Project of Premiere pro 1.5 refusing to load

Similar Questions

• I can't open my project in Premiere Pro

  Hello!

  When I try to log on my existing project in premiere Pro, there is a window which ejects with this message

  "This project contains a sequence that can not be opened. No codec or the file is associaetes and constitute a prerequisite for the visulisation with this type of sequence.

  (Sorry, II have my first in sapnish)

  This problem happened to me before last week, but happens again and I need this project. Almost done.

  I have help apreciate.

  Thank you

  Thank you, Mark Mapes.

  I solved my problem. I had to uninstall and install again organization. Now it works well. I think the beginning of the problem because I'm doing a sequence of time and had to change from my original photos DSLR frame rates.

  Once again thanks a lot for your help. :-)

• To open a project in Premiere Pro

  Hello, when I try to open a project in Premiere Pro that I already putten much effort I get the following message:

  This sequence of project could not be oppened. No preview of the sequence is preset file or codec might be associated with this type of sequence.

  Could someone please help?

  Thank you very much.

  Hi Guiazevedo100,

  Welcome to the forums.

  Please check the link to Forum that addresses the same issue below.

  http://forums.Adobe.com/thread/1016247

  Kind regards

  Vinay

• New project from Premiere Pro bug

  Hi guys I have a huge problem with Premiere pro since the new patch whenever I'm doing a new Premiere Pro project change to how it was before and becomes like that... So I lose 2 min to do as usual, and if I once again a new project he repeats the same thing... I don't know how to fix it can anyone help me please?

  Reset the current workspace (under window/workplace)

• Premiere Pro CC 2014 crashes when loading project file

  Hi guys, any help on this is much appreciated because I have a job due in 18 hours and I'm in big trouble, if I can't solve this problem.

  I was editing a project in Adobe Premiere Pro CC 2014 (update to the latest version) and when I tried to access the same file today it gives me the error message:

  ' Sorry, a serious error has occurred which requires Adobe Premiere Pro stop. We will try to save your current project. »

  I saved the other version files and they all seem to be working properly so I know this isn't my HD which is corrupt. In fact, my suspicion is that it has something to do with a blur effect that I use. The only problem is, I can still access the file to remove the effect that the project file does not open.

  

  Information on my computer:

  I use a Macbook Pro

  OS X version 10.9.4

  2.6 Ghz Intel Core i5

  16 GB 1600 MHz DDR3 memory

  Any suggestions or comments would be appreciated.

  Guys I solved my problem - thought I'd share with you how in case no matter who else has this problem.

  I came across this thread

  First Pro CC error and crashed

  who was the suggestion -

  "Always do have after effects installed? If so, please try to import the main sequence into it and then export it as first project pro ootion file/export and then try to open in first pro. »

  This has not worked for me also, but I did try and import my existing project into a new project and copy all the files. Works fine now.

  I don't know if I'm having the same problem again tomorrow, so I'm going for rendering on a super high resolution video before I finish first in case where

• Import of projects from Premiere Pro 2.0 in first CS5.5 - bad results

  Hello people,

  I'm planing to upgrade my Premiere Pro CS5.5 2.0. I try the test version that I like very much.

  But I have problems when I try to work with my old projects.

  Indeed I can import (copies of courses) in the CS5.5 whithout any problems. But all the sequences that once consisted of many clips and titles are now only a single strip of monolytical in the timeline panel. This is the whole movie, but no clips or other components are more visible.

  I need to see everything as it was during development, not only something like the final version.

  I read several threads in this forum on open issues / inport. But they all sounded like they concerned about more basic steps.

  I can do imports, but the result is poor.

  Does anyone know the thing I have to apply - or is that really what Adobe calls "import"?

  Best regards to you all

  Trombach

  Double click on the sequence imported into the timeline panel. As they have been published, which will open the timeline with all the clips.

• NECESSARY emergency ASSISTANCE - I had a power cut this morning and when restarted my IMAC and I opened my project in Premiere Pro all content is missing how I get it back?

  I need to retrieve my project in first Pro CC I can't. can someone help me as soon as possible.

  Hi, first thing to try is to check whether the project file backup is automatically available.  If you haven't changed the drive working settings when creating the project, then automatically saves these last will be in a folder bearing mention Auto records next door where you have created/saved file .prproj work.

  Try to open one of them to see if all your clips, sequences, and your changes are present.  You may have to back up a bit and redo some work but better than losing.  Normally they record every 15 minutes up to 20 copies of the project of maintenance (unchanged).

  Don't forget to check your AutoSave preferences in future Macs: PremierePro > preferences > Autosave PC: Edit > Preferences > backup automatically.   Make sure backups Save to creative cloud as more redundancy - this requires that you change to a workstation connected to the internet.

  Good luck

• Premiere Pro CC 2014 - hangs during loading

  Hello

  I recently installed Premiere Pro CC 2014 on my laptop (see specifications below), but think that the video (my files are in general. MTS file), the window hangs and I have no other choice but to close the program. I tried to identify the source of the problem by making things a bit, but nothing has worked yet:

  • Open the smallest. MTS file I (~ 20 MB)
  • created new projects to the DV instead of HDV format
  • Open the new file at a time

  So far, nothing works.

  My computer specs are:

  • Intel Core i7-4710MQ [email protected]
  • 16 GB OF RAM
  • 64 bit
  • Windows 7 with Service Pack 1

  If you need any other info to help, please let me know. I'm new on Premiere Pro, but scope by the user of the general software.

  Thank you

  What option is selected for the Mercury playback engine?

  Have you tried switching video converter to the Mercury playback engine software only? (It would be under file > project settings > General)

  Thank you

  Regalo

• Premiere Pro CS6 closes unexpectedly when loading images or videos in the Viewer.

  I've been using CS6 since May of 2013.  I currently work on a Mac. I've never had problems. I used it one day last week, then all of a sudden a few days ago is when the problems started. Premiere Pro starts normally (new or existing project), I can even import media. But I'm not able to load Images or videos in the Viewer, and I'm able to just drag and drop on the timeline. Audio seems to drag on the timeline very well.

  I tried many things to get wrong the question such as:

  1. start a new project. (Thought maybe something in the existing project was corrupted).

  2. opening a project older that I knew worked well in the past. (In addition, the new projects of thought were corrupt.)

  3. transcoding video files. (Think of the media was corrupted).

  4 restart the computer.

  5. hold 'Shift' when you start Premiere Pro.

  I don't get the error codes, just a dialog box that says: "sorry, a serious error has occurred which requires Adobe Premiere Pro to stop. We will try to save your current project".

  Thanks for your help.

  Hi Luther.

  Welcome to the Adobe Forums.

  What version of Mac OS are you using?

  Try to repair the preferences by opening the window of finder click on go and

  Choose go to folder and type ~/library and press ENTER. Then go to Preferences > Adobe

  and rename the 6.0 6.0.old folder. If you use the Mavericks (OS 10.9) try to give permissions for the

  File Adobe as well.

  Just reply in case the problem persists.

  Thank you

• Premiere Pro 1.5 will not load

  Hello

  After a certain period of time "away" from the edition he thought time to get back in it.  However, my Premiere Pro 1.5 will not start on my computer.  (Normally), it gets to loading Wave_Warp AEX, stop, think about it for awhile, then the re-boot computer itself!  It works fine on my laptop and I tried on my desk of wives without any problem.  I tried everything I can think to stop this happening, including a full system restore with the disc format hard drive thinking HARD own would agree, but no, the same result.  I suspect there is a compatibility problem with this computer, which is a version of Win XP Media Hewlett Packard media machine running.  Any help or advice appreciated - I have spent a lot of time trying to get this to work and it's before I started to edit!

  PS I'm very much a 'home' user, and if don't want to go to load again upgrade, only to find that would have the same problem - I had an older version of the 'trial' of Pro 2.0, but that had the same result, the computer has re-boots during loading.

  Thank you very much

  MKN

  If specific to the front, this Article Adobe KB can be useful for you.

  Good luck and we hope this can help,

  Hunt

• Several versions of the same project AE Premiere Pro crash

  Hello!

  I guess this should be possible, but it seems that I do something wrong.

  I am a first Pro CS5.5 project. This is a tutorial how-not - to the that I use as an example of project to get myself started in CS5.5 AE with the body.

  Now... between the clips I want to first pro to show screens as "Lesson 1: when you don't...' then a video clip, then ' lesson 2: when you... don't ', then another clip video example." Etc...

  However, it would be nice if these screens of text between the two were animated. So I am doing a project in AE called "Lesson1", save it, just to make the text lively between the two.

  Import of the body: nice.

  Now, I would like to make the animation 'lesson 2'. I want he comes alive as in Lesson 1. So I have open project Lesson1, change the text and save it as AE project "Lesson 2. In this way, I don't do any what animation again.

  This would be the way simple, right? Instead of having to copy everything or instead of save settings predefined.

  
  It does not work.

  For some reason any body (even if AE is saved and AE is closed) now words together projects. Lesson1 indicates Lesson2 or Lesson3. It seems that AE projects are registered under different names, organization always check the versions published as an edited version or the original, with the exception of the version I want to show him.

  At some point, this will crash body or AE.

  I'll start trying to make different compositions in the same project, maybe that will work. However, why it works that way?

  Thank you

  Your workflow is a bit wonky. Here's the right way to use the AE projects within a timeline of the Organization:

  1. Select the clips you want to process in After Effects
  2. Right-click on any of the selected clips and select replace with After Effects Composition
  3. AE opens, save the project file, and then change the composition created with Dynamic Link.
  4. Do not close AE.
  5. Repeat for as many clips you need to treat in AE.

  It is always better to end up with an AE project incorporated into a chronology that integrated a lot of AE projects. I guess the crash is a dynamic link is trying to access several projects at the same time. Dynamic links can handle a handful of compositions far better that he can manage a handful of projects in the same timeline.

• Importing project in Premiere Pro CC Avid 2014?

  Hi all

  I'm a Manager, a feature of editing with an editor.

  My editor is editing through Avid Media Composer version 7.  I have also 8 Avid on my computer.  Long story short, I am not competent avid and want to import sequences, synchronized images locations, etc. in Adobe first CC 2014.  I'm not looking for something super specific.  Transitions, effects, etc.  Not a big deal.  Mostly just trying to get the bins of these newspapers synchronized in a program that I know how to change in.  (first adobe!)

  Thank you

  Bobby

  Bobby

  I do not think that there is a way to translate the garbage, but you can have your editor chained a bin of the dailies synchronized in a timeline, export the AAF and then import them into the body.

  It worked for me with some success during the tests, although I think it may depend on the versions of the body / not work very well if you use WADA in avid.

• Convert project first Clip for Premiere Pro project fails... What I am doing wrong?

  I created my first video on my iPad and now want to refine the project in Premiere Pro. I looked at him "refine a Clip of first video in Premiere Pro" and followed all the steps, but something is wrong.

  Although the XML file (and Media folder) if poster in my CC property is not available for first Pro CC (2015.2) when I choose «Convert Premiere Clip project...» ».

  I was able to import a video MP4 Roughcut, but cannot change the actual project. I tried to send the bill back (whenever 'Envoys OK' confirmation appears) & reboot PP, but it does not help. I am connected to my Adobe CC account on all devices.

  Really enjoy working with Premiere Clip, but the app is of limited use to me if I can't send Premiere Pro clip projects successfully. Help appreciated.

  Thank you

  Felicia Lovelett

  Hi Felicia,

  Sorry, you have problems! You have the desktop app creative Cloud installed, with synchronization of file running? This will synchronize your projects first Clip and media locally on your computer, allowing Premiere Pro to open. (If you only synchronize your active CC Web Storage, Premiere Pro is not able to access.)

  From the desktop application creative cloud in your menu bar, click the gear icon, and then click Preferences. Click the files tab, and verify that the synchronization is on. Here is also where you can see the location of your creative cloud on your computer folder. When you choose "Convert first Clip Project" in Premiere Pro, it should point to this folder on your computer.

  Please let me know if it helps!

  Thank you

  Bronwyn

• How can I download presets required for Premiere Pro CC 2014

  We are trying to bring back the predefined default settings, followed the instructions via assistance troubleshooting on the Support of Adobe Web site, using the combination of SHIFT + ALT (Option), but does not have the predefined default settings return.

  If anyone can help, it will be appreciated muchly.

  Thank you

  Paul

  Hi Paul,.

  You can download Premiere Pro Presets or content functional from the link below:

  Library, title, missing model projects templates: Premiere Pro, After Effects, yet

  Kind regards

  Navdeep Pandey

• No text no not in Premiere Pro

  I created a slide show in the first Clip and added a few slides of text. The project settings are all verified - that is to say fade in, out, crossfade, movement. The text is visible as expected when I saved the film.

  Then, I used Edit in Premiere Pro and opens the project in Premiere Pro. However, even if his script displays text clips where planned, there is no text in them and previews of movies with background color during these periods. Double click on the text element takes me into a text editor, but the text is not present (for example it is not black text on a black background).

  Any ideas?

  John

  Hi John,.

  Your message led us to the discovery of a bug in the Exchange with Premiere Pro. Namely, if the title text contains a 'special character' (e.g., ampersand), then the first fails to import the entire title. To determine if this is the problem, please post the exact text of a title that is displayed without text in Premiere Pro.

  In addition, exactly which versions of the Clip and body are you running?