PROLEM USING MOBILE & FIXED

Similar Questions

• Costume measurement OR for Mobile/Fixed WiMAX 1.0, is there any optiion to activate PUSC or AMC for the generated signal?

  Hello.

  I use a VST OR to generate the WiMAX signal. I installed NO measure costume for Mobile/Fixed WiMAX 1.0 on the calculation. But I can't find any option on the front panel of the combination of the generation to enable AMC or PUSC for generated signal. This feature exist at all?

  Thank you.

  Hello sam2013ni,

  That's all I see for AMC and PUSC. Look in "box Type".

  

  

  Best regards

• Its microphone is not heard when you place a PC-to-PC or mobile / fixed call

  • Dear Experts.
  • I use Dell Inspiron 1525 model with Microsoft Vista operating system...
  • When I connect my headphone + microphone to my laptop and if I try to use the calls from pc to pc or pc to mobile / fixed phone call, the person on the other side does not correctly receive my voice.
  • For them, my voice will appear as female (strange voice).
  • On l ' other I can hear them properly without any problem.
  • I tried to fix this problem through various options in the Control Panel, but always without success.
  • Kindly advice on that.

  Hello

  Check with Dell, their documentation technical support online and drivers, as well as the well-known Dell forums
  questions. Maybe you need a new mic and the issue could be on the other side, unless it happens with
  several others. Check with Skype or other software you use.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  -----------------------------------------------------------------------------------------------------------------

  Try this:

  Click on an icon of right speaker near right lower clock - recording devices

  Select tab improvements - properties (right same low page) - MIC check Disable all sounds effect apply - OK

  -----------------------------------------------------------------------------------------------------------------

  Pilots may also need to be updated:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
  Audio (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• iPhone 5 battery runs very quickly when using mobile data

  When I use mobile data on my iPhone 5, the battery seems to run out quickly. When I say fast, I mean very quickly, it will drop 100% completely dead in 20 minutes. What I do when I use mobile data is send some Snapchats and that's all. I left mobile data on, I have it on when I need to use it. I tried using mobile data for other things, and the same thing happens. Sometimes the phone will completely die to about 40% of the battery being left. I am almost convinced that I need at this point a new battery for my phone. Finally, I want to mention that these problems don't happen when you use mobile data, WiFi. Does anyone have any suggestions?

  iOS: version 9.0.2

  See the following article:

  https://www.Apple.com/support/iPhone5-battery/

  In addition, download the app from the battery life and see what it says about the health of your battery.

• How to use mobile data for large app download data

  How to use mobile data for large app download data

  How can I set big data

• How to download using mobile data instead of a Wi - Fi connection

  Dear Sir.

  I use iPhone 6s. I would like to ask for your help as to how I could use mobile data to download for the software updates. There was always a prompt message to inform that I could download when connected to a Wi - Fi network.

  Hoping to hear from you soon.

  Thank you.

  Sorry, you can not. WiFi or iTunes.

• I use images fixed high resolution but when the vid play they blur. They look strong when I stop. ***?!

  I use images fixed high resolution but when the vid play they blur. They look strong when I stop. ***?!

  Never had this problem before or on iMovie.

  Try to set a better quality in the view drop-down list top right of the Viewer window.

• My account tempererly blocked Hotmail I can't check using mobile reson the service unavailable in Bahrain

  My Hotmail account asking me to check using mobile I provided the mobile phone number, but I don't get the verification code
  I brought 3 days a response will, but not all please can someone help me to activate my account, still I can connect to my Hotmail account but unable to connect to the chat messenger and cant with friends

  Submit all Hotmail queries on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/

• matsgetsapccatalog: cannot use microsoft fixit

  cannot use microsoft fixit

  Hi allyoop432,

  1. what happens when you try to run the fix it? You get the error message?

  2. why you try to run the fix it?

  3. where did you download the fix it?

  Does your message contain all of the required information. View the required information.

  In addition, I suggest you send your query in Microsoft Fix it Center for better support.

• Problem using Mr Fixit

  I used Mr Fixit from Microsoft to reset my default hosts file and now there is no Hosts file in C:/windows/drivers/etc/my browsers work. What should I do?

  Thanks PML. This discussion is useful. The Hosts file FAQ is not very useful.

  If the hosts on 135kb files are bad, why the MVP recommend a 608 kb?

  The hosts file, kidnapped by Mr Fixit has been 407KO. Wouldn't that one be better than the biggest MVPS hosts file?

  How can I reverse the changes made by Mr Fixit from Microsoft Support? I tried the system restore, but it did not work. Is there anyway that I can use the hosts.old file?

  Also shouldn't you or someone tell Microsoft that is hosts by default file reset program is defective and remove the hosts file?

  Finally, your best judgment. I would be better to use the huge MVPS hosts file? What features I'll lose by disabling services.msc, as recommended?

  Additional questions. What is the hosts.*.backup? (* indicates an alphanumeric string.) What was the purpose of the 86 hosts.*.backup files that I deleted? A BAK file is similar to a backup file? What is the difference? Can I use the backup file to re-create the hosts file?

  I do not use a file hosts at all, so I can't answer from personal experience.  However, it is not the size of the hosts file that is important, it is what is in it.  Point entries in any "anti-malware" hosts file (there may be other reasons to use a hosts file, but anti-malware is most common for individuals) is to deal with HTML code hidden on a web page which redirects the web browser to an unwanted site.

  Suppose that someone has written a webpage so that when get you there, it tells your browser to www.stealmyidentity.com.  If someone ' one - as the people who compiled the MVPS hosts file - aware of this site and puts an entry in hosts like this
  127.0.0.1 www.stealmyidentity.com
  When the HTML code is executed, your browser will then the IP address 127.0.0.1 instead of the IP address of the wrong site.  127.0.0.1 is the IP address of 'closure' of your computer (which is why the logo at the top of web page MVPS hosts said "There is no place like 127.0.0.1").

  Thus, you can't compare your old hosts file 407KO with the hosts of MVP 608 kb file and say that the first one was "better".  No, it's probably not best, because it lists less "bad" sites.

  I know not the details of why a leader hosts more than 135 k could slow things down, but given that 407KO is so much greater than 135 k, I guess that from a performance point of view, 407 kb is not much better than 608KO either.  And in any case, MVP web page gives you a procedure to deal with this potential to slow down.  And you're not disable services.msc - you use services.msc to disable the DNS Client service.  Note also that the definition of a service on 'manual' is not the same as 'off '.  Defining a service to "Manual" just will not start the service until something he needs.

  I suggest to use the MVPS hosts file and set the DNS Client service on 'manual' as suggested.  If this is a problem, you can just go back to the default hosts file and set the Client DNS service on 'automatic', which is the default value.

  You seem to be correct only the Microsoft FixIt routine (in the future, remember to identify the Knowledge Base article that includes the FixIt you speak because Microsoft has a lot of different routines "FixIt") does not quite what it says it will do.  What routine FixIt seems to do is rename the file hosts in hosts.old.  This brings the system to what I recall is the State of the default system - no hosts file at all.  If you want then the hosts 'default' file, you copy the example of hosts (hosts.sam) file to a new file named simply hosts (with no file extension).

  In this case, a file *.backup or master is just the previous hosts.  It seems as if you were using a service that regularly gave you a new hosts file.  Rather than simply replacing your existing with a new hosts file, this service renamed your current file and then created a new.  There is no good reason to keep 86 versions old what whatsoever.

  To "recreate" the hosts.old hosts, hosts.bak file host.backup or hosts.backup75 file, just rename to remove the file extension.  You can watch one of these files in the notebook, but because the file extension is not txt, when you double-click a master file or use 'open with', you will get the dialog box asking you to select the program to open the file in the list.  Simply choose the notebook and're you good to go.

• Location using mobile data

  My mobile data is turned off and I am connected to my WiFi. Whenever any application uses location my phone connects for a second to the network and uses mobile data, mobile data are always off. As I use a prepaid SIM, I have to pay for the use of data in 15 minutes, even if my phone connects just for a second. Either I can disable location or delete the APN to solve the problem for now, but it is not a real solution. Someone has an idea?

  What you can try instead of delete the APN is to edit and check the APN type. If the APN type contains "extra", delete and save the APN.

  The GPS in the phone supports assisted startup and can use the mobile network to get your site faster than a normal GPS. Remove "extra" may prevent him from doing it.

• After having used Mr. Fixit, I now have this 80072EE2 error code. How can I solve this problem?

  How to solve the following problem?

  After using Mr. Fixit to solve this error code 80072EE2, I now have Windows Update, error 0 x 80070057 (2015-10-19-T-11_18_08A not fixed and the recent updates installation issues also do not set. I am running Win 7 Home Premium 64-bit.   How can I solve this problem?

  Thank you

  Harmony

  I really appreciate your response, however, I was able to solve it with the system restore and reinstallation of several windows updates.

  It turned out that a third-party software was the culprit.  Once I made this discovery, I reinstalled the software uninstalled, and carried out the system restore and updates.

  Thanks again!

  Scootslee

• Issue report 9380/9790 using {position: fixed; top: 0em; width: 100%; background: #00F ;}}

  Dear Support forum,

  Has anyone else seen make artifacts when using position: fixed; on a 9380?

  I have a header and a footer with width bot: 100% using position: fixed to pin them on the top and the bottom.

  It works very well on a lot of blackberries, but in portrait mode on the 9380, a bar I get strange white ghost on the side:

  

  He is not seen in landscape mode:

  

  Although lack us a wide column of pixel made now on the left side.

  The 9790 makes the screen very well, but it should also be noted there a line of pixel on the merits in this case, given while the footer shows clearly: {position: fixed; low: 0em; width: 100% ;}}

  

  Example can be found here:

  http://www.Arche-it.com/BBDev/RenderIssue/index.html

  I can't reproduce this with another device. You can try the 9380 update to a more recent software, as 1647 (7.1.0.523) set that is available through many carriers? It is possible, that it's been fixed it.

• my store is not act immediately after I had to repair in order to open a session, I know there is a command, I can use to fix the store but don't remember. can anyone help?

  my store is not act immediately after I had to repair in order to open a session, I know there is a command, I can use to fix the store but don't remember. can anyone help?

  To avoid confusion and duplication of effort, please post a follow-up later all replies to your original thread...

  I had a virus that forced me to the factory reset, but now I can't update anything, error 0 x 80070057 I get n missing or corrupted registry. . troubleshooting of said Windows upgrade fixed it but the same thing happens...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-update/that-forced-me-to-factory-reset-but-now-i-cant-do/11a02043-468B-4D6F-8c9d-d82a2868685d

  Thank you.

• If I already have a teacher and student account creative Cloud can I also use mobile applications

  If I already have a teacher and student account creative Cloud can I also use mobile applications

  What is in the set of Cloud http://www.adobe.com/creativecloud/catalog/desktop.html

  -http://www.adobe.com/products/catalog/mobile._sl_id-contentfilter_sl_catalog_sl_mobiledevi ces.html