Profile of user will not, why download

Similar Questions

• Why can't I download apps? It remains on "buffer" / operation circle and will not start download

  Why can't I download apps? It remains on "buffer" / operation circle and will not start download

  See if the Restrictions are enabled > usage on your iPhone Restrictions

  If it is not a question of Restrictions, it could be a problem with the network settings on your iPhone.

  Tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password. Tap Settings > Wi - Fi

  Then try to download apps.

• Error message: the user profile service has no logon. Profile of user was not found.

  Just after that Microsoft updates yesterday we received the following message: the user profile service has no logon.  Profile of user was not found.

  The user is locked.  I tried the system restore, but the computer does not. I don't have a disk of Vista to re - install.  Peux-I re - install online?  I have the product key.

  Thank you

  Joe R.

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are running correctly.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

  LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

  Check your hosts file.  to help with this and more:

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

• How to open a document illustraor silently, so that the user will not see it

  Hi all

  I work with Illustrator CS5 and you want to import a picture (files HAVE) documents Illustrator in another document. When I tried event file-> place work file converted to pdf object. Are there other ways to import the work as it is in another file.

  A work around is: to open files in Illustrator, copy content to the Clipboard, paste it into the desired document layer, close document.

  But I need to open these documents in silent mode so that the user will not see them. Is there a method to open the illustrator silently files?

  Please report a solution or any suggestions would be welcome.

  Thanks in advance.

  
  D.

  Ok. To open a document in your own format in silent mode, you register your file using AIFileFormatSuite::AddFileFormat format. Then in the GoFileFormat Manager, you treat the document, and then return an error code, e.g. kBadParameter. The document never appears and Illustrator shows no error, but you treated the file data. You then extend this technique to work with the files have.

• Why edge Code will not be download?

  I uninstalled edge Code on the control panel after having difficulties. When I went to try a reinstall it tool creative cloud, he told me that it was downloaded again, even if it is not. I tried to download from the website too but it redirects me to cloud creative tool that won't let me not re-download edge Code.

  Can someone tell me please how to re - download edge Code?

  I do not know how to resolve this, but Edge Code is a re-branding of media (http://brackets.io), then you can try using that instead. Note that parentheses is updated more often edge Code, it has more features.

  Randy

• the user will not erase & isn't in Control Panel users

  If I go to C:\Documents and Settings, there is a user that I never had and want to get rid of. But this user has never been and is not present in Control Panel > users. If I try to remove it from C:\Documents and Settings, it starts with a box to confirm deleting file saying 'the file 'xxxxx' contains items whose name is too long for the trash. Do you want to permanently delete it? "I click Yes or Yes to all.

  Then he quickly paged home with a box titled error deleting file or folder that says "cannot delete the XXXXXXXXXXXXXXX: cannot find the specified file." Be sure to only specify the path and the correct name. I click on one button, OK, and I'm done. It will not erase. So I renamed this user ' broken but will not erase "other users on this list are administrator, Administrator.JEFF - A40763A256, all users, all Users.WINDOWS, by default, the User.Window default user, guest, Jeff.JEFF - A40763A256 (me). Not sure why mine has this weird kind of thing next to my name (?). In any case, I guess this isn't a problem.

  If I look in Control Panel > user accounts, I see that Jeff (Administrator) and comments - the guest account is disabled. These are the only two users ever.

  You can manage your startup to find out why your computer is experiencing difficulties of start and stop. Certainly I would test the hard drive.

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  Important - do not use the System Configuration utility to stop the process. Use rather Start > Run > services.msc [Enter] and stop all services unless you really, really know what you're doing.

  How to troubleshoot by using the Msconfig in Windows XP utility -http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup -http://www.microsoft.com/technet/sysinternals/default.mspx

  Clean boot in Windows XP -http://support.microsoft.com/kb/310353
  Boot minimum troubleshooting Windows XP - Advancedhttp://support.microsoft.com/kb/316434

  Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad).

  MS - MVP - Elephant Boy computers - don't panic!

• Task Manager Windows 'show all processes from all users' will not work

  Hi im running service of 64 bit vista Home premium pack 2

  For some reason any button "show all processes from all users" in the Task Manager will not work, when I click nothing happens, uac prompt little or nothing.

  I can end processes very do well no problem it's just the show all button that does not work, I thought that maybe the taskmgr.exe in my right-click system32 folder and compatiability tab and running it as admin it would work, but the compatiability tab is completely grayed out all I can't click anything in it.

  Im not a big computer wiz, but I checked my user accounts account im logged on says that it is the administrator and UAC is on.

  On a side note do not know if this has nothing to do with my problem but recently my computer has got contracted a Trojan horse that has infected the mrt.exe file, I had to delete, now I get an error during windows startup associated with mrt.exe works not properly. any suggestions how to solve this problem too

  Hello

  Make sure that the malware is removed completely

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  _____________________________________________________________________

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• iPad will not update/download apps or update of iOS

  I use an iPad Air 128 GB. A few weeks ago I opened to see 80 + waiting for app updates. It will not be to update all apps more, it seems. When I type "Update" next to the app, it will sometimes go to the Pan then immediately back "Update." Other times it will go to the loading circle with the "stop" square in the middle and stay there forever, without making any progress.

  It will be not as download apps from the store. The other day, I bought a new app on my iPad. The purchase went very well and the app is immediately available for download on my iPhone. But on the iPad, it had sat for always with a circle of empty progression. A gray icon on the home screen, but that's all.

  She can't do as iOS updates. When I check the updates, it breaks down after a few moments with the message "cannot control upgrade: an error occurred when checking for a software update. It also won't let me go back to iCloud. Well it's not quite true... When this all started, I got a backup to work once. But he has not worked since then.

  All this stuff always works through iTunes. Can I update iOS through iTunes (it started with 9.3, and I spent 9.3 - > 9.3.1 - > 9.3.2 via iTunes). I can install apps/updates via iTunes, and I can back up on iTunes. The other stuff related to internet on the iPad seems to work very well (web browsing, etc.). I also had none of these problems on my iPhone using the same exact account.

  I tried the standard things: reset the iPad, signature and in the AppStore, etc.. I tried to turn on all the app store/iCloud bells and whistles repeatedly. Nothing has worked. Any suggestion is appreciated. Thank you.

  Hello

  Looks like a bug go to settings - iCloud back up now.

  After restore backup iPad back to the factory settings, this will get rid of any bugs.

  Use the same apple ID installs back over your WiFi when you are asked if you want to use iCloud backup say yes

  To retrieve all your apps / data.

  I would like to know if it works.

  See you soon

  Brian

• Windows Update will not install downloaded updates.

  Win 7 pro x 64

  AVG AV worm: 9.0.869

  Zone Alarm Pro ver: 9.3.014.000

  Malwarebytes worm: 1.46

  SpyBot S & D worm: 1.6.2

  Ad-Aware Free (2010)

  This is my first post on this forum so excuse all the errors in the placement of the info.

  WU, MU will not install the updates downloaded or optional updates selected. No error code is given, it remains at 0% for as long I leave or I cancel installation. I tried to install individually in MS catalogue still will not be installed. This is a new computer that I built in July and punishment, it has not been used. It's strange because for the first three weeks of this computer, I had no problem with the installation of all available updates, or anything else. Then when the updates of August were available I chose all security updates and install optional updates that have already downloaded click on the button and nothing happened, it remained only on 0%. My question is, is there an update that was given earlier that caused these updates not installed? I really want to use my new computer, but I don't like to run without new security and the latest updates. I had trouble before what do.

  I used all the security software listed above on all my computers for about 5 to 10 years and non of them are set to prevent windows update from working.

  Please try another attempt to update, y d diddty. During the update installation fails again, close Windows Update.

  Open the WindowsUpdate.log and copy & paste in at least the last 50 lines or so, in your response, please.
  How to read the Windowsupdate.log file

  Meanwhile, suggest to configure Windows 7 to the clean boot and see if he can install updates in the clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  NOTE: in the Clean boot state ZoneAlarm will be disabled. Make sure that the native Win 7 firewall is now on in the Panel.

  While in the clean boot state, you can also try to download and Save the Fixit found here -How to reset the Windows Update components?
  Once the download completes close all open programs and browsers.
  Now launch Microsoft Fixit 50202.msi and choose the default mode.
  When it has finished turn the system reboot to clean it from same start State and see if updates can install now.

  If no joy, run the Fixit once more and choose aggressive mode.
  Then restart on the same State of clean boot and see if update succeeds now.

  Expert MowGreen Windows IT Pro - consumer safety

• My security settings will not allow downloads in XP?

  I can't download the wind. Defender or anything else every time I try to it is some updates or other things that I get this box in front of one that says RUN saying that my security settings will not allow the download? but I dug and searched and parameters of chaunged that I can't find anywhere to change a set. for loads below except that I want to be the one who he oks 1 /? Please help because I need help virus etc. Thank you Patti

  Hi Patti,

  Try to reconfigure your virus scanner - as appropriate. You can also try to reset and restore the settings of internet explore. To do this, close all open them IE Pages - click on Start-> settings-> Control Panel-> Internet Options-> Advanced-> click on Reset and restore - Tickmark to remove personal settings when prompted.

  I hope this helps.

• picture of Windows will not camera download

  Windows will not download pictures from my camera more, he says, he does not scan.

  Hello
   
  You execute the steps suggested by Volunteer J, from the link below?
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/Windows-Photo-has-stopped-importing-pictures-from/e044aedb-e7b9-467B-8c2d-1d879457eb41
   
   
  If so, then share the results with us.

• ITunes will not start download

  I am trying to download iTunes on my laptop, I have windows 8 and my computer meets all the requirements to download iTunes. However, when I try to download it nothing happens. iTunes does not start download or whatever it is he isn't even a message at the bottom of my screen asking me to run or save a file exe also occasionally when I try to download internet explore just stops working. Help, please

  What utility Antivirus you have installed? Have you tried to disable it temporarily and and see if they work?

  Have you tried to save the download to a different location on the hard drive such as the desktop?

  Have you tried using another user account?

  What type of Internet connection you are on, wired or wireless? If you are on a wireless connection, try switching to a wired connection and try the download.

  Press the Windows key + X

  Click prompt (Admin)

  At the command prompt, type the following command, press ENTER.

  ipconfig/release

  then

  ipconfig/renew

  then

  ipconfig/flushdns

  leave the command prompt

  Press the Windows key + R, type: folder

  Press enter

  Delete the contents of the temp folder

  Restart the computer and try to download again.

  If the problem persists, try resetting your router if you are connected to one.

  Turn off the router, unplug it, wait 10 minutes

  Plug it in again, power up once again

  Reconnect the Ethernet cable

  Try to download again

  Trying to download iTunes again, but instead run the installer from its current location, try saving it to your hard drive and then run the configuration file.

  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/ht1926

  iTunes for Windows Vista or Windows 7/8/8.1: troubleshooting...
  http://support.Apple.com/kb/ts1717

  You can try both uninstalling and reinstalling as a new user to see if that helps:

  http://Windows.Microsoft.com/en-us/Windows/create-user-account

  If this isn't the case, I recommend you contact Apple for assistance.

• fuse will not accomplish download

  I tried to download and install Adobe fuse overview several times, but it will not complete the download process and stops at 42% each time. What's not?

  Kindly try to troubleshoot Adobe Creative Cloud install problems with log files

• Folio will not complete download to Adobe Content Viewer on iPad

  I work in InDesign 2014.2 Windows and using the most recent version of the viewer Adobe Content (as of 24/11/15) on the iPad. He sees the folio (unpublished) that I created and some items are appearing. But other items will not complete the download process. They say just 'pending' or 'preparation '. They never get beyond, even after 24 hours. I tried to restart, signing in and out of InDesign and Content Viewer with no luck. I am able to view the full folio in the viewer of content on my desktop and my colleagues are able to download the full folio on their iPads without problem. How can I fix?

  I deleted the Adobe Content Viewer app from the iPad and reinstalled. He is currently working.