Profiles BlueTooth scale and the GATT

Similar Questions

• Is it possible to hear a Bluetooth speaker and the internal speakers at the same time on the iMac with OSX 10.11.2?

  Is it possible to hear a Bluetooth speaker and the internal speakers at the same time on the iMac with OSX 10.11.2?
  I can only have my Bluetooth speaker on or my internal speakers on my outings Sound System Preferences.
  Is it possible to have both of them at the same time?
  Thank you for your patient

  To my knowledge, no.

  Barry

• I can not find bluetooth icon and the device on my laptop

  I can't find bluetooth icon and the device on my laptop - HP550 - Windows XP, so not able to connect all devices.
  Even I checked the Bluetooth Services on my PC by method "services.msc", but I can't find bluetooth written on the list.

  Please help me because I want to transfer files via bluetooth.

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. have there been recent changes to the computer before the show?

  2. you get any error message?

  Please go ahead and consult the methods mentioned below and later a update on the State of the question.

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2: Troubleshooting Wireless and Bluetooth problems.  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/keyboard/wireless-Bluetooth

  Method 3: How to troubleshoot Bluetooth detection and connectivity problems in Windows XP Service Pack 2: http://support.microsoft.com/kb/883258

  For your reference: How to install and configure Bluetooth devices in Windows XP Service Pack 2: http://support.microsoft.com/kb/883259

  Follow these recommended steps and after if you still experience the problem.

• You can control volume with bluetooth headset and the new Apple tv?

  Hello community!

  I have a new Apple TV and I'm watching tv and movies series, but the only way I can do it is night. I don't want to disturb my family, so I was wondering if I can watch it with a bluetooth headset and control the volume. What I mean is if I can have a very low volume on the TV but more volume on my headphones. I can do with my PS4, but I have most of my movies in iTunes.

  Thanks for any help you can provide.

  You cannot output audio to the tv and the headphones at the same time if that's what you're asking. However, you will be able to control the volume of the headphones using the distance of Siri.

• Change the scale and the legend of an indicator

  I create a VI shows the current temperature and the speed of the wind on 2 separate indicators. I added a two 'select functions' button controls to convert the readings between English and metric units. No problem. Now I want to change indicators it legend and rank (minimum and maximum values) also when the key is toggled. So if I push the button to select the metric values for these readings of the scale values and the legend are changing too. Thanks in advance for the help.

  [email protected]

  Right-click on the indicator, then press on "create the property node >.

  Then select the following properties:

  

• How to get the name of the bluetooth device and the name of the bluetooth device address device class?

  Hi all

  Can I know how to get the bluetooth device name and the name of the bluetooth device address device class?

  Example:-if my bluetooth device address is :-98:EB:CD:01:1F::90 then how do I get my bluetooth device name?

  I hope you understand my problem. Let me know as soon as possible.

  :

  Thanks for the reply.

• The scale and the relationship between the problem of points

  I had a few problems with setting the scale of the objects and their appearance before and after the scaling.

  The relationship between the points change when I change things, and it's a little embarrassing.

  Before that I put across that circle with an arrow, it looked like this:

  

  Then after that I put across it, the lines on the arrow were not in place:

  

  It happens very often when I am scaling of paths in illustrator. Is there something I can do to prevent it? Often I make things evolve upwards or downwards and it is a little painful when I know I'm going to screw up the path.

  

  

  Go to the drop down at the top right of the Panel processing and disable "Align new objects to the pixel grid."

  Edit: If you select 'Web' in the new Document dialog box, "Align new objects of pixel grid" is enabled by default, at the bottom of the box. You can choose to disable it there before OK-ing the creation of the document.

• Graphic intensity scale and the Transformation of coordinates

  Hi all. First post ever so please bear with me. I'm trying to plot the data that I am buying a load cell in coordination with the X - Y position, I get my motion control system. The news of load cell must be the z axis. I'm receiving the order of movement data, then acquire the load cell signal on average and store them in a table. I would like to plot these data for each movement of x and there axis so that I can see a real-time mapping of the data that I have gained. I joined a program that computes XY positioning required with load cell data simulated by a random number. Drawing the x - y graph coordinates XY is the standard path measurement I use. I wish that the graph of the intensity to draw the same way with the correct details used on the axes. If I could put the xy graph and the graph of the intensity, it would be a major bonus. I can't wait to hear any response that helps me on this one. Thank you in advance for your time and effort. Only, I'm stumped on this one!

  Keith

  I'm sorry. Realized that I do not understand a Subvi. Deleted so the program should work if download you it directly. Just a few notes: Spray size in inches and normally between 2 and 20 inches, degrees lateral spray angle is normally between 10 to 45 degrees. Angle of transverse jet is normally between 2 to 10 degrees. Pin diameter is in inches and usually falls 0, 020-0, 080 range.

• Acrobat pro, 11 measurement tool, how to adjust the scale and the style?

  Using the measure tool, it gives me the paper measures don't design not the actual measurement in the field, in previous versions, there is a way to adjust that.

  Hi gadl15,

  Please see this KB doc. helps Acrobat | Grids, benchmarks and measures PDF files aid.

  Kind regards

  Nicos

• I have pictures of underground anomalies reflection profiles, I want to put a measure of scale along to the and the side of the image. How I do that in a picture?

  I'm thinking GPR profiles which must have the scale placed along the top and side of the image borders.  I need to crop the image, given that the existing software has its own scale that I can't use.  I need to place the image on a neutral background cultivated have space to add text, such as the direction of the movement, magnetic north, information. Im going to try to * a copy of the image that I have for example.  Although I want to learn how photoshop works I need to get this out of the way.  You will also need to understand how to assemble the images since some reflection profiles are longer than what can show the soft ware GPR.

  

  I would create a shape layer that contains your ranges. I make a separate scale for each side and have the scale longer that you need so you can use it with different images. Before you crop or resize, I bring in leaders and their reference of scale scale that you ever image before cropping. Then put the scales in a dynamic object and the harvest, ensuring that you remove cropped audited pixels. This will be crop your original image, but areas of scales that fall outside the area of culture will not be deleted, because they are in Society. Once crop you, if the image is a background image, change it to a normal layer by clicking on the lock icon in the layer panel. Now you can use the size of the canvas to add the amount of the borders you want around your image. You can create a United below your main image fill adjustment layer and choose what color you want the background to be. Then, you can move your scales where they should be. Use a mask for the scales if they are too long. Most of this can be implemented in action so that you don't have to manually do each step. The scales are fairly easy to do using the line shape tool. Just create a single line and duplicate many times you need divisions in your balance. One of the fixed lines at the beginning of the scale and the other at the end of the scale and select the layer with the line and use the distribution with the move tool function to space out the lines. Transform a part of the major subdivision to longer lines and add text. Here is an example of a scale, I did for my work:

  

• DUN connection Bluetooth for Pocket PC, Vista and the user rights restricted

  Hallo,

  I managed to establish a DUN connection to my smartphone WM5 Pocket QTEK 9100 Bluetooth-based and the Toshiba Stack, latest version. My laptop is an X 200 - 21 d with Vista Home Premium.

  Everything works although I do not change the Vista user to a user with restricted rights, for the user with the Bluetooth utility administrator rights has created a new DUN connection and a new modem with a virtual COM port. The user with restricted rights is not allowed to set up a new connection, but it is necessary to connect to the smartphone with the Bluetooth utility. On the administrative account the option button to allow the connection to call other users is disabled and grayed out, so there is sort now open it up to other users.

  How can I set up a Bluetooth DUN connection for a user with restricted rights?

  Thank you in advance!

  If the user restricted use the same DUN like the Admin Setup?

  If Yes, then you can use "Bluetooth-> custom Mode settings". This allows you to
  Select the "Standard 33600 Modem" from the list that has been set up before
  the admin. So every ONE that has been configured by the administrator can be used by the
  User restricted with this method. Restricted users cannot install hardware, so
  If the administrator has not installed a modem, then also the restricted user cannot use it.

  The Admin can pre-install a modem with Bluetooth stack installation.
  This is useful if the restricted user should be able to configure a DUN connection
  with the advanced modem settings which are not used by the administrator.

  This should be possible if the file "as.ini" has a line "MODEMINST = 1".

• How can I check the voltage values on the acquisition of data with a data acquisition assistant and the custom scale?

  I use a custom scale and the DAQ assistant to acquire data from a USB DAQ device.  How can I display voltage gross values at the same time?

  Thank you

  David

  Do not use the ladder custom, but read the raw data using the daq assistant and adapts the data later. Or the scale of the data using the inverse of the custom scale.

• How do I return the scales on the Mixed graphic Signal?

  LV 8.6.1f1

  OK, so I look at the relatively new chart of MIXED SIGNALS to fix things that don't work on the regular chart (more precisely, the weird cursor behavior).

  It seems I have a slider that spans four plots and reads an X 4 values of Y, that's what I want.

  But I need ladders on both sides.

  I tried to create the 2nd scale and the SIDES exchanged with her and got this:

  

  There is no ladder on the right?

  Or is it?

  These graduations few are a clue.

  I so stretch the right side of the chart and guess what?

  There is the scale:

  

  In other words, the new graphic scale left anywhere on the screen, even if I resize the chart horizontally.

  I can move the chart, the scale moves with him.  I can re-size on the left, and the left scale shows the same effect.

  It seems to me that graphic scales must be attached to the plot area.

  This graph is a TAB control, maybe the problem is related to this error of LabVIEW.

  Or am I missing something?

  Here is the code I ended up with difficultytowork around this problem.

  Mixed-Signal graph has ANOTHER problem where he completely forgets your assignments whose plots go on the scales, but that's another story.

  In my case, I've already placed the scales on the sides left / right as needed.  It's just that the right bottpm scale, really, really wants to be off to the right.

  What I do here, it's fetching the LIMITS of PARCEL of land #0 (the top one).

  I'm only interested in the left-right axis, I don't have a problem vertically.

  Also, I extract the AREA of scale 0-WIDTH WIDE.

  I then adjust the YSCALE. LEFT property of the four scales, place them where I want.

  The two scales on the LEFT are the BOUNDARIES of the PARCEL. -LEFT (WIDTH + 1 ON THE SCALE)

  The two scales on the RIGHT are to DRAW the BOUNDARIES. RIGHT + 1

  The "+ 1" means there are a pixel between the scale graduation mark and the border of the chart itself. I think it's better.

  Just run the VI once to run this code, then turn off the code section and save the VI. (You do not need to run it again unless something changes, he seems to remember where it is supposed to be).

  Of course, if you resize the graphic, you will need to run the patch again.

  

  

• Bluetooth and sensor Tag Texas: list of services of the gatt evil?

  Hello

  I have some experience with my Dev C ALpha and the Texas sensor tag.

  In fact I am following this guide: https://www.bluetooth.org/en-us/Documents/Bluetooth%20SIG%20developer%20Training%20day%20-%20Woolley...

  I would like the list of all the services available on the sensor Tag

  I have a function within my app that does something like this:

  the initialization of the BT
  {if (bt_device_init (ApplicationUI::btEvent)==0)}
  qDebug()< "device="" init="">
  If (bt_ldev_get_power ())
  bt_ldev_set_power (true); turn on the bt
  {if (bt_gatt_init(&m_gatt_cb)! = 0)}
  qDebug()< "gatt="" init="">
  }

  searchLab-> setProperty ("text", "investigation of departure!"); a label

  {if (bt_disc_start_inquiry (BT_INQUIRY_GIAC) == 0)}
  deviceCount int = 0, i, z;
  bt_remote_device_t * remote_device_array = bt_disc_retrieve_devices (BT_DISCOVERY_CACHED, & deviceCount);
  QString newDevs is QString ("devices found % 1") .arg (deviceCount);.
  searchLab-> setProperty ("text", newDevs);
  {if(deviceCount>0)}
  for (i = 0; i
  devName char [256];
  bt_rdev_get_remote_name (remote_device_array [i], devName, 256);
  qDebug()< "found:="" "="">< devname="">
  const bt_remote_device_t * found = remote_device_array [i];

  If (bt_rdev_get_type (found) == BT_DEVICE_TYPE_LE_PUBLIC) {}
  {if (bt_rdev_pair (found)! = 0)}
  qDebug()< "failed="">
  }
  char * gattServices = bt_rdev_get_services_gatt (found);
  qDebug()< "...services="" for:="" "=""><>

  {if (gattServices)}
  z = 0;
  {while(gattServices[z]!=null)}
  qDebug()<>
  z ++ ;
  }
  } else {}
  qDebug()< "no="" gatt="" services="">
  }
  break;
  }
  }
  bt_rdev_free_array (remote_device_array);
  }
  }

  } else {}
  qDebug()< "device="" bt="" init="">
  }

  This code for a Bluetooth device search THE autour and he's trying to list on the console of each service on the devce.

  The result is:

  Looking for services for: SensorTag
  0 x 1800
  0 x 1801
  0x180A
  0XF000AA00-0451-4000-B000-000000000000
  0XF000AA10-0451-4000-B000-000000000000
  0XF000AA20-0451-4000-B000-000000000000
  0XF000AA30-0451-4000-B000-000000000000
  0XF000AA40-0451-4000-B000-000000000000
  0XF000AA50-0451-4000-B000-000000000000
  0xFFE0
  0XF000AA60-0451-4000-B000-000000000000
  0XF000FFC0-0451-4000-B000-000000000000

  I have 2 problems:

  1: it is necessary to Pairing? If I try to use a Linux bluetooth usb dongle by following this guide: http://joost.damad.be/2013/08/experiments-with-bluetooth-low-energy.html it works and there is no need to make matching Tag and Dev Alpha C sensor... If I don't pair the devices... I have 0 return services.

  2nd: running the unit with the order explained here http://joost.damad.be/2013/08/experiments-with-bluetooth-low-energy.html I have these lists of services

  handle attr: 0x0001, grp end handle: 0x000b uuid: 00001800-0000-1000-8000-00805f9b34fb
  attr handle: 0x000c, fiberglass end handle: 0x000f uuid: 00001801-0000-1000-8000-00805f9b34fb
  attr handle: 0 x 0010, grp end handle: 0 x 0022 uuid: 0000180a-0000-1000-8000-00805f9b34fb
  attr handle: 0 x 0023, grp end handle: 0x002a uuid: f000aa00-0451-4000-b000-000000000000
  attr handle: 0x002b, fiberglass end handle: 0 x 0035 uuid: f000aa10-0451-4000-b000-000000000000
  attr handle: 0 x 0036, fiberglass end handle: 0x003d uuid: f000aa20-0451-4000-b000-000000000000
  attr handle: 0x003e, fiberglass end handle: 0 x 0048 uuid: f000aa30-0451-4000-b000-000000000000
  attr handle: 0 x 0049, fiberglass end handle: 0 x 0054 uuid: f000aa40-0451-4000-b000-000000000000
  attr handle: 0 x 0055, grp end handle: 0x005c uuid: f000aa50-0451-4000-b000-000000000000
  attr handle: 0x005d, fiberglass end handle: 0 x 0061 uuid: 0000ffe0-0000-1000-8000-00805f9b34fb
  attr handle: 0 x 0062, fiberglass end handle: 0 x 0068 uuid: f000aa60-0451-4000-b000-000000000000
  attr handle: 0 x 0069, grp end handle: 0xffff uuid: f000ffc0-0451-4000-b000-000000000000

  It is different from my request... why?

  Thank you

  1 matching is not always necessary. It depends on the device. What you should do in general is to go into settings Bluetooth on your BlackBerry and when you see the Tag TI sensor for the first time, select it. If you are required to enter a PIN, you will need to at this point. The status of the device in the settings must now move on to the connected mode or matched depending on whether or not he had a PIN. Other devices in the list will probably have a status of 'Saved' which means that they have been connected to or matched with previously and their details recorded in the cache device Bluetooth BlackBerry. If a device is in the correct state (connected or combined) in the list of parameters, then you need to perform a pairing programmatically.

  2. regarding your apparently different service lists, they are in fact equivalent. I'm interlaced the BlackBerry API output with that of your Linux tool below:

                                                                                0x1800
  ATTR HANDLE: 0x0001, END GRP HANDLE: 0x000B UUID: 00001800-0000-1000-8000-00805F9B34FB
  
                                                                                0x1801
  ATTR HANDLE: 0x000C, END GRP HANDLE: 0x000F UUID: 00001801-0000-1000-8000-00805F9B34FB
  
                                                                                0x180A
  ATTR HANDLE: 0x0010, END GRP HANDLE: 0x0022 UUID: 0000180A-0000-1000-8000-00805F9B34FB
  
                                                                           0xF000AA00-0451-4000-B000-000000000000
  ATTR HANDLE: 0x0023, END GRP HANDLE: 0x002A UUID: F000AA00-0451-4000-B000-000000000000
  
                                                                          0xF000AA10-0451-4000-B000-000000000000
  ATTR HANDLE: 0x002B, END GRP HANDLE: 0x0035 UUID: F000AA10-0451-4000-B000-000000000000
  
                                                                           0xF000AA20-0451-4000-B000-000000000000
  ATTR HANDLE: 0x0036, END GRP HANDLE: 0x003D UUID: F000AA20-0451-4000-B000-000000000000
  
                                                                           0xF000AA30-0451-4000-B000-000000000000
  ATTR HANDLE: 0x003E, END GRP HANDLE: 0x0048 UUID: F000AA30-0451-4000-B000-000000000000
  
                                                                          0xF000AA40-0451-4000-B000-000000000000
  ATTR HANDLE: 0x0049, END GRP HANDLE: 0x0054 UUID: F000AA40-0451-4000-B000-000000000000
  
                                                                          0xF000AA50-0451-4000-B000-000000000000
  ATTR HANDLE: 0x0055, END GRP HANDLE: 0x005C UUID: F000AA50-0451-4000-B000-000000000000
  
                                                                                 0xFFE0
  ATTR HANDLE: 0x005D, END GRP HANDLE: 0x0061 UUID: 0000FFE0-0000-1000-8000-00805F9B34FB
  
                                                                          0xF000AA60-0451-4000-B000-000000000000
  ATTR HANDLE: 0x0062, END GRP HANDLE: 0x0068 UUID: F000AA60-0451-4000-B000-000000000000
  
                                                                           0xF000FFC0-0451-4000-B000-000000000000
  ATTR HANDLE: 0x0069, END GRP HANDLE: 0xFFFF UUID: F000FFC0-0451-4000-B000-000000000000
  

  The reason why some of them are "short" is that the two 16-bit 128-bit UUID and UUID are defined and the specification defines a UUID of base to convert 16-bit versions in the 128-bit versions. It is probably making your Linux tool.

  Concerning

  Martin

• Looking for Toshiba bluetooth SDK (with the HDP profile)

  Hello

  I asked bluetooth SDK 2 months ago, and I have no answer.

  I would like to develop an application (for academic purposes) to establish a connection with an A & D blood pressure monitor by using the bluetooth Thosiba stack and the HDP profile. Anyone developing any similar application? Is there a person with Bluetooth SDK I can contact?

  Thank you
  Santiago

  Have a look here:

  Perhaps this page can be useful if you need the SDK software Toshiba Bluetooth Stack
  [Request for Toshiba Bluetooth Stack SDK | https://aps2.toshiba-tro.de/bluetooth_sdk/Bluetooth.aspx]

  I hope this helps!