Process does not seem to run on Page 1
After the user authenticates and is redirected to page 1 of the application, I want to put 4 session state variables. I'll put the variables with a pl/sql procedure call defined in section page process 1.The procedure call does not seem to run. Session state values are not defined and the procedure needs to connect to a table and it is not. I'm going crazy trying to figure this! Any help is appreciated.
I tried to define the procedure to run with point of process value 'on new Instance, after authentication' and 'on the load - before the Header. " Nothing seems to work.
Thanks for any ideas you may have,
Reid
Reid,
Have you tried running in Debug mode to see what events occur? Or go to Page 1 and change the display of events. This should give an idea of what is supposed to work.
One solution might be to run the process to Page 1 on new Session: after authentication, then just set the variables if one is currently zero, so it does not work whenever the user visits page 1. I used this technique successfully in my magnum opus.
You can do this with a condition or write directly in the process of PL/SQL code.
For example:
DECLARE
l_id_num VARCHAR2 (10): = v ('APP_ID_NUMBER');
BEGIN
IF l_id_num IS NOT NULL
THEN
...
Good luck
Stew
Tags: Database
Similar Questions
-
I tried to load several games I've played on this computer in the past, but now, it won't record the CD are in, it just keeps asking for me to put the cd. I tried a cleaning upward and uninstalled the program now, it will not install because it can not find the disc. Help, please!
Try running fix:
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problemsIf this work try another challenge it:
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
You can also make manual correction under "Let me fix it myself" Windows Vista -
As it can be seen in the OS 3 Web page will be available today, 13 September. However my Watch App does not seem to see the update according to the availability. When I go to software update, he repeats that my watch is up-to-date with OS 2.2.2. OS3 will be available today?
Hello
Yes - Apple advises that watch OS 3 is scheduled to be released sometime today.
-
roboformtaskbaricon process does not close after that firefox 9 is closed
Hello
roboformtaskbaricon.exe (v754) process does not close after that firefox 901 is closed. Even if I'm wrong, my guess is that firefox pushes this process of firefox, forcing him to run on its own. If it's a matter of roboform, then I will contact them.
Thank you, specialist
On the next page, scroll down to "RoboForm controls", then scroll down to 4. The taskbar icon under this heading. It seems that maybe the item to which you are referring. Taskbariconroboform .exefile name, it involves the Windows taskbar rather than the Firefox tool bar.
Clarification on roboformtaskbaricon.exe, its function and that it should close when you exit Firefox, Roboform online technical support contact and leave all the details of your question:
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
-
Vista Business 64-Bit with AutoCAD 2009 does not seem to use all 8 GB of RAM available.
A workstation newly built (S5000XVN Intel / Xeon / 8 GB RAM / 2 GB RAM video) with Windows Vista Business 64-bit is used with AutoCAD 2009 (64-bit). The workstation hangs under stress, apparently because not enough RAM is available. ("Stress" is "Turning entirely made of a certain complexity 3D drawings")
The Task Manager / Performance tab indicates never to use RAM above about 3.25 GB, even if ten or more concurrent applications are loaded, including IE 8 (6 graphically heavy windows) and AutoCAD with 6 or more complex drawings open at the same time.
There are two issues, I think:
1. in the event that a busy workstation indicate use RAM above the 32-old bit of 3.2 GB limit?
2 are there MS Windows Vista settings that are necessary to ensure the use of RAM available?Thanks in advance.
Thanks for the reply.
I studied the installation of AutoCAD 2009. It's actually the 64-bit version that is installed, and the Task Manager reports it as a 64-bit application when it runs. (In other words, it is not marked as a 32 bit application.)
I must admit that I no longer believe that the machine is running out of resources or do not use all the resources available to it. We tested the machine by throwing 18 complex, fully rendering the 3D drawings within the Academy, in addition to two cases of IE 8, three instances of Explorer Windows and MS Windows Mail. Use of the RAM did climb, reaching finally the 4.06 GB, clearly indicating that the 32-bit 3.2 GB limit has been exceeded. It seems that just drawings don't take up that much RAM. BTW, there was no increase in the paging activity that I could see.
However, the application does not seem to be frozen or looping when the client attempted to turn one of the drawings. The CPU on the two wires (Xeon processor) usage increased to 55% and remained there. the State of the process, as reported by the task manager went to "Not responding" and stayed there; and the display of the image froze on an empty workspace, with a three seconds flash drawing on every 20 seconds.
So: It now seems that there is a problem with AutoCAD, not a Vista problem. I would appreciate comments, however, if you think that this analysis is wrong, incomplete or based on wrong assumptions.
Thanks for your help.
-
Recently, I uninstalled Avira Premium Edition. I opted for 1 month trial but I uninstalled before the expiry of 1 month. The uninstall process went well. But when I restarted the computer, the Internet does not seem to work, but Google Chrome works as usual. When I tried to connect to MSN, it says "error Code: 80072ee7. It's something on the Internet connection. I guess it takes some files that must have accidentally disappeared with the uninstall process.
Any help will be greatly appreciated. Thank you.
Hello
If Internet does not cam chrome Google work either.
So, we know not what does not work.
In any case, try this.
WinSock and TCP/IP update.Type Cmd in the search text box.
Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt. Allow the elevation.
Type netsh winsock reset at the command prompt and press the Enter key.
Do the same process to refresh the TCP/IP just replace the command typed with.
netsh interface ipv4 reset Press enter
netsh interface ipv6 reset Press enter
ipconfig/flushdns press Enter
Restart your computer.
Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET
-
APX1099 process does not respect the "output Destination.
Hi friends!
I have run the APX1099 process to print COPY B 1099 files and I'll put the 'output destination' until I run it:
P.S. I have administrative privileges for this directory.
But the files are generated in a different directory and I can not find where this directory has been created (\appserv\prcs\psdev\files\XMLP). The process does not have the 'output destination' that I put forward.
Does anyone have an idea what could be causing this problem?
P.S. The output location in report definition routine is defined as "all":
Thank you very much for your help!
Kind regards
Tarsio Alvares
Tarsio Alvares based on code, I see in the App Engine, writing of file is not managed.
You can see that OutDestType = 6 (Web) and % OutDestType = 3 (printer) are dealt with. Technically, should also have some code for % OutDestType = 2 (file) to cover for the file option.
You will need to write the following code to operate temporarily. Moreover, wear it like a SR with Oracle that this appears to be a delivered report and should be able to print to file.
If OutDestType = 2 Then %
& REPORT_DEFN. OutDestination = FilePath %;
End - If;
As follows:
Let us know if that helps. Once I added this code, it seems to work very well when I'm printing to a file. Thank you!
-
APEX process does not...
Hello
I need help with a problem of apex. The problem is that the process does not work.
Process header before
declare
P12_STANDARD_USER VARCHAR2 (15);
Begin
If P12_STANDARD_USER is not null then
insert into user_default
(employee_number, default_user)
values
(: P7_EMPLOYEE_NUMBER, 'Yes');
On the other
insert into user_default
(employee_number, default_user)
values
(: P7_EMPLOYEE_NUMBER, 'no');
end if;
end;
p12_standard_user is a page item yes/no on the same page (12) as the process. Does anyone know what I did wrong?
I use apex 4.2Thanks in advance
concerning
ELCOELCO
ORA-06550: line 1, column 29: PLS-00222: no function with name 'MESSAGE' does exist in this scope ORA-06550: line 1, column 7: PL/SQL: statement ignored
You get the error is because apex_debug.message is a procedure instead of a function that is expected.
Sorry for the confusion but I meant for you to put code debugging with your existing code. For example
apex_debug.message('P12_STANDARD_USER is '||:p12_standard_user); If :P12_STANDARD_USER is not null then insert into user_default1 (employee_number, default_user ) values (:P7_EMPLOYEE_NUMBER, 'Yes' ); Else insert into user_default1 (employee_number, default_user ) values (:P7_EMPLOYEE_NUMBER, 'No' ); end if;
Now, the entrance is zero, so it does not insert the employee_number more too.
If you take just the debug message then how did you come to the conclusion that the value of P12_STANDARD_USER is indeed empty.
Now, the entrance is zero, so it does not insert the employee_number more too.
Do you mean that no new record has been inserted. Seeing that your code is an if of another construction if the code is running there should be a new record.
What it is not record inserted new means that the code of you is not running for some reason any. Is there a condition on the process.
Display Yes/No
You don't mean that the page element is display yes/no type. Which displays a list of selection with two values.
Are you course there is no invisible characters in the value parameters that must be empty.
I have a button Save as submit.
Do you mean that the process should run when you click on the "Save" button. If so, any reason why the point process of the process is "Header" and not "submit"?
Nicolette
-
Why Safary does not load the content of pages?
Why Safary does not load the content of pages? I mean, when I hover over the places where should be the content, he is always showing the "redirect to: [email protected]/" lower left. My Safari is 9.5 and worked fine until Safe Fimder Virus get inside my computer. Mozilla Firefox is a bit slower. If someone could give me an idea on how to deal with it, I would be happy.
Sorry if my English is not good, I am a Brazilian who is still learning English
Your English is very good!
Redirects are usually due to adware or malware.
Download the run MalwareBytes.
It of free and takes only a minute or two. Which should remove all adware and malicious software on your Mac.
-
Re: CD/DVD drive does not seem to start the DVD in Satellite P750
My CD/DVD drive does not seem to start DVD, it runs and runs and the only way I can run a DVD (i.e. film) is using Windows Media Center, while the software to install must be enabled in Windows Explorer.
Anyone?
Help, please.
Thank you!Have you tried to change AutoPlay settings?
Open Control Panel and Auto game options. Enable the option Use AutoPlay for all media and devices. Also change other options, especially for DVD movies, software and games. -
Portege M200 recovery process does not work
I want to re format my old M200 of 4 years using the original recovery disks (4).
The recovery.txt file that is stored on the first disc advise me of a process for this, but also States that "this utility does not if the drive has been formatted or converted to NTFS.My C drive is NTFS, and the recovery process does not work.
I'm unable to find any other documents or files on the drives to advise me what to do help.I would be greatfull for anyone who has experience with this issue who can advise me on the correct process to run my recovery on a drive formatted as disks
NTFS.
May I ask what laptop do you have: is it a M200 Satellite or Portege M200?
How have you tried to recover the laptop?
Have you tried to boot from the CD? -
I have a Thinkpad T450s and I'm trying to update the BIOS version 1.19 to 1.20. I've created a live usb with the 'el tortio' - image extracted using linux "dd". Once I boot on the USB under Legacy-BIOS and select upgrade, it proceeds witht the error message "the process does not have this system. The process has been cancelled. "I have disabled the protection against theft, AMT (I think this is the option) and I'm sure that I use the correct .iso file from the downloads section. I don't have a Windows operating system installed, but I'm able to start in various linux distributions using Legacy and UEFI methods.
Here is my BIOS information.
"Manage 0 x 0031, DMI type 0, 24 bytes.
BIOS information
Seller: LENOVO
Version: JBET54WW (1.19)
Release date: 06/11/2015
Address: 0xE0000Runtime size: 128 kB
ROM size: 16384 KB
Features:
PCI is supported
PNP is supported
BIOS is extensible
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
ACPI is supported
Legacy USB is supported
BIOS boot specification is supported
Targeted content distribution is supported
UEFI is supported
BIOS version: 1.19
Firmware revision: 1.2 "What could you suggest to get the update disc to recognize my system?
I think I've fixed the problem, I formatted FAT16 USB drive and not in FAT32 and also when you use the geteltorito command, it is preferable to use the-o option rather than a redirection ">"syntax. " An article said that it is best to drop in a DOS command line using the USB boot, then run dosflash.exe from there, however, I could not edit the .bat file, but it is an option however.
I hope this helps someone stuck in a similar situation.
-
I ran several analyzers antivirus from AVG to ODILE and none of them does not seem to get rid of this virus (Exploit: win32 / pdfjsc.dr)
Any suggestions apart from simply all formatting?
Hello
Exploit: Win32 / Pdfjsc.Dr
http://www.Microsoft.com/security/portal/threat/encyclopedia/entry.aspx?name=exploit%3aWin32%2fPdfjsc.DrIf you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be harder to detect as
the cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeSuperAntiSpyware Portable Scanner - free
http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGERun the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp?prevx=Y <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htmMicrosoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
After the removal of malicious programs:
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
RUN - type in the box-
sfc/scannow
Then run checkdisk (chkdsk).
RUN - type in the box-
Chkdsk /f /r
-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
================================
For extreme cases:
This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
uses aggressive methods to detect these threats, there is a risk that it can select some
legitimate programs for removal. You should use this tool very carefully and only after
you have exhausted other options.
http://us.Norton.com/support/DIY/index.jsp================================
If you are in North America, you can call 866-727-2338 for virus and spyware help
infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
international information, see your subsidiary local Support site.Microsoft support - Virus and Security Solution Center
http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
My Network dissapeard
Hi I cannot accese my internet it tell me there is no network not found, it does not seem to recognize my cable modem. It is said that she has not to connect to a service.i have tried to restore the computer to another point and it does not cant run my norton anti virus or update please help
Hello
You can uninstall the driver from Device Manager network, put it back, once again.
a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
b. find the network card, right-click on it and select Properties.
c. go to the driver tab and click Uninstall to uninstall the driver associated with the device -
PowerConnect 6200 ACL does not seem to work
Hello
I have a total of four 6248 s two groups at different locations that are configured with VRRP + OSPF. I tried to set up a simple ACL on either a VLAN to allow a portion of the traffic and block everything else, but I can't make it work. I have tried many combinations to try to get this working, but so far without success. It's just a simple ACL, which should allow the web/http traffic on the 10.1.30.100 server and blocks everything else.
The only type of ACE that seem to work are either a "deny ip any any" or "permit ip any any" If you try an ACE with a destination host and subnet mask 0.0.0.0 it's just all this blocking. Has anyone else had problems of the ACL or is it just my incompetence in preventing me from getting the 6200 ACL work properly? I didn't have this problem, get the ACL list to work on our Cisco 2811 routers, just at the moment where I tried on the PC6248s.
- config
- int vlan 720
- no ip-group vlan720-in in access
- output
- No list of access-vlan720-en
- access-list vlan720-in permit tcp any 10.1.30.100 0.0.0.0 eq 80
- int vlan 720
- IP access-group vlan720-in in
- output
- output
- copy, run start
- There
Just an update on this issue. I worked with Dell to determine why the ACL does not seem to work. We discovered that the 6200 apply ACL to the traffic as a VLAN ACL Cisco card as opposed to a router ACL entry. This causes the ACL to apply to not only routed or transferred but also traffic switched in the same VLAN.
This has been the source of my problems that my traffic is not limited to a single 6200. I developed a simple laboratory to check that the 6200 applied traffic switched in the same VLAN ACL.
First the 6200 has one ACL applied to VLAN5 both PC1 and PC2 are in VLAN 5. They are both on the same subnet 192.168.5.0/24. The ACL has a statement of "permit icmp any one" but nothing else. The PC1 and PC2 are running Windows XP Pro with IIS is installed for the test. The firewall on both is disabled.
PC #1 IP: 192.168.5.2/24
PC #2 IP: 192.168.5.3/24[6200]
| |
| |
| [2950T #2] <-->[PC #2]
|
|
[2950T #1] <-->[PC #1]In this scenario PC1 and PC2 can ping each other without problem because of the permit icmp any any statement, but you cannot access the IIS site on each of the other computers.
Dell said that this is normal and if you want communication VLAN VLAN you 'license ip
' to make it work properly. I also found that traffic back from other VLANs were also denied because of the ACL applied on all of the incoming traffic. As a solution, the license statement should be included for ALL traffic back to the limited subnet other subnets. So in this case "ip enable any ". I find it a bit annoying that ACL is applied in the form of maps of VLAN not like real incoming router ACL as they are on similar Cisco devices as the 3750. So there is a work around. I hope they can solve the problem in a future update, because I really think that the 6200 is a great device.
Here you can see the difference between VLAN ACLs cards and router entry ACL where they are applied in what concerns local traffic to VLAN.
http://www.Cisco.com/en/us/docs/switches/LAN/catalyst3750/software/release/12.2_25_see/configuration/guide/swacl.html#wp1572522
Maybe you are looking for
-
howcanIgettheaddressbarback?
I have problems with typing in the address bar that did not look like the address bar in the past. Don't have same appearance said Firefox. Click anywhere in the box got nowhere. I am not notified with all this, YET! I wanted to enter about: config i
-
I find it on the Toshiba Satellite C660 - 20L support page?
Hello I can't find my product ' Satellite c660 - 20L, why is this? Thank you and faster response the better. -ahmad sakr-
-
Sam A40: OS recognize the product USB but cannot install it
Hello I have some problems with some USB products connecting to my SA40. In some cases, for example a card reader or a mouse, the SA40 will recognize the product but can not install, not even "plug and play" products. Who can help me?
-
ASBL voice and data simultaneously
Anyone know why we can not make a phone call and use data at the same time on the VZW network? I am able to do that with my 1st gen Moto X, so it seems just stupid my 2nd generation cannot do. I discovered this last week I was on the phone with my da
-
I get a screen indicating the activation successful, when I close I get a screen that says "you must activate windows to connect" when I close my computer restarts. Here are the diagnostic report. Please help... Thank you Diagnostic report (1.9.0027.