Processario Compaq SR1000 primer not.

Similar Questions

• Re: Satellite L855-149 primer not, he keeps making a hard cock

  Can someone please help?
  My Toshiba Satellite L855-149 primer not Windows or same boot a disc to install a new copy of windows 7. He keeps making a firm hard down when trying to load the screen of windows 7. It will only start in safe mode.

  Its a little strange... my head made shipwreck.
  Anyone had this same problem?
  Help, please

  As I see you have tested on power supply battery. The same thing happens on the power supply?

  Anyway, this issue is for the service then I recommend strongly to contact the nearest Toshiba service provider and ask for help. In my opinion, these questions it's that no much you can do about it.

• CQ57 229YWM: my CQ57 229YWM compaq persario is not turn on no lights, except the battery blinks three times

  My CQ57 229YWM compaq persario is not turn on no lights except her flashing battery three times I did everything I thought about doing but did not work.

  What should I do?

  You mean just for the cable of the wall power brick? You're lucky, those that cost a little money.

• Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation.

  Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation. HP can't help. Your say talking to HP and HP technicians say they are unable to help him. I'm now using valid XP. HP say that conflict with Vista. Can anyone help?

  original title: VISTA VS. XP

  Your technicians say talk to HP

  Sorry, this is not Microsoft.  This is a public forum from user to user hosted by Microsoft on its servers for the comfort of its clients, and we all here are volunteers.

  You say you use XP.  What is your question?  What do you mean 'conflicts with Vista?

  I suggest recovery discs you order from HP for your computer.  If HP is no longer the issue of stocks you can order such a third of Recovery - Disks.com.  There are several of these companies.  If you are going to use XP, you need to install XP from scratch and this means that you need XP drivers for your brand and model.  If HP has no XP drivers on your computer you must not try to use XP on it.

  Remember that Vista Starter, Home Basic, Home Premium and Ultimate out of Microsoft support on 10 April and there will be more updates, including critical security patches after that date.  Only Vista business and company will continue to receive updates.  You might consider this a good time to upgrade to Windows 7.  You must download and run the Windows Update Advisor once you restored Vista successfully.

• . My Pavilion P6837c primer not. F9 and F11 do not work.

  Good day, my 15 month old Office Pavilion primer not.  During a hard stop and start - the HP window open (with the F11options F9) - but does not respond to one.

  The next to come and screen says

  2.1 build 083

  1997-2000 Intel Corp.

  IS COVERED BY 1 OR MORE OF THE FOLLOWING PATENTS

  SERIERS FAMILY IDE CONTROLLER

  V.1.22 C03/16/10

  R:2 C D7 27 24 62 23

  GUID, 3738 CD68-31589F10-34EO-74F01C4B26BA

  SELECT PROPER BOOT DEVICE

  MEDIA IN KEY SELECTED BOOD DEVICE, THEN PRESS

  THEN NOTHING.

  COULD REALLY USE HELP HERE - JUST SHOCKED THAT A HP PRODUCT WAS GOING TO DIE SOON.  OUR WHOLE HOUSE IS HP ALL.

  LOOKING FORWARD TO ASSISTANCE.

  Thank you

  BRIAN

  Hello Brian,.

  Are you able to get into the BIOS of the machine? After pressing the power button immediately start typing to the F10 on the keyboard key.

  If you are able to enter the BIOS and reset the default settings to see if that helps.

  If you are not able to enter the BIOS, then you want to clear the CMOS on the motherboard. On the motherboard is a rider.

  This jumper allows you to clear the Real Time Clock (RTC) RAM in the CMOS. To clear CMOS, follow these steps:

  1. turn OFF the computer and unplug the power cord.
  2. Locate the marked jumper CLR_CMOS.
  3. move the CAP from pins 1-2 (by default) to pins 2 and 3.

  
  4. wait 5-10 seconds, and then return the jumper on pins 1-2.
  5. you can now restart the PC.

• Compaq presario cq56 primer not.

  Model: Compaq Presario CQ56-219WM

  I've had the computer for only less than a year. When I press the power button, the computer starts, appears red 'Q', then 'hangs' on a black screen with an underscore flashing. I ran the diagnostic tests available and everything SEEMS fine, but it still does not boot past the black screen. Tried a hard reset, still no luck.

  Hello

  Assuming you are using Windows 7, try the following.

  If you do not, use another PC to create a Windows 7 recovery CD.  Download the ISO relevant among the links below - if you are unsure, your laptop is listed as having a 64-bit installation...

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  Demarrer start from the rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• HP COMPAQ 6710 b / not accelerated Pixel of Minecraft format

  Hello, I have an old laptop HP Compaq 6710 b and I try to get Minecraft running. It ran on windows 7 a few months ago but now I have upgraded to Windows 8 and I have the latest video on Windows Update driver, because I can't find the video driver for Windows 8, you can help me get Minecraft running?

   

  I purchased version of the game.

  I also got it running on Ubuntu.

   

   

  Journal of Minecraft:

   

  -Report of crash Minecraft-
  I bet that Cylons wouldn't have this problem.

  Time: 26/04/14 13:36
  Description: Game initialization

  org.lwjgl.LWJGLException: Pixel format not accelerated
  at org.lwjgl.opengl.WindowsPeerInfo.nChoosePixelFormat (Native Method)
  at org.lwjgl.opengl.WindowsPeerInfo.choosePixelFormat(WindowsPeerInfo.java:52)
  at org.lwjgl.opengl.WindowsDisplay.createWindow(WindowsDisplay.java:244)
  at org.lwjgl.opengl.Display.createWindow(Display.java:306)
  at org.lwjgl.opengl.Display.create(Display.java:848)
  at org.lwjgl.opengl.Display.create(Display.java:757)
  at org.lwjgl.opengl.Display.create(Display.java:739)
  in azd. Z (sourceFile:367)
  at azd.e(SourceFile:689)
  at net.minecraft.client.main.Main.main(SourceFile:103)

  A detailed itinerary of the error, its code path and all known details is as follows:
  ---------------------------------------------------------------------------------------

  -Head-
  StackTrace:
  at org.lwjgl.opengl.WindowsPeerInfo.nChoosePixelFormat (Native Method)
  at org.lwjgl.opengl.WindowsPeerInfo.choosePixelFormat(WindowsPeerInfo.java:52)
  at org.lwjgl.opengl.WindowsDisplay.createWindow(WindowsDisplay.java:244)
  at org.lwjgl.opengl.Display.createWindow(Display.java:306)
  at org.lwjgl.opengl.Display.create(Display.java:848)
  at org.lwjgl.opengl.Display.create(Display.java:757)
  at org.lwjgl.opengl.Display.create(Display.java:739)
  in azd. Z (sourceFile:367)

  -Init-
  Details:
  StackTrace:
  at azd.e(SourceFile:689)
  at net.minecraft.client.main.Main.main(SourceFile:103)

  -Details of the system-
  Details:
  Minecraft version: 1.7.2
  Operating system: Windows 8 (amd64) version 6.2
  The Java Version: 1.7.0_55, Oracle Corporation
  Virtual Java machine version: Java hotspot 64-bit Server VM (mixed mode), Oracle Corporation
  Memory: 45744712 bytes (43 MB) / 80216064 bytes (76 MB) up to 1431830528 bytes (1365 MB)
  JVM Flags: 2 total; -XX:HeapDumpPath = MojangTricksIntelDriversForPerformance_javaw.exe_minecraft.exe.heapdump - Xmx1536M
  AABB Pool Size: 0 (0 bytes, 0 MB) allocated, 0 (0 bytes, 0Mo) used
  IntCache: cached: 0, tcache: 0, limit: 0, tallocated: 0
  Has released Version: 1.7.2
  LWJGL: 2.9.0
  OpenGL: ~ ~ ERROR ~ ~ RuntimeException: OpenGL context not found in the current thread.
  Modded is: Probably not. Jar signing remains and customer brand is intact.
  Type: Client (map_client.txt)
  [Resource packs:]
  Current language: ~ ~ ERROR ~ ~ NullPointerException: null
  Position of Profiler: N/A (disabled)
  The size of the Pool of Vec3: ~ ~ ERROR ~ ~ NullPointerException: null
  Anisotropic filtering: disabled (1)

   

  Hello:

  See if the manual installation of the driver Windows 7 works to support page and drivers of your laptop.

  If you do not know how, please let me know if you run W8 32-bit or 64-bit, and I will guide you through the process.

• Satellite Pro T130 - 14 M - primer not

  I have the laptop above that does not include a DVD player. Recently updated Itunes and sync an Iphone. When I switched on the machine then began to start up normally but ended up with a black screen on which the mouse pointer has been visible and moving when you use it. Not be able to start in safe mode to restore before update.

  If the startup but press f11 get the win 7 but not icons background screen or access to programs. Fortunately have saved data (other than the new additions to itunes)

  Can anyone recommend what to do next - have had the laptop since April 2010.

  Help

  Hey,.

  To be honest I put t think that it is what you can do if you can boot in safe mode t and the same system rollback doesn't work too

  So I think that you need to reinstall Windows. This means that you can use HDDrecovery from Toshiba to do this. It removes only the first partition, but it is good that you made a backup, must always be carried out.

  About HARD drive recovery, you should follow the instructions here:
  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

• HPE 137c: Primer not

  My system won't let me start now. This has been a problem for more than a year of market. I did a cover several times since the portioned disk thinking I've got a nasty virus in it, I did when all the problems started. I tried everything to get this but still problems starting. At startup, it goes through the repair of windows for an hour, then tells me that there is nothing wrong, but still does not start at the top. Safe mode does not work, will of the nothingness of recovery at any time. I think just to replace the hard drive and get the: Windows 7 64 b A1NAv6PrA1 + Supp 7 recovery Kit, to do a reinstall on the new hard drive. Which will work?

  Hi @Joe-mama,.
  
  Please become a member of the HP's Support Forums. I understand that you have a problem with the computer does not start. I'll be happy to help you.

  First of all, I would like to go through the document for computer does not (Windows 7).

  Replace the hard drive works until you get the virus again. On the spyware, adware and browser hijacking software

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Satellite Pro M10 primer not more

  My M10 Pro Sam worked fine until yesterday. I removed the hard drive just to check the part number (that I need to install a larger capacity drive and want to make sure that I understand) and then re-inserted. Now it starts where the loading screen XP Pro (black background) who disappears, and then the screen turns white. That's what normally occurs during startup, except that there would be a cursor on the blank background for a few seconds until my desktop appears. Also, when he stopped to this white screen the the hard drive led on the front of the laptop flashes regularly all the seconds. I desperately need some data on the hard drive (and no, this is not all backed up) if I don't want to use the recovery CD which is just a ghost image (isn't). The drive is formatted in NTFS. I mention this because when I tried to use the recovery disk to check the integrity of disk there was an error message that says that the NTFS log file is not loaded. It will not answer all the mode without failure-type F8 options. I think I messed up the process somehow to remove the disc rather than physically break anything. It seems that he can read the boot partition, but not details. Can anyone suggest how to solve this problem, or worse comes to worse a way to recover the data from the drive?

  Thanks and gratitude in advance.
  Chris

  Hi Chris

  If the system runs stable, you can remove the HARD drive, as many times as you want and it should have no one any influence on anything whatsoever. I deleted my Tecra HDD very often and it still works well.

  Back to your question: If there is no possibility try to connect your HARD drive as external device to the other laptop or desktop computer to see if you can see and even back up all your important data.

  All Toshiba laptops, I suppose, because two years have NTFS and is nothing unusual.

• Satellite L300 - primer not

  My L300 played upwards, itunes was the source of the problems. I decided to reinstall the factory settings of the F2 Setup utility that fixes everything very well.

  A day later, after you have reinstalled itunes and other applications, the computer went to black screen and does not start, now, to the top. When I press F2 I get the page of the Windows boot with the key manager F8 advanced option, but when it is pressed on the screen becomes black. If no button for more than one second, he made a continuous beep loud. If I select the option diagnostic Windows memory, it works up to 99% and then freezes.
  Looks like a failure of HARD drive for me?

  The laptop is old warranty so not more than 20 months.

  Hi Dr_Huuffuuhhrr,

  > If I choose the option diagnostic Windows memory, it works up to 99% and then freezes.
  Looks like a failure of HARD drive for me?
  Do you really think that it s a HARD disk if failure memory diagnostic freezes at 99%?
  Memory diagnostic tool is related to memory modules (RAM live) and no HARD drive.

  Theoretically, it could b related to the RAM, if you have already reinstalled Windows using the Toshiba recovery disc.

  You should check out some online shops for compatible RAM modules. You can change it yourself and as far as I know, you can find more information in your user manual. :)

• Satellite L100 no primer not if the WiFi is enabled

  Hello

  From the beginning, yesterday for the first time my husband connected its Satellite Pro L100 PSLA4E to a LCD TV using an s-video cable. Everything seems to work properly but thebackground on thedesktop had disappeared, there was just a white background combined with all the usual desktop icon. It has restarted the lappy thought it would be sort, but have not arrested the TV first. The lappy didn't start back up - just had a black screen Uni, no warning or anything like that.

  A couple of friends mind technology came at this time and suggested the lappy had "lost" his display drivers, and after a lot of research has decided the only option was to reinstall everything from scratch.

  I don't have the original Toshiba restore discs or recovery discs so downloaded all the drivers from this site. Now the laptop won't boot if the wifi is enabled. This model has a network card Atheros - at least the lable on low said contains Atheros AR5BMB5.

  If I turn the wifi on off switch the lappy starts every time, however, if the switch is on it will not start even in safe mode. If I turn on wifi after windows THAT XP has started up the lappy freezes and keyboard etc are out of order and I have to force a shutdown by pressing the power button.

  So far I have spent hours this trawling and other websites to try to find clues that could help.

  Does anyone have any suggestions as Christmas is likely to be hell if her husband has not his lappy to play with!

  Thank you very much in anticipation.

  Tree

  Hello tree

  After almost 10 years with Toshiba computers laptops, I would say that I have never heard of something like this. To me, this seems incredible.
  The best solution for you is to install the OS by using original Toshiba recovery image. If you do not have one you can order it.

  What you can try is to enter the BIOS at startup settings. Set it to default settings and check if the problem persists.

• Satellite L300D-13s, crashed and primer not

  I received an alert on my Toshiba L300D-13 s via Toshiba Tempro alerts to download the latest version of the BIOS updated. I downloaded the update and installation, during installation the PC crashed and froze completely lost power for about 30 seconds.

  Since this laptop will not start, power that the battery is and plug lights are turned on, also when I press the power button, the fan starts and the lights on the keyboard flash but then nothing. The laptop does nothing the fan works for a short period and then turns off.

  I'm not an expert but I think there must be something seriously wrong with her, any advice would be greatly appreciated. The laptop is still under warranty, so as soon as I get some sort of confirmation that presents a serious problem I can send it off for repair.

  Hello

  Thanks for the feedback buddy.
  I think that if the guarantee is valid then it s always advisable to get in touch with ASP in your country.
  Generally guarantee must cover everything!
  Guys might try to reflash the BIOS to the trad-BIOS version.
  This update of the BIOS can be done using a floppy disk, and doesn t need a running windows system!

  Welcome them

• HP Compaq DC7800 does not start properly (fan is going crazy)

  Yesterday I wanted to add a TV tuner card to my DC7800, but after that, I saw that the power of the tuner (no PCI) card had disappeared. I decided to shut down the computer and run it. I would work out the power cable later.

  Since then, the computer does not start really. Looks like it starts and the fan starts to turn. After some time, the fan goes completely wild! There is no beeps of the main card. So, it seems that BIOS does not either.

  Please help me!

  Next: is it possible to get the answers here notificiations email?

  My apologies for not responding earlier!

  I have fixed the problem. I removed the firewire card and then started the pc. After that I insterted the card firewire again and both times the computer still worked.

  Probably what happened is this: I had the tunercard connected to the firewire card, but no power supply again. Most likely the tunercard was draining the energy of the firewire card and this way the power supply of the computer has become a sort of State course...

• Presario CQ43: Compaq Presario do not start when the hard disc

  So I got a laptop at home lying around, I put a hard drive in it and it won't do anything. The screen is empty without lights or beeps. ; The only light is the power button which turns off after a few seconds. When I take what he says f30 no HDD installed.

  Hi @kiwikieran,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your Compaq Presario CQ43 notebook and with the new hard problems. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

  What are the specifications of the new hard drive?

  Here is a link on tips for a new hard drive connection.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.