Profile of Vision Builder AI 2011 online

Similar Questions

• Cannot acquire image with NI1744 using the interface configuration of Vision Builder AI 2011: error-1073774588

  I use a 1744 OR with NI Vision Builder AI 2011. When I'm in the interface of the inspection, the camera will acquire and display an image. When I go to the configuration interface and try to put in place the stage of image acquisition, I have error-1073774588: the undefined error. I sometimes also 1074396159 error: not enough memory.

  Thank you for your repply Burrito.

  The problem was sloved and two errors went away after I formatted the camera and reinstalled the software on the camera.

• default transition in vision Builder

  Hello

  I am a new user of Vision Builder AI 2011 and have a question about the transitions between States (default).

  In a testapplication I build for different features of Vision builder I want to create 3 States, each consisting of a series of tests. It works without problem.

  But the problem starts when I want to put an end to the test during one of the inspectstates does not pass. To do this, I added 3 (fault) specifies in which I put an overlay so that the reason for the "failure" becomes visible. The transition to these States 'fault' is changed so that the transition is only used when the above report fails. Each of the 'fail' states has a transition directly to the outcome.

  The problem I encounter is that, even when any of the tests fail, the program works always true all the other tests.

  Reason (I think), it's that I can't change the default transitions (ranging from inspectstate to inspectstate). And seeing that you cannot delete or change the default reports I can't find the solution to this problem.

  I've considered adding another transition between the inspectstates and to change this transition, but what to do with default transitions?

  Contribution to this issue would be greatly appreciated. I only started working with Vision Builder, but I see endless possibilities, if this problem is solved.

  Thank you

  Tom

  Hello

  After having a quick glance at your program, it seems that everything is OK, (as you did not provide the images, I just looked after the transitions).

  Your transitions are good, so if an error occurs in a processing status, go to the final State, and other States will not work.

  But what make you think that other States are good that the program doesn't run?

  You can run your sript in Setup mode after adding a delay in all States. You will then be able to see in schema view that pass are valid or not.

  Concerning

• Migrate from Vision Builder for LabVIEW 2011 2012

  Can I migrate LabVIEW 2011 Vision Builder AI 2012? Or I have to install LabVIEW 2012?

  Nope. If you have the Vision builder AI 2012 it supports LabVIEW 2011:

  http://digital.NI.com/public.nsf/allkb/A2639FCFCCB2A8B086257FA300559827

• Version of LabVIEW for Vision Builder AI 2012 plugins

  Hi all

  II was a little challenging to find out what version of LabVIEW has been necessary to develop customized Vision Builder AI 2012 plugins, I found it by starting the installer, LabVIEW 2011 (but I wish I could find this information in the Readme of Vision Builder AI 2012).

  Now my question is: is it possible to use LabVIEW 2011 SP1 to develop plugins for Vision Builder AI 2012?

  Right... I tried, I installed all versions VBAI and LabVIEW, I could.

  I turns out LV 2011 sp1 is just an update of 2011 and so LV2011 SP1 can be used to develop customized Vision Builder AI 2012 plugins.

• Vision Builder for Automated Inspection Development Toolkit missing / cannot install in 2012

  I try to install the VBAI SDK.  I have licenses and have installed:

  OR LabVIEW 2012 Professional Version

  Toolkit OR Vision

  OR in real time

  I find not all options in 2012 LabVIEW for the VBAI dev kit so I tried to run the install and it says:

  "The Vision Builder for Automated Inspection Development Toolkit requires LabVIEW 2011 be installed, please install LabVIEW 2011..."

  Why can I install it on LabVIEW 2012?  2012 is out for 1 year... How VBAI does not support LV 2012?

  Should I install Labview 2011 to make this work?  I don't have the DVD for 2011 so it will be a royal PITA to install.

  

  Hello

  > Why can not install it on LabVIEW 2012?

  VBAI 2012 is a LabVIEW application that was built with and require runtime LabVIEW 2011.

  The VBAI SDK, just like the run LabVIEW stage, require the same version of LabVIEW VBAI was built with.

  We could technically remove this limitation under Windows, which would have implications serious performance the performance of the custom steps, but many customers who design custom steps also want to do on targets from a distance (for example smart cameras, EVS or CVS). Currently, it is not possible to support several facilities next to LabVIEW on real-time targets. For this reason, we have decided to only support that has the version of LabVIEW VBAI.

  Please contact your sales representative OR to get a copy of LabVIEW 2011 you need for the SDK.

  The next version of the VBAI (2013), support 2012 LabVIEW for the SDK and run LabVIEW steps.

  Best regards.

• Control of a system of engine not to not 2 - axes of Vision Builder

  Hello

  is there a way to control 2 Motors step by step via Vision Builder?

  What are the components do I need?

  BR,

  Klaus

  Hello knuemm,

  There is no action, which allows to directly control the player. It depends on your hardware configuration, some engines step by step has a serial interface and also the device the vbai is running on other devices of movement has a digital input and some vbai devices have outputs digital that may be used for this.

  Fleeing a LabVIEW VBAI Inspection

  I followed the smartcam NOR control pilot Motion

  You can also create steps for the VBAI to run LabVIEW code

  NEITHER Vision Builder HAVE Development Toolkit

• Vision Builder 2013 DURATION: Selection of Inspection

  VBAI2013 I would like to insert a step of selection of inspection in the selection state of inspection which applies to the system on which the Vision Builder is installed and not to individual inspections. Therefore, it is not possible to how in the Version of the Runtime-license-where to add the steps?

  Thanks in advance.

  The steps for product status select are saved in the "Vision Builder system Config.ini' in the folder VBAI. You should be able to copy this file to the machine with the runtime version and if it has the same version of the VBAI, it should be able to apply all the steps and the INI settings.

  Hope that helps,

  Brad

• Integration of third party Vision Builder C++?

  Hello
  A customer of ours uses NI Vision Builder in an application and questioned on the possibility of integrating our algorithms with her exclusive image processing.  Our code is a C/C++ library.

  I did some reading and downloaded the eval package, but it is not clear to me if this is allowed with the product.  The defined C API allow access to built-in functions, but I've not seen an obvious way for third party algorithms to access images or add new features.

  Vision Builder only supports it the algorithms or can developers add custom product image (in C/C++) processing algorithms?  Thank you.

  Hi eepdx,

  VBAI is not a contribution to the third-party code integrated directly in the script. And you are right about the C API.

  You can use the range of Vision Builder AI communications to communicate with the C++ application. Or you could translate your final VBAI script by LabVIEW code, then, LabVIEW can call a dll, so you could create a C++ application dll and call it from the LabVIEW code (it would be more complex).

  I hope this helps.

  Daniel C.

• NEITHER Vision Builder built exe does not have logging.

  Hello!
  I did have an application with NI Vision Builder, and the executable version does not save the log file. During the test it or vision, she recorded when I migrate to labview it records, but when I build the executable file, which does not have logging. What could be wrong?

  Thanks for your replies, the solution was easier than I thought. There is no problem with the path or something like that. The problem is that I checked the box for "Log in the background", and (I think) it is not a program, which could run this step. So I unchecked that and now it creates the log file that I wanted to.
  Once again, thank you for your quick response!

• vehicle followed by using vision builder

  Can someone help me to follow a vehicle using vision builder?

  The object tracking feature to track multiple objects.

  To do exactly what is shown in the video, where the number of cars is variable, you must use the LabVIEW module and the development of the Vision to have more control over the creation of objects. (The limitation with Vision Builder AI, is that each object to track is associated with a follow-up session, so you should know in advance how many object you must follow, but VBAI to track multiple objects).

  The principle I described should be the same in LabVIEW: detect somehow the new car which comes within the field of vision and learn at this time where the object so that it can be followed. The prerequesite should be that you need to know where to detect them the car that comes in the field of vision. The difficult part of the application must define the area of interest of the new object that you want to track.

  The LabVIEW example for tracking of objects can be found here:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2014\examples\Vision\Tracking\Object Tracking.vi

  Christophe

• NEITHER Vision Builder to tiara

  Hello NOR the community.

  I built a system to measure through NI Vision Builder. Now I can record the measured data (only!) in a *.csv or *.txt file.

  I want to import the data measured in DIAdem automatically.

  Is there a better way to do it? Is there a direct Interface between the 2 software systems?

  Thanks in advance!

  Hi Steffen,

  When you install DIAdem you are also automatically installing a separate program, called "My DataFinder", which is a database and indexing service.  The tiara and "My DataFinder" use the DataPlugins even index of load/data files.  When you complete a session of text use wizard, it creates and registers a use in addition to load the data file into the data portal in DIAdem.  The idea is that eventually DIAdem both the DataFinder can use the use that you created for the load index / all similar data files.  In practice, the use you get from the Assistant is often not ideal for use with a variety of similar data files.

  My initial inquiries indicate that ASCII files, you are already creating the best leads that we have between Vision Builder and tiara.  The marketing director of DIAdem is now advocating for options in future versions of Vision Builder who could provide a superior connection.  For now, however, I think our best bet is to outfit you with strong DataPlugins which will provide drag & drop of loading in the NAVIGATOR tiara as well as automatic indexing to the DataFinder database.

  So, could you post some of the ASCII files you created with Vision Builder?  I would be willing to create a use or a set of DataPlugins that should give you the basic data functionality and connectivity you are after with DIAdem.  Or you could send to [email protected]

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• vision builder to labview migration

  Hello

  I have a project of vision. Pluggable VISION BUILDER pour image processing and the LabVIEW pour interfacing.

  My question is: how to call an inspection done by VISION BUILDER in the LabVIEW software.

  NB: I found in the Tools menu of VISION BUILDER a feature titled "Migrating to LabVIEW. but she could not be executed because I don't own

  the DEVOLEPMENT VISION MODULE. Have to buy another software OR (VISION DEVOLEPMENT MODULE) pour fix my problem? : smileysurprised:

  Thanks in advance

  Hello

  Vision Builder is provided with an ActiveX control that you can call from LabVIEW. You will find enclosed a few Directory promotion the in examples

  \

  The ActiveX component allows to control Vision Builder as you would you interface greengrocers. Once you have created your inspection in Vision Builder, you can use the ActiveX component to connect a Vision Builder of LabVIEW, open an inspection, execute, recover and display the image (you need not purchase the Vision Development Module pour it), and get the results of inspection and each step of the inspection.

  Hoping that this answer has your expectation

  Kind regards.

  Christophe

  OR R & D Vision

• NEITHER Vision Builder, acquire Images with fake delivery

  Hello world

  I am a student and I work as a trainee in a company, which produce helmets.

  To control the quality of helmets, there is a Webcam, wich take pictures of each helmet product.

  These Images are saved on the server. With the tool 'Simulate delivery', I can analyze the images, which are now in the folder.

  But when a new Image is the drop in the folder, I actually start the inspection again.

  How can I realize that NI Vision Builder always takes the current Images in the folder?

  Thank you very much for your help!

  Best regards

  Romain Menz

  Here is a simple example that illustrates how to dynamically read the images from a folder. Once the image has been retruned to VBAI, the image file is moved to a subfolder called Complete, so he has not read again the next time step is called. Step returns an error if there is not more images of the file type in the folder.

  Hope this helps,

  Brad

• The DALSA X 64 - YEAR QUAD Framegrabber is compatible with Vision Builder AI 3.6

  Hello

  I think use the DALSA Framegrabber with 4 camera inputs. I was just wondering, if this framegrabber is compatible with the Vision Builder AI 3.6?

  Thank you

  The only framegrabbers directly supported by VBAI that are produced by National Instruments, see http://sine.ni.com/nifn/cds/view/main/p/sn/n32:frameGrabber / lang/en/nest/1286/ap/vision.  If your application requires three or more cameras, I would suggest using a pair of PCIe-1430 framegrabber with Camera Link cameras, PCIe-8235 with cameras GigE or using a firewire camera configuration.

  -Robert