Program CD not recognized by Satellite A50

Similar Questions

• RAM is not recognized on Satellite L650-1MC

  Hello guys

  I have a Toshiba Satellite L650-1MC with an i5 480M CPU and 4 GB DDR3 PC3 - 10600 (2 x 2 GB modules). Today, I got a 4 GB of DDR3 PC3-8500 module to upgrade the RAM 6 GB. I put this new module in and he was not recognized, perhaps because it was PC3-* 8500 * not * 10600 * like the original other two modules.

  However, when I tried to put one of the modules of 2 GB DDR3 PC3 10600 original in once again, he was not recognized or the other! I then left the second empty slot, with nothing in it, and he acknowledged the 1 module 2 GB in there. Do you intend the PC3-8500 module "corrupt" the memory slot, or is it not positioned properly, as seems to be slotted into a fine; It will not move.

  I would really appreciate your help

  Tom

  Hello Tom

  There must be a compatibility problem. Forum is filled with similar reports. You should only use compatible and tested modules.
  I highly recommend to use modules from Kingston.
  Compatible RAM for your laptop model you can find on http://www.ec.kingston.com/ecom/configurator_new/lines.asp?root=uk&LinkBack=http :// www.kingston.com/ukroot&Manufacturer=tos&search_type=

  If you need assistance, you are prompted.

• Not recognized on Satellite 3000 514 Notebook memory intermittedly bench

  At the start of my satellite 3000-514-Notebook, which contains 2 banks of memory of 256 MB each, the upper 256 MB Bank very often is not recognized more, and my laptop runs on 256 MB only. Initially, this happened only when I started in hot condition, while that morning, all 512 MB has become available. All memory different tests, including MSDiag, show no error when running with 256 or 512 MB (when available). but the laptop does not start when I change banks of 2 memory or simply use the top Bank in the lower position. I would just buy a new memory of 256 MB of memory, if I was sure that the memory and not the motherboard is the culprit. Anyone have an idea how I could fix this?

  > I would just buy a new memory of 256 MB of memory if I was sure that the memory and not
  > the motherboard is the culprit

  Therefore, the diagnostic test is necessary.
  A technician can test the memory slots with different memory modules and after these tests, it can give you a detailed report.

  I don t think that everyone here will give you a 100% solution. We can speculate and it s something wrong with the memory module or the motherboard. But a test is necessary to ensure the fault.

• Bluetooth is not recognized on Satellite Pro A100

  I have a Satellite Pro A100 828 running Win XP Pro.

  He is supposed to have integrated bluetooth but when I install the bluetooth stack, a message appears saying peripheral usb has malfunctioned and is not recognized by windows.

  In Device Manager, it is listed as an unknown device.
  I tried different versions of the bluetooth stack, but the same message still appears.

  Is there a software fix for this or does this mean that my hardware is defective? Would be grateful for any advice.

  Thank you.

  Hello

  where downloaded battery Bluetooth? And another question: do you have bluetooth never work properly? It would be interesting.
  Try another might be to download a Linux Live-CD and to check if the problem is perhaps more a hardware related issue.

  So, if you need an alternative download source then try this address:

  http://209.167.114.38/support/download/ln_byModel.asp

  Greetings

• Network controller is not recognized on Satellite A100 Windows XP

  Hi all!

  I bought a Satellite A100 PSAAR and I did a clean install of Windows XP on it. I installed all the drivers in the correct order (downloaded from the support page) but I still have a problem:

  Ethernet controller and network controller appear with a yellow exclamation point in Device Manager, and they are not recognized. I have downloaded the driver lan and I managed to do recognize the ethernet controller. However no matter how hard I tried, I can't find the correct driver for the NETWORK CONTROLLER, which still appears in Device Manager in yellow color.

  I really could use any help here... Thank you in advance.

  Hello

  Shouldn´t be a big problem to get some drivers for your machine's real lan. Just go here:

  http://www.Intel.com

  and download the intel proset for ethernet controller. If you didn t already installed the wireless card, do so. Otherwise the other network controller could be the bluetooth adapter.

  It would be nice to hear from you...

  See you soon

• Device Intel WLan 6230 USB not recognized in Satellite L655 running Win8

  I installed the Intel Centrino card 6230 WLAN for laptop Toshiba Satellite L655 of my wife (introduced to my HP laptop, but due to their allow list, it does not start... but it's another story).

  Wifi works a treat, and I'm pulling in a little more speed of 100 mb/s (http://www.speedtest.net/result/2328501761.png) to connect to my router dual band 5 GHz.

  I understand this card features also the Bluetooth capabilities and I think that is where my problem comes from.

  I get a warning balloon will appear in the system tray saying "Device not recognized USB" (http://imageshack.us/f/208/intel62301.jpg/).

  I followed various supposed fixes, including the removal of the drivers, as you can see from the photo I've already done. As I'm under Windows 8 Pro 64 bit as soon as I restart the WLAN driver is automatically re-established.

  I tried to install the drivers several times, but I always get the error message as below: -.

  http://ImageShack.us/f/41/intel62302.jpg/
  http://ImageShack.us/f/822/intel62303.jpg/

  I'm looking for one of the 2 solutions.

  1. get the device working properly - Bluetooth & Wifi - there Toshiba never do drivers for the 6230?
  2 disable the ToolTip of the USB, I can do this as a stop, but as soon as I reboot it is back bothers me!

  Any help is appreciated with gratitude.

  Hello

  I m bit confused.
  Your problem is the message: saying 'USB device not recognized '.
  Right?

  Why do you as his associates to the new wireless network card?
  I checked the screenshot you posted above and card WLan (Intel Centrino Advanced N 6230) appears in Device Manager then its recognized by Win 8, thus

  On BT taken in charge by the Intel card.
  I found this software Intel® PROSet/Wireless Bluetooth for Windows 7
  TM http://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21713&Keyword=Bluet & lang = fra
  Normally it should work with Win 8 too.
  Maybe what you are looking for.

• Problem: Memory PCI Flash not recognized on Satellite M30X

  Hello

  Windows XP does not recognize my multicard reader. That he has still put memory PCI Flash not recognized (2 locations)

  I tried - uninstall the driver (and the camera) and reboot: does not work
  -install the cardbus driver: does not work either

  Have any hint?

  Mouk

  PS: Sorry for my bad English, I'm French ;)

  Hello

  Are you sure that the card is compatible with your laptop?
  As far as I know the card on the left site reader who, only available on some models, allows you to insert and read data from the SD card, smart media (SMM) MemoryStick pro, Multimedia card and XD picture cards.

  The PC card slot supports cards PCMCIA Type II

• USB 2.0 devices are not recognized on Satellite L

  Hello

  All of the usb 2.0 device is not recognized on my laptop.
  I got a message stating that the driver are not installed. I'm looking for the driver on the support site, but could not find them...
  I've updated the bios and chip set utility, but still nothing.

  Any idea?

  Hello

  What model of laptop do you have?
  What operating system do you use?
  Since when you noticed this problem?
  Did you test all USB ports?

  Have you tested with different devices USB ports?

  Please post a little more information.

• CD/DVD drive is not recognized on Satellite Pro L10

  Hello. can someone help me with the following: -.

  My DVD drive is not recognized on my computer and in the material properties, it says that my CDW/DVD driver may be damaged and needs re-setup or "updated".

  the (r) drive is shown as TSST Corp TS-L462A - can I get the update
  Download Driver from the site? (is it free?)

  Thanks for any help

  Paul

  Hi Paul,.

  You don't say what model of laptop you have, but generally speaking if you are using Windows XP then you will use the standard Microsoft drivers for your scanner.

  However, you can Toshiba drivers and utilities download from Toshiba web site by clicking on the Support section and downloads and selection of files to download. You will need to fill in the details of your laptop so that the list of appropriate driver (unless you have provided these details when you register).

  Kind regards

• DVD is not recognized on Satellite L500-1XJ

  Hi all

  The DVD is not recognized when a dvd was released in the laptop.
  I tried to reinstall the driver but no luck.
  Does anyone have an idea?

  Thank you

  Gunter

  It is not easy to say what the problem is here.
  We don t even know what DVDs you are using.

  Maybe you should write a little more of everything cela and offer some fact and relevant information. You know, for a better understanding.

  Also which driver you have installed again?

• Serial number not recognized for Satellite L505-139

  TEMPRO V3.0 is not recognize my Satellite * L505-139 * serial and part numbers (PSLS9E-00V00WG3 and 3A018100K respectively).

  In the center of Technical Support page European [http://eu.computers.toshiba-erurope.com/innovation/genereic/SUPPORT_PORTAL/]

  (1) when the serial number has been entered, he gave * sorry your product could not be found *,.

  (2) when the automatic detection system has been selected, it was impossible to detect my system, and

  (3) when the product model has been looking for in the list of templates, the Satellite L505 - * 139 * has * not * displays, but only the-138,-h-13,-13N,-13d,-13U,-13V,-13W and - 13Z

  Someone could enlighten me please with a possible reason for this and what can be done?

  Thank you

  It is matter of Toshiba and I can imagine that there is a problem with their database.
  In any case, I don't see any problem there. At the bottom of your laptop you can find the model number and it must be xxxxxxx PSLS9E I think that this first part of the model number is so important to you.

  This will help you find the right drivers on Toshiba support page.
  Serial number is not so important. The only thing you can do with it is to check the State of the laptop computer and the details under http://www.toshiba-tro.de/unitdetails

  Can you please tell me y at - it a reason, why you need these numbers?

• SD memory cards are not recognized on satellite A200

  Hello!

  I had a Satellite A200 installed with Vista.
  When I insert the SD card into the laptop, nothing happens. My SD card does not seem to be recognized by the system.
  I tried to different maps, but none of them have been recognized.
  SD host controller is listed correctly in the Device Manager.
  I don't know what happened, but there is no problem with SD cards before you recognize.

  Thanks in advance!

  Hi there, my suggestion would be first uninstall and then reinstall the drivers from your SD controller (available for your laptop model on your regional site of Toshiba drivers). If this does not resolve the problem, then visit the following link to download an update to enable playback of higher capacity SD cards under Windows Vista: http://www.microsoft.com/downloads/details.aspx?FamilyID=e42fc131-6a76-4b27-934a-fb19dd323dab&DisplayLang=en if this fails, then make sure that you are upgraded to Service Pack 1 of Windows Vista.

  I hope this helps

• USB devices that are always hidden/not recognized on Satellite C50-A-1Jn

  Hi, hope someone can help!

  I have scoured the internet for a resolution of this problem but found nothing so far.

  Basically, I had used a hard drive on this laptop a few weeks before all of a sudden, it stopped being recognized. The hard drive light blinking always however. The hard drive has since the same thing on every PC. I thought that it was a broken hard drive BUT I tried since two of the iPhone, both of which are also unknown, BUT they will be responsible.

  I tried on other computers of the iPhone and both are very good.

  The furthest I got is to know that the hard drive is listed in Device Manager when I show "hidden devices", but I can't use it or hide from the United Nations.

  Does anyone know how to fix this? If you need more info please let me know.

  Thank you.

  If I understand you just your laptop does not recognize the external devices connected to the USB port.
  Is the same problem with all the USB ports?

  Do you use the preinstalled original Win8.1 64-bit, that you got with your machine?

• LAN adapter is not recognized on Satellite L300

  Hello

  My Satellite L300 do not recognize my network card, Wifi card is listed on the material management, but no LAN card.

  I checked in the BIOS it is activated.

  Thankx.

  Hey Buddy

  If you need help and you want other people to understand this problem, you must change your ad. Only you wrote the important thing is that you have Satellite L300. Nothing else.

  I see you post in the category of Vista, so I assume that Vista is preinstalled. All that s.

  What you have done in the past no word on this subject?
  Do you use the original preinstalled Toshiba Vista or clean install no info.

  Please be serious, provide information to better understand and I hope that we can continue to discuss later.

• Upgrade RAM not recognized by satellite A110

  I have a satellite A110-137 Partnr. PSAB6E-00Z013N5

  I use win7 on this computer because it is more stable.
  I upgraded my memory to 2048Mb yesterday, but the computer will not register more than one chip 1024Mb.

  I tried to use chips in different locations, but no response. It's ok if I insert one 1024 + 512 which is to different brands of chips but ok.
  Then what should I do?

  On the side of the download, there is an upgrade of the bios, but only for Vista.
  Please help me I'm lost in this mater.

  Arild

  >.. .computer will not register more than one chip 1024Mb.
  Is that what you saw in the BIOS settings?

  Are you sure you are using the compatible RAM modules?