program installation problem
I am trying to unstall a msi program, it starts to load then it stops and there is an error code and then says access denied
Hi William,.
- What is the name of the program?
- What is the full error message/code?
Please follow the steps to uninstall the program from the computer:
Method 1:
Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
Method 2: Please refer to the article:
How to solve problems when you install or uninstall programs on a Windows computer
http://support.Microsoft.com/kb/2438651
Let us know the result. If the problem is not resolved, we will be happy to help you further.
Tags: Windows
Similar Questions
-
with programs installation problem on windows 7
I am trying to install programs on my windows 7 Home Edition. I tried two greeting card programs that have worked well in XP. I just bought an updated version of one of them and he installed it but tells me that windows found a problem and can not run it. Have been unable to install one of my programs and am very frustrated.
Programs are probably not conpatible with you have the version of windows.
-
Installation problems drivers MEI for HP Compaq 6000 Pro MT
The OS is Windows 7 x 64.
An unknown device in device of systems management is registered as VEN_8086 DEV_3048. I think it fits with the Management Engine Interface drivers. I tried to install the HECI drivers on the site of HP (SP45411). It installs the software, but the installation fails with "an unknown error has occurred - will leave Setup."
When you try to manually install the driver I get: "Windows encountered a problem installing the software driver for your device."
My next step is to try the drivers directly from the Intel site someone at - it suggestions?
Based on this error, I found that it is actually a very common problem with these types of drivers and Windows 7 x 64 systems. The long solution is to remove completely the driver files, temporary locations, and for MEI registry entries. I couldn't be arsed with it so I just transferred the image to the WDS server and manually install drivers instead of the program installation and then rebooted the machine, now works.
-
Streets & trips 2013 details download installation problems...
The installation seems to work, but the program may not be running. Control Panel verifies that the software is installed (1.8 GB) while the installer has not created an S & T normal ICON and the software cannot be loaded even by clicking on the executable file in the program directory files. I have installed/uninstalled the program several times. Turned off Norton antivirus and firewall and Windows Firewall protection. Restarted again and again. Nothing has worked...
-Error message: "cannot find a network share or removable device, the DVD is not in the drive or installing this application is damaged. Make sure that the drive you installed is attached, the DVD is in the drive, your network is connected, or run the installation again from its original installed location. (5-40003-6) ".
ANYONE KNOW IF THERE IS A FIX FOR THIS PROBLEM YET?
Hello
Looks like you've already discovered the streets and travel Forum.
Streets & trips 2013 details download installation problems:
http://social.Microsoft.com/forums/en-us/streetsandtrips/thread/a3c90cf2-ab59-4f82-9404-a8cc0a9b9a05Concerning
-
Error code is displayed. indicates the mode without failure or installation problem, contact shop etc. where purchased.
Hi PeterLloyd,
(1) what is the complete error message you receive?
(2) what version of Windows you are using on the computer?
(3) updates are you referring?
Method 1: Try to install the program as an administrator do a right click on the program installation files and select run as administrator, click on continue if you are prompted to confirm.
Method 2: Select the boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
-
Installation problems Thrones and Patriots
Hey everybody. I have installation problems with elevation of the thrones of nations with the Patriots. I installed rise of nations but the installation successfully Thrones and Patriots he wins in a file called CTW_New_World_Map_01_info_text.xml.18 and then says check to see if I have available disk space, or if the file is in use. It's a brand new model with no other games on it.
Hi Riseofjohn,1. have you checked the disk installation for scratches or damage?2. don't you try to install the game in the other computer?3. What is the operating system that is currently installed on your computer?First of all I suggest to perform a disk cleanup and check whether the problem is resolved.The disk cleanup tool helps you free up space on your hard disk to improve your computer's performance. The tool identifies files that you can safely remove, and then allows you to choose if you want to remove some or all of the files identified.
To use disk cleanup in Windows 7 follow these steps below.a. Click Start, click programs, accessories principally made, click System Tools and then click on disk cleanup. If several readers are available, you may be asked to specify which drive you want to clean.b. when disk cleanup has calculated how much space you can free of charge, in the dialog cleaning disc, scroll through the content of the files to delete list.Disk Cleanup dialog box
c. clear the check boxes for files that you do not want to delete, and then click OK.
For more options, such as cleaning of system restore and files copy of Shadow, under Description, click on clean up the system files, and then click the other Options tab.d. When you are prompted to confirm that you want to remove the files specified, click Yes.After a few minutes, the process is completed, and close the Disk Cleanup dialog box, leaving your computer more efficient and clean better.I also suggest you to run chkdsk.Follow these steps:a. click on start
b. Type "cmd" in the start search box
c. right-click on cmd.exe list programs and then select the run as Administrator option. If you are prompted for an administrator password or for confirmation, type your password, or click on continue
d. in the command prompt window, type the following command and press enter Chkdsk/r X:Note: in this command, x is a placeholder that represents the drive letter of the volume you want to check.a. press y when you are prompted to check the drive the next time the system restarts.
b. close all applications and restart the computer.Note: upon reboot, Windows checks the drive for errors, and then Windows starts
After the computer restarts, repeat steps 1 through 4 for the other volume and then check if the disk cleanup works.If the steps provided above does not resolve the problem then I suggest to install the game using the cleanboot and check for the issue.Put your system to the clean boot state helps determine if third-party applications or startup itemsthe origin of the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and re-install the program.See KB Microsoft article below for more information on how to resolve a problem by doing aclean boot in Windows Vista or Windows 7:How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above KBarticle.I suggest also allows you to check the compatibility of the game with the Windows 7 operating system.To do this, you can visit this link below.Thank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
Program installs not because another is being installed?
My computer will not install any new program or I want to uninstall a program because it indicates a program is already installed, but I don't know what that might be. I tried to restart but he always says the same thing. What can I do?
I am on Windows Vista and I tried to download the latest version of iTunes (not on a browser, but via the iTunes pop up), but this message appeared:Another program is being installed. Please wait for this installation, and complete, and then try to reinstall this program.There is no evidence to proceed with the installation anywhere on my computer but. And I even tried uninstalling various programs to see if the problem was the iTunes, but I get the same message. Also, I tried to go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\InProgress on the computer, but the InProgress section isn't here... help?Hi Krrusso,
You can try the following steps and check if it helps.
Method 1:
You can try to start the Fixit from the following link and check if it helps.
Diagnose and solve the program installation and uninstallation problems automatically
Method 2:
You can perform a clean start and check if it helps.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
In addition, after you fix the problem, you can see step 7 above to restore your computer to a Normal startup mode.
You can also read the following article and check.
Problems installing and uninstalling programs on Windows computers
-
Applications and updates Windows installation problems
Original title: using windows vista Installer problems and having
nothing will be installed on a disk and installs very few downloads, windows update tried to install the same 14 updates and they do not know how this can be corrected
Hi DaroldMILLER,
· Did you do changes on the computer before the show?
· You get the error message?
· What applications/programs you install?
· You install updates?
· You are able to install other updates successfully?
Follow these methods.
Problem installing programs and applications:
Method 1: Follow the steps in the article.
How to solve problems when you install or uninstall programs on a Windows computer
Troubleshoot installing or uninstalling programs
Problem installing Windows updates:
Method 1: Temporarily disable the security software .
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.
Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
http://www.Microsoft.com/downloads/en/default.aspx
Method 4: Follow the steps in the article.
-
my computer is windows vista I had an ipod and tried to update my itunes prior to 9.0 because my computer told me that I had to use my new ipod, it has updated and then told me that I needed to restart my computer to make it work, so I did it and when my computer back on and I got an error message telling me that I needed to uninstall itunes and then reinstall it , so I did, but when I tried to reinstall I got this message
"An error occurred during the installation of assembly ' policy.8.0.Microsoft.VC80.CRT, version ="8.0.50727.4053", type = win32-policy", publicKeyToken = "1fc8b3b9a1e18e3b" processorArchitecture = "x 86". See Help and support for more information. HRESULT:...
I contacted apple, but they said it was a microsoft problem
someone at - it the same problem? and if so how do solve you this problem?
Hi carolinaliar,
Welcome to the Microsoft answers site!
I suggest you try the following steps:
Step 1: Use the Windows Installer Cleanup utility
Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:
http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe
Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.
In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product
290301 (http://support.microsoft.com/kb/290301/) Description of the Windows Install Cleanup
Step 2: The clean boot computer and try to install the program. http://support.Microsoft.com/kb/929135 ---> how to solve a problem by performing a clean boot in Windows Vista or in Windows 7
Perform a clean boot (see step 1 in the link); If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Important: n ' forget not the computer to start normal follow step 7 in the link.
Step 3: Try to install the program as an administrator do a right click on the program installation files and select run as administrator , click continue if you are prompted to confirm.
See links for more information:
Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.Apple.com/kb/HT1923
You can ask your question to the apple discussion forum
If the problem persists, please check with apple for more information
http://www.Apple.com/support/iTunes/
Hope this information is helpful
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
How tio changes the programs installation directory, I want to install?
How tio changes the programs installation directory, I want to install? I'm trying to install a lot of programs is always installed in "Local disk C" that low memory space. Please tell me how can I install the programs in other folders such as "Local disk D and E and F. And also please tell me that the directory in which the widows is installed when reached about his memory limit, does windows performance issues.
Win needs 15% free space for proper operation.
Using various hacks registry posted on various sites to redirect the default program installation folder to another drive is not supported by MS and can cause problems.
Most of the programs when you install them have the option for a custom install, where you can specify where / which drive to install, but not all programs have this option. Even if you install a separate drive various files/folders will be written on victory drive.
If the drives D, E & F are separate partitions of a disk, you will need to modify/extend partition in win
-
Software for 2540 all-in-one installation problem
Try to install the s/w for the all in one 2540 on an asus laptop running windows 8.1 64 bit. I get the error message c:\program 5 HP HP desk jet 2540 series\driverstore\yeti\hpvyt11.tnf install a driver package caller must be a member of the management group to install a driver package. As I am the only user on the laptop the full administrator rights so I do not understand what is happening
Hi @Fish66,
Welcome to the HP Forums!
I see that you have a problem installing the software for your HP Deskjet 2540 on your Windows 8.1. I'm happy to help with this installation problem!
To get help, I'll have to know the following:
- If the printer is connected, wireless, or USB.
- If the printer is able to make copies. Copy the text or mixed Documents.
In the meantime, try the following:
- Uninstall the software. Uninstalling the printer software. (In case it has been partially installed).
- Clean boot the computer. How to perform a boot in Windows.
- Re-install with the HP printer install wizard for Windows.
Hope this helps, and hope to hear from you soon!
-
Installation problem: IMSLib not found. Services of Acrobat will not work.
Hello
Have a new widows 10 Office pro with SSD climb like drive c: with OS and set for the D: drive to the default installation for all programs.
With Adobe Creative cloud, I tried to download the desired programs, but after many problems and failures, I gave up and I contacted Adobe.
I have been informed, if you sell products Adobe CC user must be the default C: drive. They then gently took more than an hour on a remote PC link to define the system as you wish for them
Finally, we have programs to download
Problem is Adobe Acrobat DC after launching the program I get the message ' installation problem: IMSLib not found.» Services of Acrobat will not work. »
Anyone has any idea why and what I can do about this situation - because I consider the abandonment of the CC and revert to the version of CS
Adobe, you make this so difficult why not let users decide where to install programs on the machines out there
Installation problem: IMSLIB not found. Services of Acrobat will not work.
-
Soothe a tutti ho da verzione di prova di 'first pro cs6' trovo nel pannello di controllo not nei programs installation e non riesco in any recovered a un'altra posizione Pero trovarla ' su cloud creative mi dice che e' installata my non mi this scritto apri sapreste tell e quale viene' he problema?
Hello
It seems that you have a 32 bit OS and Premiere Pro does not work on a 32 bit OS. Premiere Pro needs a 64 bit OS to work.
Thank you
Regalo
-
Flash Player: Installation problem with finding resources
I have a problem installing Flash Player. He gets 47% full and stop. Explains an error message: "Cannot find Resource '.
What resource it seeks? And how can I solve this problem? Please, any help would be greatly appreciated.
My computer is:
A Compaq laptop with
Windows 7 is
64 bit
Thank you
Ren
Please try to install using the installation program appropriate from this link:
-
Flex Builder Alpha 2 installation problem
Hi all
I have the Flex Builder Alpha 2 installation problem on my Fedora 8 64-bit. Basically, as soon as I click on the license agreement, the installer says "Please wait, Adobe_Flex_Builder_Linux is configured for your system. This may take a moment... "and then no progress at all. There is no error on the console. Someone knows how to fix this?Finally I discovered that I could not install the Flex Builder because my system is running IcedTea 1.7 x86_64. Once I turn it on to another Java (1.5.0 - gcj), the Setup program works like charm. I guess that's because the installation program stops somehow when running on IcedTea.
Maybe you are looking for
-
Satellite M30 - need suggestion about wireless
Hi people, I have a M30 with Centrino. The WiFi was working fine this morning, but the order. I tried to reconnect to my wireless bband (which works fine), but all I get is the window indicating that he expects for the network...Any suggestions?
-
HP M277dw: Cannot install Hp M277 on Windows 10
After birthday 10 Windows Update printer HP m277 stop working. I try to uninstall and install again but the problem not solved. After that 20 minutes for installation at 99%, pops up this message: "An installation operation took too long to run. It i
-
Update BIOS on Satellite C850 v6.10
Windows 7 64-bit platform. TEMPRO highlighted a V6.10 bios update.(currently in V1.6) When I try to install the update, I get a message: Flash process will end!Current platform have secure boot function, it must ensure the NV storagelocation by inter
-
Replaced the bad motherboard and cannot restore from recovery disks
I replaced a card Pegatron M2N78 - mother in a Pavilion p6130y PC and I tried to restore to the recovery disks, but he says that the restore disks will not work on this system. Really, I care is in accordance with the operating system (Vista), I don
-
I am trying to register a new addon for a PC game and I need to extract the file, when I right click, WinZip seemed to be the only thing that could extract it, but he told me that my recording session has ended and I needed to buy it. So, I uninstal