Process is completed: Application is not responding...?

Similar Questions

• How can I update the UI without encountering a ' Application is not responding do not; completed process '?

  I'm trying to populate a table on the screen, and when the user clicks a Labelfield (20 lines are populated by click).

  When the user clicks the labelfield, following takes place:

  (1) a data segment is read from the SQLite database in a background thread.

  (2) data are then filled in the existing table on the screen (by adding more fields to the Table Layout Manager) in the invokeLater() method.

  I am currently facing a problem of ' Application is not responding do not; process is completed ' when I continue to load more items to say about 3 to 4 times (i.e. After about 60 to 80 lines are met).

  I fear that this could be caused by the user interface thread get resisted for a long time, while the population takes place. Is there another way to update the user interface, so that the application runs smoothly?

  I'd appreciate any help that I had with this problem for some time.

  You must use another thread to query the database and then creating and filling in the fields. After the creation of fields use the Manager.addAll () method to add an array of fields (in invokeLater() body of course).

• The application is not responding. The program can meet again if you wait. You want to put an end to this process

  Whenever logged on windows 7, I get the following message:

  "The application is not responding.  The program can meet again if you wait.
  Do you want to put an end to this process"with the choice of the end of the process and cancel.
  When I type complete the process the screen shows my wallpaper and not icons or the bar of windows at all. When I hit Cancel, the message of disappears for around one minute and shows up again.
  I can't use my phone at all in this way, so I hope you can help me.
  Sven

  Reboot the PC by using the F8 key at startup, this time select command prompt, and then follow the instructions for restoring the system;

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Start-System-Restore-from-a-command-prompt

  Select a restore point to a period where it was all is OK

• exporting H.264 "application is not responding do not.

  Tried to export my project complete as a 720 p h.264, and whenever I do ultimately goes pinwheel with "application is not responding do not.  I was able to export the project in three distinct elements to this setting, no problem, but for some reason when I'm doing plenty of 107 minutes of the project - it is not complete the task.  Your help is appreciated.

  Wayne

  Found this ad on your site and it solved the problem for me.  It's maybe ordinary... ?  And that's why you (Mercury Playback Engine GPU) on your list to read before posting questions. ?   Hope this helps someone else as well.

  4 re: my videos stop rendering and exporting to 80% any help?

  

  @eatsomefood , November 1, 2013 12:24 (in response to Starliege)

  I found a solution to export a doc of long hours, who worked with first CC.

  File > project settings > General > Renderer

  The rendering engine is the default as: Mercury Playback Engine (Open CL) GPU acceleration

  Change this: Mercury Playback Engine software only

  After weeks of 80% in failure exports changing this setting worked and it spits out my MPEG2 file in no time.

  Hope this helps

  • Re: My videos stop rendering/export to 80% support?

• Safari is quit unexpectedly or the Application is not responding

  Since getting a new hard drive installed in my Mac in April through the Apple repair program, I had problems with Safari.  Safari's often freezing, and the application is not responding all the time.  I have to force quit and sometimes it does not work even in the judgment of Safari.  Often, I have to use the power switch on the back to restart my computer because of safari gel.

  I tried the recommendations of apples for Safari gel and spent time with telephone support, cleaning of my library without result files.  I deleted the pop-ups, cleaned the library files, deleted my hard drive duplicate files and cleaning junk files while I have 2.4 to 3 TB is free.

  Other ideas, it could be the cause?

  When the freeze on Safari, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Some applications does not respond after sleep (El Capitan)

  Product: 13 '' Macbook Pro retina (12.1) (base model sheet)

  El Capitan Version: 10.11.6

  The problem:

  When I connect after that my Macbook went down, I often have problems with some of the stock apps. In particular, I had this problem with the Mail Messages, reminders and calendar. This seems to be a problem when they are open before putting the macbook to sleep. This same problem happened with non-apple-stock applications.

  Once logged in, if I click on the application icon, the application window will come into focus. After that, I'm unable to use the application (as if frozen) and I often just see the spinning Rainbow mouse icon.

  Can I force quit the app and then open it again, but now the application does not load.

  To solve the problem, I can restart the macbook and all is well.

  Some others probably associated with funny things I saw (only attracted to this once... but did not look at one time or another):

  I open the calendar application after the macbook was sleeping and my full general calendar was empty (which would be nice if it were true!). In any case, I checked the 'accounts' and also found that there was no accounts! (I have 3 goes). So I wonder if there is a problem with the accounts after sleep since these apps I've had problems with all iCloud account and mail also uses some other accounts.

  Big Question: Is there something I can do to make that happen?

  Thank you very much for your help! Sorry if this is a double post, it is difficult to find an answer via google search.

  Start Safe Mode removes the system caches that can help...

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then try to Message, Mail, etc.

  If you still have problems, check the startup disk.

  Launch the disk utility located in/Applications/Utilities

  Then select the disk to boot on the left and then select the first aid tab and then click run.

• HP L7780 completely enclosed, will not respond to buttons or power down

  Have a brand new HP L7780 who has for some reason any locked up.  He is unresponsive to other buttons.  Only way to turn off is to unplug it from the wall.  Power on, fails to go through the series of tests, as it should.

  Impossible to update firmware and can not access the menu.  Not a single button responds.  Machine does not respond when you open the lid of the scanner.

  The only answer is a motor noise when opening the door of ink cartridge, but no reaction when you remove or insert the ink cart.  LCD display features of a clock dead at 00:00 and date is Jan 00, 00.  Cannot change the clock settings.

  Try this:

  1. unplug the power cable from your wireless router (im just assuming you have one, cos that's what causes this problem).
  2. unplug the power cable from the printer, then plug it in again. Now, the printer should start up and it must not freeze.
  3 turn off the radio wireless to the printer by pressing Menu Configuration > network > wireless > Off.
  4. turn on the wireless router.

  If you plan to use the printer with the USB cable, then everything just keep installing the software and connecting the USB cable when asked to. But if you plan to use wireless, then there is a workaround solution.

  1. with wireless radio off printers, plug an ethernet to your router and the printer cable.
  2. in a few seconds, he should get his IP address. You can see on the printer using Setup > Netowrk > view network settings > display wired summary.
  3. Once this is done, go back to the network menu > Advanced Setup > parameters IP and change IP address of "Automatic" to "manual". Confirm the IP address, subnet mask and the default gateway.
  4. now unplug the cable at both ends. Turn the Radio on wireless to the printer. Should not freeze now. Restart the printer to confirm the resolution.

• Application is not responding

  FB app did not. The application icon appears a dark shadow on the screen. Can't open or delete. Phone rebooted but the problem persists.

  Try to hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears. You won't lose anything.

  If this does not help, go to settings > general > storage & use iCloud > manage storage (the first) > and remove the FB app it. Restart your phone, and then reinstall the application.

• Icons of applications do not respond!

  Since the release of El Capitan 10.11.5, some of my applications (specifically requests that launches other applications) are block when I left them, and they remain hovering on my dock. And no, ctrl + click > forcequit does nothing, and it does not even appear on the activity monitor. The strange thing is the applications themselves leave, leaving behind a shell of an icon sitting there in my dock. I can't reboot my computer because the thinking mac these icons are requests pending to stop smoking because they are forever does not and cannot continue to close. The only way to erase my docks of these stuck icons is to force a shut down that I'd avoid everytime I want to play games.

  Four requests (LolClient, League of Legends, Borderlands 2, Information System) to the right are all "shells" and those who still does not and can not be closed.

  • LolClient and League of Legends have been opened automatically through the right LeagueofLegends of the application of the steam app.
  • Borderlands2 was opened automatically via the application of steam, which, if some of you don't know, to the right of the dictionary application.
  • Information system has been opened through appleicon top left > about this Mac > report on the system.

  All this has happened recently, and I have no idea what caused it, the most recent update may

  Data sheet:

  • MacBook Pro (retina, 13 inches, early 2015)
  • Processor: Intel Core i5 at 2.7 GHz
  • Memory: 8 GB 1867 MHz DDR3
  • Graphics card: Intel Graphics Iris 6100 1536 MB

  Try keyboard shortcut to force quit open applications: command + shift + option + ESC press and hold for three seconds.

• Various applications do not respond

  Hello

  I can't open my application textedit on my iMac and more worrisome still I can't access the app store. I tried a landing forced the relevant plists in my home folder / prefs but alarmingly no textedit those seems to be there, and only the com.apple.appstore seems to exist (storeagent, one is missing)

  Any advice here would be great - I tried resetting the PRAM and reinstalling recovery, but nothing seems to work. Search Google is not either any highlight. Help, please!

  I'm under btw 10.10.5 on an iMac 2010 MIS...

  Thanks in advance

  Please download and install EtreCheck from http://etrecheck.com/

  Run it and post the report here.

• (Word2007 and Acrobat Reader 9.3) software applications do not respond (show the codes of errors/etc) ONE of my user accounts (running Vista Home Premium 64); will work perfectly on all the other (total of 3) user accounts.

  8.3 and word2007 Acrobat (version family and student) does not not in one of my user accounts - no problem in others; downloaded Acrobat 9.3; problem persists in Acrobat; Failed to get support for Word as they know is no longer my (expired) product key. Any method to repair/restore/reinstall to only the affected user account.

  Hi Chuck41,

  Since both applications work correctly on some other user accounts except the account of a user that can occur if this user account is damaged.
  You will need to create a new user account and then transfer the file and the settings of the user account damaged to the new user account.

  For more information please visit the link below.
  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Default e-mail application is not responding

  I accidentally deleted some files which are necessary for the mail app Apple run on my MacBook. I'm currently under OS X El Capitan. For weeks, every time I open messages, the icon bounces up and down, and then it gives me this error:

  

  I can always receive notifications, I can't answer or open the application itself. I'm new on this. Is there a way I can simply reinstall the messages app and just start over again...?

  Thank you for your support.

  I accidentally deleted some files

  What are the files?

• Spotify application will not close or respond to anything

  So basically, for the last two weeks, my Spotify application icon was opened in the dock while saying "Application is not responding do not. I can see it in the menu to force her to leave, that I used several times to try to force quit, no luck. I also rebooted my Macbook Pro several times with that it is always visible on the dock. I tried to view and close it in Activity Monitor and Terminal through other help topics but is not visible in these applications, i.e. it does not appear on the active process or in a Terminal (when the Commander in Chief u etc.).

  It's very annoying that I can't use spotify now on my macbook, as she says she is already open, and I can't uninstall it because it says that the application is active and used. I also tried to reinstall without uninstalling however it asks me to close the original Spotify before installing.

  I am running OS X Yosemite - Version 10.10.5

  MacBook Pro 13 "(early 2011)

  Intel Core i7 2.7 GHz

  Please, any help would be fantastic!

  See Spotify forums for suggestions. These might help:

  https://community.Spotify.com/T5/help-desktop-Linux-Windows-Web/help-SPOTIFY-won - T-QUIT/td-p/105315

  https://community.Spotify.com/T5/help-desktop-Mac/Spotify-crashing-on-startup-OS X-Mavericks/m-p/706255/point high/true #M7...

• Applications not responding do not or it is slow to open

  When I opened my system in the morning all my Applications do not respond or are very slow to react and I get"' Application messages that does not." If I force close and reopen so they work perfectly afterwards. No idea how to solve this problem?

  Go to EtreCheck - download and run it, and then copy the status report and paste it here.  If there is something on your system causing the slowness you encounter, see us and I hope to be able to advise on what to do next.

• Application does not error.

  Hi, I use an Application class to:

  1) begin to setlotationlistener and a thread.

  first listener to read information given and send GPS via Web Service location

  and second thread to connect to the server via WS too, to get some information.

  (2) recording mainApp in sleep do:.

  While ((t1! = null & t1.isAlive ()) |) ((t2! = null & t2.isAlive ())) {

  Thread.Sleep(30*60000);

  }

  (t1 is always null in this scenario)

  and then (3)

  If (! mainApp.isHandlingEvents ())

  mainApp.enterEventDispatcher ();

  (Threads some write log to a file)

   

  After awhile the app breaks with "the application is not responding... process is completed."

  I don't know where to find the lock or where app is unresponsive...

  Help!

  Thank you.

  The StartGPSTracking() function is called on the thread of the event. After starting tSettings, enter a loop where you wait 30 minutes. This blocks the event thread, which is causing your problem.

  I did not work in your logic to see why you need to sleep here, but you will need to remove it.