HPE 137c: Primer not

Similar Questions

• Re: Satellite L855-149 primer not, he keeps making a hard cock

  Can someone please help?
  My Toshiba Satellite L855-149 primer not Windows or same boot a disc to install a new copy of windows 7. He keeps making a firm hard down when trying to load the screen of windows 7. It will only start in safe mode.

  Its a little strange... my head made shipwreck.
  Anyone had this same problem?
  Help, please

  As I see you have tested on power supply battery. The same thing happens on the power supply?

  Anyway, this issue is for the service then I recommend strongly to contact the nearest Toshiba service provider and ask for help. In my opinion, these questions it's that no much you can do about it.

• . My Pavilion P6837c primer not. F9 and F11 do not work.

  Good day, my 15 month old Office Pavilion primer not.  During a hard stop and start - the HP window open (with the F11options F9) - but does not respond to one.

  The next to come and screen says

  2.1 build 083

  1997-2000 Intel Corp.

  IS COVERED BY 1 OR MORE OF THE FOLLOWING PATENTS

  SERIERS FAMILY IDE CONTROLLER

  V.1.22 C03/16/10

  R:2 C D7 27 24 62 23

  GUID, 3738 CD68-31589F10-34EO-74F01C4B26BA

  SELECT PROPER BOOT DEVICE

  MEDIA IN KEY SELECTED BOOD DEVICE, THEN PRESS

  THEN NOTHING.

  COULD REALLY USE HELP HERE - JUST SHOCKED THAT A HP PRODUCT WAS GOING TO DIE SOON.  OUR WHOLE HOUSE IS HP ALL.

  LOOKING FORWARD TO ASSISTANCE.

  Thank you

  BRIAN

  Hello Brian,.

  Are you able to get into the BIOS of the machine? After pressing the power button immediately start typing to the F10 on the keyboard key.

  If you are able to enter the BIOS and reset the default settings to see if that helps.

  If you are not able to enter the BIOS, then you want to clear the CMOS on the motherboard. On the motherboard is a rider.

  This jumper allows you to clear the Real Time Clock (RTC) RAM in the CMOS. To clear CMOS, follow these steps:

  1. turn OFF the computer and unplug the power cord.
  2. Locate the marked jumper CLR_CMOS.
  3. move the CAP from pins 1-2 (by default) to pins 2 and 3.

  
  4. wait 5-10 seconds, and then return the jumper on pins 1-2.
  5. you can now restart the PC.

• HP Pavilion Elite HPE - 580t: could not find driver for integrated Ethernet card for desktop HPE 580t

  This desktop computer has been through a number of operating systems and should now have 10 32-bit Windows (for other software support needs).  All right, except that it lacks drivers for connection to Ethernet (built-in) on board.

  I tried the approach of Windows Update, the "update driver" and search HP, Intel, QLogic and other places of Ethernet NIC and Chipset drivers... nothing fits or works.  The hard drive has long been wiped, so there is no recovery partition, nor do I still support discs. :-(

  Is the reported by Device Manager hardware ID: PCI\VEN_14E4 & DEV_164A & SUBSYS_3070103C & REV_02.  164 a same device does not appear on the pci database. :-(

  Yet once again, I need to Win10 - 32-bit (no 64 - bit).  Thanks in advance for any help that can be given.

  Hello:

  There are no W10 driver for this chip ethernet I can find.

  In fact, everything that I could find were drivers for Windows Server 2003 and 2008.

  HP doesn't even have driver Broadcom ethernet on your PC support page, and I couldn't find the site of Broadcom or the other.

  I explored the Broadcom file and there is no support drivers for the hardware ID you have posted in the file.

  So, the only suggestion I can offer would be to try the driver I compressed upwards and attached below.

  Download and uncompress the file in its folder.

  Don't do anything with the files in the folder.

  Go to Device Manager and click on the ethernet controller requiring driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and see if the driver will install.

• Satellite Pro T130 - 14 M - primer not

  I have the laptop above that does not include a DVD player. Recently updated Itunes and sync an Iphone. When I switched on the machine then began to start up normally but ended up with a black screen on which the mouse pointer has been visible and moving when you use it. Not be able to start in safe mode to restore before update.

  If the startup but press f11 get the win 7 but not icons background screen or access to programs. Fortunately have saved data (other than the new additions to itunes)

  Can anyone recommend what to do next - have had the laptop since April 2010.

  Help

  Hey,.

  To be honest I put t think that it is what you can do if you can boot in safe mode t and the same system rollback doesn't work too

  So I think that you need to reinstall Windows. This means that you can use HDDrecovery from Toshiba to do this. It removes only the first partition, but it is good that you made a backup, must always be carried out.

  About HARD drive recovery, you should follow the instructions here:
  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

• Satellite Pro M10 primer not more

  My M10 Pro Sam worked fine until yesterday. I removed the hard drive just to check the part number (that I need to install a larger capacity drive and want to make sure that I understand) and then re-inserted. Now it starts where the loading screen XP Pro (black background) who disappears, and then the screen turns white. That's what normally occurs during startup, except that there would be a cursor on the blank background for a few seconds until my desktop appears. Also, when he stopped to this white screen the the hard drive led on the front of the laptop flashes regularly all the seconds. I desperately need some data on the hard drive (and no, this is not all backed up) if I don't want to use the recovery CD which is just a ghost image (isn't). The drive is formatted in NTFS. I mention this because when I tried to use the recovery disk to check the integrity of disk there was an error message that says that the NTFS log file is not loaded. It will not answer all the mode without failure-type F8 options. I think I messed up the process somehow to remove the disc rather than physically break anything. It seems that he can read the boot partition, but not details. Can anyone suggest how to solve this problem, or worse comes to worse a way to recover the data from the drive?

  Thanks and gratitude in advance.
  Chris

  Hi Chris

  If the system runs stable, you can remove the HARD drive, as many times as you want and it should have no one any influence on anything whatsoever. I deleted my Tecra HDD very often and it still works well.

  Back to your question: If there is no possibility try to connect your HARD drive as external device to the other laptop or desktop computer to see if you can see and even back up all your important data.

  All Toshiba laptops, I suppose, because two years have NTFS and is nothing unusual.

• Satellite L300 - primer not

  My L300 played upwards, itunes was the source of the problems. I decided to reinstall the factory settings of the F2 Setup utility that fixes everything very well.

  A day later, after you have reinstalled itunes and other applications, the computer went to black screen and does not start, now, to the top. When I press F2 I get the page of the Windows boot with the key manager F8 advanced option, but when it is pressed on the screen becomes black. If no button for more than one second, he made a continuous beep loud. If I select the option diagnostic Windows memory, it works up to 99% and then freezes.
  Looks like a failure of HARD drive for me?

  The laptop is old warranty so not more than 20 months.

  Hi Dr_Huuffuuhhrr,

  > If I choose the option diagnostic Windows memory, it works up to 99% and then freezes.
  Looks like a failure of HARD drive for me?
  Do you really think that it s a HARD disk if failure memory diagnostic freezes at 99%?
  Memory diagnostic tool is related to memory modules (RAM live) and no HARD drive.

  Theoretically, it could b related to the RAM, if you have already reinstalled Windows using the Toshiba recovery disc.

  You should check out some online shops for compatible RAM modules. You can change it yourself and as far as I know, you can find more information in your user manual. :)

• Satellite L100 no primer not if the WiFi is enabled

  Hello

  From the beginning, yesterday for the first time my husband connected its Satellite Pro L100 PSLA4E to a LCD TV using an s-video cable. Everything seems to work properly but thebackground on thedesktop had disappeared, there was just a white background combined with all the usual desktop icon. It has restarted the lappy thought it would be sort, but have not arrested the TV first. The lappy didn't start back up - just had a black screen Uni, no warning or anything like that.

  A couple of friends mind technology came at this time and suggested the lappy had "lost" his display drivers, and after a lot of research has decided the only option was to reinstall everything from scratch.

  I don't have the original Toshiba restore discs or recovery discs so downloaded all the drivers from this site. Now the laptop won't boot if the wifi is enabled. This model has a network card Atheros - at least the lable on low said contains Atheros AR5BMB5.

  If I turn the wifi on off switch the lappy starts every time, however, if the switch is on it will not start even in safe mode. If I turn on wifi after windows THAT XP has started up the lappy freezes and keyboard etc are out of order and I have to force a shutdown by pressing the power button.

  So far I have spent hours this trawling and other websites to try to find clues that could help.

  Does anyone have any suggestions as Christmas is likely to be hell if her husband has not his lappy to play with!

  Thank you very much in anticipation.

  Tree

  Hello tree

  After almost 10 years with Toshiba computers laptops, I would say that I have never heard of something like this. To me, this seems incredible.
  The best solution for you is to install the OS by using original Toshiba recovery image. If you do not have one you can order it.

  What you can try is to enter the BIOS at startup settings. Set it to default settings and check if the problem persists.

• Satellite L300D-13s, crashed and primer not

  I received an alert on my Toshiba L300D-13 s via Toshiba Tempro alerts to download the latest version of the BIOS updated. I downloaded the update and installation, during installation the PC crashed and froze completely lost power for about 30 seconds.

  Since this laptop will not start, power that the battery is and plug lights are turned on, also when I press the power button, the fan starts and the lights on the keyboard flash but then nothing. The laptop does nothing the fan works for a short period and then turns off.

  I'm not an expert but I think there must be something seriously wrong with her, any advice would be greatly appreciated. The laptop is still under warranty, so as soon as I get some sort of confirmation that presents a serious problem I can send it off for repair.

  Hello

  Thanks for the feedback buddy.
  I think that if the guarantee is valid then it s always advisable to get in touch with ASP in your country.
  Generally guarantee must cover everything!
  Guys might try to reflash the BIOS to the trad-BIOS version.
  This update of the BIOS can be done using a floppy disk, and doesn t need a running windows system!

  Welcome them

• HPE - 580t: can not find the voltage selector

  I am moving to Asia with my office and would like to change the voltage of 220v.

  HP web troubleshooting says there is a red switch at the back of the computer, but mine doesn't have. I found the computer label indicates the input voltage: 110-240v so.

  How can I change the power supply for the computer then?

  Thank you for your help in advance.

  Hello

  This model do not have an option to change the voltage.

  You may need to use a universal power cable to the wall socket.

  Kind regards.
  Rajesh K G
  HP Tech
  ***
  * Click on the thumb BRAVO upwards on the left say "thank you."
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

• After the closure of Windows XP on my medion Tower desktop computer it now primer not. The message I get is Retten.exe file not found.

  I have a Medion Tower Office that, like fine until this last time, I closed Windows and now won't start or switch to safe mode recovery mode, ect., the message I get is unable to find the retten.exe file. It will not allow even me to re - install Windows xp from the disk that came with the desktop computer. Can any help?

  Thank you

  Hello

  ·        You did changes to the computer before you shut down the computer?

  You can try to boot from the CD and perform a disk check, and check if that helps. You will need to change the boot order in the BIOS (Basic Input/output System) and check if that helps.

  Warning: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Start Recovery console, and then run the disk check. To start Recovery console follow the link below.

  http://support.Microsoft.com/kb/314058

  Note: To start the recovery console, you need the Windows XP installation CD.

  Once you start in the recovery console, follow the link to perform the disk check.

  http://support.Microsoft.com/kb/315265

  You may need to contact the manufacturer for support.

  http://support.medionusa.com/

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Processario Compaq SR1000 primer not.

  Hello. I have a Compaq SR1000 Processario of a neighbor who works with computers. He gave me 2 RAM of 256 MB or ram cards in each. One, the computer starts well. If I try to add another, it won't start at all. The fan comes in and custom actually start. With two cards, its up to 512 MB of ram. I would also like to know what kind of RAM card I can buy for the computer. I can provide photos of the hardwear internal computers. Please contact me via Skype or email. My Skype is mathman39999 and my email is [email protected]. Thank you if you help. I just want to know what I can add things to my computer in terms of ram cards.

  Hi ther may be a problem with this stick of ram, this can cause the machine does not start

  the type of ram you need is

  PC2700 - 333 mhz

• Compaq presario cq56 primer not.

  Model: Compaq Presario CQ56-219WM

  I've had the computer for only less than a year. When I press the power button, the computer starts, appears red 'Q', then 'hangs' on a black screen with an underscore flashing. I ran the diagnostic tests available and everything SEEMS fine, but it still does not boot past the black screen. Tried a hard reset, still no luck.

  Hello

  Assuming you are using Windows 7, try the following.

  If you do not, use another PC to create a Windows 7 recovery CD.  Download the ISO relevant among the links below - if you are unsure, your laptop is listed as having a 64-bit installation...

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  Demarrer start from the rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• Laptop Acer Aspire 4300 primer not with a bootable CD/DVD

  Hi, I am trying to re - install Vista Home Basic in my old laptop Acer Aspire 4330 2 years which is not initialized. He however start with a CD/DVD. Although trying to reinstall Vista he asks my prduct key, that I don't have, the lable on the botom of m computer cannot be read. I skip this option and receive an error code: 0 x 80070002. How can I fix this please?

  Thank you in advance.

  Please see: purchase Acer Recovery Media program Carey Frisch

• HP Pavilion Elite HPE-150uk - do not start

  Hi, I have a new (two weeks) HP Pavilion Elite HPE-150uk.  When I turn it on it gets insofar as the HP screen and then stops.  If I switch off and again this topic usuall starts and goes into Windows.  Although occaisionally after a reboot, I find myself with a black screen for several minutes before Windows starts.

  Is there a cure for the PC stuck on the HP screen?

  Thank you

  Robin

  Have you tried a BIOS update?

  You can always return the 150.