of standard police '"Regular", police Arial doesn't support style.

  Have updated to the latest version without result

  Hello Midasi,

  According to the Windows 7 Compatibility Center, Driver Detective version 8 is compatible with Windows 7. What version you are trying to install?
  See the list here for compatibility.

  I suggest that you contact the manufacturer, PC drivers headquarters for assistance with the question and see if they have updated their software.
  http://www.drivershq.com/

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• ProBook 4510 s: probook 4510 s windows upgrade

  My mother has a ProBook 4510 s, which was bought right before Windows 7 came out (all about 2009, I think) so its mobile currently works on Windows XP (32-bit processor). She does not use the computer for much - mainly domestic use for Gmail, saving photos, printing, web browsing, etc - and hopes to upgrade Windows rather than buying a new computer. He arrived at the point where she cannot even download pictures on his iPhone to computer and iTunes can be loaded on computers Windows 7 or higher.

  Because she has a ton of free space, and it seems that its operating system would allow an update to Windows 7, I want to know if it is better to just move him to 7 or upgrade to Windows 10.

  Hoping someone can help me to determine if it's worth the trouble to do the complete upgrade of Windows 10 - his cell phone will be able to manage the upgrade - or to just upgrade to Windows 7, and see how that works before making the switch to Windows 10 eventually.

  Thanks in advance for any help!

  Hello:

  Since there is no support W8.1, W8 and W10 driver for this model, I suggest you go on W7 and then try the W10, so that if W10 does not work, you can go back at least to W7, rather than to be up the Creek without a paddle if W10 does not work on the PC.

  You should be able to use the W7 drivers for devices W10 not drivers for, but since I've not tested W10 on 4510 s, I can't tell you if it will work or not.

  I tested it on the 6910p and the nc6400 and it works OK.  The only thing I didn't try was the fingerprint sensor (driver has been installed), and there is no driver for the infrared port, so I disabled the device in the BIOS, because I do not use that either.

• ProBook 4510 s crashed and closed during charging

  My probook 4510 s system crashed and closed when running connected to the power adapter. When it works connected to the power supply with or without battery inserted, it shuts down suddenly, charge led lights up blue and it remains blue after disconnecting the charging cable. Unable to reactivate it, not until the blue light turns off after a short time, only so that it can be turned on again. Same problem if you work connected to the power supply with battery purchased. I already took it to the original factory setting. Help, please. Thank you very much.

  Hello

  This may be interesting to try as well.

  First, stop the laptop, unplug the AC adapter unplugged, remove the battery and then press and hold the power button for a minute.

  Now, plug in the power adapter and start the PC without the battery inserted, start Notepad, open windows control panel, open Device Manager, expand the entry for the Batteries, do a right-click on theMicrosoft ACPI compatible with battery control method and selectUninstall - do uninstall not something else here.  When the uninstall is complete, shut down the PC, unplug the AC adapter, reinsert the battery and then start the PC on just the battery.  Windows will automatically reinstall the driver - leave Windows running for a few minutes. Shut down the PC again.  Now plug the power adapter (with the inserted battery always) and start the laptop to see if it helped the issue at all.

  Best wishes

  DP - K

• Smart HARD drive detects imminent failure on Satellite P

  Hello

  I have a message "SMART provides a defect on the disc dur0: TOSHIBA MK5055GSX-(S1)" or (the same in English) "Smart Drive detects imminent failure".
  On the newsgroups different 'people' says to change the disk.

  My problem is not to change the drive, it's easy. Expensive, but easy.

  As I understand it, on each disk from Toshiba, a hidden partition, which allows to restore the machine, with Toshiba Recovery Disc Creator there?.
  I would like to change the disc and use the Toshiba Recovery Disc Creator? to restore Vista.

  How can I reinstall everything what to use Toshiba Recovery Disc Creator? This new disk to reinstall Vista from this new album.

  Thanks for any response.
  ADri

  > If I understand correctly, each disk Toshiba, there is a hidden partition, which allows to restore the machine, with Toshiba Recovery Disc Creator?

  That s not entirely correct!
  The Toshiba Recovery Disc Creator creates the recovery disk! The recovery disk allows to recover the laptop using the drive and not the HARD drive recovery process!

  New portable Toshiba supports HARD drive recovery which allows to restore the laptop without the use of the recovery disc!

  You can view this document on the HARD drive recovery:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

  Welcome them

• HP pavilion 500 076ea: no hard drive detected or has no

  Put in a new power supply in a pc
  Comes up with no detected boot drive or does not, how can I solve this problem?
  
  What I have to go out and buy a new operating system e.g. Windows 8 to solve this problem or is the problem worse than that
  
  If I missed any information you need help I can provide
  
  Thank you

  Hi @Fraser11,

  Welcome to the Forums of HP's Support.   I believe that since the departure of the power supply in your Pavilion 500-076ea that your hard drive is no longer detected.   I am convinced that I will be able to help you find a solution, and I ask only that pay you it forward. When solve us the problem, I would mark you kindly post as accept as Solution so that others have the same or similar problem can find what worked for you.

  Please use the document of replacement of the power supply HP and Compaq Desktop PCs as a checklist to make sure that nothing was missed when you have replaced the power supply.  From my experience, most of the time when this error occurs after the replacement of the power supply there is a cable that is not properly plugged.

  Please let me know the results.

• Satellite P300-156 - driver detected on \Device\Ide\IdePort1 controller error

  Hello

  I have recently installed a secondary hard drive in my P300-156 and am having some problems with it. I get 11 event IDS in the event log system "the driver detected a controller on \Device\Ide\IdePort1. error" and suffer with very poor performance with this player.

  The drive is new and works fine in other systems and even works ok if I swap bays my P300-156, but the problem with this is that the drive does not fit in the other Bay, as it is quite thick. The player in question is a Samsung HM100UI 1 TB 2.5 "Sata. I also tried other readers in this Bay, and they work well too.

  I am using windows 7 ultimate and the Intel chipset drivers. It's an Intel ICH8M SATA AHCI controller, the 7.0.0.1013 driver version. Have tried different drivers and the AHCI/IDE mode. Also tried a new installation and the problem persists.

  Am at a loss why this disc problems is there anything else someone can suggest to try?

  Thanks in advance.

  > I also tried other readers in this Bay, and they work well too.

  This means that you had problems with the other drives in the second span?
  If Yes, then I guess some problem of compatibility between the P300 and the HARD drive

• Re: Satellite L555 11 L: BIOS indicates the drive HARD is not installed, BOOT Manager said HDD

  Hello!

  I had problems with my Toshiba laptop.

  When I tried to boot my system after a regular stop it does not recognize the HARD drive more.
  BIOS indicates the drive HARD is not installed, the said BOOT Disk Manager failed.

  Tried the HARD drive to a desktop computer and it works fine. This is not a new HDD SATA is recognized.
  However, the boot sequence itself and other functions seem to be ok.

  Who is wrong?
  The laptop is 1.5 years old and didn't have any problems before.

  Any help is appreciated ;)

  Hello

  It seems that the HARD drive is damaged.
  In your case the drive HARD test would be recommended.

  Download the software called Drive Fitness Test. It the free tool that can be used for the test of HARD drive.
  If the HARD drive is not detected or you will get errors, then it means that you HARD drive needs to be replaced and OS need to be installed again.

• Laptop HP ProBook 4510 s

  I tried to turn on my HP ProBook 4510 s laptop PC and it will not turn on. He works the day before, but nothing now. I plugged in the power cord, and the emblem of HP in the power button blinks. It will still not power on. Any suggestions would be greatly appreciated. Thank you in advance.

  I answered my own question.  I took out the battery and plug in the power cord. He shot straight up. I stopped and replaced the battery and excluded the supply cord. He shot right up again. Don't know what this does, but it worked.